FLAIL MOWERS / SHREDDERS - Rankin Equipment · forged hammer knives designed to mow grass and shred...

Innovative, Rugged & Labor Saving Attachments

FLAIL MOWERS / SHREDDERS

w w w . r a n k i n e q c o . c o m

SEVERE DUTY FLAIL MOWERS / SHREDDERS

MODELS WORKINGWIDTH

OVERALLWIDTH

HP REQ’D HITCH FLAILS HOUSING

THICKNESSROTOR DIA.

LESS BLADESNO. OFBELTS WEIGHT

S9C-175 69" 75" 50-60 Cat. 2 Hyd Offset 18 Hammers 1/4" double wall 6-1/4" x 5/8" Wall 5 1795S9C-200 79" 85" 55-65 Cat. 2 Hyd Offset 21 Hammers 1/4" double wall 6-1/4" x 5/8" Wall 5 1925S9C-225 89" 95" 65-75 Cat. 2 Hyd Offset 21 Hammers 1/4" double wall 6-1/4" x 5/8" Wall 5 2055

S9C-300 118" 124" 90-100 Cat. 2 Hyd Offset 30 Hammers 1/4" double wall 6-1/4" x 5/8" Wall 5 2670

� Close coupled for tractor stability � Adjustable rear hatch � High tensile steel hood � Rotor bearings are double self aligning � Safety Protection: Front Double Row Chains

and Rear Rubber Flap

S9C SERIES Flail Mowers/Shredders are designed for severe conditions and are ideal for mulching prunings and mowing heavy grass. Available in 69", 79", 89", & 118" cutting widths. The 2000 RPM rotor is equipped with 3 lb. drop forged hammer knives designed to mow grass and shred brush up to 4" diameter. An adjustable rear hatch in open position discharges grass and allows tractor speeds up to 6 MPH, and in closed position contains and further shreds brush to a finer mulch. The hydraulic sideshift hitch allows quick setting from center mount to offset and is close coupled to the tractor for stability. Equipped with chain guards in front and rubber shielding on rear for safety protec-tion. The "low profile" belt housing and gearbox is a great advantage when operating in orchards and vineyards.

FEATURES: � Low profile belt housing and gearbox � Three rows forged bolt-on re-cutter bars � Bolt-on hardox internal wearplate � 150 HP gearbox with built in over-running clutch � 5 belt drive, rated for 4" material � Hydraulic linear sideshift - provides up to 22" offset

S9C SERIES

VARIABLE OFFSET HITCH l 60-100 HP

Hammer Knife


MODELS WORKINGWIDTH

OVERALLWIDTH


THICKNESSROTOR DIA.

LESS BLADES

ROLLERDIA.

NO. OFBELTS WEIGHT

SMO-175 69" 78" 40 Cat. 1 & 2Variable Offset 18 Hammers 5MM Dbl. Skin

Front & Rear 5-1/2" 5-1/4" 4 1210

SMO-200 79" 88" 45 Cat. 1 CenterVariable Offset 21 Hammers 5MM Dbl. Skin

Front & Rear 5-1/2" 5-1/4" 4 1368

SMO-225 89" 99" 50 Cat. 1 CenterVariable Offset 21 Hammers 5MM Dbl. Skin

Front & Rear 6-1/2" 6" 5 1521

SMO-250 98" 105" 55 Cat. 1 & 2Variable Offset 24 Hammers 5MM Dbl. Skin

Front & Rear 6-1/2" 6" 5 1697

� Variable Offset Series - provides up to 24" offset

� Variable rear mount

� Cat. 1 & 2, 3-point hitch

� Shreds brush & prunings up to 3"

� Drop forged hammer knives and cutter bars

� 85HP gearbox with built-in overrunning clutch

MODELS WORKINGWIDTH

OVERALLWIDTH


THICKNESSROTOR DIA.

LESS BLADESROLLER

DIAMETERNO. OF

BELTSWEIGHT

SMWA-REV-135 53" 61" 24 Cat. 1 Center& 7" Offset 12 4MM

Dbl. Skin 5" 5-1/4" 3 765


Dbl. Skin 5" 5-1/4" 3 835


Dbl. Skin 5" 5-1/4" 3 935


Dbl. Skin 5" 5-1/4" 3 1070

SMO SERIES

VARIABLE OFFSET HITCH l Up to 85 HP

FEATURES:

Hammer Knife

Ideal for vineyards, orchards, parks, pastures, rental yards and heavy cover crop applications.

Rear hatch is slotted to accept optional rake teeth for applications that require additional pick up of material.

� Reversible Cat. 1, 3-point hitch

� Shredders are center mount or offset 6" to the right

� Shreds brush and prunings up to 2"

� Drop forged hammer knives and cutter bars

� 72 HP gearbox with built-in overrunning clutch

Ideal for vineyards, roadsides, parks, pastures, rental yards and heavy cover crop applications.


Hammer Knife

SMWA SERIES - REVERSIBLEFEATURES:

FIXED OR OFFSET HITCH l Up to 72 HP

Phone (800) 426-2009 / (509) 453-8271 l Fax: (509) 457-2456

w w w . r a n k i n e q c o . c o mE Q U I P M E N T C O

MODELS WORKINGWIDTH

OVERALLWIDTH


THICKNESSROTOR DIA.

LESS BLADESROLLER

DIA.NO. OFBELTS WEIGHT

SLE-120 48” 54” 20 Cat.1 Center & 9” Offset 24 pr. Y Blades 4MM 4-1/2" 5-1/2" 3 415SLE-160 63” 69” 28 Cat.1 Center & 9” Offset 30 pr. Y Blades 4MM 4-1/2" 5-1/2" 3 525SLE-190 75" 81" 35 Cat.1 Center & 9” Offset 36 pr. Y Blades 4MM 4-1/2" 5-1/2" 3 620


� Cat. 1 Quick Hitch Compatible � Two Position Center or Offset Hitch � Dual Parking Stands � Inner Housing Mounted Cutterbar � Side Slice or Finish Mowing Cup Blades � Safety Protection Front and Rear � Automatic Belt Tensioning System � Suitable for Tractors 20-40 HP

Designed to achieve fine shredding on cover crops, parks, schools, pastures, and light weed abatement.

MODELS WORKINGWIDTH

OVERALLWIDTH

MAXIMUM OFFSET*

NO. OFHAMMERS

NO. OF Y BLADES

H.P.REQ'D

RAKE SLOTS WEIGHT

SFG-95 38" 43" - 8 32 20 6 620SFG-125 49" 55" - 8 32 25 8 730SFG-140 55" 61" - 10 40 30 9 770SFG-155 61" 67" - 10 40 35 10 840SFG-185* 73" 78" 44" 12 48 40 12 1005SFG-200* 79" 84" 48" 14 56 45 13 1100*These shredders come with manual offset, hydraulic offset is optional. Offset shown is the maximum offset from centerline of tractor to the right

� Cat. 1 ASAE quick hitch, 540 RPM tractors � Fixed center mount hitch, except SFG185-200 � 70 HP gearbox with built-in overrunning clutch � Low profile belt housing, 23" high for clearance � Hammer knives shreds brush and prunings up to

2" diameter � Double Y blades mow weeds and light brush up

to 1" diameterSFG Series flail mowers feature fixed center mount, manual or hydraulic side shift. The narrow shredders are fixed center mount. The two largest shredders are manual offset, return to center with optional hydraulic offset.

SFG SERIES

Hammer Knife Double Y Blade

FEATURES:

SLE SERIES FEATURES:




Quick Change Y Blade Quick Change

Ducksfoot Blade

FLAIL MOWERS / SHREDDERS - Rankin Equipment · forged hammer knives designed to mow grass and shred...

Documents

Transcript of FLAIL MOWERS / SHREDDERS - Rankin Equipment · forged hammer knives designed to mow grass and shred...