Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management...
Transcript of Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management...
![Page 1: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/1.jpg)
Flip-Chip Assembly for
Focal Plane Array
May 28th, 2014 Flip-Chip Assembly for FPA1
ORION CONFERENCE
Moscow, May 28th, 2014
Jean-Stéphane MOTTET
SET CORPORATION S.A.
Smart Equipment Technology, France
![Page 2: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/2.jpg)
OUTLINE
Wave lengths
Applications
Materials
Flip-chip assembly
SET experience and solutions
Conclusion
May 28th, 2014 Flip-Chip Assembly for FPA2
Flip-Chip Assembly for
Focal Plane Array
![Page 3: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/3.jpg)
WAVE LENGHT
FPA can detect different wave lengths:
Infrared
May 28th, 2014 Flip-Chip Assembly for FPA3
Gamma
Ultra violet
X-Ray
Infrared
X-Ray
Gamma
Ultra violet Visible
![Page 4: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/4.jpg)
SOME APPLICATIONS
Infrared is the radiation of heat energy, related to the
temperature of objects
Visible image Infrared image
Warmer
Cooler
May 28th, 2014 Flip-Chip Assembly for FPA4
![Page 5: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/5.jpg)
INFRARED APPLICATIONS
Military Night Vision
Space / Astronomy
Industrial Security/Law Enforcement
Weather SatellitesEnergy conservation
MedicineAutomotive Night Vision
May 28th, 2014 Flip-Chip Assembly for FPA5
![Page 6: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/6.jpg)
X-RAY APPLICATIONS
May 28th, 2014 Flip-Chip Assembly for FPA6
Medical Industry
Voids on a glued BGAShorted vias in a 3D package
Cameras for dentist/medical
applications
In the industry for assembly
analysis
![Page 7: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/7.jpg)
GAMMA AND UV APPLICATIONS
May 28th, 2014 Flip-Chip Assembly for FPA7
Research
Aerospace
Research for scientist experiences
Aerospace applications give higher
inspection capacities
CERN (Switzerland): Higgs boson
Andromeda galaxy
(UV picture)
Andromeda galaxy
(visible light picture)
![Page 8: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/8.jpg)
FPA DETECTORS AND BUMPS
May 28th, 2014 Flip-Chip Assembly for FPA8
Infrared detectors
Joint shaping on indium bumps (15 µm pitch)
Source: CEA-LETI
Microtubes (10 µm pitch)
Source: CEA-LETI
Source: AIM Infrarot-Module
Reflow indium bumps (15 µm pitch)
![Page 9: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/9.jpg)
FLIP-CHIP BUMPS
Conventional flip-chip solder ball
Indium-bumped
FPA today
Indium-bumped
FPA tomorrow
50 µm
8 µm
8 µm
15 µm 4 µm
4 µm
8 µm
May 28th, 2014 Flip-Chip Assembly for FPA9
![Page 10: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/10.jpg)
FPA CHALLENGES: SMALLER PIXEL & BUMP SIZE
2 different approaches with bump-to bump and
bump-to-pad.
Very important for FPA:
Sub-micron alignment in XYӨ,
Guaranty parallelism,
Deal with strong oxide layer on tiny indium
bumps.
May 28th, 2014 Flip-Chip Assembly for FPA10
4 µm
4 µm
8 µm
4 µm
8 µm
Bump-to-pad
Bump-to-bump
![Page 11: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/11.jpg)
FLIP-CHIP ASSEMBLY
May 28th, 2014 Flip-Chip Assembly for FPA11
Several techniques:
Thermo-compression or Room temperature compression,
Tacking + reflow in oven (under controlled atmosphere),
In-situ reflow with chemical flux,
In-situ reflow with mechanical scrubbing,
In-situ reflow with formic acid vapor.
![Page 12: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/12.jpg)
FLIP-CHIP ASSEMBLY
Thermo-compression or Room temperature compression
May 28th, 2014 Flip-Chip Assembly for FPA12
REQUIRES:
High accuracy for alignment and parallelism,
High pressure/force linked to size/number of bumps,
Sensitive and accurate force control from touch-down, up to
final force,
High stiffness of bonder to maintain alignment and parallelism
accuracy when applying force,
Good management of the thermal expansion during bonding.
Note: Oxide is broken when applying the force.
Pros: Low temperature process (even room temperature)
Cons: Oxide residues stay in the indium bumps
![Page 13: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/13.jpg)
FLIP-CHIP ASSEMBLY
Thermo-compression or Room temperature compression
May 28th, 2014 Flip-Chip Assembly for FPA13
Current state-of-the-art is 4kx4k pixel arrays.
6kx6k pixel arrays are being attempted now.
Larger arrays are coming.
![Page 14: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/14.jpg)
FLIP-CHIP ASSEMBLY
Tacking + Reflow in oven
May 28th, 2014 Flip-Chip Assembly for FPA14
REQUIRES:
Chemical flux,
High accuracy for alignment and parallelism,
Sensitive and accurate force control from touch-down to final
force,
External oven (under controlled atmosphere).
Pros: Low force tacking. Many assemblies are reflowed
simultaneously (high throughput)
Cons: Transfer from bonder to oven is very delicate can
affect the alignment; After reflow, flux must be cleaned
difficult process because small gap between the dies
![Page 15: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/15.jpg)
FLIP-CHIP ASSEMBLY
In-situ reflow with chemical flux
May 28th, 2014 Flip-Chip Assembly for FPA15
REQUIRES:
Chemical flux,
High accuracy for alignment and parallelism,
Sensitive and accurate force control from touch-down to final
force,
Good management of the thermal expansion during reflow.
Pros: Components are secured during the entire process;
oxide is easily removed; quality of indium joint is very good
Cons: Dispense of chemical flux is not a clean process not
compatible with high accuracy bonder; After reflow, flux must
be cleaned difficult process because difficult access
between the dies
![Page 16: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/16.jpg)
FLIP-CHIP ASSEMBLY
In-situ reflow with mechanical scrubbing
May 28th, 2014 Flip-Chip Assembly for FPA16
REQUIRES:
High accuracy for alignment and parallelism,
Sensitive and accurate force control from touch-down to final
force,
Good management of the thermal expansion during reflow,
Mechanical scrubbing system which respects the high
alignment accuracy.
Note: Oxide is broken when applying the force.
Pros: No post bond cleaning because no flux
Cons: Oxide residues stay in the indium bumps; difficult to
keep the alignment accuracy after scrubbing
![Page 17: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/17.jpg)
FLIP-CHIP ASSEMBLY
In-situ reflow
May 28th, 2014 Flip-Chip Assembly for FPA17
Reflow of FPAs up to 1kx1k has been demonstrated using
chemical flux or scrubbing to break through indium bump
oxide skin,
However, larger arrays would require more scrubbing force
which is not compatible with the high alignment accuracy
required by tiny bumps and small pitches,
Large arrays have also their own thermal expansion (≠ CTE
between detector and ROIC), then mismatch at high
temperature.
![Page 18: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/18.jpg)
FLIP-CHIP ASSEMBLY
In-situ reflow with formic acid vapor
May 28th, 2014 Flip-Chip Assembly for FPA18
REQUIRES:
High accuracy for alignment and parallelism,
Sensitive and accurate force control from touch-down to final
force,
Good management of the thermal expansion,
Gas control (formic acid vapor).
Pros: Oxide is easily removed; quality of indium joint is very
good; no post-reflow cleaning; formic acid cleaning offers a
good surface preparation to flow the underfill material
Cons: Long desoxidation process (2 to 4 minutes)
![Page 19: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/19.jpg)
FLIP-CHIP ASSEMBLY
Microtubes
May 28th, 2014 Flip-Chip Assembly for FPA19
Technique patented by CEA-Leti
REQUIRES:
CEA-Leti Patent to develop the microtubes before assembly,
High accuracy for alignment and parallelism,
Sensitive and accurate force control from touch-down to final
force.
Note: Oxide is broken when applying the force.
Pros: Low temperature process (even room temperature)
Cons: Oxide residues stay in the interconnexion; Requires a
patent
Microtubes (10 µm pitch)
Source: CEA-LETI
![Page 20: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/20.jpg)
Focal Plane Array,
the SET
experience & solutions
May 28th, 2014 Flip-Chip Assembly for FPA20
![Page 21: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/21.jpg)
SET EXPERIENCE AND SOLUTIONS
May 28th, 2014 Flip-Chip Assembly for FPA21
SET builds equipment since over 30 years for FPA applications.
All techniques can be done on the same platforms.
Company created in 1975 (39 years ago)
1982: Beginning of flip-chip with Reflow + flux techniques with
CEA-Leti,
Since the 90’s: Development of high force / room temperature
solutions in collaboration with American private companies,
2008: Introduction of formic acid vapor solution, qualified by
several important names of FPA manufacturers in the world,
2010: CEA-Leti technique with microtubes developed on SET
Bonder.
![Page 22: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/22.jpg)
confidentialMay 28th, 2014 Flip-Chip Assembly for FPA22
SET PORT-FOLIO
0.5 µm
0.5 µm
3 µm
1 µm
![Page 23: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/23.jpg)
SET SOLUTIONS
FC150 – R&D BONDER
Bumps pitch down to 15 µm
1 µm post-bond accuracy
Force from 25 g to 200 kg
Temperature up to 450°C
High Process Flexibility: Thermo-compression
Room temperature compression
Reflow
Formic acid vapor
Automatic mode for production
May 28th, 2014 Flip-Chip Assembly for FPA23
![Page 24: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/24.jpg)
SET SOLUTIONS
FC300 – R&D BONDER
Bumps pitch down to 5 µm
0,5 µm post-bond accuracy
Force from 100 g to 400 kg
Temperature up to 450°C
High Process Flexibility: Thermo-compression
Room temperature compression
Reflow
Formic acid vapor
Automatic mode for production
May 28th, 2014 Flip-Chip Assembly for FPA24
![Page 25: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/25.jpg)
SET SOLUTIONS
Oxide removal with formic acid vapor
May 28th, 2014 Flip-Chip Assembly for FPA25
Formic acid vapor is built-in thanks to an evaporator
Allows to: Remove oxide on bumps,
Shape the bumps,
Generate a good adhesion indium-to-indium bumps,
Get a good diffusion of indium bumps on gold pads
Additional benefit: Get better flow of underfill
Unique concept based of semi-open chamber with injection of formic acid vapor (patented)
All vapors are exhausted for safe use
![Page 26: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/26.jpg)
SET SOLUTIONS
LDP150 – LARGE DEVICE PRESS
When arrays become very large (i.e. 4kx4k), very
high force is required at room temperature.
Detector and ROIC are aligned and pre-bonded on
FC150 or FC300, then LDP150 applies the remaining
pressure.
XY accuracy is maintained within 3 µm
Parallelism is maintained
Self levelling system
Force up to 10,000 kg
Room temperature
May 28th, 2014 Flip-Chip Assembly for FPA26
![Page 27: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/27.jpg)
CONCLUSION
FPAs market is growing.
The challenges are very well identified:
Array size is increasing higher bonding force is required,
Pixel size is shrinking higher bonding accuracy is required.
The flip-chip method must be chosen according to the
constraints of the final products/applications. The size and
pitch of the bumps are key parameters.
To get a good FPA, the flip-chip assembly must be accurate
and the bonder must flexible to run all these different
techniques on the same platform, from R&D to production
purposes.
May 28th, 2014 Flip-Chip Assembly for FPA27
![Page 28: Flip-Chip Assembly for FPA - Amazon Web Servicesproxy.siteo.com.s3.amazonaws.com/...Good management of the thermal expansion during reflow, Mechanical scrubbing system which respects](https://reader036.fdocuments.in/reader036/viewer/2022081614/5fcb39c6609cb8660f661de9/html5/thumbnails/28.jpg)
28
Jean-Stéphane MOTTET
+33 450 358 392
SET CORPORATION S.A.
131 impasse Barteudet - 74490 Saint-Jeoire - FRANCE
www.set-sas.fr
Thank you for your attention.
May 28th, 2014 Flip-Chip Assembly for FPA
Flip-Chip Assembly for
Focal Plane Array