FIXED HEIGHT STEEL GANTRY CRANESMODEL

NUMBERCAPACITY(POUNDS)

OVERALL BEAM LENGTH / HEIGHT

UNDER I-BEAMTO GROUND

BASEWIDTH

FLANGEWIDTH

NET WT.(POUNDS)

LIST PRICEEACH

FHS-50 500 8' / 4" 5'9" 48" 2.66" 530 $861.00FHS-2-10 2,000 10' / 6" 10' 60" 3" 655 $855.00FHS-2-15 2,000 15' / 6" 10' 60" 3.33" 710 954.00FHS-2-20 2,000 20' / 8" 10' 60" 4" 890 1,200.00FHS-4-10 4,000 10' / 8" 10' 60" 4" 815 $995.00FHS-4-15 4,000 15' / 8" 10' 60" 4" 903 1,136.00FHS-4-20 4,000 20' / 10" 10' 60" 4.66" 1142 1,672.00

DC-20/FC-70

ADJUSTABLE HEIGHT STEEL GANTRY CRANESMODEL

NUMBERCAPACITY(POUNDS)

OVERALL BEAM LENGTH / HEIGHT

UNDER I-BEAM USABLE HEIGHT

BASEWIDTH

FLANGEWIDTH

NET WT.(POUNDS)

LIST PRICEEACH

AHS-2-10-12 2,000 10' / 6" 7'6" to 12' 78" 3" 890 $1,643.00AHS-2-10-14 2,000 10' / 6" 8'6" to 14' 90" 3" 996 1,813.00AHS-2-10-16 2,000 10' / 6" 9'6" to 16' 102" 3" 1110 2,186.00AHS-2-15-12 2,000 15' / 6" 7'6" to 12' 78" 3.33" 978 1,806.00AHS-2-15-14 2,000 15' / 6" 8'6" to 14' 90" 3.33" 1084 1,931.00AHS-2-15-16 2,000 15' / 6" 9'6" to 16' 102" 3.33" 1199 2,304.00AHS-2-20-12 2,000 20' / 8" 7'6" to 12' 78" 4" 1066 1,913.00AHS-2-20-14 2,000 20' / 8" 8'6" to 14' 90" 4" 1172 2,085.00AHS-2-20-16 2,000 20' / 8" 9'6" to 16' 102" 4" 2452 2,459.00AHS-4-10-12 4,000 10' / 8" 7'6" to 12' 78" 4" 967 $1,759.00AHS-4-10-14 4,000 10' / 8" 8'6" to 14' 90" 4" 1071 1,906.00AHS-4-10-16 4,000 10' / 8" 9'6" to 16' 102" 4" 1175 2,279.00AHS-4-15-12 4,000 15' / 8" 7'6" to 12' 78" 4" 1059 1,927.00AHS-4-15-14 4,000 15' / 8" 8'6" to 14' 90" 4" 1264 2,249.00AHS-4-15-16 4,000 15' / 8" 9'6" to 16' 102" 4" 1398 2,622.00AHS-4-20-12 4,000 20' / 10" 7'6" to 12' 78" 4.66" 1291 2,381.00AHS-4-20-14 4,000 20' / 10" 8'6" to 14' 90" 4.66" 1395 2,539.00AHS-4-20-16 4,000 20' / 10" 9'6" to 16' 102" 4.66" 1501 2912.00AHS-6-10-12 6,000 10' / 8" 7'7" to 12'1" 78" 4" 998 $1,815.00AHS-6-10-14 6,000 10' / 8" 8'6" to 14' 90" 4" 1101 1,960.00AHS-6-10-16 6,000 10' / 8" 9'6" to 16' 102" 4" 1208 2,399.00AHS-6-15-12 6,000 15' / 10" 7'7" to 12'1" 78" 4.66" 1195 2,126.00AHS-6-15-14 6,000 15' / 10" 8'6" to 14' 90" 4.66" 1298 2,311.00AHS-6-15-16 6,000 15' / 10" 9'6" to 16' 102" 4.66" 1406 2,750.00AHS-6-20-12 6,000 20' / 10" 7'7" to 12'1" 78" 4.66" 1322 2,358.00AHS-6-20-14 6,000 20' / 10" 8'6" to 14' 90" 4.66" 1425 2,545.00AHS-6-20-16 6,000 20' / 10" 9'6" to 16' 102" 4.66" 1538 2,985.00AHS-8-10-12 8,000 10' / 10" 7'7" to 12'1" 78" 4.66" 1103 $2,008.00AHS-8-10-14 8,000 10' / 10" 8'6" to 14' 90" 4.66" 1206 2,147.00AHS-8-10-16 8,000 10' / 10" 9'6" to 16' 102" 4.66" 1319 2,637.00AHS-8-15-12 8,000 15' / 10" 7'7" to 12'1" 78" 4.66" 1230 2,208.00AHS-8-15-14 8,000 15' / 10" 8'6" to 14' 90" 4.66" 1333 2,393.00AHS-8-15-16 8,000 15' / 10" 9'6" to 16' 102" 4.66" 1456 2,882.00AHS-8-20-12 8,000 20' / 12" 7'7" to 12'1" 78" 5" 1485 2,743.00AHS-8-20-14 8,000 20' / 12" 8'6" to 14' 90" 5" 1588 2,914.00AHS-8-20-16 8,000 20' / 12" 9'6" to 16' 102" 5" 1699 3,403.00

USABLE DISTANCE BETWEEN UPRIGHTS IS OVERALL BEAM LENGTH MINUS 10½" DC-20/FC-70USABLE TROLLEY TRAVEL LENGTH IS OVERALL BEAM LENGTH MINUS 30"

GANTRY AND JIB CRANES87

Fixed and Adjustable Steel Gantry CranesIndustrial Steel Gantry Cranes are designed for transporting and positioning materials. Solid steel construction will provide years of service. Choose from a variety of sizes. Large 8" diameter 4 position locking swivel phenolic casters with roller bearings will facilitate easy mobility from one area to another. More economical and flexible than permanent cranes. Features quick setup design. Order optional Lever Ratchet for easy one-person height adjustment (not for fixed-height models). Height is adjustable in 6" increments on adjustable-height models. Blue finish. Hoist and trolley can be ordered separately, see pages 90-92.Note: All products should be inspected frequently to insure safe operation. Final testing and inspectionis left to end user after final assembly has been completed. For further details see ASME B30.17.

TOTAL LOCKING CASTERS

model AHS-2/4-TLC(FOR 2,000 AND 4,000 LB. CAPACITY CRANES ONLY)

model AHS-6/8-TLC(FOR 6,000 AND 8,000 LB. CAPACITY CRANES ONLY)

FIXED HEIGHT STEEL GANTRY CRANEseries FHS

ADJUSTABLE HEIGHTGANTRY CRANE • series AHS

V-GROOVE CASTERSmodel AHS-2/4-V(FOR 2,000 AND 4,000 LB. CAPACITY CRANES ONLY)

model AHS-6/8-V(FOR 6,000 AND 8,000 LB. CAPACITY CRANES ONLY)

STEEL GANTRY CRANE OPTIONSMODEL

NUMBER DESCRIPTIONLIST PRICE

EACHAHS-2/4-TLC TOTAL LOCKING CASTERS (FOR 2,000 & 4,000 LBS. CAPACITY CRANES ONLY) (SET OF 4) $128.00AHS-6/8-TLC TOTAL LOCKING CASTERS (FOR 6,000 LB. & 8,000 LBS. CAPACITY CRANES ONLY) (SET OF 4) 456.00AHS-2/4-V** 8" x 2" V-GROOVE CASTERS FOR 2,000 & 4,000 LBS. UNITS (SET OF 4) $207.00AHS-6/8-V** 8" x 3" V-GROOVE CASTERS FOR 6,000 & 8,000 LBS. UNITS (SET OF 4) 603.00AHS-KIT (2) COME-A-LONGS FOR HEIGHT ADJUSTMENT (NOT FOR LIFTING) $82.00

**4-POSITION V-GROOVE CASTERS AVAILABLE UPON REQUEST, CONTACT FACTORY DC-20

MODELNUMBER DESCRIPTION

LIST PRICEEACH

GPTD-2 2,000 TO 4,000 LBS. CAPACITY / STANDARD WITH 3 BUTTON HAND CONTROL $6,800.00GPTD-4 6,000 TO 8,000 LBS. CAPACITY / STANDARD WITH 3 BUTTON HAND CONTROL 8,100.00V-TRACK 10 FOOT SECTION OF V-GROOVE TRACK $106.00

ADDITIONAL BUTTONS ON HAND CONTROL FOR HOIST & TROLLEY AVAILABLE, CONTACT FACTORY DC-20

MODELNUMBER

CAPACITY(POUNDS)

OVERALL BEAM LENGTH / HEIGHT

UNDERI-BEAM RANGE

BASEWIDTH

FLANGEWIDTH

NET WT.(POUNDS)

LIST PRICEEACH

AHA-2-8-10* 2,000 8' / 6" 7'8" to 10'2" 54" 3.75" 280 $2,380.00AHA-2-8-12* 2,000 8' / 6" 9'6" to 12' 54" 3.75" 295 2,498.00

AHA-2-10-10* 2,000 10' / 6" 7'8" to 10'2" 54" 3.75" 294 $2,471.00AHA-2-10-12* 2,000 10' / 6" 9'6" to 12' 54" 3.75" 310 2,601.00

AHA-2-12-10 2,000 12' / 8" 7'8" to 10'2" 54" 4" 325 $2,904.00AHA-2-12-12 2,000 12' / 8" 9'6" to 12' 54" 4" 340 3,047.00

AHA-4-8-10 4,000 8' / 8" 7'8" to 10'2" 54" 4" 360 $3,271.00AHA-4-8-12 4,000 8' / 8" 9'6" to 12' 54" 4" 375 3,459.00

AHA-4-10-10 4,000 10' / 8" 7'8" to 10'2" 54" 4" 405 $3,819.00AHA-4-10-12 4,000 10' / 8" 9'6" to 12' 54" 4" 431 4,138.00

AHA-4-12-10 4,000 12' / 8" 7'8" to 10'2" 54" 4.125" 421 $4,048.00AHA-4-12-12 4,000 12' / 8" 9'6" to 12' 54" 4.125" 446 4,379.00

USABLE DISTANCE BETWEEN UPRIGHTS IS OVERALL BEAM LENGTH MINUS 14¼" DC-20/FC-70USABLE TROLLEY TRAVEL LENGTH IS OVERALL BEAM LENGTH MINUS 20" / 24"*

ALUMINUM GANTRY CRANE OPTIONSMODEL

NUMBER DESCRIPTIONLIST PRICE

EACHAHA-2/4-TLC TOTAL LOCKING CASTERS (FOR 2,000 & 4,000 LBS. CAPACITY CRANES ONLY) (SET OF 4) $128.00AHA-PNU FOUR-WAY LOCK 12" x 3½" PNEUMATIC CASTERS (1,500 LBS. CAPACITY) $250.00AHA-PNU-RF RETROFIT FOUR-WAY LOCK PNEUMATIC CASTERS (1,500 LBS. CAPACITY) 384.00AHA-2/4-V 8" x 2" V-GROOVE WHEELS (FOR 2,000 & 4,000 LBS. UNITS) (SET OF 4) $207.00AHA-2/4-V4 8" x 2" V-GROOVE WHEELS (FOR 2,000 & 4,000 LBS. UNITS) (W/4-POSITION LOCK) (SET OF 4) 265.00AHA-KIT (2) COME-A-LONG FOR HEIGHT ADJUSTMENT (NOT FOR LIFTING) $82.00AHA-FES-KIT FESTOON KIT, 115V AC POWER 113.00

GANT

RY A

ND J

IB C

RANE

S88

FESTOON SYSTEMmodel AHA-FES-KIT

Adjustable Height Aluminum Gantry CranesThe Adjustable Height Aluminum Gantry Crane combines lightweight and rigid construction into one unit. The all aluminum construction of this gantry crane makes it corrosion resistant and perfect for outdoor use. The lightweight I-beam allows height adjustment without the need of a hoist or fork truck. All pinned connections make it possible for two people to set up. Height is adjustable in 6" increments. Hoist and trolley can be ordered separately, see pages 90-92.Note: All products should be inspected frequently to insure safe operation. Final testing and inspection is left to end user after final assembly has been completed. For further details see ASME B30.17.

FESTOON SYSTEMmodel AHA-FES-KIT

PNEUMATIC CASTERSmodel AHA-PNU

"V" GROOVEmodel AHA-2/4-V

TOTAL LOCKINGmodel AHA-2/4-TLC

ADJUSTABLE HEIGHT

ADJUSTABLE SPAN

STANDARD 4-POSITION8" PHENOLIC SWIVEL

CASTER

Fixed and Adjustable Steel Gantry Crane Options

Steel Gantry Crane Power Traction Drive Options

MODELNUMBER

UNDER I-BEAMTO GROUND

I-BEAM(FLANGE x HEIGHT)

BASEWDITH

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

FPG-3 90" 2.66" x 4" 48" 300 288 $634.00FPG-6 90" 2.66" x 4" 48" 600 300 656.00FPG-10 90" 2.66" x 4" 48" 1,000 329 866.00FPG-20 90" 2.66" x 4" 48" 2,000 340 1,105.00

DC-20/FC-70

MODELNUMBER DESCRIPTION

NET WT.(POUNDS)

LIST PRICEEACH

FES-KIT KEEP POWER CORDS OUT OF DANGER 15 $108.00DC-20/FC-70

MODELNUMBER

UNDER I-BEAMTO GROUND

I-BEAM USABLE LENGTH

I-BEAM(FLANGE x HEIGHT)

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

CJIB-3 84" 54" 2.66" x 4" 300 204 $451.00CJIB-6 84" 54" 2.66" x 4" 600 216 477.00CJIB-10 78½" 54" 3.33" x 6" 1,000 299 605.00CJIB-20 78½" 54" 3.33" x 6" 2,000 414 677.00

DC-20/FC-70

MODELNUMBER

UNDER I-BEAMTO GROUND

I-BEAM USABLE LENGTH

I-BEAM(FLANGE x HEIGHT)

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

TJIB-3 76" 80" 2.66" x 4" 300 248 $462.00TJIB-6 76" 80" 2.66" x 4" 600 260 488.00TJIB-10 76" 80" 2.66" x 4" 1,000 343 609.00TJIB-20 76" 80" 2.66" x 4" 2,000 458 648.00

DC-20/FC-70

MODELNUMBER

UNDER I-BEAM FLOOR

I-BEAM(FLANGE x HEIGHT)

OVERALLHEIGHT

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

JIB-FM-3 99-1/2" 2.660" x 4" 103½" 300 405 $711.00JIB-FM-6 99-1/2" 3.332" x 6" 105½" 600 443 865.00JIB-FM-10 99-1/2" 3.332" x 6" 105½" 1,000 468 1,036.00JIB-FM-20 99-1/2" 4.000" x 8" 107½" 2,000 609 1,121.00

DC-20/FC-70

GANTRY AND JIB CRANES89

Work Area Portable Gantry CranesDesigned to maximize material handling requirements in light-duty lifting applications. Lightweight fixed height design allows for easy mobility. Includes four polyurethane-on-steel swivel casters. Welded steel construction. The straddle width is 68". Powder coat finish. Hoist and trolley can be ordered separately.

Festoon SystemDesigned to keep power cords out of danger when using electric trollies and/or hoists. Easily retrofits to any gantry or jib crane up to 240" (20 ft.) in length. 115V AC cord supplied.

Mini Overhead Cantilever JibsUtilize this unique jib in work cells and work areas. Unique fixed-height design allows for outriggers to be mounted underneath a work bench. Easily lift product from cart to workbench. Straddle width is 48" (ID). Hoist and trolley can be ordered separately. Steel construction.

Extra Travel Tri-Post JibsThis unique jib was designed for use in workstations. Place over the top workbench. Extra travel fixed-height I-beam overhangs workbench to allow lifting of products from cart to bench. Straddle width is 40" (ID). Hoist and trolley can be ordered separately. Not compatible with the Eye Manual Trollies. Steel construction.

Floor Mounted JibsThis fixed height floor mounted jib adapts well to many applications. Full 360° rotation allows personnel to completely utilize their workstation. Solid steel construction will assist workers in lifting awkward material. The overall I-beam length is 80" with a usable length of 70". Requires reinforced concrete pad for installation. Hoist and trolley can be ordered separately.

MODELNUMBER

UNDER I-BEAM TOBOTTOM FRAME

I-BEAM(FLANGE x HEIGHT)

OVERALLHEIGHT

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

JIB-LC-3 48" 2.660" x 4" 57" 300 164 $539.00JIB-LC-6 48" 3.332" x 6" 57" 600 215 554.00JIB-LC-10 48" 3.332" x 6" 57" 1,000 265 577.00JIB-LC-20 48" 4.000" x 8" 57" 2,000 378 675.00

DC-20/FC-70

MODELNUMBER

OVERALLLENGTH

CABLE SUPPORTLENGTH

OVERALLHEIGHT

I-BEAM(FLANGE x HEIGHT)

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

JIB-HC-3 89" 85" 43" 2.66" x 4" 300 144 $410.00JIB-HC-6 89" 85" 43" 2.66" x 4" 600 180 470.00JIB-HC-10 89" 85" 43" 2.66" x 4" 1,000 204 530.00JIB-HC-20 89" 85" 43" 2.66" x 4" 2,000 216 554.00

DC-20/FC-70

MODELNUMBER DESCRIPTION

I-BEAMFLANGE

CAPACITY(POUNDS)

NET WT.(LBS)

LIST PRICEEACH

E-MT-1 PLAIN 2" - 7" 1,000 20 $74.00E-MT-2 PLAIN 2" - 7" 2,000 25 103.00E-MT-4 PLAIN 2½" - 7" 4,000 35 152.00E-MT-6 PLAIN 3" - 9" 6,000 60 227.00E-MT-8 PLAIN 3" - 9" 8,000 105 288.00E-MT-1-C GEARED 1¾" - 8¾" 1,000 25 $111.00E-MT-2-C GEARED 2½" - 8¾" 2,000 30 144.00E-MT-4-C GEARED 2½" - 7" 4,000 45 178.00E-MT-6-C GEARED 3" - 7" 6,000 70 244.00E-MT-8-C GEARED 3" - 7" 8,000 100 342.00

DC-25/UPS/FC-70

MODELNUMBER

FITS BEAMFLANGE WIDTH HEADROOM

CAPACITY(POUNDS)

NET WT.(LBS)

LIST PRICEEACH

QIT-1 2½" - 4" 5.000" 1,000 15 $98.00QIT-2 2½" - 4" 6.250" 2,000 20 106.00QIT-4 2½" - 7" 7.125" 4,000 25 149.00QIT-6 3" - 7½" 7.687" 6,000 45 192.00QIT-8 3¼" - 11½" 8.875" 8,000 70 242.00

DC-25/UPS/FC-70

GANT

RY A

ND J

IB C

RANE

S90

Wall Jibs (for low ceilings)

Designed to assist workers in the maneuvering of materials as well as achieving maximum headroom where low ceilings are of concern. This cantilever style jib crane mounts to true vertical wall members. Increases personnel productivity by lifting awkward materials. The overall I-beam length is 92" with a usable length of 80". Hoist and trolley can be ordered separately.

Tie Rod Jibs (for high ceilings)

Achieve maximum floor space and utilize wasted air space. Mount to walls or columns to increase hook coverage over workstations. Unit rotates 180°. All steel construction provides years of service. Hoist and trolley can be ordered separately.

Quick Install Manual TrolliesThese trollies are dependable, easy, and safe to use. Designed to easily adjust to the width of virtually any S, H, W, and M type I-beam. Width is adjusted with manual screw mechanism. Includes locking ring to prevent trolley width from changing accidentally. Manual screw mechanism may also be tightened to prevent trolley from moving (similar to a Beam Clamp). Each trolley includes four rollers with sealed bearings for long life. A lifting eye is located at the bottom of the trolley for attaching a hoist (sold separately). Steel construction and painted finish.

Eye Manual TrolliesThese trollies have been designed to quickly install on virtually any S type I-beam. The width of the trolley is adjusted by rotating the center rod with lifting eye clockwise or counterclockwise. Once hoist (sold separately) is attached, center rod cannot be rotated which prevents trolley width from accidentally changing. Choose either plain trolley or geared trolley. Geared trolley is ideal for use when precise positioning of the trolley is required. The trolley includes four rollers with sealed bearings for long life. A lifting eye is located at the bottom of the trolley for attaching a hoist (sold separately). Steel construction and painted finish.

GEARED EYE MANUAL TROLLEYmodel E-MT-1-C

PLAIN EYE MANUAL TROLLEYmodel E-MT-1

MODELNUMBER

CAPACITY(POUNDS)

STANDARDLIFT (FEET)

MINIMUM DISTANCE BETWEEN HOOKS

HANDLELENGTH

NET WT.(POUNDS)

LIST PRICEEACH

ELH-05-5 500 5 9.45" 6" 5 $82.00ELH-15-5 1,500 5 12.8" 11" 18 $97.00ELH-15-10 1,500 10 12.8" 11" 21 104.00ELH-15-20 1,500 20 12.8" 11" 25 128.00ELH-30-5 3,000 5 15.0" 16" 30 $123.00ELH-30-10 3,000 10 15.0" 16" 35 140.00ELH-30-20 3,000 20 15.0" 16" 45 181.00ELH-60-5 6,000 5 19.0" 16" 52 $192.00ELH-60-10 6,000 10 19.0" 16" 59 209.00ELH-60-20 6,000 20 19.0" 16" 72 263.00

ADDITIONAL 12 POCKET TOOL STORAGE BAG, model BAG-12, $19.50 LIST DC-25/UPS/FC-85

MODELNUMBER

CAPACITY(POUNDS)

STANDARDLIFT (FEET)

MINIMUM DISTANCE BETWEEN HOOKS

HANDLELENGTH

NET WT.(POUNDS)

LIST PRICEEACH

PLH-15-5 1,500 5 11" 11" 15 $128.00PLH-15-10 1,500 10 11" 11" 18 138.00PLH-15-20 1,500 20 11" 11" 22 161.00PLH-30-5 3,000 5 15-1/2" 16" 23 $161.00PLH-30-10 3,000 10 15-1/2" 16" 27 187.00PLH-30-20 3,000 20 15-1/2" 16" 35 239.00PLH-60-5 6,000 5 22-7/16" 16" 35 $308.00PLH-60-10 6,000 10 22-7/16" 16" 42 320.00PLH-60-20 6,000 20 22-7/16" 16" 49 350.00

ADDITIONAL 12 POCKET TOOL STORAGE BAG, model BAG-12, $19.50 LIST DC-25/UPS/FC-85

MODELNUMBER

CAPACITY(POUNDS)

LIFT(FEET)

HEADROOM(INCHES)

NET WT.(POUNDS)

LIST PRICEEACH

HCH-1-10 1,000 10 11 22 $98.00HCH-1-15 1,000 15 11 26 113.00HCH-1-20 1,000 20 11 30 129.00HCH-2-10 2,000 10 12 26 $112.00HCH-2-15 2,000 15 12 34 129.00HCH-2-20 2,000 20 12 42 142.00HCH-4-10 4,000 10 14½ 45 $163.00HCH-4-15 4,000 15 14½ 54 186.00HCH-4-20 4,000 20 14½ 63 207.00

DC-25/UPS/FC-85

GANTRY AND JIB CRANES91

Economy Lever Hoists (weston brake)

Professional Lever Hoists (disc brake)

Hand Chain HoistsThese portable, lightweight hoists are durable and easy to operate. Compact design and low headroom allow installation in confined areas. Enclosed double ratchet pawls with self adjusting disc brake standard. Designed with a safety factor 4 times the rated capacity. Individually tested at 150% of the rated capacity. Features grade 80 black chain tempered to ISO 3077, galvanized pull chain, hardened two-stage gears, and forged steel upper and lower hooks with safety latches. Constructed of high quality steel components ideal for industrial applications. Meets ANSI B30.16-2003 requirements.

HAND CHAIN HOISTseries HCH

• 50% wider hardened ratchet gear• Grade 100 alloy chain for more strength with less weight• Chain guide system allows for horizontal operation• High impact resistant gear case and brake cover

• Precision Bearings• Disc Brake• Braking capacity is 4 times rated capacity• Manufactured to ISO-9002 quality standard• Triple chain guide for consistent up and down FREE WHEELING with one hand

• Completely enclosed Weston-Type brake• Deformation indicators on throat opening of both hooks• Drop forged hooks have durable latches and swivel 360 degrees• Written test certificate for 150% of rated capacity with individual serial numbers.

• Free wheeling chain in neutral position to quickly take up chain slack• Alloy steel chain grade 80

PROFESSIONAL LEVER HOISTseries PLH

ECONOMY LEVER HOISTseries ELH

Each unit comes standard with a rugged storage bag. Additional bags are available, model BAG-12

Each unit comes standard with a rugged storage bag. Additional bags are available, model BAG-12

MIGHTY-MINI LEVER HOISTmodel ELH-05-5

5 YEARWARRANTY

1 YEARWARRANTY

1 YEARWARRANTY

MODELNUMBER

CAPACITY(POUNDS)

F.P.M.RISE W/LOAD

F.P.M.LOWER W/LOAD

FULL LOADLOWERING SPEED

LIFT(FEET)

NET WT.(LBS)

LIST PRICEEACH

ACH-25 250 42 48 83 10 19 $2,766.00ACH-50 500 29 53 42 10 19 2,916.00ACH-CC CHAIN CONTAINER 2 $86.00

DC-20/FC-85

MODELNUMBER

CAPACITY(POUNDS)

FEET PERMINUTE

HEADROOM

LIFT(FEET) POWER

NET WT.(LBS.)

LIST PRICE EACH

ECH-03 300 16 11-1/16" 10 1 PHASE 26 $1,010.00ECH-06 600 8 11-1/16" 10 1 PHASE 32 1,162.00ECH-10-1PH 1,000 15 14" 10 1 PHASE 86 1,926.00ECH-20-1PH 2,000 16 16" 10 1 PHASE 90 2,396.00ECH-40-1PH 4,000 14 22-1/2" 10 1 PHASE 150 2,615.00ECH-10-3PH 1,000 7 14" 10 3 PHASE 86 $1,931.00ECH-20-3PH 2,000 7 16" 10 3 PHASE 90 2,812.00ECH-40-3PH 4,000 7 22" 10 3 PHASE 150 3,627.00ECH-CC CHAIN CONTAINER (FITS 300 & 600 LBS. UNITS) 5 $90.00ECH-CC-K CHAIN CONTAINER (FITS 1,000 TO 4,000 LBS. UNITS) 5 86.00

DC-20/FC-85

MODELNUMBER

CAPACITY(POUNDS)

HIGH SPEEDF.P.M.

LOW SPEEDF.P.M.

HEADROOM

LIFT(FEET)

NET WT.(LBS.)

LIST PRICE EACH

ECH-50M-6-1PH 525 44 10 37.8" 6 40 $3,050.00DC-20/FC-85

MODELNUMBER

CAPACITY(POUNDS)

FEET PER MINUTE

HEADROOM

LIFT(FEET) POWER

NET WT.(LBS.)

LIST PRICE EACH

ECH-ED-10-1PH 1,050 22 20½" 10 1 PHASE 46 $2,347.00DC-20/FC-85

MODELNUMBER

CAPACITY(POUNDS)

FEET PERMINUTE

MOTOROUTPUT (KW)

HEADROOM

LIFT(FEET) POWER

NET WT.(LBS.)

LIST PRICE EACH

H-1000-1 1,000 17.0 0.8 21-7/16" 15 1 PHASE 90 $1,187.00H-2000-1 2,000 17.0 1.2 22-13/16" 15 1 PHASE 105 1,344.00H-4000-1 4,000 8.5 1.2 29-1/8" 15 1 PHASE 145 1,607.00H-1000-3 1,000 20.5 0.8 21-7/16" 15 3 PHASE 90 $1,171.00H-2000-3 2,000 17.0 1.6 22-13/16" 15 3 PHASE 105 1,334.00H-4000-3 4,000 16.0 1.6 29-1/8" 15 3 PHASE 145 1,562.00

DC-20/FC-85

GANT

RY A

ND J

IB C

RANE

S92

Air Chain HoistsHeavy-duty air chain hoist can be used as a workstation hoist or as a production line hoist. Lightweight, rugged, and compact design - for ease of portability - makes this hoist perfect for most air hoist lifting applications. Standard lift is 10 feet assuming 90 PSI air pressure. Variable flow, two lever pendant for precise load spotting.

Electric Chain HoistsRuggedly built with power to handle most industrial lifting applications. Standard with push-button hand control with up and down controls. Single and three phase power available. Optional Chain Container stores surplus chain overhead to keep from interfering with operation.

series ACHShown with optional

chain container

model ECH-10-1PH

Manipulator Style Control Electric Chain HoistEngineered for maximum operator comfort and control. Features inline hand grip which allows one handed operation and gives the operator a free hand to easily position the load. Easy touch rocker switch above hand grip allows quick selection between low and high speed control. A wide range of adjustable speeds and single phase power make this hoist the perfect solution for many difficult product handling problems. Lightweight and compact die cast aluminum body. Standard with chain container.

model ECH-50M-6-1PH

High Speed Electric Chain HoistThis high speed single phase electric chain hoist offers the ability to lift heavy loads with ease and precision. Light, compact and powerful, this hoist can be easily installed, transported and offers high lifting speed. Features include double braking system for added protection, heavy-duty motor for industrial applications, high performance friction clutch to prevent overwinding and corrosion-resistant nickel-plated load chain. Standard with chain container.

model ECH-ED-10-1PH

New

New

Economy Chain Hoist with Chain ContainerThis compact hoist features a high efficiency motor with convenient 24V push-button operation. Single or three phase power available. Unit is dust and water resistant, load limit fitted, and features a 4:1 safety factor. Chain container included.

New

model H-1000-1

MODELNUMBER DESCRIPTION

BEAM FLANGEWIDTH

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

BC-2 BEAM CLAMP 2½" - 8½" 2,000 18 $45.00BC-4 BEAM CLAMP 2½" - 9¼" 4,000 20 52.00BC-6 BEAM CLAMP 4½" - 8½" 6,000 28 85.00BC-8 BEAM CLAMP 4½" - 8½" 8,000 40 104.00

DC-20/UPS/FC-70

MODELNUMBER

MINIMUM PLATE THICKNESS

MAXIMUM PLATE THICKNESS

CAPACITY(POUNDS)

THROATDEPTH

BALEOPENING

NET WT.(POUNDS)

LIST PRICEEACH

LPC-20 0 0.80" 2,000 2¼" 1.8" 12 $250.00LPC-40 0 1.10" 4,000 2¾" 2.2" 25 328.00LPC-60 0 1.50" 6,000 3¼" 1.9" 32 394.00

DC-25/UPS/FC-70

MODELNUMBER

MAXIMUMPLATE THICKNESS

WORKINGLOAD LIMIT (LBS.)

THROATDEPTH

BALEOPENING

NET WT.(POUNDS)

LIST PRICEEACH

CPC-10 1" 1,000 1½" 2-1/4" 9 $148.00CPC-20 1-3/16" 2,000 3" 3" 17 197.00CPC-40 1-3/8" 4,000 3" 3-3/4" 23 258.00CPC-80 1-3/4" 6,600 3" 5-1/4" 35 400.00

DC-25/UPS/FC-70

MODELNUMBER

MINIMUM PLATE THICKNESS

MAXIMUM PLATE THICKNESS

CAPACITY(POUNDS)

THROATDEPTH

BALEOPENING

NET WT.(POUNDS)

LIST PRICEEACH

EPC-10 0 0.60" 1,000 1.6" 1.1" 8 $103.00EPC-20 0 0.75" 2,000 2.8" 2.3" 18 165.00EPC-40 0 0.95" 4,000 2.8" 2.3" 20 230.00EPC-80 0 1.10" 6,600 3.0" 2.2" 38 344.00

DC-25/UPS/FC-70

MODELNUMBER

MAXIMUMPLATE THICKNESS

WORKINGLOAD LIMIT (LBS.)

BALEOPENING

NET WT.(POUNDS)

LIST PRICEEACH

HPC-20 1.2" 2,000 1.10" 13 $114.00HPC-40 1.4" 4,000 1.10" 15 133.00HPC-80 1.8" 8,000 1.50" 29 176.00HPC-140 2.0" 10,000 1.75" 32 309.00

DC-25/UPS/FC-70

GANTRY AND JIB CRANES93

Beam ClampsDesigned to reduce the I-beam flange stress by distributing loads away from the flange edges during overhead lifting applications. These versatile units can be interchanged from one gantry to another in a matter of seconds with its easy mechanical adjustment mechanism. A bar is located at the bottom of the beam clamp for attaching a hoist (sold separately). Steel construction and painted finish.

Positive Locking Plate ClampsGrips sheet until release ring is pulled. Serrated gripper is hardened tool steel. Forged head and gear. Safety factory is 2 to 1. Power coated finish. Designed to meet ASME B30.20 standards.

Vertical Plate Clamps with ChainDesigned for lifting plate material in a vertical position. Lifting eye includes chain for greater versatility. Heavy-duty steel construction for years of reliable use. Meets ASME B30.20 specifications.

Vertical Plate ClampsPivoting bale for easier and more versatile operation. Automatic serrated hardened steel cams and pads. Drop-forged steel case for maximum strength. Designed to meet ASME B30.20. Warning: Do not exceed the working load limit. Serious bodily injury or property damage may result.

Horizontal Plate ClampsDesigned for lifting plate material in horizontal position. Heavy-duty steel construction for years of reliable use. Meets ASME B30.20 specifications.

BEAM CLAMPSseries BC

POSITIVE LOCKING PLATE CLAMPseries LPC

VERTICAL PLATE CLAMPS WITH CHAINseries CPC

VERTICAL PLATE CLAMPSseries EPC

HORIZONTAL PLATE CLAMPSseries HPC

New

New

New

New

MODELNUMBER

WORKING LOADLIMIT (LBS.)

MAXIMUMBEAM WIDTH

NET WT.(POUNDS)

LIST PRICEEACH

BT-20 2,000 6" 15 $213.00BT-40 4,000 8" 18 255.00BT-60 6,000 10" 21 301.00

DC-25/UPS/FC-70

MODELNUMBER

SINGLE-LINECAPACITY

DOUBLE-LINECAPACITY

SINGLE-LINE CABLE LENGTH

NET WT.(POUNDS)

LIST PRICEEACH

LIST PRICE2 OR MORE

CABLE-P4 2,000 LBS. 4,000 LBS. ¼" x 120" 15 $29.80 $26.90DC-25/UPS/FC-50

MODELNUMBER

WORKING LOADLIMIT (LBS.)

MAXIMUMWIDTH OPENING

NET WT.(POUNDS)

LIST PRICEEACH

DLT-20 2,000 20" 67 $681.00DLT-25 2,500 28" 75 867.00DLT-30 3,000 38" 92 1,038.00

DC-25/UPS/FC-70

MODELNUMBER PIPE STYLE

WORKING LOADLIMIT (LBS.)

PIPE0.D.

NET WT.(POUNDS)

LIST PRICEEACH

PG-C-045 CAST IRON 450 4.00" 19 $195.00PG-C-060 CAST IRON 600 4.80" 19 210.00PG-C-100 CAST IRON 1,000 6.90" 24 255.00PG-C-140 CAST IRON 1,400 9.05" 36 281.00PG-C-200 CAST IRON 2,000 11.10" 72 460.00PG-S-045 STEEL 450 3.50" 19 $195.00PG-S-060 STEEL 600 4.50" 19 210.00PG-S-100 STEEL 1,000 6.63" 24 255.00PG-S-140 STEEL 1,400 8.63" 36 281.00PG-S-200 STEEL 2,000 10.75" 72 460.00

DC-25/UPS/FC-70

MODELNUMBER

LIFTINGCAPACITY (LBS.)

MAXIMUMCOIL WIDTH

MINIMUMCOIL RADIAL

MINIMUMINSIDE DIA.

NET WT.(POUNDS)

LIST PRICEEACH

CH-10-6 1,000 6" 13" 9" 12 $556.00CH-10-12 1,000 12" 13" 13" 24 592.00CH-20-8 2,000 8" 16" 10" 29 601.00

DC-25/UPS/FC-70

GANT

RY A

ND J

IB C

RANE

S94

Heavy-Duty Beam TongsDesigned for lifting I-beams with an overhead lifting device. The heavier the load the stronger the grip. Includes lifting ring for easy use with overhead hoist. Loads need to be centered and guided during lifting operation. Manufactured to ASME B30.20 standards.

Galvanized Two-Speed Cable PullerGreat for use in horizontal pulling applications such as positioning equipment, stringing lines, and emergencies. Can be used in both single and double-line pulling applications. Handle ratchets to take up cable. When handle is rotated all the way back, the cable reel will free-wheel. Handle length is 30". Minimum headroom is 24". Single-line cable length is ¼" x 120" (cable length is 60" when used as a double-line). Not for use in vertical lifting applications.

Heavy-Duty Die Lifting TongsDesigned for lifting dies with overhead lifting devices. Includes lifting ring for easy use with overhead hoist. Manufactured to ASME B30.20 standards.

HEAVY-DUTY BEAM TONGSseries BT

HEAVY-DUTY PIPE GRABSseries PG-C

Heavy-Duty Pipe GrabsDesigned for lifting pipe (cast iron or steel) with overhead lifting device. Automatic operation allows for easy use by anyone. Loads must be centered and guided during lifting operations. Heavy-duty steel construction with painted finish.

HEAVY-DUTY DIE LIFTING TONGS

series DLT

Overhead Coil HooksDesigned for lifting heavy coils with an overhead lifting device. Easily position coils from horizontal to vertical position. Steel construction with painted finish.

OVERHEAD COIL HOOKSseries CH

GALVANIZED TWO-SPEED CABLE PULLERmodel CABLE-P4

New

New

New

New

MODEL NUMBERRUNWAYLENGTH

BRIDGELENGTH

CAPACITY OF CRANESWEIGHT / LIST PRICE

(FEET) (FEET) 500 LBS. 1,000 LBS. 2,000 LBS.B1020-(capacity) 20 10 1575 / CALL 1890 / CALL 2835 / CALLB1030-(capacity) 30 10 2289 / CALL 2467 / CALL 3412 / CALLB1520-(capacity) 20 15 1758 / CALL 2124 / CALL 3076 / CALLB1530-(capacity) 30 15 2478 / CALL 2709 / CALL 3685 / CALLB2020-(capacity) 20 20 2205 / CALL 2499 / CALL 2320 / CALLB2030-(capacity) 30 20 3150 / CALL 3475 / CALL 4389 / CALL

DC-20/FC-70

MODELNUMBER

CAPACITY(POUNDS)

STROKE(FEET)

CABLE DIAMETER(APPROX. INCHES)

NET WT.(POUNDS)

LIST PRICEEACH

CP-15 1,500 60 5/16 35 $187.00CP-30 3,000 60 7/16 60 262.00

*MEETS CSIR FOR USE IN MINING INDUSTRY DC-25/UPS/FC-70

MODELNUMBER

SINGLE-LINECAPACITY (LBS.)

DOUBLE-LINECAPACITY (LBS.)

LIFTING SPEED(FEET PER MINUTE)

NET WT.(LBS)

LIST PRICEEACH

MINI-2 100 200 30' 36 $158.00MINI-4 200 400 30' 48 227.00

SWIVEL HOOK FOR ATTACHING TO STANDARD TROLLEY, MODEL MINI-SH, $45.00 LIST DC-25/UPS/FC-70

MODELNUMBER

UP/DOWNSTROKE

MAXIMUMARM LENGTH

CAPACITY(POUNDS)

ARMROTATION

AIRPRESSURE

NET WT.(LBS.)

LIST PRICEEACH

DSJ-300 57½" 93" 250 360° 100 psi 670 $4,305.00DC-20/FC-70

MODELNUMBER DESCRIPTION

CAPACITY(POUNDS)

NET WT.(LBS.)

LIST PRICEEACH

VAC-6 PNEUMATIC VACUUM 250 32 $3,651.00LMEC-SA SCISSOR ACTION 250 19 940.00LMEC-DH DOUBLE HOOK 250 20 747.00

DC-20/UPS/FC-70

GANTRY AND JIB CRANES95

Self-Supporting Bridge CranesThe system is composed of modular units so that the components can be reused when the layout is changed. The system does not require any electrical power. The overall height is 14 feet.

Long Reach Cable Pullers/LiftersThis product is ideal for applications requiring pulling over long distances. Pull up to 60 feet without unhooking and resetting as required when using conventional lever or hand chain hoists. Works great for pulling horizontally. Not for use in vertical lifting applications.

Mini Cable HoistsDesigned for lifting loads up to 400 pounds. Can be used in both single-line and double-line lifting applications. Cable length is 36 ft. when used as a single-line -- 18 ft. when used as a double-line. Includes electric motor and hand-held push button controls. Motor operates on 115V AC power. Optional Swivel Hook Plate must be ordered for attaching hoist to a trolley (trolley not included).

Air Balance Jib LifterThe Air Balancer achieves high performance, excellent safety, and low cost in the handling of heavy materials. Designed to effortlessly handle materials in a three dimensional work space. The push-button hand control operates the pneumatic cylinder, raising and lowering the cable, in turn, positioning the load.

AIR BALANCEJIB LIFTER

model DSJ-300

PNEUMATIC VACUUMmodel VAC-6

SCISSOR ACTIONmodel LMEC-SA

DOUBLE HOOKmodel LMEC-DH

Mechanical & Pneumatic Hoist AttachmentsPneumatic Vacuum Lifter is designed to lift products with smooth, flat, and non-porous surfaces. Push button to operate vacuum to grab product. Release button to release product. Positioning of product is provided by the Air Balance Jib Lifter.

Scissor Action Lifter is designed to lift round cylindrical products like pipe and tubing. Mechanical operation only. Positioning of products is provided by the Air Balance Jib Lifter or Hoist.

Double Hook Lifter is designed to lift virtually any type of object, either small or large, long or short, round or flat. Simple double-hook design with mechanical operation only. Positioning of product is provided by the Air Balance Jib Lifter or Hoist.

MODELNUMBER

SPAN(FEET)

USABLE HEIGHT (FEET)

CAPACITY(POUNDS)

NET WT.(LBS.)

LIST PRICEEACH

JIB-P-10-6-6 6 6 1,000 568 $1,197.00JIB-P-10-6-8 6 8 1,000 608 1,252.00JIB-P-10-6-10 6 10 1,000 648 1,328.00JIB-P-10-8-6 8 6 1,000 600 1,229.00JIB-P-10-8-8 8 8 1,000 640 1,296.00JIB-P-10-8-10 8 10 1,000 680 1,362.00JIB-P-10-10-6 10 6 1,000 632 $1,352.00JIB-P-10-10-8 10 8 1,000 672 1,419.00JIB-P-10-10-10 10 10 1,000 712 1,485.00JIB-P-B EXTRA BASE SOCKET, 31"H WITH 17" x 17" BASE 145 $426.00

DC-20/FC-70

MODELNUMBER DESCRIPTION

SWING REACH(MIN x MAX)

MAXIMUM HOOK HEIGHT

CAPACITY(POUNDS)

NET WT.(LBS.)

LIST PRICEEACH

VAN-J MANUAL 0" to 42" 36" 400 120 $383.00VAN-J-DC* DC POWERED 0" to 42" 28" 400 160 622.00VAN-BB BATTERY BOX 5 $17.00VAN-BATT BATTERY 55 94.00BC BENCH TOP STYLE BATTERY CHARGER 8 122.50

*VAN-J-DC INCLUDES BATTERY-POWERED WINCH DC-20/FC-70

MODELNUMBER BOOM

CAPACITY(POUNDS)

BOOMREACH

LIFTRANGE

NET WT.(POUNDS)

LIST PRICEEACH

WTJ-2EXTENDED 500 49¼" 0 TO 105"

141 $217.00RETRACTED 1,000 32¾" 13" TO 90½"

DC-20/UPS/FC-70

MODELNUMBER

CAPACITY(POUNDS)

I-BEAMLENGTH (FT.)

I-BEAMHEIGHT

I-BEAMFLANGE WIDTH

BASEHEIGHT

NET WT.(LBS.)

LIST PRICEEACH

JIB-CB-25-8-10 250 8 6" 3.38" 18" 413 $2,533.00JIB-CB-25-10-10 250 10 6" 3.56" 18" 433 3,746.00JIB-CB-50-8-10 500 8 6" 3.56" 18" 463 3,710.00JIB-CB-50-10-10 500 10 8" 4.00" 36" 483 4,932.00JIB-CB-100-8-10 1000 8 8" 4.13" 36" 585 4,801.00JIB-CB-18-B OPTIONAL CONCRETE-fILLED COUNTERBALANCE

BASE WITH fORK POCKETS18" 2,815 $321.00

JIB-CB-36-B 36" 5,630 413.00DC-20/FC-70

GANT

RY A

ND J

IB C

RANE

S96

Multi-Station Transportable Jib CranesDesigned for use in multiple locations, includes jib crane and one base socket. Extra base sockets may be purchased for use in other locations. Friction brake design allows positive locking and controlled rotation of heavy loads. 360° continuous rotation of heavy loads. Handle most applications up to 1,000 lbs. and up to 120" radius reach. Standard 4" high I-beam on all units with 2.663" flange width. Rugged welded steel construction. Hoist and trolley sold separately.

Portable Jib Cranes with optional cement counterbalance base

Unique design allows for easy transportation of jib crane with a fork truck. Standard base included with jib crane is not filled with concrete (instructions included for proper filling). Base may be ordered pre-filled with concrete for immediate use. Base measures 42" x 42" and includes built-in fork tubes. Fork tubes are 7½"W x 2½"H usable. Fixed length I-beam will pivot 360° for complete access. Upright vertical column bolts to base. Steel construction. Units ship knocked down. Not for use as a fork truck attachment.

18"H base requires (41) 60 lbs. bags of Sakrete mix

36"H base requires (82) 60 lbs. bags of Sakrete mix

Lifter JibsLift items from the ground to van floor height, then rotate into cargo area. Hand crank winch is standard, battery powered winch is optional. Battery powered winch includes 36" long leads - battery not included. Van floor to raised hook height is 38". Double-pivot arm for use in tight spaces. Overall height is 47". Mounting plate measures 8" x 8". Steel construction. Painted finish.

model VAN-J-DC

model VAN-J

Winch Operated Truck Jib CraneInstalled in your pick-up truck bed, this winch operated jib crane will help lift loads up to 1,000 pounds. Lift items from ground to truck bed height, then rotate into cargo area. Includes telescopic boom design with manual hydraulic hand pump to pivot boom up and down. Manual cable winch (with ¼" cable diameter) to lift and lower loads. Unit comes with one grab hook, one chain slot lock, and one sling hook with latch. Mounting plate is 10½" by 10½". Base height is 12½". Overall height is 56". The crane swivels on a 360° base. Safety yellow in color. Welded steel construction.

New

New

MODELNUMBER

CAPACITY(POUNDS)

BOOMLENGTH

BOOMHEIGHT

NET WT.(LBS.)

LIST PRICEEACH

FOLDING DESIGN FOR STORAGE (33½"W x 44"L x 60½"H) -- (FOLDABLE LEGS)

EHN-20-C

2,000 35¼" 13¾" to 73¼"

175 $219.001,500 38¾" 10½" to 76"1,000 42½" 7¼" to 79"500 46" 4" to 82¼"

EHN-40-C

4,000 40" 21" to 85¾"

215 $299.003,000 47" 15" to 91¼"2,000 54" 9" to 96¾"1,000 61¼" 3" to 102"

FIXED - WILL NOT FOLD FOR STORAGE -- (TELESCOPIC LEGS)

EHN-40-T

4,000 47½" 35¼" to 85¼"

245 $279.003,000 56½" 31½" to 88½"2,000 65½" 27½" to 93¾"1,000 76½" 23¾" to 99"

EHN-60-T

6,000 52" 22" to 84"

330 $529.004,000 60" 16¾" to 88"3,000 68" 11½" to 92½"2,000 76¼" 6¼" to 96¾"

DC-20/FC-200

ITEMMODEL

NUMBER OPERATIONCAPACITY(POUNDS)

BOOMREACH

BOOMHEIGHT

NET WT.(LBS.)

LIST PRICEEACH

A WTJ-20-3-DC 12V DC 2,000 40" to 63" 52" - 85" 280 $2,047.00A WTJ-20-4-DC 12V DC 2,000 52" to 87" 52" - 83" 298 2,131.00A WTJ-20-3-AC 115V AC 2,000 40" to 63" 52" - 87" 280 2,540.00A WTJ-20-4-AC 115V AC 2,000 52" to 87" 53" - 83" 298 2,628.00B WTJ-E-15-3-DC 12V DC 1,500 42" to 66" 53" - 70" 140 $1,639.00B WTJ-E-15-3-AC 115V AC 1,500 42" to 66" 53" - 70" 140 2,083.00

DC-20/FC-70

MODELNUMBER

CAPACITY(POUNDS) REACH

MAXIMUMHEIGHT

MINIMUMHEIGHT

NET WT.(LBS.)

LIST PRICEEACH

FOLDED SIZE: 33½"W x 44"L x 60½"H

EHN-40-C-AH

4,000 40" 85¾" 21"

205 $367.003,000 47" 91¼" 15"2,000 54" 96-9/16" 9"1,000 61¼" 102" 3"

DC-20/FC-125

GANTRY AND JIB CRANES97

Shop Crane Engine HoistsThese portable units are great for hundreds of lifting applications. Telescopic boom for multiple lifting heights and capacities. Boom is raised and lowered with a manual hydraulic hand pump. The high-capacity hydraulic cylinder provides for faster lifting action and features a large diameter ram to withstand angled loads when lifting. Includes two rigid and two swivel casters for portability. Heavy-duty steel construction and painted finish.

model EHN-20-CFOLDABLE LEGS

model EHN-40-TTELESCOpiC LEGS

Power Lift Jib CranesDesigned for material handling applications on docks, in warehouses or in truck beds. Choose either intermittent or continuous duty winches with reaches from 3 to 9 feet. Available in AC or DC power. Meet ANSI and OSHA specifications.

A) Intermittent use cranes feature rotation hand brakes that offer unlimited 360° positioning. Mast mounts permanently. Boom adjusts in 12" increments and can be positioned at 3 elevations. DC models include 25 feet of 3/16" aircraft-grade wire rope with swivel hook and safety latch. Folds for storage. Choose either 12V DC, 1/3HP with 12 foot removable plug-in pendant control or 120V AC 1/2 HP with fingertip switch to raise and lower hook.

B) The economical answer to your material handling problems. Offers light-duty, intermittent use. Up to 1500 pounds capacity at 36" boom extension. 360° locking manual rotation, 25 feet of 5/32" cable with swivel snatch block and safety latch. 12" x 12" mounting plate.

A

B

Air/Hand Pump Hydraulic Shop CraneOur Air/Hand Pump Hydraulic Shop Crane allows one person to not only maneuver product from one location to another, but lift the product effortlessly with assistance of everyday factory air. In remove areas where your airline does not reach you can lift your product with the hand pump hydraulic option. Air raises unit 7" to 8" per second while hand pump raises units ½" per stroke. Units roll smoothly on 3½" x 1¼" cast steel casters. The innovative hoist offers heavy-duty lifting power, while optimizing space when in the folded position. Standard features: foldable legs, adjustable boom, swivel hook, and steel construction. New

New

DVD or VIDEOAVAILABLE

DVD or VIDEOAVAILABLE

MODELNUMBER

OVERALL SIZE(W x L x H)

ARM LENGTHBEYOND FRAME

MAXIMUMCAPACITY

PHENOLICCASTERS

NET WT.(LBS.)

LIST PRICEEACH

P-JIB-2 34" x 84" x 63" 48" 2,000 lbs. 8" x 2" 850 $2,430.00P-JIB-4 34" x 84" x 63" 48" 4,000 lbs. 8" x 2" 1050 2,680.00

OPTIONAL BALLAST, MODEL P-JIB-BALL-2, $600.00 LIST, NET WEIGHT 1,850 LBS. DC-20/UPS/FC-100OPTIONAL BALLAST, MODEL P-JIB-BALL-4, $930.00 LIST, NET WEIGHT 3,650 LBS.

MODELNUMBER

UP/DOWNSTROKE

ARMLENGTH

OVERALL SIZE(W x L)

CAPACITY(POUNDS)

NET WT.(LBS.)

LIST PRICEEACH

H-TRAIL 30" to 91" 53½" to 77½" 47½" x 72" 4,000 465 $1,219.00DC-20/FC-100

MODELNUMBER

MAXIMUM CAPACITYAT BOOM HEIGHT

RIGID LOADWHEEL

SWIVEL REARCASTER

NET WT.(LBS.)

LIST PRICEEACH

CBFC-500 500 lbs. @ 24"-86" 8" 6" 1089 $2,269.00CBFC-1000 1,000 lbs. @ 24"-90" 8" 6" 1508 3,110.00CBFC-2000 2,000 lbs. @ 34"-96" 8" 6" 2610 4,211.00

DC-20/FC-100

MODELNUMBER

RODLENGTH

RODDIAMETER

OVERALLWIDTH

CAPACITY(POUNDS)

NET WT.(LBS.)

LIST PRICEEACH

HDP-CL 36" 2¾" 21" 1,500 375 $982.00DC-20/FC-125

GANT

RY A

ND J

IB C

RANE

S98

Portable Cantilever Hoists•SwivelCraneforSideLoading•OutriggerstoIncreaseStability•DoubleActingManualHydraulicHandPump•ControlledLowering•AdjustableSwingOutriggerswithLeveling JackstoStabilizeUnittoFrontorSide•Expedited&IncreasedCableDownReach•CustomerSuppliedBallastorOptionalFactorySuppliedBallestAvailable

CAPACITY ATARM LENGTH

MODEL P-JIB-2(POUNDS)

MODEL P-JIB-4(POUNDS)

27" 2,000 4,00034" 1,600 3,20041" 1,300 2,60048" 1,100 2,200

Hoist TrailerUniquehoistmaybetowedbehindacarortrucktojobsiteandthenusedforhundredsofapplications.Includesaclass2ballcouplerandsafetychainsforusewithmostcommonhitches.Features(2)large18"diameterpneumaticwheels,(2)swivelcasters4"x2"inrear,(2)rigid5"x2"infrontandoneswivelclevishookwithsafetylatchattheendoftheboom.Telescopingliftarmandlegsandaremovablejackhandlestandard.Weldedsteelconstructionwithpaintedfinish.Optionalbrakelightkitwithwiringharnessavailable.

Lift Arm Projections:Beyond Frame: 48"Outriggers: 40"Casters: 8" Phenolic

Counter Balanced Floor CranesThisCounterBalancedFloorCranehasanadjustableboomtoallowformaximumadjustmentandversatilitytoliftavarietyofloads.Boomisraisedwithamanualhydraulichandpump.Boomalsotelescopesoutforgreaterreach.Thecounterbalancedesigneliminatestheneedforfrontlegs.Thismakestheuniteasiertomaneuverandallowsthecranetoreachtight,hardtoreachareas.Counterbalanceincluded.Weldedsteelconstruction.

DOUBLE-ACTINGHAND PUMP

OUTRIGGER

LEvELING JACk

Coil LifterThehoistmountedCoilLifterhasadjustablebalancepointstoaccommodatedifferentsizedcoils.Coilscanbeupto90"indiameterandweighasmuchas1,500pounds.Thetopadjustingbailallowstheoperatortoinsureleveltransportationofload.Coilliferiscompactforeasystorage.Steelconstruction.Paintedfinish.Liftingringandhoistsoldseparately.

DVD or VIDEOAVAILABLE

MODELNUMBER OPENING HEIGHT

USABLELOAD HEIGHT

FORK SIZE(W x L x H)

CAPACITY(POUNDS)

NET WT.(LBS)

LIST PRICEEACH

ADJUSTABLE FORK WIDTH 17½" TO 36"OLA-2-42 40¾", 52½", 64½" 51", 62¾", 74½" 4" x 42" x 2" 2,000 583 $1,391.00OLA-4-42 40¾", 52½", 64½" 51", 62¾", 74½" 4" x 42" x 2" 4,000 665 1,650.00

FIXED FORK WIDTH AT 27"OLF-2-42 40¾", 52½", 64½" 51", 62¾", 74½" 4" x 42" x 2" 2,000 552 $1,628.00OLF-4-42 40¾", 52½", 64½" 51", 62¾", 74½" 4" x 42" x 2" 4,000 631 1,907.00

DC-20/FC-70

MODELNUMBER

FORKLENGTH

OVERALLFORK WIDTH

FORK SIZE(W x H)

BAIL(W x H)

CAPACITY(POUNDS)

NET WT.(LBS.)

LIST PRICEEACH

HDP-2-36 36" 25" 2" x 2" 3" x 5" 2,000 431 $1,156.00HDP-2-42 42" 25" 2" x 2" 3" x 5" 2,000 443 1,215.00HDP-2-48 48" 25" 2" x 2" 3" x 5" 2,000 486 1,256.00

HDP-4-36 36" 25" 4" x 2" 3" x 5" 4,000 626 $1,402.00HDP-4-42 42" 25" 4" x 2" 3" x 5" 4,000 687 1,494.00HDP-4-48 48" 25" 4" x 2" 3" x 5" 4,000 768 1,666.00

HDP-6-42 42" 25" 6" x 2" 4" x 7" 6,000 776 $1,841.00HDP-6-48 48" 27" 6" x 2" 4" x 7" 6,000 961 2,133.00HDP-6-54 54" 30" 6" x 2" 4" x 7" 6,000 992 2,308.00

ADJUSTABLE BAIL, MODEL HDP-AB, $85.00 LIST DC-20/FC-125

MODELNUMBER DESCRIPTION

EYELET HEIGHTMIN. / MAX.

CAPACITY(POUNDS)

NET WT.(LBS)

LIST PRICEEACH

STEEL CONSTRUCTIONTRI-SA ADJUSTABLE HEIGHT LEGS 8'6" to 13' 6" 2,000 285 $932.00TRI-SF FIXED HEIGHT LEGS 8'6" (fixed) 2,000 285 767.00

ALUMINUM CONSTRUCTIONTRI-AA ADJUSTABLE HEIGHT LEGS 8'6" to 13' 6" 1,000* 215 $1,821.00TRI-AF FIXED HEIGHT LEGS 8'6" (fixed) 1,000* 215 1,482.00

CAPACITY FOR MATERIAL 1,000 LBS./CAPACITY FOR PERSONNEL 500 LBS. DC-20/FC-70

MODELNUMBER

MAXIMUMROLL LENGTH

CAPACITY(POUNDS)

NET WT.(POUNDS)

LIST PRICEEACH

SBRL-25 6 FT. 2,500 140 $617.00SBRL-40 6 FT. 4,000 280 751.00SBRL-80 8 FT. 8,000 450 1,044.00

DC-20/FC-70

GANTRY AND JIB CRANES99

Deluxe Overhead Load LiftersThe Deluxe Overhead Load Lifter is designed for lifting and moving pallets, skids and crates with an overhead lifting crane. Includes an adjustable bail for keeping the load level when moving. Includes three height positions for use with different sized loads. Series OLA features adjustable-width forks. Series OLF features fixed-width forks. Usable fork length is 42" on all units. Welded steel construction. Painted finish.

Pallet LiftersThese solid steel constructed lifters contain tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load. Meets ASME B30.20 Standard 1993. Painted finish.

Tripod Hoist StandsPortable and adjustable height tripod provides a convenient and economical lifting support stand. Available in steel or aluminum construction. Independently adjustable legs enable use on uneven surfaces. Adjust leg height in six inch increments. Unit folds for convenient portability and storage. Great for access to confined spaces Features padded pivots for smooth or spiked feet. The spiked feet are designed to be used in rough terrain. A swivel eyebolt and safety chain are standard. Chain hoist not included. Meets ANSI safety requirements for confined space Z117.1.

SMOOTH PAD SPIKE PAD

Spreader Beam Roll LifterAdjustable roll lifter utilizes your overhead hoist to position roll material. Core rod is 2½" diameter. Ideal when headroom is limited. Designed to meet ASME B30.20. Width is adjustable on 4" increments.