FLEXIBLE CONDUITS - Kompress · conduit types & application guide flexible pliable high mechanical...
-
Upload
vuongquynh -
Category
Documents
-
view
220 -
download
1
Transcript of FLEXIBLE CONDUITS - Kompress · conduit types & application guide flexible pliable high mechanical...
Kompress Flexible Conduits are a fully comprehensive range of both metallic and non-metallic
flexible tubing and associated accessories.
The products cover all known requirements of the industrial electrical market place and are supplied
in accordance with our ISO 9002 accreditation.
A range of strip wound conduits, with or without cover, including braided types and liquid tight coverings,
together with fittings to complement and provide sealing up to IP 67.
A pliable system of corrugated leaded steel is also available.
A range of conduits manufactured from PVC, Polypropylene or Nylon with annular corrugations;
also a spiral wound, extremely flexible PVC system.
Kompress leads the market in the provision of convenient conduit Contractor Packs. These come complete
with fittings in a wide range of systems and are packaged in sturdy carry boxes.
The range of Kompress conduit accessories is part of an ongoing development programme which already
includes adaptors, thread convertors, locknuts and splices.
Most types of conduit both metallic & non-metallic can be offered cut to any required length. Various fittings
can also be pre-assembled.
The Kompress part numbering system has been carefully devised to help the specifier understand
and recognise each element of the code. This simple part numbering system
makes specifying easy without constant reference to the catalogue.
This is how the part number is created:-
=
KGC (Kompress Galvanised Conduit) 20 (nominal O/D of conduit in mm)
30 (length of coil in m)
=
KFF (Kompress Fixed Fitting) 20 (nominal O/D of conduit in mm)
M20 (metric thread of fitting)
FLEXIBLE CONDUITS
METALLIC CONDUITS
NON-METALLIC CONDUITS
CONTRACTOR PACKS
ACCESSORIES
HOW TO SPECIFY
eg KGC 20 - 30
eg KFF20M20
CUT LENGTHS
FLEXIBLE CONDUITS
26
CONDUIT TYPES & APPLICATION GUIDE
FLEXIBLE PLIABLEHIGH
MECHANICALSTRENGTH
LOW FIRE
HAZARD
HALOGENFREE
SELF EXTIN-GUISHING
HIGHFATIGUELEVEL
HIGHABRASIVERESISTANCE
HIGH U.V.
RESISTANCE
0 1 2 653 4
1 32 870 5 64
CONDUITSPROPERTIES
I.P. RATING
TEMPERATURE
RANGE ºC
1st DIGIT (ie.IP50)
2nd DIGIT (ie.IP50)
KFC GALVANISED STEEL, PVC COVERED
KCC PVC CORRUGATED
KPPC POLYPROPYLENE CORRUGATED
KNHC NYLON CORRUGATED
KVSC PVC, SPIRAL REINFORCED
CONTRACTORPACKS
KGC GALVANISED STEEL -50 to +300
-30 to +120
IP40
IP54
IP54
IP54
IP65
IP65
-5 to +70
-20 to +90
-40 to +120
-5 to +70
I.P GUIDE
CERT No.891292
Non-protected.No special protection
Protected againstsolid objects greaterthan 50mm.A large surface of the body such asa hand (but no protection againstdeliberate access). Solid objectexceeding 50 mm in diameter.
Protected againstsolid objects greaterthan 12mm.Fingers or similar objects notexceeding 80mm in length.Solid objects exceeding 12mmin diameter.
Protected againstsolid objects greaterthan 2.5mm.Tools, wires, etc. of diameter orthickness greater than 2.5mm.Solid objects exceeding 2.5mmin diameter.
Protected againstsolid objects greaterthan 1.0mm.Wires or strips of thicknessgreater than 1.0mm. Solidobjects exceeding 1.0mm indiameter.
Dust-protected.Ingress of dust is not totallyprotected but dust does notenter in sufficient quantity tointerfere with satisfactoryoperation of the equipment.
Dust tight.No ingress of dust .
Non-protected.No special protection
Protected againstdripping water.Dripping water. Vertically fallingdrops shall have no harmfuleffect.
Protected againstdripping water whentilted up to 15º.Vertically dripping water shallhave no harmful effect whenthe enclosure is tilted at anyangle up to 15º from its normalposition.
Protected againstspraying water.Water falling as a spray at anangle up to 60º from thevertical shall have no harmfuleffect.
Protected againstsplashing water.Water splashed against theenclosure from any directionshall have no harmful effect.
Protected againstwater jets.Water projected by a nozzleaginst the enclosure from anydirection shall have no harmfuleffect.
Protected againstheavy seas.Water from heavy seas or waterprojected in powerful jets shallnot enter the enclosure inharmful quantities .
Protected againstthe effects ofimmersion.Ingress of water in a harmfulquantity shall not be possiblewhen the enclosure is immersedin water under definedconditions of pressure and time.
Protected againstsubmersion.The equipment is suitable forcontinuous submersion in waterunder conditions which shall bespecified by the manufacturer.Note: Normally this will mean thatthe equipment is hermeticallysealed. However with certaintypes of equipment it can meanthat water can enter but only insuch a manner that it produces noharmful effects.
KPPZHC POLYPROPYLENE ZERO HALOGEN CORRUGATED
IP54-20 to +90
Refer to individual conduit types for properties
27
FLEXIBLE CONDUITS
MINIMUM REELED PART OUTSIDE INSIDE INSIDE BEND LENGTH NO. DIA. DIA. RADIUS (m)
KGC 10-30 9 7 25 30KGC 12-30 13 10 30 30KGC 16-30 16 13 35 30KGC 20-10 20 17 40 10KGC 20-30 20 17 40 30KGC 20-50 20 17 40 50KGC 25-10 25 21 50 10KGC 25-30 25 21 50 30KGC 25-50 25 21 50 50KGC 32-10 32 28 60 10KGC 40-10 42 38 80 10KGC 50-10 53 48 90 10
FITTINGS FOR KGC CONDUIT
PART NO.
ISO PG - KFF10 PG7 - KFF12 PG9 KFF16 M16 KFF16 PG11 KFF16 M20 KFF20 PG13.5 KFF20 M20 KFF20 P16 KFF25 M25 KFF25 PG21 KFF32 M32 KFF32 PG29 KFF40 M40 KFF40 PG36 KFF50 M50 KFF50 PG42
PART NO. ISO PG - KFSW10 PG7 - KFSW12 PG9 KFSW16 M16 KFSW16 PG11 KFSW16 M20 KFSW20 PG13.5 KFSW20 M20 KFSW20 P16 KFSW25 M25 KFSW25 PG21 KFSW32 M32 KFSW32 PG29 KFSW40 M40 KFSW40 PG36 KFSW50 M50 KFSW50 PG42
PART NO. HOLE DIA. 10 KFB 10 12 KFB 12 16 KFB 16 20 KFB 20 25 KFB 25 32 KFB 32 40 KFB 40 50 KFB 50
TYPE KGCCONSTRUCTION
ELECTRO-GALVANISED STEEL CONDUIT.
RATINGIP 40
TEMPERATURE-50ºC to +300ºC
COLOURSELF COLOUR
TYPE KGC
TYPE KFFFIXED FITTING
TYPE KFSWSWIVEL FITTING
TYPE KFBBOX FITTING
GALVANISED STEEL CONDUIT
FLEXIBLE CONDUITS
28
MINIMUM REELED PART OUTSIDE INSIDE INSIDE BEND LENGTH NO. DIA. DIA. RADIUS (m)
KFC 10-30 10 7 25 30KFC 12-30 14 10 30 30KFC 16-10 17 13 35 10KFC 16-30 17 13 35 30KFC 20-10 21 17 40 10KFC 20-30 21 17 40 30KFC 20-50 21 17 40 50KFC 25-10 26 21 50 10KFC 25-30 26 21 50 30KFC 25-50 26 21 50 50KFC 32-10 34 28 60 10KFC 32-30 34 28 60 30KFC 40-10 44 38 80 10KFC 50-10 55 48 90 10
FITTINGS FOR KFC CONDUIT
PART NO.
ISO PG - KFF10 PG7 - KFF12 PG9 KFF16 M16 KFF16 PG11 KFF16 M20 KFF20 PG13.5 KFF20 M20 KFF20 PG16 KFF25 M25 KFF25 PG21 KFF32 M32 KFF32 PG29 KFF40 M40 KFF40 PG36 KFF50 M50 KFF50 PG42
PART NO.
ISO PG - KFSW10 PG7 - KFSW12 PG9 KFSW16 M16 KFSW16 PG11 KFSW16 M20 KFSW20 PG13.5 - KFSW16 PG11 KFSW20 M20 KFSW20 PG16 KFSW25 M25 KFSW25 PG21 KFSW32 M32 KFSW32 PG29 KFSW40 M40 KFSW40 PG36 KFSW50 M50 KFSW50 PG42
PART NO.
HOLE DIA. 10 KFB 10 12 KFB 12 16 KFB 16 20 KFB 20 25 KFB 25 32 KFB 32 40 KFB 40 50 KFB 50
TYPE KFCCONSTRUCTION
ELECTRO-GALVANISED STEEL CONDUIT. THERMOPLASTIC COVER.
OIL AND CHEMICAL RESISTANT
RATINGIP 54
TEMPERATURE-30ºC to +120ºC
COLOURSTANDARD BLACK
TYPE KFC
TYPE KFFFIXED FITTINGS
TYPE KFSWSWIVEL FITTINGS
TYPE KFBBOX FITTINGS
STEEL FLEXIBLE CONDUIT
29
FLEXIBLE CONDUITS
TYPE KCCCONSTRUCTION
PVC CORRUGATED CONDUIT
RATINGIP 54
TEMPERATURE-5ºC to +70ºC
COLOURBLACK AND WHITE (OTHERS ON REQUEST)
PVC CORRUGATED CONDUIT
MINIMUM REELED PART OUTSIDE INSIDE INSIDE BEND LENGTH NO. DIA. DIA. RADIUS (m)
KCC 16-100 Black 16 11 24 100KCC 20-100 Black 20 14 32 100 KCC 25-50 Black 25 18 40 50 KCC 32-25 Black 32 24 56 25 KCC 40-25 Black 40 31 64 25 KCC 50-25 Black 50 40 100 25
TYPE KCCFITTINGS FOR KCC CONDUIT
PART NO. ISO PG KNCF16 M16 Black KNCF16 PG11 BlackKNCF20 M20 Black KNCF20 PG13.5 Black - KNCF20 PG16 BlackKNCF25 M25 Black KNCF25 PG21 BlackKNCF32 M32 Black KNCF32 PG29 BlackKNCF40 M40 Black KNCF40 PG36 BlackKNCF50 M50 Black KNCF50 PG42 Black
PART NO. ISO PG KNCF16 M16-90 Black KNCF16 PG11-90 BlackKNCF20 M20-90 Black KNCF20 PG13.5-90 Black - KNCF20 PG16-90 BlackKNCF25 M25-90 Black KNCF25 PG21-90 BlackKNCF32 M32-90 Black KNCF32 PG29-90 BlackKNCF40 M40-90 Black -KNCF50 M50-90 Black -
TYPE KNCFSTRAIGHT FITTING
TYPE KNCF90º FITTING
PVC CORRUGATED CONDUIT
MINIMUM REELED PART OUTSIDE INSIDE INSIDE BEND LENGTH NO. DIA. DIA. RADIUS (m)
KCC 16-100 White 16 11 24 100KCC 20-100 White 20 14 32 100 KCC 25-50 White 25 18 40 50 KCC 32-25 White 32 24 56 25 KCC 40-25 White 40 31 64 25 KCC 50-25 White 50 40 100 25
TYPE KCCFITTINGS FOR KCC CONDUIT
PART NO. ISO PG KNCF16 M16 White KNCF16 PG11 White KNCF20 M20 White KNCF20 PG13.5 White - KNCF20 PG16 White KNCF25 M25 White KNCF25 PG21 White KNCF32 M32 White KNCF32 PG29 White KNCF40 M40 White - KNCF50 M50 White -
PART NO. ISO PG KNCF16 M16-90 White KNCF16 PG11-90 WhiteKNCF20 M20-90 White KNCF20 PG13.5-90 White - KNCF20 PG16-90 WhiteKNCF25 M25-90 White KNCF25 PG21-90 WhiteKNCF32 M32-90 White KNCF32 PG29-90 WhiteKNCF40 M40-90 White -KNCF50 M50-90 White -
TYPE KNCF90º FITTING
TYPE KNCFSTRAIGHT FITTING
FLEXIBLE CONDUITS
30
POLYPROPYLENE CORRUGATED CONDUIT
MINIMUM REELED PART OUTSIDE INSIDE INSIDE BEND LENGTH NO. DIA. DIA. RADIUS (m)
KPPC 16-100 Grey 16 11 24 100KPPC 20-100 Grey 20 14 32 100 KPPC 25-50 Grey 25 18 40 50 KPPC 32-25 Grey 32 24 56 25 KPPC 40-25 Grey 40 31 64 25 KPPC 50-25 Grey 50 40 100 25
TYPE KPPCCONSTRUCTION
POLYPROPYLENE CORRUGATED CONDUIT
RATING IP 54 TEMPERATURE -20ºC to +90ºC COLOUR GREY
TYPE KPPCFITTINGS FOR KPPC CONDUIT
PART NO. ISO PG KNCF16 M16 Grey KNCF16 PG11 GreyKNCF20 M20 Grey KNCF20 PG13.5 Grey - KNCF20 PG16 GreyKNCF25 M25 Grey KNCF25 PG21 GreyKNCF32 M32 Grey KNCF32 PG29 GreyKNCF40 M40 Grey KNCF40 PG36 GreyKNCF50 M50 Grey KNCF50 PG42 Grey
PART NO. ISO PG KNCF16 M16-90 Grey KNCF16 PG11-90 GreyKNCF20 M20-90 Grey KNCF20 PG13.5-90 Grey - KNCF20 PG16-90 GreyKNCF25 M25-90 Grey KNCF25 PG21-90 GreyKNCF32 M32-90 Grey KNCF32 PG29-90 GreyKNCF40 M40-90 Grey -KNCF50 M50-90 Grey -
TYPE KNCFSTRAIGHT FITTING
TYPE KNCF90º FITTING
POLYPROPYLENE CORRUGATED ZERO HALOGEN CONDUIT
MINIMUM REELED PART OUTSIDE INSIDE INSIDE BEND LENGTH NO. DIA. DIA. RADIUS (m)
KPPZHC 16-100 Black 16 11 24 100KPPZHC 20-100 Black 20 14 32 100 KPPZHC 25-50 Black 25 18 40 50 KPPZHC 32-25 Black 32 24 56 25 KPPZHC 40-25 Black 40 31 64 25 KPPZHC 50-25 Black 50 40 100 25
TYPE KPPZHC
FITTINGS FOR KPPZHC CONDUIT
PART NO. ISO PG KNCF16 M16 Black KNCF16 PG11 Black KNCF20 M20 Black KNCF20 PG13.5 Black - KNCF20 PG16 Black KNCF25 M25 Black KNCF25 PG21 Black KNCF32 M32 Black KNCF32 PG29 Black KNCF40 M40 Black KNCF40 PG36 Black KNCF50 M50 Black KNCF50 PG42 Black
PART NO. ISO PG KNCF16 M16-90 Black KNCF16 PG11-90 BlackKNCF20 M20-90 Black KNCF20 PG13.5-90 Black - KNCF20 PG16-90 BlackKNCF25 M25-90 Black KNCF25 PG21-90 BlackKNCF32 M32-90 Black KNCF32 PG29-90 BlackKNCF40 M40-90 Black -KNCF50 M50-90 Black -
TYPE KPPZHCCONSTRUCTION
ZERO HALOGEN POLYPROPYLENE CORRUGATED CONDUIT
RATING IP 54 TEMPERATURE -20ºC to +90ºC COLOUR BLACK
TYPE KNCFSTRAIGHT FITTING
TYPE KNCF90º FITTING
31
FLEXIBLE CONDUITS
NYLON CORRUGATED CONDUIT
MINIMUM REELED PART OUTSIDE INSIDE INSIDE BEND LENGTH NO. DIA. DIA. RADIUS (m)
KNHC 12-50 12 9.5 20 50KNHC 16-50 16 9.5 20 50 KNHC 20-50 20 14.0 32 50 KNHC 25-50 25 18.0 40 50 KNHC 32-25 32 24.0 56 25 KNHC 40-25 50 31.0 64 25KNHC 50-25 50 40.0 100 25
TYPE KNHCCONSTRUCTION
NYLON CORRUGATED CONDUIT
RATINGIP 65
TEMPERATURE-40ºC to +120ºC
COLOURBLACK
TYPE KNHC
FITTINGS FOR KNHC CONDUIT
PART NO.
ISO PG KNHF12 M16 KNHF12 PG9 KNHF16 M16 KNHF16 PG11 KNHF20 M20 KNHF20 PG16 - - KNHF25 M25 KNHF25 PG21 KNHF32 M32 KNHF32 PG29 KNHF40 M40 KNHF40 PG36 KNHF50 M50 KNHF50 PG42
PART NO.
ISO PG KNHF12 M16-90 KNHF12 PG9-90 KNHF16 M16-90 KNHF16 PG11-90 KNHF20 M20-90 KNHF20 PG16-90 - - KNHF25 M25-90 KNHF25 PG21-90 KNHF32 M32-90 KNHF32 PG29-90 KNHF40 M40-90 KNHF40 PG36-90 KNHF50 M50-90 KNHF50 PG42-90
TYPE KNHFSTRAIGHT FITTING
TYPE KNHF90º FITTING
FLEXIBLE CONDUITS
32
PVC SPIRAL CONDUIT
MINIMUM REELED PART OUTSIDE INSIDE INSIDE BEND LENGTH NO. DIA. DIA. RADIUS (m)
KVSC 10-30 12 8 16 30KVSC 12-30 15 10 20 30 KVSC 16-30 16 12 24 30 KVSC 20-30 21 16 32 30 KVSC 25-30 25 20 40 30 KVSC 32-30 31 25 56 30 KVSC 40-30 38 32 64 30 KVSC 50-30 46 40 100 30
TYPE KVSCCONSTRUCTION
PVC SPIRAL SMOOTH BORE CONDUIT
RATINGIP 65
TEMPERATURE-5ºC to +70ºC
COLOURBLACK
TYPE KVSC
FITTINGS FOR KVSC CONDUIT
PART NO.
ISO PG - KVSF10 PG7 - KVSF12 PG9 KVSF16 M16 KVSF16 PG11 KVSF20 M20 KVSF20 PG13.5 - KVSF20 PG16 KVSF25 M25 KVSF25 PG21 KVSF32 M32 KVSF32 PG29 KVSF40 M40 KVSF40 PG36 KVSF50 M50 KVSF50 PG42
TYPE KVSFSWIVEL FITTING
33
FLEXIBLE CONDUITS
CONDUITS
PART SIZE NO.
16 KFC 16 CP 20 KFC 20 CP 25 KFC 25 CP
PART SIZE NO.
16 KCC 16 CP 20 KCC 20 CP 25 KCC 25 CP
CONTRACTOR PACKCONTAINS
10M CONDUIT
10 FITTINGS
10 LOCK NUTS
KFC GALVANISED STEEL PVC COVERED
KCC PVC CORRUGATED
CONDUITS
PART SIZE NO.
16 KPPC 16 CP 20 KPPC 20 CP 25 KPPC 25 CP
PART SIZE NO.
16 KVSC 16 CP 20 KVSC 20 CP 25 KVSC 25 CP
KPPC POLYPROPYLENECORRUGATED
KVSC SPIRAL PVCREINFORCED
* Contains 5m conduit, 5 fittings, 5 locknuts
BLACK BLACK
BLACKGREY
FLEXIBLE CONDUITS
34