Final Drive & Axle Oil
Transcript of Final Drive & Axle Oil
-
8/13/2019 Final Drive & Axle Oil
1/2
PRODUCT
DATA SHEET
Page 1 of 2 1/30/2013With continual research and development, Bel-Ray Company, Inc. reserves the right to change the information
contained herein. The Company is not responsible for misuse or misapplication of its products.
Bel-Ray Company, Inc. P.O. Box 526 Farmingdale, NJ 07727 USA
TEL +1 732-938-2421 FAX +1 732-938-4232 www.belray.com
FINAL DRIVE AND AXLE OIL
Final Drive and Axle Oil is a high performance lubricant designed to optimize the performance
of drive trains of off-highway vehicles. Final Drive and Axle Oil SAE 50 and 60 are formulatedfor final drives and differentials where lubrication of heavily loaded gears and bearings is the main
consideration. Final Drive and Axle Oil is not recommended for use in gear drives where
frictional materials are used. The use of Final Drive and Axle Oil, in combination withHeavyDuty Diesel Engine Oil in the engine andMolylube 5% Moly Extreme Pressure Grease AC or
Molylube 5% Moly Extreme Pressure Grease LCin the centralized lubrication system,
provides a total lubrication package of unsurpassed wear control, extended drain intervals andreduced consumption for a significant improvement in cost effectiveness.
Applications
Final drives and differentials of equipment where Caterpillar FD-1 fluid are recommended Final drives and differentials where Caterpillar TO-4 type oils are recommended or currently
in use
Features and Benefits
Superior Extreme Pressure Protects gears and bearing that are subject to extreme
loads. Extends component life.
Thermal stability Protects against oxidation. Will not break down in hightemperature service. Minimizes vanish and sludgeformation. Extends drain intervals.
Corrosion resistance Protects parts against rust and corrosion even during
humid idle conditions.
Shear stable formula Maintains viscosity and maximum protection even
under high shear conditions.
General Description
Final Drive and Axle Oilis heavy-duty drive train oil formulated for use where Caterpillar FD-1
fluids are required. Final Drive and Axle Oils ultimate additive and base oil technology willdeliver exceptional performance, significantly reducing gear and bearing wear and extending oil
service life in extremely harsh operating environments.
Product No. 79660, 79650
-
8/13/2019 Final Drive & Axle Oil
2/2
Page 2 of 2 1/30/2013With continual research and development, Bel-Ray Company, Inc. reserves the right to change the information
contained herein. The Company is not responsible for misuse or misapplication of its products.
Bel-Ray Company, Inc. P.O. Box 526 Farmingdale, NJ 07727 USA
TEL +1 732-938-2421 FAX +1 732-938-4232 www.belray.com
FINAL DRIVE AND AXLE OIL
TYPICAL PROPERTIES
Product No. 79660 79650
SAE Engine Oil Grade 50 60
Viscosity, ASTM D445
@ 40C, cSt
@ 100C, cSt
208
18.0
314
23.5
Viscosity Index, ASTM D2270 94 94
Pour Point, ASTM D97C
(F)
-24
(-11)
-18
(0)
Copper Strip Corrosion, ASTM D1303 hrs @ 150C, rating 1a 1a
Foam Test, Dry and Wet (with 0.1% water), ASTM D892Sequence I, ml/ml
Sequence II, ml/ml
Sequence III, ml/ml
0/0
0/0
0/0
0/0
0/0
0/0
Falex EP Test, ASTM D3233 Method B
Non-seizure Load, lbf 3000 3000
Timken EP Test, ASTM D2782
OK Load, kg (lb) 29.5 (65) 29.5 (65)
Flash Point, ASTM D92
C
(F)
228
(442)
238
(460)
Specific Gravity, ASTM D1298, 60/60F 0.908 0.918
Color Amber Amber