Fittings Catalog 2016 - fitandcp.com...Fittings made of stainless steel are durable, reusable and...

1

CATALOG

2016

Our reputation is stainless

3

IND

EX ABO

UT FITTIN

GS, IN

CAbout Fittings, Inc.How to use this catalogConversions

Adapters – Straight and ElbowsAdapters – Tees and CrossesBarbed ManifoldsBarbed Tees, Y-Tees and CrossesBeerCaps and PlugsCheck Valves for SodaCold PlatesCompressionMiscellaneousNuts, Stems and WashersOetiker ClampsQuick Disconnect AdaptersSplicersStarter KitsSwivelsU-BendsU-Bend ManifoldsValves and PumpsWelded Barb Elbows

Fittings Index

Fittings, Inc.3300 Fisher AvenueFort WorthTexas 76111 (USA)

800-473-3301

817-332-3300

817-332-5102

[email protected]

www.fitandcp.com

To be the best supplier in the beverage industry.

Fittings, Inc. was founded in 1983 in Fort Worth, Texas. At that time the primary products were (and still remain today) stainless steel fittings for the beverage industry. In 1991, we also began manufacturing cold plates, which are the preferred solution for cooling dispensed beverages in the US. In 2009, we started distributing products in Europe to better serve that market.

Fittings, Inc. is a privately-held company.

The majority of our products are manufactured in our Fort Worth facility. However, the company has adapted over time to changing business conditions, and sources products wherever it makes the most sense.

Here at Fittings, Inc. we understand if we don’t provide great customer service, someone else will. We also understand we are part of a global community, so the way we treat our employees and the environment is as equally important as revenue.

Fittings made of stainless steel are durable, reusable and perform better over time than plastic fittings, which can deteriorate and leak. Our fittings are precision-tooled for consistently clean welds and sharp barbs, ensuring a tight fit without leakage un-der pressure.

Our stainless steel fittings are made from a combination of 303 and 304 materials. Type 303 is certified to either ASTM A581/A582 or AMS 5640. Type 304 is certified to AMS 5639 or ASTM A479. In cases where tubing is used, it is 304 stainless steel certified to ASTM A269.

All of the stainless steel that enters our plant is certified by the steel mill from which we purchase. Copies of these certifications will be furnished upon request. Our fit-tings are periodically tested for sulfur and leachable iron content by an independent, bonded testing laboratory. Reports on the test will be furnished upon request.

All stainless steel fittings are passivated per ASTM A967 to meet the standards of major food and beverage companies. All fittings are made of stainless steel except for nickel-plated brass nuts and brass check valves.

All beverage fittings manufactured and/or sold by Fittings, Inc. are guaranteed to be free of defects in workmanship and materials for a period of one year. Our warranty is limited to replacing parts. We maintain the right to inspect the product to determine if it is, in our opinion, defective. Fittings, Inc. will not be liable for indirect or consequen-tial damages or expenses which might result from using our products. Any warranties except the above, express or implied, are excluded.

OUR VISION

PARTICULARS

WHO

HOW

AWARENESS

OUR FITTINGS

STATEMENT OF WARRANTY

CON

TACT

345

19163011361525504443

64645

8483026273211

51

GENERAL

FITTINGS

ADDRESS

TOLL FREE

PHONE

FAX

E-MAIL

WEB

4 5

CON

VERSION

SH

OW

TO

USE

TH

IS C

ATAL

OG

Nominal Inch Actual Barb OD (") Actual Barb OD (mm) Matching Thread Nominal Millimeter

1/8" 0.160" 4.01 mm 4 mm

5/32" 0.180" 4.52 mm 4.4 mm

3/16" 0.250" 6.35 mm 6 mm

1/4" 0.290" 7.24 mm 7/16" 20 UNF 6.5 mm / 7 mm

5/16" 0.340" 8.71 mm 1/2" 16 UNF 8 mm

3/8" 0.390" 9.96 mm 5/8" 18 UNF 9 mm / 9.5 mm / 10 mm

7/16" 0.440" 11.48 mm 11 mm

1/2" 0.530" 13.51 mm 3/4" 16 UNF 13.5 mm

3/4" 0.782" 19.86 mm 20 mm

Our engineering staff is available to produce prototypes generated from your draw-ings and/or ideas.

Fittings Inc. supports worldwide concerns that metals mined in the conflict areas of the Democratic Republic of the Congo (DRC) may be making their way into the sup-ply chain. Fittings Inc. policy requires that it complies with the expectations in the EICC program by surveying its supply chain partners to gather smelter names, using EICC Conflict Free Smelters only and certify in writing they do not knowingly procure gold, tantalum, tungsten or tin, from conflict areas of the DRC, for use in products it produces or sells. Due to traceability issues and the lack of mines or smelters effec-tively participating in the regulation, Fittings Inc. cannot currently certify with 100% certainty that our supply chain is Conflict Free until supply chain transparency is more discernable.

The subsequent pages of this catalog contain diagrams and tables with data for each family of fittings. Each diagram has several letters on it that correspond to the relevant table’s column headers wherein you will find the measurements for a particular part number.

All barbs are listed in inches and millimeters. The inch measurement represents the ID of the tubing for which the barb is designed to work. The millimeter measurement is the actual outside diameter of the barb.

All threaded fittings are listed in the Unified Thread Standard format, e.g. 7/16" 20 UNF.

All length and height data are actual measurements of the fittings in both inches and millimeters.

Nuts, stems, washers and some flare-based fittings are only interoperable with other specific part numbers. We have color-coded some fittings’ part numbers to help clarify which parts are interoperable. Part numbers of the same color may be used together.

– These fittings are part of our “economy line.” For most, the part number listed directly above it in the fittings table will be the identical US manufactured version of the economy fitting and will have a similar part number, e.g. 7012 and 9012.

CUSTOM WORK

DRC CONFLICT FREE SOURCING

FITTING TABLES

BARBS

THREADED FITTINGS

LENGTH/HEIGHT

PART NUMBER COLOR CODING

THE CONVERSION TABLE

Barb size designated to match the ID of beverage tubing.

The actual outside diameter of the barbed fitting in decimal format in inches.

The actual outside diameter of the barbed fitting in millimeters.

The unified thread standard that is normally used with a nominal inch fitting, e.g. a 1/4" nut has a 7/16" 20 UNF thread count.

Best practice conversion of inch based fittings onto metric based beverage tubing, e.g. 1/2" barb fitting can be used on 13.5 mm OD beverage tubing.

NOMINAL INCH

ACTUALBARB OD (")

ACTUAL BARB OD (MM)

MATCHING THREAD

NOMINAL MILLIMETER

6 7

NU

TS, S

TEM

S &

WAS

HER

S

Parts with the same color coding of the part number are interoperable. Example: 1001 nut works with a 3006 stem and a 8007 washer.

Color Coding Guide

SKU Thread Type Color

1/4" White

5/16" Red

3/8" Black

8011 1/2" Off-White

8009

SKU A (Barb) B (Length)

3014 1/8" 4.01 mm

0.87" 22.0 mm

3203 5/32" 4.52 mm

0.84" 21.3 mm

3006 1/4"7.24 mm

0.94" 23.9 mm

3310 5/16" 8.71 mm

0.94" 23.9 mm

3186 1/8" 4.01 mm

0.67" 17.0 mm

3204 5/32" 4.52 mm

0.89" 22.6 mm

3007 1/4" 7.24 mm

1.00" 25.4 mm

3023 3/8" 9.96 mm

0.95" 24.1 mm

3008 1/4" 7.24 mm

1.00" 25.4 mm

3009 3/8" 9.96 mm

0.95" 24.1 mm

3135 3/8" 9.96 mm

1.20" 30.5 mm

3129 1/2" 13.51 mm

0.94" 24.0 mm

3245 3/8" 9.96 mm

1.06" 26.9 mm

3157 1/2" 13.51 mm

1.00" 25.3 mm

SKU A (Threads) B (Width) Material

1001 1/4" (7/16-20) 0.59"15.0 mm Nickel-Plated Brass



1018 5/16" (1/2-16) 0.63" 15.9 mm Nickel-Plated Brass




3196 1/4" (7/16-20) 0.59" 15.0 mm Stainless Steel

3178 3/8" (5/8-18) 0.69" 17.5 mm Stainless Steel

STEMS

NU

TS, STEMS &

WASH

ERS

FLARE WASHERS

NUTS

8008

8007

B

A

B

8 9

SPLICERSSP

LICE

RS


7107 1/8"4.01 mm

1.56"39.62 mm

9107 1/8"4.01 mm

1.56"39.70 mm

3022 3/16"6.35 mm

1.63"41.30 mm

4001 1/4"7.24 mm

1.63"41.30 mm

9001 1/4"7.24 mm

1.75"44.50 mm

3220 5/16"8.71 mm

1.63"41.30 mm

3013 3/8"9.96 mm

1.63"41.30 mm

9013 3/8"9.96 mm

1.62"41.10 mm

3234 7/16"11.48 mm

1.63"41.30 mm

3130 1/2"13.51 mm

1.75"44.50 mm

9130 1/2"13.51 mm

1.80"45.70 mm

SPLICERS – REDUCERS

SKU A (Barb) B (Barb) C (Length)

7117 1/8"4.01 mm

1/4"7.24 mm

1.67"42.5 mm

7118 1/8"4.01 mm

3/8"9.96 mm

1.67"42.5 mm

7131 5/32"4.52 mm

1/4"7.24 mm

1.70"43.3 mm

7145 5/32"4.52 mm

3/8"9.96 mm

1.71"43.4 mm

3059 3/16"6.35 mm

1/4"7.24 mm

1.63"41.3 mm

3021 3/16"6.35 mm

5/16"8.71 mm

1.63"41.3 mm

3010 3/16"6.35 mm

3/8"9.96 mm

1.63"41.3 mm

3223 1/4"7.24 mm

5/16"8.71 mm

1.63"41.3 mm

9223 1/4"7.24 mm

5/16"8.71 mm

1.63"41.3 mm

7012 1/4"7.24 mm

3/8"9.96 mm

1.62"41.0 mm

9012 1/4"7.24 mm

3/8"9.96 mm

1.63"41.3 mm

3060 1/4"7.24 mm

7/16"11.48 mm

1.63"41.3 mm

3137 1/4"7.24 mm

1/2"13.51 mm

1.68"42.7 mm

3224 5/16"8.71 mm

3/8"9.96 mm

1.63"41.3 mm

3293 5/16"8.71 mm

7/16"11.48 mm

1.63"41.3 mm

3247 5/16"8.71 mm

1/2"13.51 mm

1.75"44.5 mm

3292 3/8"9.96 mm

7/16"11.48 mm

1.63"41.3 mm

3138 3/8"9.96 mm

1/2"13.51 mm

1.75"44.5 mm

9138 3/8"9.96 mm

1/2"13.51 mm

1.80"45.7 mm

3307 3/8"9.96 mm

5/8"16.60 mm

1.75"44.5 mm

3294 7/16"11.48 mm

1/2"13.51 mm

1.75"44.5 mm

SPLICERS

A

C

BA

B

A

10 11

SPLI

CERS

WELD

ED BARB ELBO

WS

SKU A (Barb) B (Length) C (Height)

7115 1/8"4.01 mm

1.88"47.6 mm

1.22"31.0 mm

7006 1/4"7.24 mm

1.88"47.8 mm

1.19"30.2 mm

9006 1/4"7.24 mm

1.90"48.3 mm

1.09"27.7 mm

9033 5/16"8.71 mm

2.01"51.1 mm

1.17"29.7 mm

7007 3/8"9.96 mm

1.88"47.8 mm

1.32"33.5 mm

9007 3/8"9.96 mm

2.13"54.0 mm

1.25"31.8 mm

7079 1/2"13.51 mm

2.45"62.3 mm

1.63"41.3 mm

9079 1/2"13.51 mm

2.75"69.9 mm

1.64"41.7 mm

4135 3/4"19.9 mm

2.25"57.2 mm

1.55"39.4 mm

SKU A (Barb) B (Barb) C (Length) D (Height)

7366 1/8"4.01 mm

1/8"4.01 mm

1.20"30.6 mm

1.20"30.6 mm

7014 1/4"7.24 mm

1/4"7.24 mm

1.42"36.1 mm

1.42"36.1 mm

7333 5/16"8.71 mm

3/8"9.96 mm

1.41"35.7 mm

1.44"36.5 mm

7156 3/8"9.96 mm

3/8"9.96 mm

1.44"36.6 mm

1.44"36.6 mm

7249 1/2"13.51 mm

1/2"13.51 mm

1.60"40.6 mm

1.60"40.6 mm


4002 1/4"7.24 mm

1.47"37.3 mm

9002 1/4"7.24 mm

1.47"37.3 mm

4107 5/16"8.71 mm

1.75"44.5 mm

4005 3/8"9.96 mm

1.90"48.3 mm

9005 3/8"9.96 mm

1.90"48.3 mm

4015 1/2"13.51 mm

2.50"63.5 mm

9015 1/2"13.51 mm

2.42"61.5 mm


7130 1/4"7.24 mm

3/8"9.96 mm

1.84"46.8 mm

1.78"45.2 mm

7132 1/4"7.24 mm

1/2"13.51 mm

1.70"43.2 mm

2.00"50.8 mm

7133 3/8"9.96 mm

1/2"13.51 mm

2.45"62.2 mm

2.36"59.9 mm


4076 5/32"4.52 mm

2.00"50.8 mm

4096 3/16"6.35 mm

2.00"50.8 mm

4098 1/4"7.24 mm

2.00"50.8 mm

4048 3/8"9.96 mm

2.00"50.8 mm

4137 1/2"13.51 mm

2.00" 50.8 mm

4138 3/4"19.86 mm

2.25"57.2 mm

SPLICERS - FROM TUBING WELDED BARB ELBOWS

BARBED TEES, Y-TEES AN

D CRO

SSES

SPLICERS - 90° - FROM TUBING

SPLICERS - 90° - REDUCERS

BARB HOSE TEES

D

C

B

A

C

B

A A

A

A

B

A

D

C

A

B

B

12 13


7102 1/8"4.01 mm

1.87"47.5 mm

7010 1/4"7.24 mm

2.30"58.4 mm

9010 1/4"7.24 mm

1.90"48.3 mm

7392 5/16"8.71 mm

2.30" 58.4 mm

7011 3/8"9.96 mm

2.37"60.2 mm

9011 3/8"9.96 mm

2.13"54.0 mm

7081 1/2"13.51 mm

2.48"63.0 mm

SKU A (Barb) B (Barbs) C (Length) D (Height)

7019 3/8"9.96 mm

1/4"7.24 mm

2.27"57.7 mm

2.30"58.4 mm

7180 1/2"13.51 mm

1/4"7.24 mm

2.33"59.2 mm

2.37"60.2 mm


7111 1/4"7.24 mm

3/8"9.96 mm

2.35"59.7 mm

2.35"59.7 mm


7089 1/4"7.24 mm

1/4"7.24 mm

2.22"56.4 mm

1.43"36.3 mm

9089 1/4"7.24 mm

1/4"7.24 mm

2.04"51.8 mm

1.32"33.5 mm

7136 3/8"9.96 mm

3/8"9.96 mm

2.75"69.9 mm

1.63"41.4 mm

9136 3/8"9.96 mm

3/8"9.96 mm

2.64"67.1 mm

1.61"40.9 mm

7266 1/2"13.51 mm

1/2"13.51 mm

3.30"83.8 mm

2.74"69.6 mm

SKU A (Barb) B (Barb) C (Barb) D (Length) E (Height)

7075 1/4"7.24 mm

3/8"9.96 mm

1/4"7.24 mm

2.17"55.1 mm

1.30"33.0 mm


7116 1/4"7.24 mm

1/8"4.01 mm

2.30"58.3 mm

1.22"31.0 mm

7315 1/4"7.24 mm

5/32"4.52 mm

2.25"57.2 mm

1.42"36.1 mm

7008 3/8"9.96 mm

1/4"7.24 mm

1.89"48.0 mm

1.23"31.2 mm

9008 3/8"9.96 mm

1/4"7.24 mm

2.13"54.0 mm

1.20"30.5 mm

7097 1/2"13.51 mm

1/4"7.24 mm

2.45"62.3 mm

1.59"40.5 mm

7080 1/2"13.51 mm

3/8"9.96 mm

2.45"62.3 mm

1.61"40.9 mm

9080 1/2"13.51 mm

3/8"9.96 mm

2.75"69.9 mm

1.64"41.7 mm


7009 1/4"7.24 mm

3/8"9.96 mm

1.89"48.0 mm

1.32"33.5 mm

9009 1/4"7.24 mm

3/8"9.96 mm

1.90"48.3 mm

1.24"31.5 mm

7065 1/4"7.24 mm

1/2"13.51 mm

2.32"58.9 mm

1.45"36.8 mm

7101 3/8"9.96 mm

1/2"13.51 mm

2.37"60.2 mm

1.42"36.1 mm

BARB HOSE TEES - REDUCING

BARB

ED T

EES,

Y-T

EES

AND

CRO

SSES

BARB HOSE CROSS - ENLARGING

BARB HOSE TEES - ENLARGING

BARBED TEES, Y-TEES AN

D CRO

SSES

BARB HOSE CROSSES

BARB HOSE CROSSES - REDUCING

Y-TEES

Y-TEE - REDUCING

D

C

A A

B

D

C

A A

B

BA A

A

A

D

C

B A

D

C

B A

D

C

A A

E

D

B A

B

C

B

B

B

B

14 15


7204 1/2"13.51 mm

1/4"7.24 mm

2.31"58.7 mm

1.47"37.3 mm

7246 1/2"13.51 mm

3/8"9.96 mm

2.30"58.4 mm

1.48"37.6 mm

7394 3/8"9.96 mm

1/4"7.24 mm

1.89"48.0 mm

1.23"31.2 mm


3027 1/4"7.24 mm

1.05"26.7 mm

9027 1/4"7.24 mm

1.05"26.7 mm

3356 5/16"8.71 mm

0.94"23.9 mm

3028 3/8"9.96 mm

1.05"26.7 mm

9028 3/8"9.96 mm

1.05"26.7 mm

3165 1/2"13.51 mm

0.98"24.8 mm

SKU A (Male Flare) B (Length)

3033 1/4" (7/16-20) 0.78"19.7 mm

3032 5/16" (1/2-16) 0.77"19.6 mm

3036 3/8" (5/8-18) 0.87"22.0 mm

SKU A (Threads) B (Length)

3093 1/4" (7/16-20) 0.54"13.7 mm

3094 3/8" (5/8-18) 0.72"18.3 mm


7106 1/4"7.24 mm

2.40"61.0 mm

2.26"57.4 mm

7144 3/8"9.96 mm

3.00"76.2 mm

2.80"71.1 mm


7137 3/8"9.96 mm

1/4"7.24 mm

2.40"61.0 mm

2.26"57.4 mm


7158 1/4"7.24 mm

1/8"4.01 mm

1.90"48.3 mm

2.28"57.9 mm

7197 3/8"9.96 mm

1/4"7.24 mm

2.30"58.4 mm

2.30"58.4 mm


9198 3/8"9.96 mm

1/4"7.24 mm

2.42"61.5 mm

1.48"37.7 mm

BARB

ED T

EES,

Y-T

EES

AND

CRO

SSES

CAPS AND

PLUG

SBARBED PLUGS

SKU A (Barb) B (Barb) C (Barb) Material

9200 3/8"9.96 mm

1/2"13.51 mm

1/4"7.24 mm

FDA Approved Nylon 6

Y-TEE - REDUCER

Y-CROSSES

Y-CROSS - REDUCER

BARB HOSE CROSSES - REDUCING

BARB HOSE TEES - REDUCING

D

C

A

B

B

B

C

B

A

A

A

A

D

C

A A

MALE FLARE PLUGS

CAP NUTS

UNIVERSAL BARB PLUG

A

B

A

B

B

CA

B

D

C

A A

B

D

C

A A

B

B

B

16 17

ADAP

TERS

- TE

ES &

CRO

SSES

SKU A (Barb) B (Female Flare) C (Length) D (Height)

7044 1/4"7.24 mm 1/4" (7/16-20) 1.89"

48.0 mm1.00"

25.4 mm

7082 3/8"9.96 mm 1/4" (7/16-20) 1.89"

48.0 mm1.06"

26.9 mm

7045 3/8"9.96 mm 3/8" (5/8-18) 1.89"

48.0 mm1.29"

32.8 mm

SKU A (Barbs) B (Female Flare) C (Length) D (Height)

7083 1/4"7.24 mm 1/4" (7/16-20) 2.28"

57.9 mm2.10"

53.3 mm

7084 3/8"9.96 mm 3/8" (5/8-18) 2.32"

58.9 mm2.30"

58.4 mm

SKU A (Male Flare)

B (Female Flare)

C (Male Flare)

D (Length)

E (Height)

7070 1/4" (7/16-20) 1/4" (7/16-20) 1/4" (7/16-20) 1.85"47.0 mm

1.13"28.7 mm

7283 1/4" (7/16-20) 3/8" (5/8-18) 1/4" (7/16-20) 1.98"50.3 mm

1.13"28.7 mm

7276 3/8" (5/8-18) 3/8" (5/8-18) 1/4" (7/16-20) 2.28"57.9 mm

1.31"33.3 mm

7270 3/8" (5/8-18) 3/8" (5/8-18) 3/8" (5/8-18) 2.11"53.6 mm

1.31"33.3 mm

SKU Male Flare B (Length)

7027 1/4" (7/16-20) 1.71"43.4 mm

7028 3/8" (5/8-18) 1.98"50.3 mm

SKU A (Barb) B (Male Flare) C (Length) D (Height)

7023 1/4"7.24 mm 1/4" (7/16-20) 2.35"

59.7 mm1.19"

30.2 mm

7025 1/4"7.24 mm 3/8" (5/8-18) 2.35"

59.7 mm1.31"

33.3 mm

7026 3/8"9.96 mm 1/4" (7/16-20) 2.35"

59.7 mm1.19"

30.2 mm

7024 3/8"9.96 mm 3/8" (5/8-18) 2.35"

59.7 mm1.31"

33.3 mm

SKU A (Barbs) B (Male Flare) C (Length) D (Height)

7029 1/4"7.24 mm 1/4" (7/16-20) 2.30"

58.4 mm1.90"

48.3 mm

7031 1/4"7.24 mm 3/8" (5/8-18) 2.30"

58.4 mm 2.12"

53.8 mm

7030 3/8"9.96 mm 1/4" (7/16-20) 2.30"

58.4 mm2.04"

51.8 mm

7032 3/8"9.96 mm 3/8" (5/8-18) 2.30"

58.4 mm2.16"

54.9 mm

SKU A (Male Flares) B (Female Flare) C (Length) D (Height)

7055 1/4" (7/16-20) 1/4" (7/16-20) 1.72"43.7 mm

1.19"30.2 mm

7268 3/8" (5/8-18) 3/8" (5/8-18) 2.00"50.8 mm

1.48"37.6 mm

SKU A (Male Flare) B (Length) C (Height)

7020 1/4" (7/16-20) 1.73"43.9 mm

1.15"29.2 mm

7021 5/16" (1/2-16) 1.84"46.7 mm

1.23"31.2 mm

7022 3/8" (5/8-18) 2.10"53.3 mm

1.33"33.8 mm

ADAPTERS - TEES & CRO

SSESMALE FLARE TEES

MALE FLARE CROSSES

BARB TEES TO MALE FLARE

BARB CROSSES TO MALE FLARE

FEMALE FLARE TO MALE FLARE TEES

FEMALE FLARE TO MALE FLARES

BARB TEES TO FEMALE FLARE

BARB CROSSES TO FEMALE FLARE

D

C

AA

B

C

B

A A

A

B

A A

A

D

C

A A

A

A

D

C

A A

B

E

D

B A

C

D

C

A A

B

D

C

A A

A

18 19

SKU A (Barbs) B (Female Flare) C (Length) D (Height)

7046 1/4"7.24 mm 1/4" (7/16-20) 2.10"

53.3 mm1.42"

36.1 mm

7047 3/8"9.96 mm 3/8" (7/16-20) 2.30"

58.4 mm1.50"

38.1 mm

SKU A (Barb) B (NPT) C (Length) D (Height)

7182 1/4"7.24 mm 1/4" 2.36"

59.9 mm1.37"

34.8 mm

7181 1/4"7.24 mm 3/8" 2.40"

61.0 mm1.40"

35.6 mm

7185 3/8"9.96 mm 1/4" 2.33"

59.2 mm1.39"

35.3 mm

7171 3/8"9.96 mm 3/8" 2.31"

58.7 mm1.42"

36.1 mm

7189 3/8"9.96 mm 1/2" 1.99"

50.5 mm1.68"

42.7 mm

7305 1/2"13.51 mm 3/8" 2.41"

61.2 mm1.90"

48.3 mm

7168 1/2"13.51 mm 1/2" 2.46"

62.5 mm2.00"

50.8 mm

7169 1/2"13.51 mm 3/4" 2.44"

62.0 mm2.12"

53.8 mm

SKU A (Male Flares) B (NPT Tee) C (Length) D (Height)

7393 1/4" (7/16-20) 1/8" 1.70"43.2 mm

1.10"27.9 mm

7164 3/8" (5/8-18) 3/8" 1.96"49.8 mm

1.82"46.2 mm

7161 3/8" (5/8-18) 1/2" 1.96"49.8 mm

1.87"47.5 mm

7172 3/8" (5/8-18) 3/4" 1.96"49.8 mm

1.92"48.8 mm

ADAP

TERS

- TE

ES &

CRO

SSES

BARB TEES TO NPT

FEMALE FLARE TO BARB TEES

MALE FLARE TEES TO NPT

SKU A (Barb) B (Male NPT) C (Length) D (Height)

7348 3/8"9.96 mm 1/2" - 14 2.26"

57.40 mm1.48"

37.60 mm

BARB TEE TO NPT

SKU A (Male Flare) B (Barb) C (Length)

3015 1/4" (7/16-20) 1/4"7.24 mm

1.51"38.4 mm

3017 1/4" (7/16-20) 3/8"9.96 mm

1.51"38.4 mm

7244 1/4" (7/16-20) 1/2"13.51 mm

1.86"47.2 mm

3016 5/16" (1/2-16) 1/4"7.24 mm

1.51"38.4 mm

3018 5/16" (1/2-16) 3/8"9.96 mm

1.51"38.4 mm

3080 3/8" (5/8-18) 1/4"7.24 mm

1.64"41.5 mm

3081 3/8" (5/8-18) 3/8"9.96 mm

1.64"41.5 mm

7364 3/8" (5/8-18) 1/2"13.51 mm

1.70"43.3 mm

SKU A (Barb) B (Female Flare) C (Length) D (Height)

7198 1/8"4.01 mm 1/4" (7/16-20) 1.20"

30.6 mm1.25"

31.8 mm

7052 1/4"7.24 mm 1/4" (7/16-20) 1.42"

36.1 mm1.16"

29.5 mm

7053 3/8"9.96 mm 1/4" (7/16-20) 1.44"

36.6 mm1.16"

29.5 mm

7146 1/4"7.24 mm 3/8" (5/8-18) 1.50"

38.1 mm1.47"

37.3 mm

7054 3/8"9.96 mm 3/8" (5/8-18) 1.52"

38.6 mm1.49"

37.8 mm

ADAPTERS - STRAIGH

T & ELBO

WS

BARB TO MALE FLARE

FEMALE FLARE TO BARB - ELBOWS - WELDED

SKU A (Barb) B (Female NPT) C (Length) D (Height)

7303 3/8"9.96 mm 1/8" - 27 2.50"

63.5 mm0.78"

19.7 mm

7304 1/4"7.24 mm 1/8" - 27 2.33"

59.18 mm0.78"

19.70 mm

7440 3/8"9.96 mm 1/4" - 18 2.45"

62.2 mm0.95"

24.1 mm

BARB TEES TO FEMALE NPT

D

C

B A

A

D

C

A A

B

D

C

A A

B

D

C

A B

D

C

A

B

D

C

A A

B

B

C

A

20 21

SKU A (NPT) B (Barb) C (Length) D (Height)

7307 1/8" 1/8"4.01 mm

1.23"31.2 mm

1.07"27.2 mm

7380 1/8" 5/16"8.71 mm

1.41"35.8 mm

1.06"26.9 mm

7219 1/8" 1/4"7.24 mm

1.41"35.8 mm

1.07"27.2 mm

7223 1/8" 3/8"9.96 mm

1.45"36.9 mm

1.07"27.2 mm

7184 1/4" 1/4"7.24 mm

1.48"37.7 mm

1.38"34.9 mm

7162 1/4" 3/8"9.96 mm

1.48"37.7 mm

1.41"35.7 mm

SKU A (NPT) B (Barb) C (Length) D (Height)

7297 1/8" 1/4"7.24 mm

1.50"38.1 mm

1.97"50.0 mm

7296 1/8" 3/8"9.96 mm

1.86"47.2 mm

1.95"49.6 mm

7299 1/4" 1/4"7.24 mm

1.50"38.1 mm

1.97"50.0 mm

7298 1/4" 3/8"9.96 mm

1.70"43.2 mm

2.18"55.4 mm

7503 3/8" 1/2"13.51 mm

2.27"57.50 mm

2.38"60.50 mm

7190 3/8" 1/4"7.24 mm

1.45"36.8 mm

1.95"49.5 mm

7166 3/8" 3/8"9.96 mm

1.97"50.0 mm

2.31"58.7 mm

7506 1/4" 1/2"13.51 mm

2.27"57.50 mm

2.38"60.5 mm

7175 1/2" 3/8"9.96 mm

2.11"53.6 mm

2.36"59.9 mm

7186 1/2" 1/2"13.51 mm

2.44"61.9 mm

2.56"65.1 mm

7188 3/4" 3/8"9.96 mm

2.32"58.9 mm

2.38"60.5 mm

7215 3/4" 1/2"13.51 mm

2.25"57.2 mm

2.63"66.7 mm

SKU A (NPT) B (Barb) C (Length)

7261 1/8" 5/32"4.52 mm

1.41"35.8 mm

3273 1/8" 1/4"7.24 mm

1.33"33.8 mm

3278 1/8" 3/8"9.96 mm

1.36"34.5 mm

7516 1/4" 3/16"6.35 mm

1.59"40.4 mm

3242 1/4" 1/4"7.24 mm

1.56"39.6 mm

3243 1/4" 3/8"9.96 mm

1.56"39.6 mm

3378 1/4" 1/2"13.51 mm

1.57"39.9 mm

3240 3/8" 1/4"7.24 mm

1.51"38.4 mm

3241 3/8" 3/8"9.96 mm

1.56"39.6 mm

3297 3/8" 1/2"13.51 mm

1.64"41.6 mm

3239 1/2" 3/8"9.96 mm

1.66"42.2 mm

3216 1/2" 1/2"13.51 mm

1.66"42.2 mm

7262 3/4" 3/8"9.96 mm

1.97"50.0 mm

7170 3/4" 1/2"13.51 mm

1.70"43.2 mm

3367 3/4" 3/4"19.86 mm

1.70"43.2 mm

SKU A (Barb) B (Female Pipe Thread) C (Length)

3314 1/2"13.51 mm 3/4" 1.89"

48.0 mm

ADAP

TERS

- ST

RAIG

HT

& E

LBO

WS BARB TO NPT

ADAPTERS - STRAIGH

T & ELBO

WS

BARB TO NPT - ELBOWS

BARB TO FEMALE NPT

BARB TO NPT - ELBOWS - SWEEP

B

C

A

D

C

B

A

D

C

B

A

B

C

A

22 23

SKU A (NPT) B (Male Flare) C (Length) D (Height)

7300 1/8" 1/4" (7/16-20) 1.07"27.2 mm

1.12"28.4 mm

7183 1/4" 1/4" (7/16-20) 1.38"35.1 mm

1.18"30.0 mm

7515 1/4" 3/8" (5/8-18) 1.36"34.50 mm

1.36"34.50 mm

7284 3/8" 1/4" (7/16-20) 1.45"36.8 mm

1.20"30.5 mm

7165 3/8" 3/8" (5/8-18) 1.41"35.8 mm

1.38"35.1 mm

7239 1/2" 3/8" (5/8-18) 1.45"36.8 mm

1.30"33.0 mm

SKU A (Male Flare) B (Male Flare) C (Length)

3001 1/4" (7/16-20) 1/4" (7/16-20) 1.31"33.4 mm

3002 1/4" (7/16-20) 5/16" (1/2-16) 1.31"33.4 mm

3005 1/4" (7/16-20) 3/8" (5/8-18) 1.44"36.5 mm

3003 5/16" (1/2-16) 5/16" (1/2-16) 1.31"33.4 mm

3004 3/8" (5/8-18) 3/8" (5/8-18) 1.50"38.1 mm

SKU A (NPT) B (NPT) C (Length)

7391 1/8" 1/4" 1.28"32.5 mm

3246 1/4" 1/4" 1.50"38.1 mm

7343 3/8" 1/2" 1.62"41.1 mm

SKU A (Female Pipe Thread) B (NPT) C (Length)

3313 1/4" 1/2" 0.87"22.1 mm

3311 3/8" 3/4" 1.01"25.7 mm

3312 1/2" 3/4" 1.01"25.7 mm

SKU A (NPT) B (Length) C (Height)

7290 1/4" 1.35"34.3 mm

1.35"34.3 mm

SKU A (NPT) B (Male Flare) C (Length)

3290 1/8" 1/4" (7/16-20) 1.31"33.3 mm

7370 1/8" 3/8" (5/8-18) 1.51"38.4 mm

3238 1/4" 1/4" (7/16-20) 1.32"33.5 mm

3244 1/4" 3/8" (5/8-18) 1.50"38.0 mm

7254 3/8" 1/4" (7/16-20) 1.44"36.5 mm

3231 3/8" 3/8" (5/8-18) 1.41"35.8 mm

7282 3/8" 5/16" (1/2-16) 1.42"36.1 mm

7234 1/2" 3/8" (5/8-18) 1.61"40.9 mm

3327 1/2" 1/2" (3/4-16) 1.64"41.7 mm

7334 3/4" 3/8" (5/8-18) 1.68"42.7 mmAD

APTE

RS -

STRA

IGH

T &

ELB

OW

S ADAPTERS - STRAIGH

T & ELBO

WS

NPT TO MALE FLARE

NPT TO NPT

NPT TO NPT - ELBOW

NPT REDUCING BUSHINGS

NPT TO MALE FLARE - ELBOWS

MALE FLARE TO MALE FLARE

A

C

B

C

B

A

A

B

C

A

B

C

A

D

C

A

B

A

C

B

24 25

SKU A (Female Flares) B (Length) C (Height)

7056 1/4" (7/16-20) 1.20"30.5 mm

1.20"30.5 mm

7295 3/8" (5/8-18) 1.49"37.8 mm

1.49"37.8 mm

SKU A (Barb) B (Female Flare) C (Length)

3091 3/8"9.96 mm 1/4" (7/16-20) 1.26"

32.0 mm

SKU A (Female Flare) B (Female Flare) C (Length)

3082 1/4" (7/16-20) 3/8" (5/8-18) 1.05"26.6 mm

SKU A (Longer Thread) B (Shorter Thread) C (Length)

3249 1/4" (7/16-20) 1/4" (7/16-20) 1.59"40.3 mm

SKU Female Flare Material

1026 1/4" (7/16-20) Nickel-Plated BrassADAP

TERS

- ST

RAIG

HT

& E

LBO

WS BULKHEAD ADAPTERS

SKU A (Barb) B (Thread) C (Length)

3305 1/4"7.24 mm 1/4" (7/16-20) 2.10"

53.3 mm

3306 3/8"9.96 mm 1/4" (7/16-20) 2.10"

53.3 mm

ADAPTERS - STRAIGH

T & ELBO

WS

SKU A (Male Flare) B (Barb) C (Length) D (Height)

7438 3/8"9.96 mm

3/8"9.96 mm

2.82"71.6 mm

1.92"48.80 mm

BULKHEAD ADAPTER - SPANNER NUT

BARB TO FEMALE FLARE

FEMALE FLARE TO FEMALE FLARE - ELBOWS

FEMALE FLARE TO MALE FLARE

BARB TO MALE FLARE - ELBOW - SWEEP

SKU A (NPT) B (Male Flare) C (Length) Material

1066 1/8" 1/4" (7/16 -20) 1.07"27.2 mm Brass

1068 1/4" 1/4" (7/16 -20) 1.25"37.5 mm Brass

NPT TO MALE FLARE

FEMALE FLARE TO MALE FLARE - ELBOWS

SKU A (Female Flare) B (Male Flare) C (Length) D (Height)

7098 1/4" (7/16-20) 1/4" (7/16-20) 1.13"28.6 mm

1.27"32.1 mm

7373 3/8" (5/8-18) 3/8" (5/8-18) 1.30"33.0 mm

1.50"38.1 mm

CHECK VALVES FO

R SODA

SKU A (NPT) B (Barb) C (Length) Material

1067 1/8" 1/4"7.24 mm

1.27"32.1 mm Brass

NPT TO BARB

A

C

B

B

C

A

A

C

B

D

C

A

B

B

C

A

B

C

A

B

C

A

C

B

A

D

C

A

B

A

26 27

SKU A (Barbs) B (Barb) C (Length) D (Height)

7157 1/4"7.24 mm

1/8"4.01 mm

2.66"67.6 mm

1.48"37.6 mm

7051 1/4"7.24 mm

1/4"7.24 mm

2.70"68.6 mm

1.55"39.4 mm

9051 1/4"7.24 mm

1/4"7.24 mm

2.70"68.6 mm

1.55"39.4 mm

7126 1/4"7.24 mm

3/8"9.96 mm

2.84"72.1 mm

1.48"37.6 mm

7374 1/4"7.24 mm

1/2"12.70 mm

3.14"79.80 mm

1.48"37.6 mm

9035 5/16"8.71 mm

5/16"8.71 mm

2.92"74.2 mm

1.57"39.9 mm

7094 3/8"9.96 mm

1/4"7.24 mm

3.09"78.5 mm

1.59"40.4 mm

9094 3/8"9.96 mm

1/4"7.24 mm

3.19"81.0 mm

1.53"38.9 mm

7071 3/8"9.96 mm

1/4"7.24 mm

3.65"92.7 mm

2.67"67.8 mm

7095 3/8"9.96 mm

3/8"9.96 mm

3.65"92.7 mm

1.53"38.9 mm

9095 3/8"9.96 mm

3/8"9.96 mm

3.19"81.0 mm

1.53"38.9 mm

7063 3/8"9.96 mm

3/8"9.96 mm

3.73"94.7 mm

2.67"67.8 mm

7143 3/8"9.96 mm

1/2"13.51 mm

3.78"96.0 mm

2.67"67.8 mm

7159 1/2"13.51 mm

1/4"7.24 mm

3.95"100.3 mm

2.65"67.3 mm

7067 1/2"13.51 mm

3/8"9.96 mm

3.95"100.3 mm

2.65"67.3 mm

7066 1/2"13.51 mm

1/2"13.51 mm

3.89"98.8 mm

2.65"67.3 mm


7252 1/2"13.51 mm

3/8"9.96 mm

2.80"71.1 mm

2.84"72.1 mm


4014 1/4"7.24 mm

1.80"45.7 mm

1.48"37.6 mm

9014 1/4"7.24 mm

1.80"45.7 mm

1.48"37.6 mm

4108 5/16"8.71 mm

2.08"52.8 mm

1.75"44.4 mm

4019 3/8"9.96 mm

2.25"57.2 mm

1.53"38.9 mm

9019 3/8"9.96 mm

2.25"57.2 mm

1.53"38.9 mm

9099 3/8"9.96 mm

2.10"53.3 mm

1.84"46.7 mm

4009 3/8"9.96 mm

2.84"72.1 mm

2.67"67.8 mm

4017 1/2"13.51 mm

3.06"77.8 mm

2.65"67.3 mm

9017 1/2"13.51 mm

3.06"77.8 mm

2.65"67.3 mm

U-BEN

DS M

ANIFO

LDS

U-BEND MANIFOLDS - SINGLE BARB

U-B

END

S U-BENDS

U-BEND - REDUCING

D

C

B

A

C

B

A

A

D

C

A

A

B

28 29

SKU A(Barbs)

B(# Outlets)

C(Outlet Size)

D(Length)

E (Height)

9199 3/8"9.96 mm 3

3/8"9.96 mm

4.44"112.7 mm

3.53"89.7 mm

7139 1/2"13.51 mm 2 1/4"

7.24 mm3.79"

96.3 mm3.82"

97.0 mm

7140 1/2"13.51 mm 3 1/4"

7.24 mm4.25"

108.0 mm3.82"

97.0 mm

7336 1/2"13.51 mm 4 1/4"

7.24 mm3.79"

96.3 mm3.82"

97.0 mm

7154 1/2"13.51 mm 5 1/4"

7.24 mm4.25"

108.0 mm3.82"

97.0 mm

7376 1/2"13.51 mm 2 3/8"

9.96 mm4.00"

101.6 mm3.82"

97.0 mm

7291 1/2"13.51 mm 3 3/8"

9.96 mm4.25"

108.0 mm3.82"

97.0 mm

7306 1/2"13.51 mm 4 3/8"

9.96 mm4.00"

101.6 mm3.82"

97.0 mm

SKU A (Barb) B (Male Flare) C (Length) D (Height)

7155 1/4"7.24 mm 1/4" (7/16-20) 2.75"

69.9 mm1.48"

37.6 mm

7127 3/8"9.96 mm 1/4" (7/16-20) 3.14"

79.8 mm1.53"

38.9 mm

7085 3/8"9.96 mm 1/4" (7/16-20) 3.80"

96.5 mm2.67"

67.8 mm

7076 1/2"13.51 mm 1/4" (7/16-20) 4.29"

109.0 mm3.82"

97.0 mm

7346 1/2"13.51 mm 3/8" (5/8-18) 3.84"

97.5 mm2.65"

67.3 mm

SKU A (Barbs) B (Barb) C (Length) D (Height)

7142 3/8"9.96 mm

1/4"7.24 mm

2.25"57.2 mm

1.53"38.9 mm

SKU A (Barb) B (NPT) C (Length) D (Height)

7260 3/8"9.96 mm 1/4" (7/16-20) 3.44"

87.4 mm1.53"

38.9 mm

SKU A (Barb)

B (# Outlets)

C (Male Flares)

D (Length)

E (Height)

7086 3/8"9.96 mm 3 1/4" (7/16-20) 3.80"

96.5 mm2.67"

67.8 mm

7104 3/8"9.96 mm 4 1/4" (7/16-20) 3.60"

91.4 mm2.67"

67.8 mm

7087 3/8"9.96 mm 5 1/4" (7/16-20) 3.80"

96.5 mm2.67"

67.8 mm

7077 1/2"13.51 mm 3 1/4" (7/16-20) 4.30"

109.2 mm3.82"

97.0 mm

7078 1/2"13.51 mm 5 1/4" (7/16-20) 4.30"

109.2 mm3.82"

97.0 mm

U-BEN

DS M

ANIFO

LDSU

-BEN

DS

MAN

IFO

LDS U-BENDS MANIFOLDS - MULTI-BARBED

U-BENDS MANIFOLDS - SINGLE MALE FLARE

U-BEND MANIFOLDS - MALE FLARE

U-BEND MANIFOLD - WITH SIDE OUTLET

U-BEND MANIFOLD - NPT

E

D

A

A

D

C

A

A

B

E

D

A

AC

C

C

B

D

C

A

A

B

D

C

A

A

B

C

C

C

B

30 31

SKU A (Barb) B (Nut) C (Length) D (Height)

7099 3/16"6.35 mm 1/4" (7/16-20) 1.50"

38.1 mm1.50"

38.1 mm

7013 1/4"7.24 mm 1/4" (7/16-20) 1.50"

38.1 mm1.60"

40.6 mm

7153 1/4"7.24 mm 5/16" (1/2-16) 1.50"

38.1 mm1.65"

41.9 mm

7059 1/4"7.24 mm 3/8" (5/8-18) 1.50"

38.1 mm1.90"

48.2 mm

7073 3/8"9.96 mm 1/4" (7/16-20) 1.95"

49.5 mm2.03"

51.6 mm

7327 3/8"9.96 mm 5/16" (1/2-16) 1.95"

49.5 mm2.03"

51.6 mm

7018 3/8"9.96 mm 3/8" (5/8-18) 2.06"

52.3 mm2.06"

52.3 mm

7495 3/8"9.96 mm 1/2" (3/4-16) 2.81"

71.40 mm3.08"

78.30 mm

7281 1/2"13.51 mm 3/8" (5/8-18) 2.53"

64.3 mm2.63"

66.7 mm

7191 1/2"13.51 mm 1/2" (3/4-16) 2.53"

64.3 mm2.50"

63.5 mm


7015 1/4"7.24 mm 1/4" (7/16-20) 2.86"

72.6 mm2.70"

68.6 mm

SKU A (Barb) B (Nut) C (Length)

7058 3/8"9.96 mm 1/4" (7/16-20) 1.39"

35.3 mm

7114 1/2"13.51 mm 3/8" (5/8-18) 1.63"

41.4 mm

7471 1/2"13.51 mm 1/4" (3/4-16) 1.54"

39.10 mm

7232 1/2"13.51 mm 1/2" (3/4-16) 1.80"

45.7 mm

SKUA

(Tube Barbs) B

(Barb Outlets)B

(# of Outlets)C

(Length)

7218-1 3/8"9.96 mm

5/32"4.52 mm 2 3.50"

88.9 mm

7218-3 3/8"9.96 mm

5/32"4.52 mm 3 4.50"

114.3 mm

7218-5 3/8"9.96 mm

5/32"4.52 mm 4 5.50"

139.7 mm

7378 3/8"9.96 mm

1/4"7.24 mm 4 5.50"

139.7 mm

7406 3/8"9.96 mm

3/8"9.96 mm 4 5.50"

139.7 mm

7354 3/8"9.96 mm

3/8"9.96 mm 6 7.50"

139.7 mm

SKU A(Male Flare)

B (Male Flares)

B (# of Outlets)

C (Length)

7017 1/4" (7/16-20) 1/4" (7/16-20) 7 8.50"215.9 mm

7016 1/4" (7/16-20) 1/4" (7/16-20) 5 8.50"215.9 mm

7050 3/8" (5/8-18) 1/4" (7/16-20) 7 8.65"219.7 mm

SKU A (Male Flares)

B (Barbs)

B(# of Outlets)

C (Length)

7151 1/4" (7/16-20) 3/16"6.35 mm 5 8.00"

203.2 mm

7152 1/4" (7/16-20) 3/16"6.35 mm 4 8.00"

203.2 mm

BARB

ED M

ANIF

OLD

S MANIFOLDS - STRAIGHT - MALE FLARE

SWIVELS

SWIVELS - STRAIGHT


7194 1/4"7.24 mm 1/4" (7/16-20) 2.44"

62.0 mm1.04"

26.4 mm

MANIFOLDS - STRAIGHT - BARBED/FLARED

MANIFOLDS - STRAIGHT - BARBED

SWIVEL - 45°

SWIVELS - ELBOWS

SWIVEL - U-BEND

SWIV

ELS

D

C

B

A

B

A

C

A

B B

A

C

A

B

A

C

A

B

B B B B

B

B BB B B

A

C

B

D

C

A

B

D

C

A

B

32 33

SKU A (NPT) B (Length)

7253 1/4" 1.56"39.7 mm


3101 1/4"7.24 mm

1.92"48.8 mm

0.78"19.8 mm

7090 3/8"9.96 mm

2.39"60.7 mm

1.77"45.0 mm

7092 1/2"13.51 mm

2.58"65.5 mm

1.10"27.9 mm


7245 1/4"7.24 mm

1.30"33.0 mm

7236 3/8"9.96 mm

1.30"33.0 mm


3038 1/4"7.24 mm

1.15"29.1 mm

3079 1/4"7.24 mm

1.95"49.5 mm

3040 5/16"8.71 mm

1.15"29.2 mm

3309 3/8"9.96 mm

1.21"30.7 mm

3056 3/8"9.96 mm

1.49"37.8 mm

7062 3/8"9.96 mm

2.68"68.1 mm

7091 1/2"13.51 mm

2.75"69.9 mm


7309 5/32"4.52 mm

1.00"25.4 mm

1.03"26.2 mm

3055 1/4"7.24 mm

1.35"34.3 mm

1.15"29.2 mm

7068 3/8"9.96 mm

2.07"52.6 mm

1.12"28.4 mm

7192 3/8"9.96 mm

3.13"79.5 mm

1.24"31.5 mm

7093 1/2"13.51 mm

2.14"54.4 mm

1.34"34.0 mm


7112 1/4"7.24 mm

1.40"35.6 mm

1.54"39.1 mm

9112 1/4"7.24 mm

1.50"38.1 mm

1.45"36.8 mm

7113 3/8"9.96 mm

2.12"53.8 mm

1.63"41.4 mm

9113 3/8"9.96 mm

2.06"52.3 mm

1.55"39.4 mm

7470 1/2"13.51 mm

2.91"73.8 mm

2.91"73.80 mm


7273 3/8"9.96 mm

1.48"37.6 mm

1.94"49.3 mm

7277 1/2"13.51 mm

1.42"36.1 mm

1.94"49.3 mm

VALV

ES &

PU

MPS

VALVES & PU

MPS

WUNDER-BAR INLETS - STRAIGHT

WUNDER-BAR INLETS - 90°

WUNDER-BAR INLETS - 45°

SHURFLO INLETS - STRAIGHT

C

B

A

SHURFLO QUICK CONNECT - ELBOWS

SHURFLO INLETS - 90°

SHURFLO INLET (NPT) - STRAIGHT

A

B

C

B

A

A

B

A

B

C

B

A

C

B

A

34 35

VALV

ES &

PU

MPS

SKU A (Barb) B (Inlet) C (Length) D (Height)

7108 1/4"7.24 mm General Beverage 1.42"

36.1 mm1.27"

32.1 mm

7128 1/4"7.24 mm Dole 1.42"

36.1 mm1.27"

32.1 mm


52.3 mm1.44"

36.6 mm

7238 3/8"9.96 mm Dole 2.06"

52.3 mm1.44"

36.6 mm


55.1 mm1.44"

36.6 mm

SKU A (Barb) B (Inlet) C (Length)

7379 1/8"4.01 mm Dole 1.28"

32.5 mm


34.8 mm

3236 1/4"7.24 mm Dole 1.28"

32.5 mm

SKU A (Barb) B (Inlet) C (Length) D (Height)


47.2 mm0.86"

21.8 mm

7129 1/4"7.24 mm Dole 1.86"

47.2 mm0.86"

21.8 mm


3144 1/4"7.24 mm

1.18"30.0 mm

3143 3/8"9.96 mm

1.28"32.5 mm

3145 1/2"13.51 mm

1.42"36.1 mm


7096 1/4"7.24 mm

1.70"43.2 mm

1.60"40.6 mm

7100 3/8"9.96 mm

2.07"52.6 mm

1.77"45.0 mm

7120 1/2"13.51 mm

2.27"57.7 mm

2.05"52.1 mm


7049 1/4"7.24 mm

1.73"44.1 mm

1.61"40.9 mm

7048 3/8"9.96 mm

1.91"48.4 mm

1.77"44.8 mm

7064 1/2"13.51 mm

2.33"59.1 mm

2.39"60.7 mm

SKU A (Barb) B (Inlet) C (Length)


31.8 mm

3046 1/4"7.24 mm Dole 1.26"

31.9 mm


31.6 mm


38.9 mm

7328 3/8"9.96 mm Dole 1.53"

38.9 mm

VALVES & PU

MPS

VALVE INLETS - STRAIGHT - SINGLE O-RING


3380 1/4"7.24 mm

1.60"40.6 mm

3325 3/8"9.96 mm

1.60"40.6 mm

3323 1/2"13.51 mm

1.61"40.9 mm

FLOJET INLETS - STRAIGHT

C

B

A

C

B

A

FLOJET INLETS - 90°

FLOJET INLETS - 90° - DOUBLE O-RING

FLOJET INLETS - STRAIGHT - QUAD PORT VALVE INLETS - 90° - DOUBLE O-RING

VALVE INLETS - 45° - DOUBLE O-RING

VALVE INLETS - STRAIGHT - DOUBLE O-RING

A

C

B

A

B

A

C

B

A

C

B

D

C

A

D

C

A

B

B

36 37

SKU A (Thread) Material

1020 7/8"-14 (5/8" BSP) Nickel-Plated Brass

3340 7/8"-14 (5/8" BSP) 304 Stainless Steel

BEER BEER NUTS

BEERBEER STEM - ELBOWS

SKU A (Barb) B (Length) C (Height) Material

4152 3/16"6.35 mm

1.63"41.4 mm

1.14"29.0 mm 304 Stainless Steel

4103 1/4"7.24 mm

1.88"47.8 mm


4153 5/16"8.71 mm

1.70"43.2 mm


4131 3/8"9.96 mm

1.78"45.2 mm


SKU A (Barb) B (Length) Material

1072 5/16" 1.11" Nickel-Plated Brass

BEER GAS NIPPLE


1011 1/4"7.24 mm

0.87"22.1 mm Nickel-Plated Brass

1012 5/16"8.71 mm


1013 3/8"9.96 mm


1014 7/16"11.48 mm


1015 1/2"13.51 mm


NICKEL PLATED BEER STEMS


3337 3/16"6.35 mm


3259 5/32"4.52 mm


3205 1/4"7.24 mm


3206 5/16"8.71 mm


3207 3/8"9.96 mm


3357 7/16"11.48 mm


3285 1/2"13.51 mm


303 STAINLESS STEEL BEER STEMS


4102 1/4"7.24 mm


4114 5/16"8.71 mm


4115 3/8"9.96 mm


304 STAINLESS STEEL BEER STEMS

SKU Thread Type

8016 7/8"-14 (5/8" BSP)

SKU Thread Width Height Material

8054 7/8"-14(5/8" BSP)

2.15"54.6 mm

0.59"15.0 mm

Nickel-Plated brass, molded nylon

BEER WING NUT

BEER WASHER

SKU A (Male Flare) B (Length) Material

7269 1/4" (7/16-20) 1.23"31.2 mm Stainless Steel

BEER STEM - MALE FLARE

A

B

A

B

A

B

A

A

B

A

B

C

B

A

38 39

BEERBeer

SKU A (Threads) B (Threads) C (Length) D (Height)

7512 29/32"-14 29/32"-14 2.70"68.6 mm

2.62"66.5 mm

SKU A (Threads) B (Threads) C (Length) D (Height)

7513 7/8"-14(5/8" BSP)

7/8"-14(5/8" BSP)

2.39"60.7 mm

3.95"100.3 mm

SKU Threads A (# of Outlets) B (Length)

7476 7/8" - 14(5/8" BSP) 8 9.50"

241.3 mm

SKU Threads A (# of Outlets) B (Length)

7477 7/8"-14(5/8" BSP) 6 3.13"

79.5 mm

BEER STAINLESS BEER NUT TO BEER THREAD - "Y" FITTING

STAINLESS WALL BRACKET - BEER THREAD - "Y" FITTING

STAINLESS 6-WAY BEER CLEANING MANIFOLD - STAR

STAINLESS 8-WAY BEER CLEANING MANIFOLD - STRAIGHT

STAINLESS WALL BRACKET – BEER THREAD TO BARB

SKU A (Male Thread) B (Barb) C (Length) D (Height)

9404 7/8"-14(5/8" BSP)

3/8"9.96 mm

2.50"63.5 mm

3.00"76.20 mm


9406 3/8"9.96 mm

2.30"58.4 mm

2.75"69.9 mm

SKU A (Male Thread) B (Length) C (Height)

9403 7/8"-14(5/8" BSP)

2.39"60.7 mm

3.00"76.2 mm


4119 3/8"9.96 mm

1.68"42.7 mm

2.00"50.8 mm

STAINLESS WALL BRACKET – BEER THREAD

STAINLESS WALL BRACKET - STRAIGHT SPLICER

STAINLESS WALL BRACKET - 45° SPLICER

A

B

A

A

A

D

C

A

B

CB

B

D

AA A

A

C

B

A A

A AB

C

B

A A

A AB

C

B

A A

AAB

C

B

A A

AAB

A

B

A

A A A

A A A

40 41

BEER

SKU A (Threads) B (Barb) C (Length)

7472-1 7/8"-14(5/8" BSP)

1/2" (one)13.51 mm

5.66"143.8 mm

7472-3 7/8"-14(5/8" BSP)

1/2" (two)13.51 mm

6.50"165.1 mm


7491-1 7/8"-14(5/8" BSP)

1/2" (one)13.51 mm

8.66"220.0 mm

7491-3 7/8"-14(5/8" BSP)

1/2" (two)13.51 mm

9.50"241.3 mm


7492-1 7/8"-14(5/8" BSP)

1/2" (one)13.51 mm

11.66"292.2 mm

7492-3 7/8"-14(5/8" BSP)

1/2" (two)13.51 mm

12.50"317.5 mm

SKU A (Barb) B (Length) C (Height) Material

1056 3/8"9.96 mm

1.77"45.0 mm


9156 3/8"9.96 mm

1.77"45.0 mm

0.49"12.4 mm Stainless Steel

STAINLESS 2-WAY BEER MANIFOLDS - STRAIGHT

JUG GROWLER FILLERS



BEER

C

B

A

SKU A (Quick Disconnect Size) B (Length) Material

7294 3/8" 1.44"36.5 mm Stainless Steel

SKU A (Threads) B (Threads) C (Length) D (Height) Material

7475 7/8"-14(5/8" BSP)

7/8"-14(5/8" BSP)

2.42"61.5 mm

2.19"55.6 mm

Stainlesssteel D

C A

SKU A (NPT) B (Male Flare) C (Length) Material

1073 1/8" 1/4" (7/16-20) 1.07"27.1 mm Brass

1074 1/4" 1/4" (7/16-20) 1.25"31.0 mm Brass

BEER STEM - QUICK DISCONNECT

BEER NUT TO BEER THREAD - ELBOW

BRASS CHECK VALVES FOR BEER

SKU Thread A (Width) B (Height) Material

3389 7/8"-14(5/8" BSP)

1.00"25.40 mm

0.57"14.5 mm Stainless Steel

BEER CAP NUT

A

C

B

A

B

A

B

B

C

A

B

C

B

A A

A

C

BA

B

C

BA A AA

A

C

B B

C

BA A A A A A A

42 43

MISCELLAN

EOU

S

SKU Thread

4016 10-24 Thread

SKU Size Color

8001 1/4" x (.070) black

8015 1/4" x (.070) red

8002 5/16" x (.070) black

8003 3/8" x (.070) black

8010 3/8" x (.103) black

8031 7/16" x (.103) black

8035 3/4" x (.070) black

KNURLED CAP NUT

O-RINGS - EPDM 70 - NSF 61

BEER

A

SKU Description A (Length)

9400 Stainless Steel Lever 2.35"59.7 mm


4031 3/16"6.35 mm

1.63"41.3 mm

1.25"31.8 mm

4008 1/4"7.24 mm

1.31"33.3 mm

1.31"33.3 mm

4041 3/8"9.96 mm

1.91"48.4 mm

1.91"48.4 mm

4090 1/2"13.51 mm

2.50"63.5 mm

1.91"48.4 mm

SKU A (Length) B (Width) C (Height) Material

4124 19.88"504.8 mm

9.00"228.6 mm

5.06"128.6 mm

Stainlesssteel

BARB ELBOWS TO SMOOTH FINISH - 90°


4121 3/16"6.35 mm

1.87"47.5 mm

2.50"63.5 mm

FAUCET LEVER

COLD PLATE RACK FOR JOCKEY BOX

BARB ELBOW TO SMOOTH FINISH - 45°

C

B

A

C

B

A

A

B C

44 45

SKU A (Female Flare) B (Male Flare) C (Length)

7288 1/4" (7/16-20) 1/4" (7/16-20) 1.97"50.0 mm

7289 3/8" (5/8-18) 1/4" (7/16-20) 1.86"47.2 mm

FEMALE FLARE TO MALE FLARE COMPRESSION

COM

PRES

SIO

N

B

C

A

B

C

A

QU

ICK DISCO

NN

ECT ADAPTERSSKU A (Tube) B (Barb) C (Length) D (Height)

7332 3/8" 3/8"9.96 mm

1.42"36.1 mm

1.50"38.1 mm

SKU A (Tube) B (Barb) C (Length)

7217 1/4" 1/4"7.24 mm

1.67"42.5 mm

7212 3/8" 1/4"7.24 mm

1.67"42.5 mm

7216 3/8" 3/8"9.96 mm

1.67"42.5 mm

7259 3/8" 1/2"13.51 mm

1.87"47.5 mm

7345 1/2" 3/8"9.96 mm

2.09"53.1 mm

7397 1/2" 1/2"13.51 mm

2.04"51.8 mm

QUICK DISCONNECT ADAPTER - ELBOW

SKU A (Tube) B (NPT) C (Length)

7384 1/4" 1/4" 1.56" 39.6 mm

7255 1/4" 3/8" 1.56"39.6 mm

7272 1/2" 3/8" 1.89"48.0 mm

QUICK DISCONNECT ADAPTERS - NPT

SKU A (Tube Size) B (Barb) C (Length)

7037 1/4" 1/4"7.24 mm

1.80"45.7 mm

7038 1/4" 3/8"9.96 mm

1.80"45.7 mm

7039 5/16" 1/4"7.24 mm

1.88"47.8 mm

7040 5/16" 3/8"9.96 mm

1.88"47.8 mm

7041 3/8" 1/4"7.24 mm

1.88"47.8 mm

7042 3/8" 3/8"9.96 mm

1.88"47.8 mm

SKU A (Tube Size) B (Male Flare) C (Length)

7069 1/4" 1/4" (7/16-20) 1.59"40.4 mm

7043 1/4" 5/16" (1/2-16) 1.59"40.4 mm

7088 5/16" 1/4" (7/16-20) 1.72"43.7 mm

7060 5/16" 3/8" (5/8-18) 1.72"43.7 mm

7061 3/8" 3/8" (5/8-18) 1.72"43.7 mm

SKU A (Barb) B (Female Flare) C (Length)

7263 1/4"7.24 mm 1/4" (7/16-20) 2.04"

51.8 mm

7280 1/4"7.24 mm 3/8" (5/8-18) 2.00"

50.8 mm

7466 3/8"9.96 mm 1/4" (7/16-20) 2.05"

52.10 mm

7264 3/8"9.96 mm 3/8" (5/8-18) 1.96"

49.8 mm

TUBE COMPRESSION TO BARB

COM

PRESSION

FEMALE FLARE TO BARB COMPRESSION

TUBE COMPRESSION TO MALE FLARE

QUICK DISCONNECT ADAPTERS

B

C

A

A

C

B

B

C

A

B

C

A

D

C

B

A

46 47

SKU Clamp Range – inches Clamp Range – mm

0070 .228 – .276 5.8 – 7.0

0080 .268 – .315 6.8 – 8.0

0087 .276 – .343 7.0 – 8.7

0095 .307 – .374 7.8 – 9.5

0100 .327 – .394 8.3 – 10.0

0105 .347 – .413 8.8 – 10.5

0109 .362 – .429 9.2 – 10.9

0113 .378 – .445 9.6 – 11.3

0118 .398 – .465 10.1 – 11.8

0123 .386 – .484 9.8 – 12.3

0128 .406 – .504 10.3 – 12.8

0133 .425 – .524 10.8 – 13.3

0138 .445 – .543 11.3 – 13.8

0140 .453 – .551 11.5 – 14.0

0145 .472 – .571 12.0 – 14.5

0153 .504 – .602 12.8 – 15.3

0157 .520 – .618 13.2 – 15.7

0162 .539 – .638 13.7 – 16.2

0170 .571 – .669 14.5 – 17.0

0185 .602 – .728 15.3 – 18.5

0198 .654 – .780 16.6 – 19.8

0210 .701 – .827 17.8 – 21.0

0226 .764 – .890 19.4 – 22.6

0241 .823 – .949 20.9 – 24.1

0256 .882 – 1.008 22.4 – 25.6

0271 .941 – 1.067 23.9 – 27.1

0286 1.00 – 1.126 25.4 – 28.6

0301 1.059 – 1.185 26.9 – 30.1

0455 1.665 – 1.791 42.3 – 45.5

OET

IKER

CLA

MPS OETIKER STEPLESS EAR CLAMPS

SKU Description

1099-I Side Jaw Pincers

14100082 Standard Jaw Pincer

SKU Description

8013 Tube Cutter

8013-3 Replacement Blade

OETIKER CLAM

PSOETIKER PINCERS

TUBE CUTTERS

48 49

SKU Description Quantity

0133 Oetiker Stepless Ear Clamps 100



1001 Nuts 50

1002 Nuts 1

1003 Nuts 25

3006 Stems 50

3007 Stems 1

3008 Stems 10

3009 Stems 15

3013 Splicers 10

3015 Barb to Male Flare Adapters 2


3027 Barbed Plugs 10

3028 Barbed Plugs 5

3093 Cap Nut 1

3094 Cap Nut 1

4001 Splicers 25

4002 Splicer – 90° – From Tubing 1


7006 Barb Hose Tees 20


7008 Barb Hose Tees – Reducing 5

7009 Barb Hose Tee – Enlarging 1

7010 Barb Hose Crosses 5

7012 Splicers – Reducers 15

7013 Swivel – Elbows 5


7051 U-Bend Manifold – Single Barb 1

7058 Swivel – Straight 1


8007 Flare Washers 200


8013 Tube Cutter 1

1099-I Side Jaw Pincers 1

8014 Empty Case for Starter Kit 1

STARTER KITS8012 - STARTER KIT

SKU Description Quantity




1001 Nuts 50

1002 Nuts 1

1003 Nuts 25

3006 Stems 50

3007 Stems 1

3008 Stems 10

3009 Stems 15

9013 Splicers 10




9028 Barbed Plugs 5

3093 Cap Nut 1

3094 Cap Nut 1

9001 Splicers 25








9012 Splicers - Reducers 15




7058 Swivel – Straight 1




8013 Tube Cutter 1

1099-I Side Jaw Pincers 1

8014 Empty Case for Starter Kit 1

STAR

TER

KITS 8025 - STARTER KIT

50 51

Part Number Circuits Line Length (ft) Tube Size (in) Measurements (in)

8x12-1 1 11' 1/4" 8" x 12"

8x12-2 2 11' 1/4" 8" x 12"

8x12-3 3 11' 1/4" 8" x 12"

8x12-4 4 11' 1/4" 8" x 12"

8x12-5 5 11' 1/4" 8" x 12"

8x12-6 6 11' 1/4" 8" x 12"

8x12-7 7 11' 1/4" 8" x 12"

8x14-1 1 12' 1/4" 8" x 14"

8x14-2 2 12' 1/4" 8" x 14"

8x14-3 3 12' 1/4" 8" x 14"

8x14-4 4 12' 1/4" 8" x 14"

8x14-5 5 12' 1/4" 8" x 14"

8x14-6 6 12' 1/4" 8" x 14"

8x14-7 7 12' 1/4" 8" x 14"

8x14-8 8 12' 1/4" 8" x 14"

10x15-1 1 18' 1/4" 10" x 15"

10x15-2 2 18' 1/4" 10" x 15"

10x15-3 3 12' 5/16" 10" x 15"

10x15-4 4 12' 5/16" 10" x 15"

10x15-5-Pre 5 18' 1/4" 10" x 15"

10x15-5-Post 5 11' Water / 7' Syrup 5/16" 10" x 15"

10x15-6-Pre 6 18' 1/4" 10" x 15"

10x15-6-Post 6 11' Water / 7' Syrup 5/16" 10" x 15"

10x15-7 7 2 water @ 11' / 5 Syrup @ 7' 5/16" 10" x 15"

10x15-8 8 7' 5/16" 10" x 15"

12x18-2 2 18' 5/16" 12" x 18"

12x18-3 3 18' 5/16" 12" x 18"

12x18-4 4 18' 5/16" 12" x 18"

12x18-5 5 18' (3) / 13' (2) 5/16" 12" x 18"

12x18-6 6 18' (2) / 13' (4) 5/16" 12" x 18"

12x18-7 7 18' (2) / 13' (5) 5/16" 12" x 18"

12x18-8 8 13' 5/16" 12" x 18"

18x12-6 6 18' (2) / 13' (4) 5/16" 18" x 12"

17x19-2 2 25' 5/16" 17" x 19"

17x19-3 3 25' 5/16" 17" x 19"

17x19-4 4 25' 5/16" 17" x 19"

17x19-5-Pre 5 25' 5/16" 17" x 19"

17x19-5-Post 5 25' Water (2) / 12' (3) 5/16" 17" x 19"

17x19-6-Pre 6 16' 5/16" 17" x 19"

17x19-6-Post 6 25' Water (2) / 12' (4) 5/16" 17" x 19"

17x19-7 7 (2) water @ 25' / (5) syrup @ 12' 5/16" 17" x 19"

A cold plate is a block of aluminum designed for placement at the bottom of a bar’s ice bank. Our cold plates have up to eight stainless steel tubes inside each measuring up to eighteen feet for optimal chilling. The cold plate can be used as either a primary or secondary chiller for draught beer and/or non-alcoholic beverages using ice or re-circulated glycol as the cooling agent. They come in varying sizes to match the many different ice bank measurements.

COLD

PLA

TES Fitting ID Sub Family Page Fitting ID Sub Family Page






























1001 Nuts 6

1002 Nuts 6

1003 Nuts 6

1009 Nuts 6

1011 Nickel Plated Beer Stems 36





1018 Nuts 6

1020 Beer Nut 36

1026 Bulkhead Adapter – Spanner Nut 24

1030 Nuts 6

1041 Nuts 6

1056 Jug Growler Filler 40

1066 NPT to Male Flare 25

1067 NPT to Barb 25


1072 Beer Gas Nipple 37

1073 Brass Check Valve for Beer 41

1074 Brass Check Valve for Beer 41

1099-I Oetiker Pincers 46

14100082 Oetiker Pincers 46

3001 Male Flare to Male Flare 23





3006 Stems 7

3007 Stems 7

3008 Stems 7

3009 Stems 7


3013 Splicers 8

3014 Stems 7

3015 Barb to Male Flare 19





3022 Splicers 8

3023 Stems 7



3032 Male Flare Plugs 15



3038 Wunder-bar Inlets – Straight 32


3046 Valve Inlets – Straight – Single O-Ring 35


3055 Wunder-bar Inlets – 90° 32







3082 Female Flare to Male Flare 25

3091 Barb to Female Flare 24

3093 Cap Nuts 15

3094 Cap Nuts 15


3129 Stems 7

3130 Splicers 8

3135 Stems 7



3143 Flojet Inlets – Straight 34



3157 Stems 7


3178 Nuts 6

3186 Stems 7

FITTING

IND

EX

52 53

3196 Nuts 6

3203 Stems 7

3204 Stems 7

3205 303 Stainless Steel Beer Stems 36



3216 Barb to NPT 20

3220 Splicers 8




3234 Splicers 8

3236 Valve Inlets – Straight – Double O-Ring 35


3239 Barb to NPT 20

3240 Barb to NPT 20

3241 Barb to NPT 20

3242 Barb to NPT 20

3243 Barb to NPT 20


3245 Stems 7

3246 NPT to NPT 22


3249 Bulkhead Adapters 24


3273 Barb to NPT 20

3278 Barb to NPT 20






3297 Barb to NPT 20





3310 Stems 7

3311 NPT Reducing Bushing 23



3314 Barb to Female NPT 20

3325 Flojet Inlets – Straight – Quad Port 34




3340 Beer Nut 36



3367 Barb to NPT 20

3378 Barb to NPT 20


3389 Beer Cap Nut 41

4001 Splicers 8

4002 Splicers – 90° – from Tubing 10


4008 Barb Elbow to Smooth Finish – 90° 42

4009 U-Bends 26

4014 U-Bends 26


4016 Knurled Cap Nut 43

4017 U-Bends 26

4019 U-Bends 26



4048 Splicers from Tubing 10






4103 Beer Stem – Elbows 37


4108 U-Bends 26



4119 Stainless Wall Bracket – Straight Splicer 38

4121 Barb Elbow to Smooth Finish - 45° 42

4124 Cold Plate Rack for Jockey Box 42










7009 Barb Hose Tees – Enlarging 12




7013 Swivels – Elbows 31

7014 Welded Barb Elbow 11

7015 Swivels – U-bend 31

7016 Manifolds – Straight – Male flare 30

7017 Manifolds – Straight – Male flare 30


7019 Barb Hose Crosses – Reducing 13

7020 Male Flare Tees 16



7023 Barb Tees to Male Flare 16




7027 Male Flare Crosses 16

7028 Male Flare Crosses 16

7029 Barb Crosses to Male Flare 16




7037 Tube Compression to Barb 44






7043 Tube Compression to Male Flare 44

7044 Barb Tees to Female Flare 17


7046 Female Flare to Barb Tees 18

7047 Female Flare to Barb Tees 18

7048 Flojet Inlets – 90° – Double O-Ring 34


7050 Manifolds – Straight – Male Flare 30

7051 U-Bend Manifolds – Single Barb 27

7052 Female Flare to Barb Elbow – Welded 19



7055 Female Flare to Male Flare Tees 17

7056 Female Flare to Female Flare – Elbows 25

7058 Swivels – Straight 31












7070 Female Flare to Male Flares 17


7072 Valve Inlets – 90° – Double O-Ring 35


7075 Y-Tee – Reducing 13

7076 U-Bend Manifolds – Single Male Flare 28

7077 U-Bend Manifolds – Male Flare 29






7083 Barb Crosses to Female Flare 17

7084 Barb Crosses to Female Flare 17





7089 Y-Tees 13







7096 Flojet Inlets – 90° 34


7098 Female Flare to Male Flares – Elbows 24






7106 Y-Crosses 14

7107 Splicers 8


7111 Barb Hose Cross – Enlarging 13

7112 Shurflo Inlets – 90° 33
















7130 Splicers – 90° – Reduces 10


7132 Splicers – 90° – Reducers 10

7133 Splicers – 90° – Reducers 10

7136 Y-Tees 13

7137 Y-Crosses – Reducer 14

7139 U-Bend Manifolds – Multi-Barbed 28


7142 U-Bend Manifolds – With Side Outlet 29


7144 Y-Crosses 14

FITTING

IND

EXFITT

ING

IND

EX Fitting ID Sub Family Page Fitting ID Sub Family PageFitting ID Sub Family Page Fitting ID Sub Family Page

54 55



7151 Manifolds – Straight – Barbed/Flared 30

7152 Manifolds – Straight – Barbed/Flared 30




7156 Welded Barb Elbow 11




7161 Male Flare Tee to NPT 18

7162 Barb to NPT – Elbows 21


7165 NPT to Male Flare – Elbows 23

7166 Barb to NPT – Elbows – Sweep 21

7168 Barb Tee to NPT 18


7170 Barb to NPT 20
















7194 Swivel – 45° 30


7198 Female Flare to Barb Elbows – Welded 19



7212 Quick Disconnect Adapters 45




7218-1 Manifolds – Straight – Barbed 30







7236 Shurflo Inlets – Straight 33




7245 Shurflo Inlets – Straight 33

7246 Barb Hose Tees - Reducing 14

7249 Welded Barb Elbows 11

7252 U-Bends – Reducing 26

7253 Shurflo Inlet (NPT) – Straight 33


7255 Quick Disconnect Adapters – NPT 45


7260 U-Bend Manifold – NPT 29

7261 Barb to NPT 20

7262 Barb to NPT 20

7263 Female Flare to Barb Compression 44


7266 Y-Tees 13

7268 Female Flare to Male Flare Tees 17

7269 Beer Stem – Male Flares 37



7273 Shurflo Quick Connect – Elbows 33


7277 Shurflo Quick Connect – Elbows 33






7288 Female Flare to Male Flare Compression 45

7289 Female Flare to Male Flare Compression 45

7290 NPT to NPT – Elbow 22


7294 Beer Stem – Quick Disconnect 41

7295 Female Flare to Female Flare – Elbows 25






7303 Barb Tee to Female NPT 19









7332 Quick Disconnect Adapters – Elbow 45




7343 NPT to NPT 22




7354 Manifolds – Straight – Barbed 30




7373 Female Flare to Male Flare – Elbows 24







7391 NPT to NPT 22






7438 Barb to Male Flare – Elbows – Sweep 25


7466 Female Flare To Barb Compression 44



7472-1 Stainless 2-Way Beer Manifolds – Straight 40


7475 Beer Nut To Beer Thread – Elbow 41

7477 Stainless 6-Way Beer Cleaning Manifolds – Star 39

7476 Stainless 8-Way Beer Cleaning Manifolds – Straight 39









7516 Barb to NPT 20

7512 Stainless Beer Nut To Beer Thread – "Y" Fitting 39

7513 Stainless Wall Bracket - Beer Thread – "Y" Fitting 39

8001 O-Rings – EPDM 70 – NSF 61 43

8002 O-Rings – EPDM 70 – NSF 61 43

8003 O-Rings – EPDM 70 – NSF 61 43




8010 O-Rings – EPDM 70 – NSF 61 43


8012 Starter Kit – 8012 48

8013 Tube Cutters 46

8013-3 Tube Cutters 46

8015 O-Rings – EPDM 70 – NSF 61 43

8016 Beer Washer 37

8025 Starter Kit – 8025 49

8031 O-Rings – EPDM 70 – NSF 61 43

8035 O-Rings – EPDM 70 – NSF 61 43

8054 Beer Wing Nut 37

9001 Splicers 8










9013 Splicers 8

9014 U-Bends 26


9017 U-Bends 26

9019 U-Bends 26








9089 Y-Tees 13



9099 U-Bends 26

9107 Splicers 8



9130 Splicers 8

9136 Y-Tees 13


9156 Jug Growler Filler 40

9198 Y-Tee – Reducer 14


9200 Universal Barb Plug 15

9223 Splicers - Reducers 9

9400 Faucet Lever 42

9403 Stainless Wall Bracket – Beer Thread 38

9404 Stainless Wall Bracket – Beer Thread to Barb 38

9406 Stainless Wall Bracket – 45° Splicer 38

FITTING

IND

EXFITT

ING

IND

EX Fitting ID Sub Family Page Fitting ID Sub Family Page Fitting ID Sub Family Page Fitting ID Sub Family Page

Fittings, Inc.3300 Fisher AvenueFort Worth, Texas 76111 (USA)

Toll Free: 800-473-3301Phone: 817-332-3300Fax: 817-332-5102E-mail: [email protected]: www.fitandcp.com

Fittings Catalog 2016 - fitandcp.com...Fittings made of stainless steel are durable, reusable and...

Documents

Transcript of Fittings Catalog 2016 - fitandcp.com...Fittings made of stainless steel are durable, reusable and...