Finalgeo part1

12
SCHOOL OF ARCHITECTURE, BUILDING & DESIGN Centre for Modern Architecture Studies in Southeast Asia (MASSA) BUILDING SCIENCE 1 Case Study: Identifying innovative passive design strategies Project: GEO Building Architect: Ruslan Khalid Assiociates Tutor : Miss Suja Name IC/MyKad No Student ID No 1 Fam Li Kian 950101135270 0310639 2 Leong Carmen 930819086182 0314953 3 Kian Soon Jean 930318105920 0314978 4 Wong Jian Kai 940304015675 0314794 5 Yiew Qunhe 940920015839 0314809 6 Yaseen Fatima Syed bn806368 0309021

Transcript of Finalgeo part1

SCHOOL OF ARCHITECTURE, BUILDING & DESIGN Centre for Modern Architecture Studies in Southeast Asia (MASSA)

BUILDING SCIENCE 1

Case Study: Identifying innovative passive design strategies

Project: GEO Building

Architect: Ruslan Khalid Assiociates Tutor : Miss Suja

Name IC/MyKad No Student ID No

1 Fam Li Kian 950101135270 0310639

2 Leong Carmen 930819086182 0314953

3 Kian Soon Jean 930318105920 0314978

4 Wong Jian Kai 940304015675 0314794

5 Yiew Qunhe 940920015839 0314809

6 Yaseen Fatima Syed bn806368 0309021

Page | 2

CONTENT INTRODUCTION PAGES

General information 3

Building Green Design Strategies 4-5

Orthographic Drawing 6-7

Climate Data 8-9

i. Temperature

ii. Relative Humidity

iii. Psychrometric Chart

Wind Speed and Direction 10-11

Sunpath & Lighting 11-12

i. Shadow Range Diagram

ii. Annual Sunpath

iii. Daily Sunpath Diagram

PASSIVE DESIGN FEATURES

Basic Building Design 13-17 i. Build Orientation ii. Building Configuration iii. Insulation

Windows and Roof light 18-20 i. Window ii. Roof light

REFERENCE 21

Page | 3

INTRODUCTION

The GEO building shows implementation of integrated design concepts, where active and passive

energy systems are interwoven into the building itself, and where several building elements also

serve as energy systems. This helps in bringing the extra costs of the building down. Advanced

computer design tools have been used throughout the design process. Designed at a time when the

awareness of building green is still at its infancy in this country, its energy efficient features scored

full points under the Energy Efficiency and Innovation criteria of the GBI.

Project Information

Type: Low Carbon Emission Office

Location: Bandar Baru Bangi

Climate Zone: Tropical

Site Area : 2 hectares

Building Gross Area : 4,000 m2

Height : 47.50 metres

Number of Rooms : 41 rooms

(Yoong, 2008, p. 67)

Design Philosophy The sustainable green building for today and the future.

Certification Pusat Tenaga Malaysia (Malaysia Energy Centre) is

previously known as ZEO (Zero Energy Office)

Building - officially Malaysia’s first Green Building

Index (GBI) Certified Building. Currently, it is known

as GEO (Green Energy Office) Building. It is also

Malaysia’s first completed green-rated office

building. (Pusat Tenaga Malaysia, 2008)

Page | 4

BUILDING GREEN DESIGN STRATEGIES

The building is lit primarily by daylight, supplemented by electric lighting only during very dark and

overcast periods. Extensive active energy efficiency measures are implemented in the building in

order to reduce the need for electricity to an absolute minimum, without compromising the request

for comfortable temperature and humidity and adequate lighting. These measures include among

others high efficiency pumps and fans, and use of energy efficient office equipment.

The GEO with its many innovative EE features is calculated to consume very little fossil fuels with a

designed building energy index ( BEI) of 65kWh/m2 year. Compared with others conventional office

building of 250-300 kWh/m2 year, GEO has proven its strategies. (Pusat Tenaga Malaysia, 2008)

The use of Renewable Energy ( RE) is also the significant feature of itself. The building incorporates

BiPV system which is architecturally and aesthetically integrated into building design.

GREEN DESIGN FEATURES: (Pusat Tenaga Malaysia, 2008)

- Daylighting (Basic Building Design) :Building uses diffused daylight for 100% natural daylighting.To take advantage of this diffused daylight, building is strategically positioned to ensure that most of its windows face north and south, in order to avoid direct sunlight and extensive heat gain. - Cooling and Energy Efficient Ventilation System: This system is made up of 50% radiant cooling and 50% air cooling (convection) system. The radiant cooling is achieved by the use of floor slab cooling where cold water polyethylene crosslink piping are embedded into the floors. - River Roof :Acts as the cooling tower or heat sink system for the building. It discharges heat into the ambient temperature ultilising the cool night sky radiation, 10-20 degree Celcius. -Building Integrated Photovoltaic System ( BIPW) : This system provides 50% of the electricity the building needs. The solar system provide up to 120,000 kWh/year of energy. -Rain Water Harvesting :The rain water is harvested to help conserve water in the building and reducing the use of treated water from utility. It used for cooling system condenser side, watering the landscaping and for general cleaning purposes.

Page | 5

AIR QUALITY

The perfect quality of air was achieved via the process of dehumidification. A single air handling unit

(AHU) is used for circulating the cool fresh air within the building and also for dehumidification

purposes. Dehumidification of air quality in buildings consumes a great amount of electricity; hence

a green tower is introduced.

The green tower, is a modular cooling tower that uses absolutely no electricity to power the fan. It

instead uses the water flow and pressure, that is already present in the processes. The tower runs at

a greater efficiency, as it replaces incoming humid fresh air with cooler air.

GREEN COOLING TOWER

MAIN CONTRIBUTORS TO LOW ENERGY CONSUMPTION

An energy efficient building envelope with energy efficient double glazing and well insulated

walls and roofs.

Use of daylight as the only source of lighting during daytime.

Use of energy efficient office equipment

Page | 6

ORTHOGRAPHIC DRAWING

SITE PLAN (Derived from Google Map)

Location : Section 9, Bandar Baru Bangi, Bangi, Selangor

Page | 7

SECTION

FLOOR PLAN

Page | 8

CLIMATE DATA TEMPERATURE

Over the course of a year, the maximum daily temperature typically varies from 31 D.C. to 32 D.C.

whereas the minimum daily temperature typically varies from 24 D.C. to 24.5 D.C.

RELATIVE HUMIDITY

The relative humidity typically ranges from 77% to 90% over the course of the year.

0

5

10

15

20

25

30

35

Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec

Annual (2013) Temperature for Sepang, Malaysia

Average Maximum Temperature (Degree Celsius)

Average Minimum Temperature (Degree Celsius)

72

74

76

78

80

82

84

86

88

Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec

Annual (2013) Relative Humidity for Sepang, Malaysia

Average Relative Humidity (%)

Page | 9

ANALYSIS

A RH of 100% denotes a foggy, wet, and saturated atmosphere. Levels below 40% RH suggest

dryness while levels above 80% RH suggest high presence of moisture. Between 40% and 80% RH, it

is a comfortable environment if the temperature is also comfortable. According to the chart above,

Sepang’s climate is rather humid as RH levels are mainly above 80% RH.

PSYCHROMETRIC CHART (Derived from Ecotech 2011 software)

This Psychrometric chart shows that Malaysia's dry bulb temperature is around 10-35 °C ,

which included the comfort zone . Moreover , absolute humidity (AH) is laid between 3-13

(g/m3), which included the comfort zone as well .

Page | 10

WIND SPEED AND DIRECTION (Derived from Ecotech 2011 software)

The wind speed and direction can be analysed using the diagram below.

Basically, winds come from all direction and the stronger winds are moving in from the

South-West direction , while winds blow higher frequency from South-East.

Page | 11

SUNPATH & LIGHTING (Derived from Ecotech 2011 software)

SHADOW RANGE DIAGRAM

0800-1200

1200-1700

Page | 12

ANNUAL SUNPATH DIAGRAM

DAILY SUNPATH DIAGRAM

0700 0900

1100 1300

1500 1700