Flir a325 Thermal Camera Datasheet
2
GenICam and GigE Vision Compliant Plug-and-Play Compatibility Third Party Software Compliant (NI Vision Builder, IMAQ, Common Vision Blox, Visual Basic, Visual C++, etc.) Supported by FLIR Software Packages Precision Non-contact Temperature Measurements Maintenance-free, Uncooled, Microbolometer Detector Longwave Imaging Performance Compact, Rugged, and Lightweight Affordable Machine Vision The A325 is an affordable way to add thermographic imaging and non-contact temperature measurements to machine vision systems. Adding this IR functionality is no more complex than adding a visual image camera, and provides a similar level of flexibility in developing the command and control program. Accurate Non-contact Temperature Measurement The A325 is designed to deliver accurate thermographic imaging and repeatable temperature measurements in a wide range of applications. Each thermal image is built from over 76,000 individual picture elements that are sampled by the camera’s on-board electronics and firmware. The data can then be used to monitor and help control a production process or automation system. Easy Plug and Play Operation The A325 is an ideal system integration solution due to its universal plug and play (uPnP) protocol and GigE Vision Control protocol. Simply connect the camera to a PC and produce high-quality near-real-time thermographic images. With a standard PC interface, the camera can be fully configured from the PC, allowing command, control and collection of full frame data from the A325 in real time. Gigabit Ethernet Data Transfer The A325 is equipped with an RJ-45 Gigabit Ethernet connection that supplies 14-bit 320x240 images at 60 Hz, and linear temperature data. These signals are compatible with any software that is GenICam compliant. Precise Timing and Control There are separate digital I/O connections to eliminate communication latencies in timing and control. Two types of optically isolated connections are provided. The GPIO allows digital in for shutter disable, and digital out for program control. There is also a V-sync connector for triggering and synchronization. Compact, Rugged, and Lightweight Compact and lightweight, the powerful A325 fits easily into most machine vision and automation systems. Its straightforward 3-sided mounting allows quick installation, and it can be easily moved when application requirements change. Tailored To Your Application As with all its products, FLIR Systems offers a complete series of accessories, including close-up and wide-angle lenses, to suit the most demanding applications. The A325 is supported by a variety of FLIR software packages, including Researcher 2.9 for R&D or as a pre-configured Automation HMI, Software Developer’s kit for Visual Basic and Visual C++ programming and LabView Toolkit for seamless compatibility with National Instruments LabView software. NEW! FLIR A325 ® INFRARED CAMERA SYSTEM ® The affordable A325 is designed for integration into machine vision and automation systems that require non-contact imaging and temperature measurements. It operates similar to sophisticated visual cameras used in industrial applications, and has standard interfaces for easy deployment and connection to back-end systems and networks via Gigabit Ethernet.
-
Upload
vilarinho6575 -
Category
Documents
-
view
28 -
download
1
Transcript of Flir a325 Thermal Camera Datasheet
GenICamandGigEVision Compliant
Plug-and-Play Compatibility
Third Party Software Compliant (NIVision Builder,IMAQ, CommonVision Blox,Visual Basic,VisualC++, etc.)
Supported by FLIR Software Packages
PrecisionNon-contactTemperatureMeasurements
Maintenance-free, Uncooled,Microbolometer Detector
Longwave Imaging Performance
Compact, Rugged, and Lightweight
Affordable Machine VisionThe A325 is an affordable way to addthermographic imaging and non-contacttemperature measurements to machinevision systems. Adding this IR functionalityis no more complex than adding a visualimage camera, and provides a similar levelof flexibility in developing the commandand control program.
Accurate Non-contactTemperature MeasurementThe A325 is designed to deliver accuratethermographic imaging and repeatabletemperature measurements in a wide rangeof applications. Each thermal image is builtfrom over 76,000 individual pictureelements that are sampled by the camera’son-board electronics and firmware. The datacan then be used to monitor and helpcontrol a production process or automationsystem.
Easy Plug and Play OperationThe A325 is an ideal system integrationsolution due to its universal plug and play(uPnP) protocol and GigE Vision Controlprotocol. Simply connect the camera to a PCand produce high-quality near-real-timethermographic images. With a standard PCinterface, the camera can be fullyconfigured from the PC, allowing command,control and collection of full frame datafrom the A325 in real time.
Gigabit Ethernet Data TransferThe A325 is equipped with an RJ-45 GigabitEthernet connection that supplies 14-bit320x240 images at 60 Hz, and lineartemperature data. These signals arecompatible with any software that isGenICam compliant.
Precise Timing and ControlThere are separate digital I/O connections toeliminate communication latencies intiming and control. Two types of opticallyisolated connections are provided. The GPIOallows digital in for shutter disable, anddigital out for program control. There is alsoa V-sync connector for triggering andsynchronization.
Compact, Rugged, and LightweightCompact and lightweight, the powerfulA325 fits easily into most machine visionand automation systems. Its straightforward3-sided mounting allows quick installation,and it can be easily moved whenapplication requirements change.
Tailored To Your ApplicationAs with all its products, FLIR Systems offers acomplete series of accessories, includingclose-up and wide-angle lenses, to suit themost demanding applications. The A325 issupported by a variety of FLIR softwarepackages, including Researcher 2.9 for R&Dor as a pre-configured Automation HMI,Software Developer’s kit for Visual Basic andVisual C++ programming and LabViewToolkit for seamless compatibility withNational Instruments LabView software.
NEW! FLIR A325®INFRARED CAMERA SYSTEM®
The affordable A325 is designed for integration intomachine vision and automation systems that requirenon-contact imaging and temperature measurements. Itoperates similar to sophisticated visual cameras used inindustrial applications, and has standard interfaces foreasy deployment and connection to back-end systemsand networks via Gigabit Ethernet.
1 800 464 6372www.goinfrared.com
Specifications subject to change. ©Copyright 2008, FLIR Systems, Inc. All rights reserved. A325 052108
FLIR® A325 Specifications
Imaging PerformanceField of View Built in 25° × 18.8°/0.4m (1.3 ft.)
Focusing Auto focus, motorized manual
Detector Type Focal Plane Array (FPA), uncooledmicrobolometer
Spectral Range 7.5 to 13.0 µm
Pixel Resolution 320×240
Measurement
Temperature Ranges–20°C to +120°C (–4°F to 248°F)0°C to +350°C (32°F to 662°F)Optional up to +1200°C (2192°F)
Thermal Sensitivity (NETD) <0.07°C (<0.14°F) @ +30°C (+86°F)
Accuracy (% of Reading) ±2°C or ±2%
Image Presentation14-bit Signal w. Radiometricdata, FLIR proprietary
Full FPA frame rate up to 60Hz14-bit image signal, GigE
14-bit temperature, linear GigE
EnvironmentalOperating temperature range –15°C to +50°C (+5°F to +122°F)
Storage temperature range –40°C to +70°C (–40°F to +158°F)
Humidity (operating and storage)IEC 60068-2-30/24 h 95% relativehumidity +25°C to +40°C (+77°Fto +104°F)
Encapsulation IP 40 (IEC 60529)
Bump, Operational 25 g (IEC 60068-2-29)
Vibration, Operational 2 g (IEC 60068-2-6)
EMCEN 61000-6-2:2001 (Immunity)EN 61000-6-3:2001 (Emission), FCC47 CFR Part 15 Class B (Emission)
Physical CharacteristicsWeight, total for operational system 0.7 kg (1.54 lb.)
Size, Camera body including handle,L ×W × H
170 × 70 × 70 mm(6.7 × 2.8 × 2.8 in.)
Base Mounting 2 × M4 thread mounting holes(on three sides)
Tripod Mounting UNC 1/4"-20 (on three sides)
Included ComponentsPower supply 90-220V AC in, 12V out Part No. 1910585
Power cable Standard 2-wire w/ground
Power cable to Camera pigtailed Part No. 1910586
Ethernet cable CAT-6, 2m
Utility CD with drivers IP Config and IR Monitorprograms
AccessoriesTelephoto lens, 15-degree 1196724
Wide angle lens, 45-degree 1196725
Hard case 1196940
ThemoVision SDK Toolkit 1197038
FLIR LabView Toolkit 1197039
ThermaCAM Researcher, v2.9 Basic 1196150
ThermaCAM Researcher, v2.9 Pro 1197020
FLIR A325
Power Connector, Screw Terminal 2-pole: 10–30VDC, <10W.
Ethernet Port, 1000 MB, RJ-45 Connector: Control and image streaming.
Digital I/O Connector, Screw Terminal 6-pole: Digital Out: 2 outputs, opto-isolated,10–30V supply, 100 mA. Digital In: 2 inputs, opto-isolated, 10–30V.
1
2
3
21
3
