FLIGHT Run Jig Instructions V1 - media.viewrail.com
1
• Line up the next tread so that it is touching the flight jigs • Slide both jigs on to the first tread so that the adjustment block rests up against the nose of the tread • Set the adjustment block to that dimension on both jigs • Following the FLIGHT instructions, install the 1st tread • Find the run measurement(s) indicated in the shop drawings provided to you 4 3 2 1 © 2021 VIEWRAIL All Rights Reserved · (866) 261-8013 · viewrail.com · For Helpful Tutorials go to www.youtube.com/viewrail FLIGHT Run Jig Instructions V1 Modified: 08/09/2021 • Using the supplied fasteners, secure the tread to the stringer bracket • Repeat these steps for the rest of the flight • Use a level to ensure the tread is plumb 6 5 FLIGHT Run Jig Instructions
Transcript of FLIGHT Run Jig Instructions V1 - media.viewrail.com
• Line up the next tread so that it is touching the flight jigs• Slide both jigs on to the first tread so that the adjustment block rests up against the nose of the tread
• Set the adjustment block to that dimension on both jigs• Following the FLIGHT instructions, install the 1st tread
• Find the run measurement(s) indicated in the shop drawings provided to you
43
21
© 2021 VIEWRAIL All Rights Reserved · (866) 261-8013 · viewrail.com · For Helpful Tutorials go to www.youtube.com/viewrailFLIGHT Run Jig Instructions V1 Modified: 08/09/2021
• Using the supplied fasteners, secure the tread to the stringer bracket
• Repeat these steps for the rest of the flight
• Use a level to ensure the tread is plumb
65
FLIGHT Run Jig Instructions
