Reid D Stirrup Connection Plate without Ferrule

Corner Joining Plate Panel Clip

Reid D Stirrup Connection Plate with Ferrule

Reid Edge Plate with legs

Code LengthTIM12X65 12mm x 65mmCFMS12 12mm x 75mmCFMS16 16mm x 75mmCFMS20 20mm x 75mmCFM16 16mm x 96mmCFM20 20mm x 96mmCFM24 24mm x 96mm

Description CodeBar length – typically 3 metre ZBAR-3M

100mm coupler ZBARC-100MM50mm coupler ZBARC-50MMWingnut ZBARWNFlange plate ZBARFPWater Stop ZBARWS

Sizes Code40mm dia. X 2.5 m in length SD4025050mm dia. X 2.5 m in length SD50250 60mm dia. X 2.5 m in length SD6025070mm dia. X 2.5 m in length SD70250

Code ColourBPB250 BlackBPO250 Orange

• Easy to clean and fast to dry• Saves time in finishing process• Durable and long lasting• Cost effective• Works well with decorative

stamping mats• Competitively priced• Will not adhere to most concrete

surfaces regardless of aggregate or additives• Enables finisher to wear steel cap boots during finishing

EXTRUDED PLASTIC FILLET & MOCK JOINT/ STYRENE FOAM BLOCKOUTS

Z BAR THREADED REINFORCING - FORMWORK SYSTEMS

SPIRAL DUCT TUBING

THREADED INSERT

BUILDER’S PLASTIC – BLACK AND ORANGE

CAST-IN AND PANEL JOINING PLATES

FINISHING SLICKS TM BURKE BARS FSI BB

ABS/BURKE BARS• Bars will lift 4.74T and can be used for many different

applications by many different trades• General building contractors• Railway - positioning concrete sleepers• Cranes - moving and positioning loads• Councils - Mech. Workshop & moving heavy loads in

parks & recreational areas• Formworkers - Precast and tilt-up panel erectors

straining posts, fencing, tractor tyres and tree stumps• Mining

Threaded InsertCross hole threaded inserts (ferrules) are available in zinc, stainless steel and HDG on request.Other types of threaded inserts can also be accessed on request. For example coil bolt ferrules and elephant foot.

Extruded plastic fillet & mock jointExtruded plastic edging fillet, available in 12mm & 19 mm profiles.40mm extruded plastic mock joint is also available on request.

15mm (nominal) Z – BAR AND ACCESSORIESZ-Bar is a threaded reinforcing bar typically used for formwork related applications throughout the construction industry.

Spiral Duct has numerous applications throughout the Tilt-Up and Panel Precast market segments and is also used widely in special precast applications like casting bridge beams and other commercial concrete segments.

Builder’s plastic is a commonly used product which has numerous applications throughout the building industry. Also known as concrete underlay, our building film meets Australian Standards for medium impact requirements. High impact film can also be obtained if required.Size - Standard rolls - 4 metres (folded to 2 meters) x 50 metres in lengthType - High ImpactThickness - 200 UM

Styrene foam blockoutsProduct is cut to size for specific applications.

Finishing slicks TM concrete finishing overshow fit over your normal work boots allowing you to finish concrete without having to change shows. Simply slide your shoe under the strap, and secure the latch with the strap behind your heel.

257