Finger Wizard/F/1.0.0

Finger Wizard Fitting Instructions

Norseal Ltd, Unit 5 Regents Drive, Prudhoe, Northumberland, NE42 6PX Tel. 01661 830088 Fax 01661 830 099 norseal.co.uk

87

65

43

2

Tools

All dimensions in mm

Included: 1 x Finger Wizard

Door

DoorFrame

Gap Cover

Finger Wizard

1

1 Clean the door and door frame thoroughly.

2 With the door shut, Secure channel into the corner of the door.

3 Secure flexible cover to door frame using edge of channel as a guide for positioning.

4 Open door. Line up foot on Flexible cover to channel.

5 Locate and snap foot into channel on the door.

6 Close the door.

7 Secure the (L) shaped end to the door butting up to the back of the hinge.

8 Roll cover over the hinge and secure the (T) foot to the door frame.

Steps 7 and 8 are for Finger Wizard Full Set

For high pedestrian traffic areas, securing the Finger Wizard using panel pins could be an advantage.

Installation Essentials

Clean the door and the door framethoroughly. It is essential that surfacesare clean and free of silicone orpolish.

The channel, flexible cover and gapcover all have self adhesive strip onfaces which attach to the door anddoor frame.

Before fitting you must remove pinkcover from adhesive strip.

When securing ensure adhesive isfirmly pressed into place.

Suitable for doors with an openingangle to a maximum of 120°.

Can be easily cut to length for smallerdoor sets by using heavy duty scissors.

1

Children should never be left unsupervised.parents should always be on their guard.

8 7

Areas of Application• Suitable for fire rated and non-fire rateddoors.• Suitable for timber, steel or compositedoors.• Suitable for doors with an openingangle to a maximum of 120°.• Ideal for nurseries, schools andresidential and care homes.• Can be easily cut to length for smallerdoor sets by using heavy duty scissors.