FIN400 Production Line

download FIN400 Production Line

of 5

Transcript of FIN400 Production Line

  • 7/28/2019 FIN400 Production Line

    1/5

    Quotation for FIN-400 Fried Instant Noodles Production Line

    (Make in China, Japanese Fuji Technology)

    I. ProcessSalt, alkali, water

    Raw material (wheat flour)Mixingagingcompound rollingcontinuous rollingcut into

    shapesteamingcutting, folding and dividing the noodlefryingarrangingcooling

    dividinginspecting and conveyingpackingfinished products

    II. Technical Parameter of FIN-400 fried instant noodle line

    1. Output: 90,000cakes/8h, 653g-803g/cake (noodle size is decided by both partiesafter discussion)

    2. Power: ~85.5kw(without packing part),

    Bag packing power: 15kw; cup packing power: 57kw;

    3. Steam Consumption ~2000Kg/h

    4. Area cover:90M(L) x6.0M(W) x8M(H)

    5. Operators: Noodle processing: 5-6,

    6. Length of roller: 400mm.

    7. Cutting speed; 0~55cuts/min(speed suggested:47cuts)

    8. Mixing time; ~15min.

    9. Steaming time; 120S

    10. Frying time; 90S.

    11. Cooling time; ~140S.

    III Equipments List

    1. .SCREENING SIEVE: 1 UNIT

    Function: this machine can screen flour with high granularity precision,

    which can separate impurities and flour continuously.

    specification: 1000350mm

    Material: body: SUS304, frame: carbon steel

    power: 1.5kw

    2. FLOUR CONVEYING SYSTEM:

    Function: this machine can convey the after sieved flour by air evenly

    and then convey it to flour storage tank.

    Characteristics:

  • 7/28/2019 FIN400 Production Line

    2/5

    Its of high capacity, which is easy to maintain and easily to be located

    according to factorys size. Besides, flour input can be located separately

    and easy to be clean and maintained.

    Main parts: quantitative storage tank: 9501160

    mmvolume:200kg/time, body: SUS304, frame: steel, power: 1.5+5.5kw,

    screening machine: 0.25kw.

    Complete with air closing switch, powder input, pipes and air filtrating

    device and air valves.

    3. Alkali Water Tank: 1 unit

    Service capacity: 1500L

    Tank body Material:: SUS3161.5mm,Single mixing shaft: SUS316;supporting

    base:SUS304, mixers motor: 0.55kw, pump: 0.55Kw, 1 unit;

    4. Quantitative Liquid Adding Device: 1 unit

    Specification: volume: 1.5m, Tank body: SUS3161.5mm, complete with level displayer,

    connecting pipe, vales and pneumatic valve; supporting base:SUS304, liquid adding pump

    power: 0.55kw

    5. Dough Mixer: 2units

    Specification: 2980900950

    adding quantity: 200kg/time

    Material: mixer tank: SUS304#3.0mm thick; mixer shaft, mixing blade, and

    discharge gate are all made of SUS304, utter shell: SUS304; complete with frame,

    driving components: steel; the discharging door can be automatically opened (the air

    compressor is prepared by customer);

    Motor: 6.5/8 kw: 1 unit, with speed reducer and frequency transducer.

    6. Aging Feeder: 1unit

    Specification: dough pan: 1800430mm ,

    The bucket body of the round dough pan :1.5mm:

    Discharging gate, feeding rod: SUS304; Supporting frame: common steel with spray-

    paint; rotating speed: 3RPM,

    Driving motor: 1.1kw, with speed reducer.

    7. Compound Roller: 1 unit

    Specification: 300015301300mm . Altogether: 3 pairs of alloy steel rollers, of

    which the specification is 250400(W) mm for roller,; 300400(W) mm for roller

  • 7/28/2019 FIN400 Production Line

    3/5

    ;

    Noodle sheet conveying belt: compound plastics fiber belt

    Outer shell and sealing board: SUS3041.0mm; wall board: steel; frame and feet:

    SUS304 square pipe, motor: 5.5kw, with frequency transducer and photoelectric control

    to adjust speed.8. Continuous Roller: 1 unit

    Specification: 47509321230, Material: alloy steel, roller, 6 pairs of alloy steel rollers

    with the following dimensions:

    250400 (W)mm for roller I,

    216400 (W)mm for roller II, III

    165400 (W)mm for roller IV V,

    155400 (W)mm for roller

    Driven by frequency transducer.

    Noodle cutter: 1 pair of 1.375mm and 1 pair of 1.25mm.

    2 sets of Forming case and one set of forming device: SUS304

    side board of press roller: edible PP rigid plastic; wall board: A3 chrome plating, frame:

    sealing board for frame: SUS3041.0mm; frame: steel, base: SUS304 square pipe

    6 motors plus speed reducer: 1.5 kW3+2.2 kW2+4 kw, with frequency transducer and

    photoelectric control to adjust speed. 9. Steamer: 1 unit,

    Specification: 180007801050mm, effective length: 18000mm

    Material:

    Conveying belt and supporting chain: SUS304, tunnel shell and C2052 chain: SUS304,

    enforced frame: steel,There is thermal layer inside the steamer and cooling parts in 1m of the front section and

    2.5m of the rear section.

    Cooling fan: 0.3kw2

    Inside the steamer, 2 units of SUS30442mm steam injection pipe, of which the flow rate

    is adjusted by valve.

    inner layer of steamer shell: SUS3041.2mm; outer layer of steamer shell:

    SUS3041.0mm;

    The entire chain track: 40mm40mm3mm, damp discharging pipes, supporting feet:

    SUS304, double metal temperature meter: 2 units, steam pressure displayer: 1 set.

    Cylinder choke valve: 3 units and cover lifting motor: 1.5kw

    10. Cutting folding and dividing machine: 1 unit

    Specification:900+280014001830mm, rolling ways; 0-55times/min; outer shell:

    SUS3041.0mm; Frame: SUS3046.0mm; Driving shaft: SUS304, base feet: steel,complete with speed reducer and motor: 1.5kw2 , which is driven by PLC and encoder.

    11. Fryer: 1 unit

    Specification: 1190017501560+2800mm; frying pan is made of SUS304 complete

    with auto-lifting device and retractile smoke discharge pipes.

    Main parameters:

    Frying time: 90s, oil temperature: 125-155, steam pressure: 0.8-1.0MpaFrame: A3 steel with spray-paint, bracket: A3 steel with spray-paint; smoke pipe: 1.0mm

  • 7/28/2019 FIN400 Production Line

    4/5

    frying boxes:8 lattices/lane, chain box and lid aremade of SUS304; thicken chain: C2052with stainless steel; Shield: SUS4301.0mm; Bracket: paint steel.

    Oil heating system:

    Heat exchanger: 80 : 1 set, 1 unit of cycling oil pump: 11kw, dreg filtrating

    machine:0.55kw, 1 unit of gear pump: 1.5kw, 1 unit of oil adding pump,:1.5kw 1 unit oiltank 3.0m3 SUS3042mm ;1unit of lifting motor: 2.2kw

    Complete with electric adjusts valve; pipes and valves and etc accessory; driven speed

    reducer and motor: 2.2kw, which is controlled by PLC and encoder.

    12. Oil Filtrating Device:

    Specification: 1200540795mm air collecting device: SUS304 fan: stainless

    steelmotor:1.1 kw2.

    13. Cooling Arranging conveyor: 1 unit

    Specification: 1235012241600mm, cooling fan: 4kw2+5.5kw, rod arranging style

    conveying, supporting and leading chain: SUS304. C2052stainless steel chain, frame and

    shield are all made of SUS304. Driving components are stainless steel, drive speed

    reducer and motor: 075kw, which is controlled by PLC and encoder synchronously.

    14. Box Exchanging Device:

    Specification: 40001624950mm, frame is stainless steel. This part is driven by cooler.

    15. Dividing Conveyor: 1 unit

    Specification: 22501224980mm, conveying belt: PU polyurethane, frame and driving parts

    are stainless steel. Driven speed reducer and motor: 0.55kw.

    16. S-style Checking Conveyor: 2units

    Specification: 3000186850mm. CC18SB flat top chain, frame: SUS304; driven wheel:

    PP plastics, driving shaft: stainless steel, speed reducer and motor: 0.55kw.17. Electric control panel (without packing part): 4 units

    Use PLC and encoder to control the whole production line synchronously without

    packing process. Encoder: Guangyang, touch screen: Siemens, Breaker: Schneider, Heat

    Relay, AC Contactor, Frequency Transducer: Mitsubishi or Fuji.

    IV Quotation(FOB Guangzhou)

    Total price for the line of FIN-400: USD315,700

    Note: the quotation is available for 30 days.

    VOthers

    1.Payment Terms:

    1). 40% of the TOTAL AMOUNT under THE CONTRACT should be paid by T/T to the

    designated account of Party A as down payment within 10 working days counting from

    the date of signing this Sales Contract.

    2). 60% of the TOTAL AMOUNT under THE CONTRACT for the Fried Instant Noodle

    Production Line should be paid by T/T to the designated account of Party A within 10

    working days counting from the date of receiving the notice of Equipments finished.

    Project Implementing and Relative Items1. Cycle for manufacturing the production line: 120 working days (not include the legal

  • 7/28/2019 FIN400 Production Line

    5/5

    holidays); Time for installation and commissioning: 30~40 working days.

    2. Shipment terms: Buyer should arrange the shipment and pay the freight. If indeed has

    the difficulty, we can manage this for the buyer, but the buyer should pay for any expense

    occurred.

    3. Right and Responsibility: Both Party should abide the sales contract seriously,otherwise, would take the responsibility for breach of the CONTRACT. If any normal

    technology improvement happened or any equipment changed, both parties should

    inform each other by written notice in time.

    Installation, Adjustment, Training and Maintenance.

    1. Free charge of installation and commissioning of the EQUIPMENT: the seller will

    dispatch technicians (2~3) to supervise and guide the installment and adjustment of the

    EQUIPMENT. Expenses for Visa, food, accommodation and traffic (including round-trip

    from Guangzhou to the installation & commissioning spot and local traffic) to be

    occurred to the technicians shall be on Party Bs account. Party B shall provide the work

    subsidies of USD30.00/day (SAY US DOLLAR THIRTY ONLY) per technician and be

    responsible for the local insurance and tax of the technicians.

    2. Project installation guide and training: The buyer has fully prepared for the installation

    and commissioning of the EQUIPMENT under the contract, then seller will send

    technicians to the spot for installation, during the installation and commissioning, the

    technicians will guide and train the workers.

    3. Warranty service period for the production line is ONE YEAR. After the guarantee period, the buyer

    should pay for the maintenance events and any technical improvement. Any big machinery technical

    improvement and changes shall be negotiated by both parties amicably and confirmed by another

    agreement.Guangzhou Cereals Scientific Research Institute

    South Food Machine Development Center

    2012-6-1