F.L.G. GT. MULTI- TEMPERATURE GREASE.
Transcript of F.L.G. GT. MULTI- TEMPERATURE GREASE.
F.L.G. GT.MULTI- TEMPERATURE GREASE.
>BENEFITS
A F U C H S L U B R I C A N T S P R O D U C T
Rivolta F.L.G. GT is a fully synthetic high performance lubricant for the
food, pharmaceutical and feed industry. F.L.G. GT is a workstable, extremely
water-resistant, high temperature-stable synthetic grease developed for
heavily loaded roller and plain bearings in a wide operative temperature
range.
.
NSF-H1 LISTED
AGEING AND OXIDATION STABLE
EXCELLENT LUBRICATING EFFECT
VERY GOOD WATER RESISTANCE
HIGH THERMAL STABILITY
WIDE OPERATIVE TEMPERATURE RANGE
EXCELLENT CORROSION PROTECTION, MINIMUM FRICTION AND WEAR
F.L.G. GT.MULTI-TEMPERATURE GREASE.
Rolling bearings:• heavily loaded, slow up to medium-fast running rolling bearings at very high
temperatures, such as bearings in automatic baking ovens and drying kilns• bearings with high impulsive loads such as pellet presses• conveyor rolling bearings and guide pulley bearings in dryers and ovens
Plain bearings:• for plain bearings exposed to high temperatures
• For the lubrication of bolts, joints, disc cams and other sliding points• Low temperature grease for bearings and guidings• High performance grease for fast running roller and plain bearings of all kinds
The products do not attack common metals, plastics, lacquers as well as seals which are resistant to mineral oil. The products should not be mixed with other greases.
This text contains facts and statements and is determined with our best knowledge and will be checked continuously. These statements are depending - among other reasons - on experiences gained in the industry. We only pass them on without liability. Before using our products you should test the applicability and you should convince yourself about the satisfactory performance. Our application examples and suggestions should not request to violate patent rights.
FORM > pasty COLOUR > beige ODOUR > neutral
>FIELDS OF APPLICATION
>PRODUCT SPECIFICATIONS
>MATERIAL COMPATIBILITY
L U B R I C A N T S .
T E C H N O L O G Y .
P E O P L E .
> 400ml spray can (12 pcs.)
>AVAILABLE IN
400m
l
VALUE NORMNSF REG.-NO. 142364 -DENSITY AT +15 °C 0,95 G/ML DIN 51757VISCOSITY OF BASE OIL AT +40 °C 46 MM2/S DIN 51562-1TYPE OF THICKENER CALCIUM SULFONATE COMPLEX -DROPPING POINT > +250°C DIN ISO 2176WORKED PENETRATION 265 – 295 1/10 MM DIN ISO 2137NLGI GRADE 2 DIN 51818OPERATIVE TEMPERATURE RANGE -45 °C UP TO +170 °C -CLASSIFICATION DIN KP HC 2 P-40 DIN 51502CLASSIFICATION ISO L-XDEIB 2 ISO 6743-9WATER RESISTANCE AT 90 °C / 3 H 0 DIN 51807 T1 OIL SEPARATION AT +40 °C / 18 H < 0,5% DIN 51817S.R.V.-TEST T=+190°C,F=200N DIN 51834FRICTION COEFFICIENTΜ MIN. 0,08 -Μ MAX. 0,09 -WEAR RATEBALL 0,45MM -CORROSION PROTECTION TO STEEL 0 – 0 CORR.-GRADE DIN 51802CORROSION EFFECT ON COPPER 1 CORR.-GRADE DIN 51811
360oSPRAY PRESSURE