FINISHING SECTIONS - Architecture & Design · For many years, architects, interior designers and...
Transcript of FINISHING SECTIONS - Architecture & Design · For many years, architects, interior designers and...
Clean. LinesNo Architraves
The EZY Finishing System is a complete solution for achieving the ultimate ‘clean line’ interior finish for modern buildings. Flush-finish walls and ceilings are produced quick and easy with the EZY range of durable metal sections, including the patented EZYjamb door jamb.
Stunningly discrete, the EZY Finishing System is a perfect combination of versatile functionality and inconspicuous detail which creates a unique harmony in the square-set, architrave-free rooms it adorns.
Designed and manufactured in Australia by Studco, the leaders in innovative building products.
Modern stylingAchieve an award winning square-set finish
Fast constructionThe fastest, most economical way to create that flush-finish look
Secure & durable Manufactured from highest quality cold-formed metal sections
Complete systemEasy to create a consistent, contemporary theme throughout
Benefits of the EZY-Finishing System
CustomShadowline
OtherSections
Contact Studco to obtain our separate EzyJamb brochure.
a EZY-REVEAL….durable metal window reveals
Custom Sizes Available On Request
Eliminate architraves and create pure clean lines for square set interiors using Ezy-Reveal. Manufactured from cold rolled steel Ezy-Reveal provides a strong and secure reveal eliminating warping, twisting, cracking and damage from UV rays. Installation is simple. The strong and durable metal rollformed EZY sections have pre-punched perforated sides for fixing and have a specially formulated surface finish for a seamless connection with the plasterboard.
• Designed for quick and economical finishing of reveal from 20 to 250mm.
• 20 width variants to suit various applications• Specially formulated surface finish for seamless
connection with plasterboard• Ezy-Reveal can be used with PVC finish trim to
create custom size reveals• Custom made width and length Ezy-Reveal
available
Part EZY REVEAL Section Length No. Width mm.
RA20 20mm x 0.8 Reveal Angle 20mm 3000 & 3600
RA25 25mm x 0.8 Reveal Angle 25mm 3000 & 3600
RA30 30mm x 0.8 Reveal Angle 30mm 3000 & 3600
RA35 35mm x 0.8 Reveal Angle 35mm 3000 & 3600
RA40 40mm x 0.8 Reveal Angle 40mm 3000 & 3600
RA45 45mm x 0.8 Reveal Angle 45mm 3000 & 3600
RA50 50mm x 0.8 Reveal Angle 50mm 3000 & 3600
RA60 60mm x 0.8 Reveal Angle 60mm 3000 & 3600
RA65 65mm x 0.8 Reveal Angle 65mm 3000 & 3600
RA75 75mm x 0.8 Reveal Angle 75mm 3000 & 3600
RA80 80mm x 0.8 Reveal Angle 80mm 3000 & 3600
RA90 90mm x 0.8 Reveal Angle 90mm 3000 & 3600
RA100 100mm x 0.8 Reveal Angle 100mm 3000 & 3600
RA110 110mm x 0.8 Reveal Angle 110mm 3000 & 3600
RA120 120mm x 0.8 Reveal Angle 120mm 3000 & 3600
RA135 135mm x 0.8 Reveal Angle 135mm 3000 & 3600
RA150 150mm x 0.8 Reveal Angle 150mm 3000 & 3600
RA180 180mm x 0.8 Reveal Angle 180mm 3000
RA200 200mm x 0.8 Reveal Angle 200mm 3000
RA250 250mm x 0.8 Reveal Angle 250mm 3000
Flush finish wall ends are a clean and fast using Ezycap. Manufactured from cold rolled steel providing a strong and secure wall end cap that is both durable and fast to install. Hard to reach wall ends are made possible, capping of internal balustrades, window openings and internal partition wall ends are all made easy using the strong and versatile Ezycap.
• Ezycap is available in a range of sizes to suit various wall configurations.
• Eliminate cracking on wall ends using the Ezycap slip fit fixing method
• Custom lengths available
• Reduce compound usage for each stop end using Ezycap
• Prefinished surface standard, no extra preparation required
a
b
Ezycap….quick and economical wall ends
EZY CAP Part Section Section Configuration Length No. Width a Width b and Plaster mm
FC79 79mm 84mm 51 stud + 13 + 13 2700/3000/3600
FC86 86mm 91mm 64 stud + 10 + 10 2700/3000/3600
FC92 92mm 97mm 64 stud + 13 + 13 2700/3000/3600
FC98 98mm 103mm 76 stud + 10 + 10 2700/3000/3600
FC104 104mm 107mm 76 stud + 13 + 13 2700/3000/3600
FC112 111mm 116mm 92/90 stud + 10 + 10 2700/3000/3600
FC118 120mm 125mm 92/90 stud + 13 + 13 2700/3000/3600
FC127 127mm 132mm 92 stud + 16 + 16 2700/3000/3600
Custom Sizes Available On Request
Ezy-Pelmet
The newest addition to the EZY family of flush-finish products adds a completely new dimension to the internal perimeter of square-set interiors. Window blinds disappear, feature lighting is cleverly concealed and vast panoramas open up before your eyes with the all new Ezy-Pelmet® from Studco.Ezy-Pelmet® is a two piece, pre-finished cold-rolled steel section which provides a fast, economical and prestigious solution for creating recessed window pelmets in plasterboard ceilings. It provides a simple and discrete transition between the interior ceiling and external windows, curtain wall facades or the building structure.
• Contemporary, clearview design• Flush-finish edge for square-set interiors• Completely concealed fixings• Does not require fixing from the top• Finished in white, no need to paint• Install from below after ceiling • Fastest method for creating window pelmets• Suitable for blinds, curtain, lights & more
Ezy-Pelmet® is at home in apartments, offices, hospitals, schools, houses and just about any other application where a luxurious, clearview outlook is sought.
150mm
150mm40mm
Custom Sizes Available On Request
Fastcap
Custom finishing and capping of plasterboard is made easy with the Fastcap® range of custom finishing sections.Custom finishing and capping of plasterboard is made easy with Fastcaps® range of custom made finishing sections. Our custom design and consultancy team is ready to help design and produce an innovative solution to your requirements for any size project.
a
bCustom Sizes Available On Request
CustomShadowline
Architects and homeowners have been increasingly choosing interior designs characterised by clean, contemporary lines. The popular standard 10mm SL10 metal shadowline profile is used to provide that unique line around a perimeter of a ceiling, doorway or floor skirting. However the standard 10mm shadowline leaves little margin for error and the 10mm margin is often not enough. Custom shadowline from Studco provides and alternative to address these concerns.
• Create the exact shadwoline you need
• Allow for variations in floor height aor plaster thickness using a custom formed section
• Creativity and solutions to overcome isssues using standard SL10 profile
• Heavy duty 0.8 zincaneal material to create a perfect straight and clean line
a
b
CUSTOM SHADOWLINE……….create versatile shadowline
Custom Finishing Sections
The clean line and square set look can now be achieved throughout your complete project. Contact the team at Studco to assist you with creating a custom flush finish section to suit your needs. Here at Studco we can provide a whole finishing package that will enable you to deliver the flush finish look. Call us today to see how we can assist.
CUSTOM FINISHING SECTIONS……create harmonious finishing sections
Ezy-Jamb...The Flush Finish Door Jamb System
For many years, architects, interior designers and developers have been trying to produce a contemporary flush finish door jamb with clean lines and inconspicuous detail.
Ezy-Jamb does just that!
Ezy-Jamb is a split-type jamb manufactured from cold rolled steel with a patented profile to produce a strong and secure assembly. The jamb comes with perforated sides for flush jointing giving the doorway a clean line look.
Ezy-Jamb is simple to install, and it requires no special maintenance. The jamb is a split-type and comes in two sections that fit neatly together and provides adjustability in wall thickness. The system is complemented by a range of hardware to suit different applications.
THE ALL NEW Cornerbead• Optimum Nib Profile MINIMUM COMPOUND, SMOOTHER FINISH• Increased Steel Gauge SHARPER, STRAIGHTER LINES• 30mm Perforated Legs WITH MAXIMUM COMPOUND ADHESION• Quality Galvanised Steel LONGER LASTING DURABILITY• Packaged In Boxes PROTECTION FOR YOUR CONVENIENCE
Available in Australia, New Zealand, USA, UK and Europe.
Email: [email protected]: www.ezyjamb.com.au
Ring for nearest Distributor
Customer Service Hotline1300 EZY JAMB
INSTALLationEzy-Jamb is simple to install, and it requires no special
maintenance. The jamb is a split-type and comes in
two sections that fit neatly together and provides
adjustability in wall thickness.
The system is complimented by a range of hardware to
suit different applications.
LATCH PLATE PUNCHING
SELF TAPPERSCREWS
LATCH PLATE
PLASTERVARYING SIZES
TIMBER OR STEEL
WALL STUD
TYPICALFIXING
(SCREWS)
REINFORCEDROLLED EDGE PERFORATED
SIDE STRIPS ADJUSTABLE SIDE SECTIONFRICTION FITTED TO STOP
STEEL JAMB
CONCEALED JOINTING SYSTEM
HINGE
DOOR
LATCH PLATE INSERT
FLUSH FINISH DOOR JAMB SYSTEM
PLASTERBOARD BEADS
™
MANUFACTURED BY:ANOTHER PRODUCT FROM: