Flexpipe PDS FlexPipeHT English

download Flexpipe PDS FlexPipeHT English

of 2

Transcript of Flexpipe PDS FlexPipeHT English

  • 8/13/2019 Flexpipe PDS FlexPipeHT English

    1/2

    Benefits of using FPLP HT Eliminates the need for cooling systems.

    Eliminates corrosion.

    Decreases installation time and cost.

    Increases onsite safety with smaller crews and logistics.

    Reduces the amount of environmental disruption.

    Increases joint reliability with Flexpipe-designedinstallation equipment that controls pressure to ensurethe same robust tting connection every time.

    Performance HighlightsThe FPLP HT patented unbonded ber design offers:

    Suitability for temperature excursions for up to500 hours at 93C (200F) over the life of the product.

    The most exible high pressure composite linepipe.

    High impact resistance during installation.

    No axial elongation when pressurized.

    Suitability for up to 25% aromatic and cycloalkanecontent (by volume).

    Temperature:Maximum continuous operating temperature:180F (82C)

    Sizes:2, 3 and 4 inch ID sizes

    Pressure:Maximum operating pressure: 1500 psi

    Length:1,970 to 3,773 feet or 600 to 1,150 meters per reel

    Design:HDPE-RT liner and jacket reinforced with woundberglass in Flexpipe Systems patented dry berdesign

    THE NEXT STEP IN HIGH TEMPEATURE PIPELINE RELIABILITY

    FlexPipe LinepipeHigh Temperature

    WOUND DRY FIBERGLASS

    HDPE-RT LINER

    HDPE-RT JACKET

    FlexPipe Linepipe High Temperature(FPLP HT)

  • 8/13/2019 Flexpipe PDS FlexPipeHT English

    2/2

    Project Snapshots1 An Australian based energy producer chose FPLPHT as their high temperature, corrosion resistant pipeline

    solution: 17,720 ft (5400 m) of 3 FPLP HT installed by plowing.

    Maximum operating temperature: 176F (80C)

    The client was extremely pleased with how quickly thepipeline was installed and with the narrow right-of-way(ROW) cleared for the installation process and wasquoted as saying that they had never seen such a cleaninstall.

    The client experienced issues with its previous pipelineoptions; berglass lines were susceptible to bruising andsteel coating often chipped during installation. FPLP HToffered a corrosion resistant and robust solution increasing

    the reliability and lifespan of the pipeline system.

    FP301 HT FP601 HT

    Maximum Operating Pressure @ 82C or 180F 5,171 kPa / 750 pi 10,342 kPa / 1,500 psi

    Nominal Size 2 3 4 2 3 4

    Metric (mm) 69 97 124 73 101 130 Imperial (inches) 2.73 3.80 4.89 2.86 3.96 5.11

    Metric (mm) 54 77 99 54 77 99 Imperial (inches) 2.12 3.02 3.90 2.12 3.02 3.90

    Metric (kg/m) 1.7 3.0 4.9 2.5 4.3 6.9 Imperial (lbs/ft) 1.1 2.0 3.3 1.7 2.9 4.6

    Metric (m) 1.2 1.8 2.1 1.2 1.8 2.1 Imperial (ft) 4 6 7 4 6 7

    Metric (m) 1150 800 785 1150 730 600 Imperial (ft) 3773 2625 2575 3773 2395 1970

    Metric (m) 3.7 3.7 3.7 3.7 3.7 3.7 Imperial (ft) 12 12 12 12 12 12

    Metric (kg) 2635 3100 5000 3450 3820 5273 Imperial (lbs) 5800 6800 11000 7600 8400 11601

    Outside Diameter

    Inside Diameter

    Weight

    Min. Bend Radius (operational)

    Length / Reel*

    Reel Diameter

    Reel Weight Full

    2 A major oil and gas producer active in the RockyMountains chose FPLP HT for oil and gas gathering lines in

    the Uinta Basin: 5400 ft (1645 m) of 2 and 4 FPLP HT installed.

    Maximum operating temperature: 160F (71C) at thewellhead.

    Eliminated the requirement for cooling systems savingthe client up to $10,000 per well.

    The three 1800 foot lines were installed in less than4 hours despite the wet, spring conditions.

    Ease of installation, Flexpipe Systems proven track recordand total installed cost savings were a few of the reasonsthe client chose FPLP HT as their composite pipelinesolution.

    Lengths and reel weights are approximate as they may vary depending on the manufacturing run.

    Product data is subject to change without notice. Flexpipe Systems products are patented by US Patents 6,889,716, 6,902,205, 7,946,629 B2 and 8,042,252 B2 by Canada Patent2,513,506, 2,513,468 and 2,562,823 and by European Patent 1592908. Additional patents are pending. ShawCor Ltd., 2013

    Modernizing PipelinesFlexpipe Systems is the market leader in providing exible, composite pipeline solutions to the energy sector. FlexpipeSystems collection of products provide solutions to projects where a corrosion resistant, high pressure pipeline is benecial,while driving down costs and increasing productivity. Over 55 million feet of Flexpipe Systems patented technology and80,000 ttings have been successfully installed throughout North America, Latin America and Australia. Flexpipe Systemsteam of technical experts, engineers, and eld personnel will nd the right solution for your next pipeline project.

    flexpipesystems.com

    http://www.flexpipesystems.com/http://www.flexpipesystems.com/