FINISHING COLLECTION AND GUIDE LINE RECIPE
-
Upload
api-19663176 -
Category
Documents
-
view
784 -
download
16
Transcript of FINISHING COLLECTION AND GUIDE LINE RECIPE
.
FABRIC PREPARATION BEFORE FINISH
• WASHING OFF:1.0 g/l Ladiquest-1097Treat at 40°C for 10-15 minutesRinse thoroughly with cold water
• NEUTRALIZATION:1.0 g/l Sirrix-NE0.5 g/l Acetic acid
Treat at 60° C for 20-30 minutesWash cold..
STAIN REPELLENT FINISH:40-60 g/l Nuva-HPCpH 4-4.5 Adjust with acetic acid
Pad with 70-75 % pick upDry at 120°CCured at 150°C for 4 minutes.
FABRIC PREPARATION BEFORE FINISH
• WASHING OFF:1.0 g/l ladiquest-1097Treat at 40°C for 10-15 minutesRinse thoroughly with cold water
• NEUTRALIZATION:
1.0 g/l Sirrix-NE0.5 g/l Acetic acid
Treat at 60°C for 20-30 minutesWash cold.
FINISHING PROCEDURE:
40-60 g/l Nuva-HPC5 g/l Ceraperm-JET
Pad with 70-80 % pick upDry at 140°CCured at 150°C for 4 minute.
FABRIC PREPARATION BEFORE FINISH
• WASHING OFF:1.0 g/l Ladiquest-1097
Treat at 40°C for 10-15 minutesRinse thoroughly with cold water
• NEUTRALIZATION:1.0 g/l Sirrix-NE0.5 g/l Acetic acid
Treat at 60°C for 20-30 minutesWash cold.
FINISHING PROCEDURE:
50 g/l Nuva-HPC20 g/l Cassaperet-SRHA
pH 4-4.5 adjust with acetic acid Pad with 70-75 % pick upDry at 120°CCured at 150°C for 4 minutes
FABRIC PREPARATION BEFORE FINISH
WASHING OFF:1.0 g/l Ladiquest-1097
Treat at 40°C for 10-15 minutesRinse thoroughly with cold waterNEUTRALIZATION:
1.0 g/l Sirrix-NE0.5 g/l Acetic acid
Treat at 60° C for 20-30 minutesWash cold.FINISHING PROCEDURE:
40 g/l Nuva-SRB10 g/l Nuva-HPC80 g/l Arkofix-NEC30 g/l Ceranine-L40 g/l Sandolube-NVJ12 g/l Magnesium chloride
Pad with 70-75 % pick upDry at 120°CCured at 150°C for 4 minutes.
FABRIC PREPARATION BEFORE FINISH
WASHING OFF:1.0 g/l Ladiquest-1097
Treat at 40°C for 10-15 minutesRinse thoroughly with cold water
NEUTRALIZATION:1.0 g/l Sirrix-NE0.5 g/l Acetic acid
Treat at 60°C for 20-30 minutesWash cold.
FINISHING PROCEDURE:40-60 g/l Nuva-FD/3585pH 4-4.5 Adjust with acetic acidPad with 70-75 % pick up
Dry at 120°CCured at 150°C for 4 minutes.
FINISHING PROCEDURE:
40-60 g/l Arkofix-NEC15-20 g/l Cassurit-HML6-9 g/l Magnesium chloride40-50 g/l Ceranine-L20-30 g/l Sandoperm-FE10-15 g/l Ceraperm-MW0.5 g/l Acetic acid
Pad with 80 % % pick upDry at 110°C with residual moisture of 8-12 %(need exact controlling)Calandar at 180°c with 20-40 tons without frictionCalandar at 180°C with 20-40 tons friction (e.g 150-200 %)Cure at 150-160°C for 2-4 minutes.
• FINISHING PROCEDURE:60-80 g/l Arkofix-NEC20 g/l Ceraperm-3K20 g/l Ceranine-L10 g/l Solusoft-SM8 g/l Magnesium chloride
Pad with 70 % pick upDry at 120°CCured at 150°C for 4 minutes
FABRIC PREPARATION BEFORE FINISH
NEUTRALIZATION:1.0 g/l Sirrix-NE0.5 g/l Acetic acid
Treat at 60°C for 20-30 minutesWash cold.
FINISHING PROCEDURE:
40-80 g/l Nuva-HPC80 g/l Arkofix-NEC30 g/l Ceranine-L5 g/l Ceraperm-JET15 g/l Sanitized T 96-2010 g/l Magnesium chloridepH 4-4.5 Adjust with acetic acid
Pad with 70-80 % pick upDry at 140°CCured at 150°C for 4 minutes.
FABRIC PREPARATION BEFORE FINISH
• WASHING OFF:1.0 g/l Ladiquest-1097
Treat at 40°C for 10-15 minutesRinse thoroughly with cold water• NEUTRALIZATION:
1.0 g/l Sirrix-NE0.5 g/l Acetic acid
Treat at 60°c for 20-30 minutesWash cold.FINISHING PROCEDURE:
100 g/l Nuva-HPC/Nuva-HPU100 g/l Arkofix-NEC20 g/l Sandolube-SVN5 g/l Ceraperm-JET15 g/l Magnesium chloride
L : R = 1: 10Temperature = room tempTime = 20-30 minutesHydro with 50% remaining moistureTumble dry with 10% moisturePress properlyCured at 150° C for 15-20 minutes.
FABRIC PREPARATION BEFORE FINISH
NEUTRALIZATION:1.0 g/l Sirrix-NE0.5 g/l Acetic acid
Treat at 60°C for 20-30 minutesWash cold.
FINISHING PROCEDURE:
40 g/l Arkofix-NEC plus80 g/l Appretan-N-921220 g/l Ceraperm-MW20 g/l Ceranine-L6 g/l Magnesium chloride
Pad with 70-75 % pick upDry at 120°CCured at 150°c for 4 minutes
FABRIC PREPARATION BEFORE FINISH
NEUTRALIZATION:1.0 g/l Sirrix-NE0.5 g/l Acetic acid
Treat at 60°C for 20-30 minutesWash cold.
FINISHING PROCEDURE:
60-80 g/l Arkofix-NEC20 g/l Ceraperm- MW liq conc20 g/l Ceramnine - L12 g/l Magnesium chloride
Pad with 70-75 % pick upDry at 120°CCured at 150°C for 4 minutes
FINISHING PROCEDURE :300 g/l Appretan-CTM150 g/l Appretan-N 941560 g/l Cassurit-HML9 g/l Magnesium chloride
Pad with 75-80 % pick upDry at 180°C for 45 seconds.
FINISHING PROCEDURE:RECIPE-1 RECIPE-2
Appretan-MB g/l 100 50Appretan-CTM g/l - 20Ceranine-KWL flakes g/l 10 10
Pad with 75 % pick upDry at 140°C.
FINISHING PROCEDURE:40 g/l Appretan-N 921210 g/l Solusoft-UP
Pad with 70 % pick upDry at 140°CCured at 160°C for 2 minutes.
FINISHING PROCEDURE:20 g/l Decofix-SW
Pad with 70-80 % pick upDry at 120°CCured at 150°C for 2 minutes
FINISHING PROCEDURE:
80 g/l Appretan-70160 g/l Appretan-N-921215 g/l Ceranine-L15 g/l Ceraperm-MW20 g/l Leomin-V-10049
Pad with 70-75% pick upDry at 120°cCured at 150°C for 3 minutesCalendar on both sides.
Note: Do not stretch the fabric during finishing
FINISHING PROCEDURE:
400 g/l Pekoflam-OP
Pad with 70-75 % pick upDry at 140°C
FINISHING PROCEDURE:
400-500 g/l Pekoflam-HSD
Pad with 70-75 % pick upDry at 140°CCured at 150°C for 4 minutes
FINISHING PROCEDURE:500 g/l Pekoflam-DPN25 g/l Phosphoric Acid60 g/l Cassurit-HML
Pad with 70-80 % pick upDry at 140°CCured at 150°C for 4 minutes
NEUTRALIZATION:
20 g/l Soda ashTreat at 60°C for 15-20 minutesWash warm & coldDry at 130°C
BY EXHAUST METHOD:
FINISHING PROCEDURE:L : R = 1 : 10
1.0 % Sanitized T 96-20Treat at R/temp for 20 minutesHydro and dry at 100°C
BY CONTINOUS METHOD:FINISHING PROCEDURE:
15 g/l Sanitized T 96-20Pad with 70 % pick upDry at 140°C
FINISHING PROCEDURE:
50 g/l Sanitized GT 86-06
Pad with 70-75 % pick upDry at 130°C
FINISHING PROCEDURE:
15 g/l Actigard AM 21-16
Pad with 70-75 % pick upDry at 130°C
FINISHING PROCEDURE:18 g/l Actifresh 20-1025 g/l Stabilizer-KZP60 g/l Arkofix-NEC plus10 g/l Ceraperm-MW liq conc20 g/l Solusoft-UP20 g/l Sandolube-SVN9 g/l Magnesium chloride
Pad with 70 % pick upDry at 120°C Cured at 150°C for 4 minutes.
FINISHING PROCEDURE:
40-80 g/l Arkofix NEC LIQ6-12 g/l Magnesium chloride15-20 g/l Solusoft-UP20 g/l Sandolube-SVN20 g/l Ceraperm-MW liq conc
Pad coldPick up 70-80 % Shock cure for 20-15 seconds at 170-180°CDry at 130°C & cure at 150°C for 3 minutesCalendar sanforize if necessary
STAGE-1 (RESIN FINISH)40-60 g/l Arkofix-NEC liq6-12 g/l Magnesium chloride20 g/l Ceraperm-MW liq conc20 g/l Sandolube-SVN
Pad cold with 70-80 % pick upShock cure at 170-180°C for 15-20 secondsSTAGE-2 (WASHING)
0.5 g/l Sandoclean PC liqOpen width wash at 40°CrinseSTAGE-3 (TOP FINISH)
10 g/l Ceraperm-MW20 g/l Solusoft-UP0.5 g/l Acetic acid
Pad cold with 70-80 % pick upDry at 120°CSanforize if necessary.
STAGE 1 (RESIN FINISH)40-60 g/l Arkofix-NEC 6-9 g/l Magnesium chloride20 g/l Ceraperm-MW liq conc20 g/l Sandolube-SVN
Pad cold with 70-80 5 pick upShock cure for 20-15 seconds at 170-180°C
STAGE 2 (WASHING OFF)0.5 g/l Sandoclean PC
open width wash at 40°CDry at 120°CCalendarSteel on paper roller160°C,100 daN/cmOrSanforize.
STAGE 1 ( PREFINISH WITH PERMENANT SILICONE SOFTENER)
20 g/l Solusoft-UP0.5 g/l Acetic acid 60%
Pad with 70-80% pick upDry at 130°C
STAGE 2 (RESIN FINISH)
40-60 g/l Arkofix-NEC6-9 g/l Magnesium chloride20 g/l Ceraperm-MW20 g/l Sandolube-SVN1 ml/l Acetic acid 60%
Pad cold with 70-80% pick upDry at 130°CCure at 150°C for 4 minutes.
FINISHING PROCEDURE:4-6 % Milease-T0.5 % Suprex K 40
Treat at 70°C for 30 minutesDry at 120°C