FineShredders from Metso Waste Recycling M&J … · according to iso 2768-mk and iso 13920-be sharp...
4
FineShredders from Metso Waste Recycling M&J FineShred 1500/3500
Transcript of FineShredders from Metso Waste Recycling M&J … · according to iso 2768-mk and iso 13920-be sharp...
FineShredders from Metso Waste Recycling
M&J FineShred 1500/3500
2
M&J FineShred 1500/3500
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
REV
TITLE
DRAWING NO SHEET
PROJECT No.
SCALE:
OF
MATERIAL No: 198587
0,0 kgIN WORK
PROJECT No.
1 1
M&J FINESHRED 1500/3500FINESHREDDER DELIVERY
STANDARD
011985871:50
MATERIAL Wt.:
This Unpublished Drawing and Content is the CONFIDENTIAL PROPERTY OF METSO, protected by Trade Secret, Copyright and other laws, and may not be used, copied or disclosed without the specific written consent of METSO. If published, the following notice shall apply: © 2016 Metso A2
MATERIAL Spec.:
CUSTOMER:
LOCATION:
hrshspindler2016-09-08DATE:
DATE: 2016-09-08BDL
RVWD:
DRN:
DATE:
APPD:DK- 8700 Horsens, DenmarkVejlevej 5Metso Denmark A/S
DO NOT SCALEFIRST ANGLEPROJECTION
Glo
bal T
empl
ate
- Rev
201
6070
1
ISO
UN
RES
TRIC
TED
REV DESCRIPTION OF REVISION BY APPD DATE
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS,ANGLES ARE IN DEGREES AND MINUTES, AND TOLERANCES ARE PER TABLE BELOW.
● DIMENSIONS WITHOUT SPECIFIED TOLERANCES
ACCORDING TO ISO 2768-mK AND ISO 13920-BE
● SHARP EDGES, BURRS, WELDING SLAG, WIRES AND SPATTER MUST BE REMOVED.
● GPS ACCORDING TO EN ISO 8015
24401770 /
33612691 /
3331
3574
955
2103
1470
2130
1375
541
1552
693
5354
24401770 /
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
REV
TITLE
DRAWING NO SHEET
PROJECT No.
SCALE:
OF
MATERIAL No: 198587
0,0 kgIN WORK
PROJECT No.
1 1
M&J FINESHRED 1500/3500FINESHREDDER DELIVERY
STANDARD
011985871:50
MATERIAL Wt.:
This Unpublished Drawing and Content is the CONFIDENTIAL PROPERTY OF METSO, protected by Trade Secret, Copyright and other laws, and may not be used, copied or disclosed without the specific written consent of METSO. If published, the following notice shall apply: © 2016 Metso A2
MATERIAL Spec.:
CUSTOMER:
LOCATION:
hrshspindler2016-09-08DATE:
DATE: 2016-09-08BDL
RVWD:
DRN:
DATE:
APPD:DK- 8700 Horsens, DenmarkVejlevej 5Metso Denmark A/S
DO NOT SCALEFIRST ANGLEPROJECTION
Glo
bal T
empl
ate
- Rev
201
6070
1
ISOU
NR
ESTR
ICTE
D
REV DESCRIPTION OF REVISION BY APPD DATE
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS,ANGLES ARE IN DEGREES AND MINUTES, AND TOLERANCES ARE PER TABLE BELOW.
● DIMENSIONS WITHOUT SPECIFIED TOLERANCES
ACCORDING TO ISO 2768-mK AND ISO 13920-BE
● SHARP EDGES, BURRS, WELDING SLAG, WIRES AND SPATTER MUST BE REMOVED.
● GPS ACCORDING TO EN ISO 8015
24401770 /
33612691 /
3331
3574
955
2103
1470
2130
1375
541
1552
693
5354
24401770 /
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
REV
TITLE
DRAWING NO SHEET
PROJECT No.
SCALE:
OF
MATERIAL No: 198587
0,0 kgIN WORK
PROJECT No.
1 1
M&J FINESHRED 1500/3500FINESHREDDER DELIVERY
STANDARD
011985871:50
MATERIAL Wt.:
This Unpublished Drawing and Content is the CONFIDENTIAL PROPERTY OF METSO, protected by Trade Secret, Copyright and other laws, and may not be used, copied or disclosed without the specific written consent of METSO. If published, the following notice shall apply: © 2016 Metso A2
MATERIAL Spec.:
CUSTOMER:
LOCATION:
hrshspindler2016-09-08DATE:
DATE: 2016-09-08BDL
RVWD:
DRN:
DATE:
APPD:DK- 8700 Horsens, DenmarkVejlevej 5Metso Denmark A/S
DO NOT SCALEFIRST ANGLEPROJECTION
Glo
bal T
empl
ate
- Rev
201
6070
1
ISO
UN
RES
TRIC
TED
REV DESCRIPTION OF REVISION BY APPD DATE
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS,ANGLES ARE IN DEGREES AND MINUTES, AND TOLERANCES ARE PER TABLE BELOW.
● DIMENSIONS WITHOUT SPECIFIED TOLERANCES
ACCORDING TO ISO 2768-mK AND ISO 13920-BE
● SHARP EDGES, BURRS, WELDING SLAG, WIRES AND SPATTER MUST BE REMOVED.
● GPS ACCORDING TO EN ISO 8015
24401770 /
33612691 /
3331
3574
955
2103
1470
2130
1375
541
1552
693
5354
24401770 /
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
REV
TITLE
DRAWING NO SHEET
PROJECT No.
SCALE:
OF
MATERIAL No: 198587
0,0 kgIN WORK
PROJECT No.
1 1
M&J FINESHRED 1500/3500FINESHREDDER DELIVERY
STANDARD
011985871:50
MATERIAL Wt.:
This Unpublished Drawing and Content is the CONFIDENTIAL PROPERTY OF METSO, protected by Trade Secret, Copyright and other laws, and may not be used, copied or disclosed without the specific written consent of METSO. If published, the following notice shall apply: © 2016 Metso A2
MATERIAL Spec.:
CUSTOMER:
LOCATION:
hrshspindler2016-09-08DATE:
DATE: 2016-09-08BDL
RVWD:
DRN:
DATE:
APPD:DK- 8700 Horsens, DenmarkVejlevej 5Metso Denmark A/S
DO NOT SCALEFIRST ANGLEPROJECTION
Glo
bal T
empl
ate
- Rev
201
6070
1
ISOU
NR
ESTR
ICTE
D
REV DESCRIPTION OF REVISION BY APPD DATE
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS,ANGLES ARE IN DEGREES AND MINUTES, AND TOLERANCES ARE PER TABLE BELOW.
● DIMENSIONS WITHOUT SPECIFIED TOLERANCES
ACCORDING TO ISO 2768-mK AND ISO 13920-BE
● SHARP EDGES, BURRS, WELDING SLAG, WIRES AND SPATTER MUST BE REMOVED.
● GPS ACCORDING TO EN ISO 8015
24401770 /
33612691 /
3331
3574
955
2103
1470
2130
1375
541
1552
693
5354
24401770 /
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
REV
TITLE
DRAWING NO SHEET
PROJECT No.
SCALE:
OF
MATERIAL No: 198587
0,0 kgIN WORK
PROJECT No.
1 1
M&J FINESHRED 1500/3500FINESHREDDER DELIVERY
STANDARD
011985871:50
MATERIAL Wt.:
This Unpublished Drawing and Content is the CONFIDENTIAL PROPERTY OF METSO, protected by Trade Secret, Copyright and other laws, and may not be used, copied or disclosed without the specific written consent of METSO. If published, the following notice shall apply: © 2016 Metso A2
MATERIAL Spec.:
CUSTOMER:
LOCATION:
hrshspindler2016-09-08DATE:
DATE: 2016-09-08BDL
RVWD:
DRN:
DATE:
APPD:DK- 8700 Horsens, DenmarkVejlevej 5Metso Denmark A/S
DO NOT SCALEFIRST ANGLEPROJECTION
Glo
bal T
empl
ate
- Rev
201
6070
1
ISO
UN
RES
TRIC
TED
REV DESCRIPTION OF REVISION BY APPD DATE
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS,ANGLES ARE IN DEGREES AND MINUTES, AND TOLERANCES ARE PER TABLE BELOW.
● DIMENSIONS WITHOUT SPECIFIED TOLERANCES
ACCORDING TO ISO 2768-mK AND ISO 13920-BE
● SHARP EDGES, BURRS, WELDING SLAG, WIRES AND SPATTER MUST BE REMOVED.
● GPS ACCORDING TO EN ISO 8015
24401770 /
33612691 /
3331
3574
955
2103
1470
2130
1375
541
1552
693
5354
24401770 /
SPECIFICATION 1500 3500Overall dimensions with standard hopper (LxWxH) mm 5354 x 2693 x 2042 5354 x 3363 x 2042Weight (total included standard conveyor ton 18.0 22.0Standard color RAL 9002 RAL 9002Assembly of knives on the knife holder Bolted Bolted
Knives infoNumber pr shaft pcs 72 108Number counter cut pcs 46 70WSC 40 W. Nr. 1.2379 / X155CrMoV121 (57 - 59 HRC) mm 40 x 40 x 12 40 x 40 x 12WSR 40 W. Nr. 1.2379 / X155CrMoV121 (57 - 59 HRC) mm 40 x 40 x 12 40 x 40 x 12WHC 40 Carbide (64 - 66 HRC) on tip mm 40 x 40 x 12 40 x 40 x 12WHR 40 Carbide (64 - 66 HRC) on tip mm 40 x 40 x 12 40 x 40 x 12
Capacity per hour (Presorted. Guide values only) 1500 3500Output size mmPlastic foils ton/hourPET ton/hourHard plastic ton/hourAluminum ton/hour
10 20 30 50 80 10 20 30 50 801.0 1.5 2.0 3.5 4.0 2.0 3.0 4.0 5.0 7.02.0 3.0 4.0 5.0 6.0 3.0 4.0 5.0 7.0 9.04.0 5.0 6.0 7.0 9.0 6.0 7.0 9.0 11.0 13.03.0 3.5 4.5 5.5 8.0 4.5 5.0 7.0 8.0 10.0
3
M&J FineShred 1500/3500
Shafts 1500 3500Number of shafts pcs 1 1Length / diameter mm 1336 / 665 2014 / 665Number of knives pcs 72 108Standard rotating speed rpm 100-280 100-280
Power pack 2 x 110 kW 2 x 132 kWOverall dimensions (LxWxH) mm 3331 x 1470 x 1770 3331 x 1470 x 1770Weight exclusive hydraulic oil ton 3.6 4.1Service area minimum recommended mm 1000 1000Cooling capacity kW 80 80Effect kW 2 x 110 2 x 132Drive principle Double hydrostatic transmission Double hydrostatic transmission
Self-centering knife holders
Shock resistant knife holders
Cutting tolerance of 0.3 mm No pressure generated in screen section
Large cutting area
Hydraulic drive
Screen size ø10 to 100 mm
Large effective screen area
Pressure regulated pusher/feeder
Variable shaft speed
Multi edged shaft
www.metso.com/recycling
We reserve the right to make changes and improvements without notice, ”M&J FineShred 1500-3500”. January 2017
For more information, contact your local Metso Waste Recycling representative, or contact your dealer directly.
Metso Denmark A/S Vejlevej 5 DK-8700 Horsens Denmark Tel: +45 7626 6400 Fax: +45 7626 6449 [email protected]
