Filtration Filter Membrane Compatibility Chartv~Filtration_Products... · Filtration Filter...

Toll Free: 1-888-226-2775 E-mail: [email protected] Web: www.lifescience.ca440

Filtration

Filter Membrane Compatibility ChartFilter Membrane Chemical Compatibility Chart

Chemical

noly

N

EF

TP

FD

VP

esol

ulleC

detarene

geR

AcidsAcetic, 25% L C C CAcetic, Glacial L C C CFormic, 25% N C C CHydrochloric, 25% L C C CHydrochloric, Concentrated N N C CSulfuric, 25% N C C CSulfuric, Concentrated N C L LNitric, 25% N C L CNitric, Concentrated N C L NPhosphoric, 25% N C C CTrichloroacetic, 10% L C C C

BasesAmmonium Hydroxide, 25% C C L —Sodium Hydroxide, 3 Normal C C C —

AlcoholsAmyl Alcohol C C C CBenzyl Alcohol C C C CButyl Alcohol C C C CEthanol, 70% C C C CEthanol, 98% C C C CEthylene Glycol C C C CGlycerine (Glycerol) C C C CIsopropanol C C C CMethanol, 98% C C C Cn-Propanol C C C CPropylene Glycol C C C C

HydrocarbonsBenzene C C C CHexane, Xylene C C C CKerosene, Gasoline C C C CTetralin, Decalin C C C —Toluene C C C C

Halogenated HydrocarbonsCarbon Tetrachloride C C C CChlorobenzene (Mono) C C C CChloroform L C C CFreon C C C CMethylene Chloride L C C CTrichloroethane C C C CTrichloroethylene C C C C

Filter Membrane Chemical Compatibility Chart

Chemical

noly

N

EF

TP

FD

VP

esol

ulleC

detarene

geR

KetonesAcetone C C N CCyclohexanone C C N CIsopropylacetone C C N —Methyl Ethyl Ketone C C L CMethyl Isobutyl Ketone (MIBK) C C N C

Esters2-Ethoxyethyl Acetate L L L CAmyl Acetate C C C CBenzyl Benzoate C C — CButyl Acetate C C C CEthyl Acetate C C C CIsopropyl Myristate C C — CMethyl Acetate L C L CPropyl Acetate L N C CPropylene Glycol Acetate L C — CMethyl Cellosolve Acetate C C C CTricresyl Phosphate — C — C

Oxides — EthersAcetonitrile (Methyl Cyanide) C C C CAniline L C C CDiethyl Acetamide C C C CDimethyl Formamide C C N LDimethyl Sulfoxide (DMSO) L C C LDioxane C C L LEthyl Ether C C C CIsopropyl Ether C C N —Pyridine C C L C

Solvents with NitrogenTetrahydrofuran C C L LTriethanolamine C C C C

MiscellaneousFormaldehyde Solution, 30% C C C LHydrogen Peroxide, 30% N C C CPhenol, Aqueous, 10% N C L CSilicone Oil and Mineral Oil C C C C

LEGEND - C=Compatible, L=Limited Compatibility, N=Not Compatible, =No Data Available, PTFE=Teflon®, PVDF=Polyvinyledene Difloride

Toll Free: 1-888-226-2775 E-mail: [email protected] Web: www.lifescience.ca 441

Filtration Plates

• Polystyrene and polypropylene filter plates• Long and short drip directors• Each well has an individual drainage spout ensuring

100% sample transfer• Manufactured from ultra pure grade polymer• Standard ANSI/SBS footprint• Robot friendly• Fit standard vacuum manifold

Filtration plates are used in their simplest form to remove partic-ulate matter from liquid. Either the particulate matter or the filtrateis needed for further study.

Porvair Sciences has a range of filter plates to suit most filtrationapplications. The company has optimized filter plates for appli-cations including cell harvesting, DNA separations, bindingstudies, plasmid isolation, general filtration and sample clean up.Porvair has a full range of 48-, 96- and 384-well microplates witha choice of glass fibre, nylon, PVDF or polyethylene filtrationmaterials and well volumes ranging from 350µl to 5ml.

Filtration PlatesSolvent resistant

Low Biomolecule Binding




High Biomolecule Binding



Application

YAC (Yeast Cloning Assays)DNA extraction from agarose gelDye Terminator Clean UpSequencing Reaction Clean UpDNA/RNA PurificationNi-NtaAffinity BeadStreptavidin/biotin beadChromatography beads/resinsPurified cloned receptorsCell Based Receptor BindingSignal transductionPhosphodiesteraseProtein or nucleic acid desaltCell membraneNeonatal ScreeningVesicle AssayDye Terminator RemovalDye Terminator Clean UpSequencing Reaction Clean Up

Solid Phase Extraction (SPE)

YAC (Yeast Cloning Assays)Bacterial DNA prep for PCRAluminaCell fragments/membranesWhole CellsProtease assaysPhosphodiesteraseAntibody neutralizationMammalian Cells CaptureCalcium uptakeDual assay: Ca + receptorMicrosomesSolid Phase RadioimmunoassaysDNA BindingLysate Clarification

Cell homogenates. crudeDNA BindingDNA IsolationDNA/RNA PurificationPCR Clean upPlasmid MiniprepsRecovering DNA from gelsReverse TranscriptaseSample Clean upM13 phage prepsThymidine UptakeCell homogenates, crude

Cell fragments/membranesCytotoxic/Cell ProliferationSignal transductionMammalian Cells Capture

Filter

HydrophilicPVDF 0.45µm

UHMW PE25µm

P E Frit 25µm

Polypropylene0.45µm

Glass fibre0.7µm

Glass fibre1.0µm

Glass fibre1.2µm

Drip detector

Short

Long

Short

Long

Long

Short

Long

Long

Short

Long

Short

Long

Vol (µl/well)

300400800

300400800

300400800300400800200020005000300400800

3004008002000

1404008002000300400800

300400800

140300400800140300400800

Filter bottom microplate application guide

Other filtration plates available upon request.Please contact your local sales representative.

Part No. DESCRIPTION QUANTITY PRICEPV-360047 96 Well PP, 300µL Short drip UHMW Polyethylene, MPS 25µm 50 $1095.00PV-360041 96 Well PP, 300µL Long drip UHMW Polyethylene, MPS 25µm 50 $ 990.00PV-360035 96 Well PP, 400µL Short drip UHMW Polyethylene, MPS 25µm 25 $ 534.00PV-360026 96 Well PP, 400µL Long drip UHMW Polyethylene, MPS 25µm 25 $ 534.00PV-360029 96 Well PP, 800µL Short drip UHMW Polyethylene, MPS 25µm 25 $ 720.00PV-360056 96 Well PP, 2mL Long drip UHMW Polyethylene, MPS 25µm 25 $ 757.00

Ordering Information


Syringe and Membrane Filters

Membrane Selection GuideMembrane Type Features Common Uses Hydrophilic

SolventResistance

ProteinBinding

Nylon Good chemical compatibility and verylow extractables

General filtrationsterilization, HPLC sample prep

Yes Good Medium

Polytetrafluoroethylene(PTFE)

Compatible with strong acids and aggressive solvents

Gas, air, and solvent filtration No High* High

Polyvinylidene Fluoride(PVDF)

Good flow rate characteristics.Ideal for chromatography applications.

HPLC sample preparation and general filtration

Yes High Low

Regenerated Cellulose Universal membrane with excellent chemical resistance and low extractables.Use for aqueous and organic samples.

HPLC sample prepgeneral filtration

Yes High Very Low**

*Highest solvent resistance.**Lowest protein binding.

Membrane selectionChoose a filter membrane based on the size and amount of particulate in the sample, the membrane’s chemical compatibility with the sample matrix, and potential interactions (binding) between the membrane and the sample components. This table offers general guidelines on membrane characteristics and applications.

Filter Device SelectionConsider the number of samples, the sample volume, and the filtering mechanism you prefer to use.

Syringe FiltersFiltration is achieved by pushing the sample through the membrane with a syringe or other luer-connection device. Syringe filters allow you to control the rate of flow, which can be critical with delicate samples. Syringe filters also allow you to filter into nearly any tube, vial, or column that represents the next step in your analysis.

Centrifuge Filter TubesFiltration is achieved by pulling the sample through the membrane with centrifugal force. This allows you to simultaneously filter as many samples as your centrifuge can hold, and captures your filtrate in a clean microtube.

Pre-Cut MembraneMultiple diameters offer a wide range of sample capacities, up to multiple liters. You need a filtration apparatus, such as a filter funnel or other vacuum-driven filtration device.

Device CapacitiesDescription Sample Volume

Syringe Filter Capacities4mm Syringe Filter ≤1mL13mm Syringe Filter ≤30mL17mm Syringe Filter ≤50mL25mm Syringe Filter ≤100mL30mm Syringe Filter ≤100mL

Centrifuge Filter Tube Capacities2mL Tubes 20µL to 500µL50mL Tubes 1mL to 25mL

Pre-Cut Membrane Capacities13mm Pre-Cut Membranes up to 20mL25mm Pre-Cut Membranes up to 100mL47mm Pre-Cut Membranes multi-liter


Syringe and Membrane Filters

InnoSep™Canadian Life Science Offers Affordable, Quality Syringe Filters

Housing Polypropylene housings are highly solvent resistant and exhibit low extractables. They are ideal for filtering samples orsolvents used in chromatography.

Size4mm syringe filters are useful for filtration up to 1mL of low par-ticulate level chromatography of biological samples.13mm syringe filters have a filtration area of 1.3cm2 and a hold-up volume of less than 30uL with an air purge.Ideal for samples up to 12mL.25mm syringe filters have a filtration area of 4.9cm2 and offer thefastest sample filtration.

MembraneThe cellulose acetate and polysulfone membranes are all lowprotein binding, which makes them well suited for filtration ofbiological samples.PTFE membrane in a PP housing can be used to filter solventsand strong acids.Although PTFE is inherently hydrophobic, it can be madehydrophilic by pre-wetting the membrane with methanol andthen rinsing with water.Nylon or polypropylene are ideal for filtration of chromatographysamples.Polypropylene membranes exhibit near zero extractables, arevery resistant to solvents and most chemicals and would be thefirst choice for filtration of chromatography samples.

Next to our excellent InnoSep™ line, we are distributor for the GE Osmonics transfer membranes.GE Osmonics Laboratory Products is the only manufacturer who actually produces all the membranes they sell into the tissueculture media preparation, LC sample preparation, transfer membrane and microbiological detection applications. GE Osmonics is a leading manufacturer and worldwide marketer of high-technology water purification, fluid filtration, fluidseparation and fluid handling equipment and components.

See page 440 for Filter Membrane Compatibility Chart

Material Description Features Application Pore SizeCA Internally supported

cellulose acetate• Lowest binding material available• Highest throughput• Strength and dimension stability• Uniform pore structure• Hydrophilic

• Tissue culture media sterilization• Protein & enzyme filtration sterilization• Biological fluid filtration, sterilization• Tissue culture media sterilization

0.22 - 5.0

Glass Fiber Glass fiber prefilters • Biologically inert• Available with or without acrylic binders• High dirt-holding capacity

• Gravimetric analysis• Prefilter to extend final filter life• Clarification of particulate laden solutions

0.5, 0.7, 1.0

NC Unsupported nitrocellulose mixed cellulose esters

• Consistent flow rates• High throughputs• Uniform pore structure• Hydrophilic

• Aqueous filtration• Microbiological analysis• Sterility testing• Gravimetric analysis with ashing technique• Particulate analysis

0.1 - 8.0

Nylon Internally supportednylon

• Naturally hydrophilic• Wide chemical compatibility range• Extremely low extractables• Strength and dimensional stability

• Sterilization, clarification of aqueous and organic solvent solutions

• LC sample preparation

0.1 - 20.0

PP Polypropylene • Chemically and biologically inert• Wide chemical compatibility range• Extremely low extractables

• Sterilization, clarification of organic solvent solutions

• LC sample preparation

0.1, 0.22, 0.45

PES Polyethersulfone • Low protein binding• Low extractables• Autoclavable• Wide chemical compatibility range• Strength and dimensional stability

• Tissue culture media sterilization• Protein and enzyme filtration, sterilization• Biological fluid filtration, sterilization

0.22 - 5.0

PVDF Polyvinylidene difluoride • Hydrophobic• Chemically inert towards many solvents,

similar stability to PTFE

• Filtration of polar and non-polar solutions 0.2 - 0.45

PTFE Polytetrafluoroethylene(Teflon laminated onto apolypropylene support)

• Naturally hydrophilic• Compatible with strong acids

and aggressive solvents• Improved durability and handling

• Filtration of strong acids and aggressive solvents

• Venting applications

0.22, 0.45, 1.0

Looking for filter vials? See page 505.


InnoSep™ Syringe Filters

Membrane Pore Size Part No.Price/100

25mm diameterCA 0.2µm SF5003-06 $109.00

CA 0.45µm SF5112-06 $109.00

Nylon 0.2µm SF6055-06 $ 98.00

Nylon 0.45µm SF6054-06 $ 98.00

Nylon 5.0µm SF6059-06 $ 98.00

PES 0.45µm SF5509-06 $ 98.00

PP 0.2µm SF6550-06 $ 98.00

PTFE 0.2µm SF6057-06 $ 98.00

PTFE 0.45µm SF6058-06 $ 98.00

PVDF 0.2µm SF5510-06 $109.00

PVDF 0.45µm SF5511-06 $109.00

25mm filters with glass fiber membranes

Glass Micro Fiber 0.7µm SF6052-06 $ 98.00

GF 1.0µm SF7500-06 $ 98.00

Nylon/GF 0.45µm SF7504-06 $109.00

PTFE/GF 0.45µm SF7501-06 $109.00

13mm diameter

CA 0.22µm SF6506-06 $ 95.00

CA 0.45µm SF6507-06 $ 95.00

Nylon 0.2µm SF6502-06 $ 95.00

Nylon 0.45µm SF6503-06 $ 95.00

PTFE 0.2µm SF6500-06 $ 95.00

PTFE 0.45µm SF6505-06 $ 95.00

PVDF 0.45µm SF6504-06 $ 99.00

InnoSep™ Syringe Filters• High quality filter with protective anti-burst ring• Available in 13mm and 25mm• Polypropylene housing for increased

solvent resistance• Available in nylon, PTFE, polypropylene,

polyethersulfone, cellulose acetate, nitrocellulose mixed esters, glass fibre and PVDF

• Some filters are available with glass pre-filter

InnoSep™ Syringe Filters are available in a select number of filter media, diameters and pore sizes.Please contact us for ordering information on items not shown.



Syringe Filters - CHROMAFIL® Xtra

CHROMAFIL® XtraDisposable syringe filters CHROMAFIL® Xtra are ready-to-usefiltration units, which are filter elements incorporated in apolypropylene housing. Because every filter is only used once,contaminations are avoided.

Membrane Pore Size Part No.Price/100

25mm diameter

GF 1.0µm MN729228 $109.00

PA (Nylon) 0.2µm MN729212 $109.00

PA (Nylon) 0.45µm MN729213 $109.00

PES 0.45µm MN729241 $109.00

PET 0.45µm MN729220 $109.00

PTFE 0.2µm MN729207 $109.00

PTFE 0.45µm MN729205 $109.00

PVDF 0.2µm MN729218 $125.00

PVDF 0.45µm MN729219 $125.00

RC 0.2µm MN729230 $109.00

RC 0.45µm MN729231 $109.00

Part No. Description Quantity Price

CR186603 3 mL Disposable Syringe 100 $ 41.40CR186605 5 mL Disposable Syringe 100 $ 50.60CR186610 10 mL Disposable Syringe 100 $ 57.50CR186620 20 mL Disposable Syringe 100 $ 87.60

Disposable SyringeThese disposable syringes are useful for sample preparation,especially when used with our syringe filters. Syringes aremade from polypropylene and polyethylene and aresilicone-free.Extractables are minimized compared with rubber-tippedplunger syringes. Syringes are individually wrapped in sterile“peel packs.”




Microfiltration Spin Filters, Receiver Tubes

Micro-Spin Centrifuge Filters- Sample volumes of 20µl to 850µl

Midi-Spin Centrifuge Filters - Sample volumes of 4mL to 7mL

Maxi-Spin Centrifuge Filters - Sample volumes of up to 24mL

Part No. MembranePrice/25

CMBNY02 .2µm Nylon $ 57.00 CMBPE02 .2µm PES $ 57.00 CMBPV02 .2µm PVDF $ 66.00 CMBRC02 .2µm RC $ 57.00 CMBPT02 .2µm PTFE $ 66.00 CMBCA02 .2µm CA $ 57.00 CMBCA45 .45µm CA $ 57.00 CMBNY45 .45µm Nylon $ 57.00 CMBRC45 .45µm RC $ 57.00 CMBPT45 .45µm PTFE $ 66.00 CMBPE45 .45µm PES $ 57.00 CMBPV45 .45µm PVDF $ 66.00


CMCINY02 .2µm Nylon $ 80.00 CMCIPE02 .2µm PES $ 80.00 CMCIPV02 .2µm PVDF $ 91.00 CMCIRC02 .2µm RC $ 80.00 CMCIPT02 .2µm PTFE $ 91.00 CMCIPP02 .2µm PP $ 80.00 CMCICA02 .2µm CA $ 80.00 CMCICA45 .45µm CA $ 80.00 CMCINY45 .45µm Nylon $ 80.00 CMCIRC45 .45µm RC $ 80.00 CMCIPT45 .45µm PTFE $ 91.00 CMCIPE45 .45µm PES $ 80.00 CMCIPV45 .45µm PVDF $ 91.00 CMCIPP45 .45µm PP $ 80.00

Ordering Information - Micro-Spin800µL capacity with 2.0mL receiver tubes, non-sterile

Ordering Information - Midi-Spin4mL capacity with 7.0mL receiver tubes, non-sterile


CMXNY02 .2µm Nylon $ 86.00 CMXPE02 .2µm PES $ 86.00 CMXPV02 .2µm PVDF $ 95.00 CMXRC02 .2µm RC $ 86.00 CMXPT02 .2µm PTFE $ 95.00 CMXPP02 .2µm PP $ 86.00 CMXCA02 .2µm CA $ 86.00 CMXCA45 .45µm CA $ 86.00 CMXNY45 .45µm Nylon $ 86.00 CMXRC45 .45µm RC $ 86.00 CMXPT45 .45µm PTFE $ 95.00 CMXPE45 .45µm PES $ 86.00 CMXPV45 .45µm PVDF $ 95.00 CMXPP45 .45µm PP $ 86.00

Ordering Information - Maxi-Spin25mL capacity with 50mL receiver tubes, non-sterile

Receiver TubesAdditional plastic products offered include DNASE/RNase freereceiver tubes in various sizes. Receiver tubes can be packaged with spin filters orseparately.

1.5mL

2mL, No-Cap

2mL, with cap

50mL

Part No. Membrane Quantity Price

CM153-00 2.0mL with cap 5,000 $ 233.00 CM152-BK 2.0mL no cap 5,000 $ 233.00 CM158-00 1.5mL with cap 5,000 $ 233.00 CM176-00 0.5mL with cap 5,000 $ 233.00 CM184-00 50mL with cap 500 $ 148.00



Membrane Filters

Nylon• Naturally hydrophilic• Wide chemical compatibility range,

organic solvent resistance (exceptacids and bases)

• Internally supported• Strength and dimensional stability• High binding capacity, high dirt loading capacity• Available in gridded and 1+ PK for testing

Cellulose Acetate (CA)• Lowest binding material available• Hydrophilic• High throughput• Strength and dimension stability• Uniform pore structure

Polytetrafluoroethylene (PTFE)• Naturally hydrophilic• Compatible with strong acids

and aggressive solvents• Improved durability and handling

Polyethersulfone (PES) Membrane• Very low protein binding• Fast flow rates, high throughput• Low extractables• Wide chemical compatibility range• Strength and dimensional stability• Autoclavable

Nitrocellulose Mixed Cellulose Ester (ME)• Consistent flow rates• High throughput• Uniform pore structure• Hydrophilic

Polyvinylidene Difluoride (PVDF)• Hydrophobic• Suitable for filtration of polar

and non-polar solutions• Chemically inert towards many

solvents, similar stability to PTFE

InnoSep™ Membrane Filters

Pre Cut Size (mm) 13 25 47 90

Qty Per package 100 100 100 25

Nylon 0.2µm SFNY201300 $ 47.25 SFNY202500 $ 55.90 SFNY204700 $ 75.20 SFNY209025 $ 65.55

0.45µm SFNY401300 $ 47.25 SFNY502500 $ 55.90 SFNY504700 $ 75.20 SFNY509025 $ 65.55

CA 0.2µm SFCA201300 $ 47.25 SFCA202500 $ 55.90 SFCA204700 $ 78.50 SFCA209025 $ 65.55

0.45µm SFCA401300 $ 47.25 SFCA502500 $ 55.90 SFCA504700 $ 78.50 SFCA509025 $ 65.55

PTFE 0.2µm SFPT201300 $ 47.25 SFPT202500 $ 55.90 SFPT204700 $ 81.50 SFPT209025 $ 65.55

0.45µm SFPT401300 $ 47.25 SFPT502500 $ 55.90 SFPT504700 $ 81.50 SFPT509025 $ 65.55

PES 0.2µm SFPS201300 $ 47.25 SFPS202500 $ 55.90 SFPS204700 $ 75.20 SFPS209025 $ 65.55

0.45µm SFPS401300 $ 47.25 SFPS502500 $ 55.90 SFPS504700 $ 75.20 SFPS509025 $ 65.55

NC/ME 0.2µm SFME201300 $ 47.25 SFME202500 $ 55.90 SFME204700 $ 81.50 SFME209025 $ 65.55

0.45µm SFME401300 $ 47.25 SFME502500 $ 55.90 SFME504700 $ 81.50 SFME509025 $ 65.55

PVDF 0.2µm SFPV201300 $ 56.75 SFPV202500 $ 99.00 SFPV204700 $164.75 SFPV209025 $ 99.00

0.45µm SFPV401300 $ 56.75 SFPV502500 $ 99.00 SFPV504700 $164.75 SFPV509025 $ 99.00



Filtration Units

Analytical Funnel Autoclavable Filter Holders• Durable, break resistant, no extra parts to break or wear out• Uses a 47mm depth filter disc• 47mm filter funnel (<400 mL) allows for one-handed operation

and has a unique gravity locking mechanism• No. 8 stopper mounts in a standard 1L filtering flask• No clamps, wheel locks or magnets to wear out• Only 2 parts• Solid, stable and easy to use


Applications• Filtering liquids for sterility• Particle removal• General filtration

InnoSep™ Glass Filter Holders


For 47mm disc filters

These convenient, high performance filter holders consist of a borosilicateglass funnel (300mL graduated) and base (with a fused-in coarse porosityfritted support; anodized aluminum clamp and a #8 silicone stopper to fit1000mL filter flasks).Mating surfaces are precisely ground flat to assure a leak-resistant seal. The glass parts and the clamp are designed to work together to prevent anywrinkling or tearing of the filter membrane. Used fo analysis of bacteriological contamination or of suspended solids inwater.

Cleaning/preventing cross contamination:

1. Autoclave - 20 minutes at 121°C2. Sterilize - 2-3 minutes in UV sterilizer3. Sanitize - immerse briefly in sulfuric or hydrochloric acid

Replacement parts available.Please contact us for more information.

Kits consist of:47mm• 300mL glass funnel with scale• 47mm fritted glass base • #8 silicone stopper• 47mm aluminum clamp

25mm• 15mL glass funnel with scale• 25mm fritted glass base • #5 silicone stopper• 25mm aluminum clamp

90mm• 1000mL glass funnel with scale• 90mm fritted glass base • #8 silicone stopper• 90mm aluminum clamp

Part No. Description Price

ISGFH25 25mm Filter Holder Kit $ 162.00



ISGF1000 90mm Filter Holder Kit $ 419.00

Part No. Description Size Quantity Price

IS1213883 Base Only 47mm 1 $ 89.00

IS1213865 Complete Unit 47mm 1 $173.00

IS1214124 Complete Unit 47mm 3 $461.00

IS1213882 Funnel Only 47mm 1 $ 89.00

Ordering informationFilter circles (packs of 100)

Ordering InformationFilter circles and folded filters (packs of 100)


Filter Paper

Quantitative (ashless) Filter PapersMACHEREY-NAGEL manufactures a broad range of ashless filter papers that are refined and purified in a highly developed clean-up processto remove organic and inorganic impurities. This ensures a low ash content of < 0.01%, consistent performance and safe results ingravimetric analysis.

With MACHEREY-NAGEL filtration products you can be surethat the grade for a particular application will always maintainits performance standards, consistency and quality.

MN 615No. 1 Most widely used general purpose filter paper with medium retention andflowrate. This filter paper covers a wide range of laboratory applications and is fre-quently used for clarifying liquids.

MN 616 md No. 2 Slightly more retentive than MN 615 with a corresponding increase in filtrationtime.

MN 617 No. 4 Very fast filter paper with excellent retention of coarse particles and gelantinousprecipitates. Used for example in routine clean up of biological or organic solutions.

MN 619 Filter paper with very high particle retention and slow flow rate. Excellent clarifyingcapacity for cloudy suspensions and for water and soil analysis.

Qualitative Filter PapersMACHEREY-NAGEL qualitative filter papers are widely used for routine separations. The wide variety of grades provide a great choice of particle retention and filtration speed alternatives. Qualitative filter papers are manufactured from top quality raw materials using ultra pure water to ensure consistent and reliable filtration.

Diameter (mm)

MN 615 MN 616 md MN 617 MN 619

l$ 7.00 $ 28.00 $ 9.00 $ 32.00 $ 9.00 $ 32.00 $ 7.00 $ 31.00

90 MN431009 MN531009 MN433009 MN533009 MN434009 MN534009 MN437009 MN537009$ 9.00 $ 28.00 $ 13.00 $ 32.00 $ 12.00 $ 32.00 $ 9.00 $ 31.00





240 MN431024 MN531024 MN433024 MN533024 MN434024 MN534024 MN437024 MN537024

Diameter (mm)

MN 640 m MN 640 w MN 640 d

$ 22.00 $ 22.00 $ 22.00

90 MN203009 MN202009 MN205009$ 31.00 $ 31.00 $ 31.00

110 MN203011 MN202011 MN205011$ 35.00 $ 35.00 $ 35.00

125 MN203012 MN202012 MN205012$ 50.00 $ 50.00 $ 50.00

150 MN203015 MN202015 MN205015$ 74.00 $ 74.00 $ 74.00

185 MN203018 MN202018 MN205018$121.00 $121.00 $121.00

240 MN203024 MN202024 MN205024

MN 640 m

No. 43 White label Classic, general purpose, ashless filter White ribbon paper with medium speed and medium

retention. Typical applications include gravimetric analysis for components, quantitative determinations of sedimentsand high purity clean up procedures.

MN 640 w

No. 41 Grey label Fast, ashless filter paper. Black ribbon Recommended for analytical procedures

involving coarse particles or gelantinousprecipitates.

MN 640 d

No. 42 Green label Ashless filter paper with very fine Blue ribbon particle retention. Standard paper for

critical gravimetric analysis of fine precipitates like barium sulfate or metastannic acid.

www.mn-net.comMACHEREY-NAGEL

Filter Circles

Technical Cuts

Bulk Membranes

DiscoverQuality filters „Made in Germany“ since 1911

Extraction Thimbles

Folded Filters

Filtration

Please contact usfor your copy

of the MN filtration catalogue


Filter Paper

Glass Fibre FiltersMACHEREY-NAGEL glass microfibre filters are manufactured from 100% borosilicate glass. They have wide applications when fine filtrationand high loading capacity is required. Due to the intrinsic properties of borosilicate glass they also allow a safe filtration of aggressive solutionsincluding strong acids and bases.

Ordering InformationFilter circles (packs of 25)

Diameter (mm)

MN 85/90 MN 85/90 BF MN GF-1 MN GF-3

$ 16.00 $ 28.00 $ 28.00 $ 31.00

25 MN4050025 MN4060025 MN4110025 MN4130025$ 20.00 $ 36.00 $ 31.00 $ 36.00

37 MN4050037 MN4060037 MN4110037 MN4130037$ 22.00 $ 40.00 $ 36.00 $ 45.00

45 MN4050045 MN4060045 MN4110045 MN4130045$ 24.00 $ 43.00 $ 39.00 $ 54.00

55 MN405005 MN406005 MN411005 MN413005$ 31.00 $ 55.00 $ 51.00 $ 64.00

70 MN405007 MN406007 MN411007 MN413007$ 40.00 $ 73.00 $ 64.00 $ 92.00

90 MN405009 MN406009 MN411009 MN413009$ 51.00 $ 93.00 $ 87.00 $129.00

110 MN405011 MN406011 MN411011 MN413011$ 64.00 $117.00 $ 98.00 $165.00

125 MN405012 MN406012 MN411012 MN413012$ 84.00 $155.00 $135.00 $233.00

150 MN405015 MN406015 MN411015 MN413015

MN 85/90

Most widely used, general purpose glassfibre filter with very good mechanical stability. The filter contains an organic binder and isstable up to 200°C.

MN 85/90 BF

Binder free filter paper for difference weightanalysis. This paper is especially used in water treatment facilities, for example, for the determination of undissolved solids.

MN GF-1

GF/A This binder free paper offers fine retention, high flow rate and good loading capacity. It is used for high efficiency laboratory filtration as well as air sampling.

MN GF-3

GF/C Slightly more retentive than MN GF-1this binder free paper is used for the collection of suspended solids in potable water as well as natural and industrial waste water in many parts of the world.

Extraction ThimblesMACHEREY-NAGEL manufactures extraction thimbles from top quality raw materials using ultra pure water. Theyare typically used in Soxhlet extraction units, particularly for fat analysis of food and feed and for the analysis ofsoil contaminants. The thimbles allow the safe and efficient solvent extraction from solid materials.

Ordering Information - MN 645 (packs of 25)

Size IDxH (mm) MN 645 Size IDxH (mm) MN 645

$ 86.00 $ 86.00

20 x 80 MN645005 30 x 80 MN645020$ 86.00 $103.00

22 x 80 MN645006 30 x 100 MN645023$ 86.00 $ 93.00

28 x 80 MN645015 33 x 80 MN645951$101.00 $103.00

29 x 100 MN645017 33 x 94 MN645022

MN 645 Extraction thimble made of pure cellulose.

MN 649 Glass microfibre thimbles for high temperature filtration or when using solvents incompatible with cellulose thimbles.

Ordering Information- MN 649 (packs of 25)

Size IDxH (mm) MN 649 Size IDxH (mm) MN 649

$159.00 $190.00

22 x 80 MN649106 33 x 94 MN649122$159.00 $190.00

33 x 80 MN649120 33 x 100 MN649123

Lab-Top, PE Coated Paper MN 210 PEThis highly absorbent paper is coated on one side with polyethylene, providing animpermeable layer for the protection of the subjacent surface. Spilled liquids areeffectively absorbed and can be removed cleanly.


MN112000 MN 210 PE 48x60 cm /100 sheets $211.00

MN112020 MN 210 PE Reel 100 x 0.6 m $377.00

Weighing aids

MN 808 These weighing boats are made from a special, nitrogen-free parchment. They are used to weigh viscous or syrupy substances.

MN 226 A very smooth transparent paper guaranteeing that the weighedgoods can be transfered without loss.

MN 40/25 Easy crushable parchment papers, especially used in the sugarindustry.


MN486000 MN 808, 58x10x10mm /100 pcs $ 97.00

MN486001 MN 808, 70x23x15mm /100 pcs $135.00

MN186002 MN 226, 9x11.5cm, block of 100 sheets $ 12.00

MN194000 MN 40/25, 10x10 cm /1000 pcs $ 29.00

Ordering Information - MN 808,MN 226, MN 40/25

Ordering Information - MN 210 PE


pH-Fix Test Strips

pH-Fix Test StripsFast, accurate, reliable

Always ready for usepH-Fix test strips are used for rapid pH testing directly at thepoint of interest. They are always ready for immediate use.Coming with a complete colour chart they are readily calibrat-ed. As single use devices they are completely maintenancefree. For careful testing of dangerous, poisonous or aggresiveliquids the strips have the optimal design. The longestavailable handle effectively protects the user from contact withthe sample. This increases the safety of operation and addshandling ease.

Patented technology for optimal sample protectionIn the production the indicator reacts with the paper of the testpad to form a chemical bond. The dye is fixed to the test stripand can not bleed into the sample. This protects the sampleagainst contamination and enables measurements in weaklybuffered or strongly alkaline solutions.

Brilliant colours for exact resultspH-Fix test strips feature up to four different indicator pads tocover the complete pH-range. The colour chart exactlymatches both colour and position of the pads on the strips.This enables highly precise pH-determination and makes thetest strips rapid and reliable.

Convenient flat boxesUsers appreciate the quality of pH-Fix. Its classic designrequires small space and fits into the breast pocket of everylab coat.

Established clear plasticThe classic pH-Fix box is made from a special hightransparency plastic. This ensures optimal protection of thecolour chart and a reliable readout.

Wide range of applications

pH-Fix test sticks are appreciated by users worldwide. They are the economic and easy standard for applications,e.g.:

• Aquaculture• Agriculture• Chemical laboratories• Industry• Dairies• Production• Physician offices• Hospitals• Schools• Universities• Metal workshops• Fire brigades• Police• Authorities• Food processing industry• Surface treatment and many more

O CR1

R2

esolulleC

eyD

Contents: 100 StripsCatalogue # MN92110.CLS

pH Test 0-14

76543210

Part No. Description Quantity Price

MN92110.CLS Test strips, 6 x 85mm, pH-Fix 0-14 100 $ 23.75

Wide variety of pH-Fix Test Strips available for all applications listed above.

Please contact us for more information!



FunnelFit Filters

XENOSEP FunnelFit™ Filters for extract drying applicationsPre-formed conical filter• Saves time and solvent • Reduces cost and increases lab productivity

For about the same price as your current filter, newFunnelFit™ conical filters eliminate the mundane andfrustrating preparation steps required when working withcumbersome, ill-fitting, pre-pleated or quadrant folded filters.

The pre-formed conical filter fits the funnel perfectly every timewhich improves quality by preventing sample bypass and tipblow-out.

Using FunnelFit™ conical filters is 10 times faster thanquadrant folding circular filters which improves laboratoryproductivity.

FunnelFit™ Conical Filters fit the funnel perfectly ensuring high quality results

Drop & Go!

Eliminate folding, repositioning, and pre-wetting hassles to save time and solvent costs

Part No. Description QuantityCross Reference

to WhatmanPrice

IS2440-125 125mm DA-Medium (8-12 µm) 100 1440-125 $ 58.00IS2440-150 150mm DA-Medium (8-12 µm) 100 1440-150 $ 77.00IS2441-125 125mm DA-Coarse (20-25 µm) 100 1441-125 $ 58.00IS2441-150 150mm DA-Coarse (20-25 µm) 100 1441-150 $ 77.00IS2442-125 125mm DA-Fine (2-3 µm) 100 1442-125 $ 58.00IS2442-150 150mm DA-Fine (2-3 µm) 100 1442-150 $ 77.00

Other diameters and grades available upon request.



QuEChERS

Canadian Life Science now offers QuEChERS (Quick Easy,Cheap, Effective, Rugged and Safe… pronounced "katchers")products for determining pesticide levels in food samples.

These products make it simple to prepare your food samplesfor analysis with:

• High recoveries• Accurate results• High sample throughput• Minimal solvent use• Less labour• Lower costs• Simple glassware

Sample

Aliquot:1mL, 6mL or 8mL

Original Method10g samples

Original Method15g samples

BufferedAOAC 2007.1 Method

15g samples

BufferedEN 15662 Method

10g samples

General Fruits &Vegetables

2mL & 15mL kits

Fatty/Waxy Fruits & Vegetables

2mL & 15mL kits

Fruits & Vegetableswith Fats, Pigments

2mL & 15mL kits

Aliquot:1mL, 6mL or 8mL

Analysis

Pigmented Fruits & Vegetables

2mL & 15mL kits

General Fruits &Vegetables

2mL & 15mL kits

Fatty/Waxy Fruits & Vegetables

2mL & 15mL kits

Fruits & Vegetableswith Fats, Pigments

2mL & 15mL kits

Pigmented Fruits & Vegetables

2mL & 15mL kits

Add Acetonitrile

Check pH and adjust to 5 - 5.5Add internal standardshake and centrifuge

Shake and Centrifuge

EN MethodAOAC Method

Basic Method for using QuEChERS


QuEChERS

Part No. Description Volume(mL)

Recommended Application Qty. Price

QuEChERS Kit with Instructions

XE-29500 AOAC 2007.1 50/2 AOAC 2007.1 50 $215.00

50mL Centrifuge Tubes for Sample Extraction

XE-295014g MgSO4, 1g NaCl, 1g trisodium citrate dihydrate, .5g disodium hydrogencitrate sesquihydrate

50 Mini-Multiresidue, European prEN-15662 50 $105.00

XE-29502 4g MgSO4, 1g NaCl 50 50 $ 94.00

XE-295036g MgSO4, 1.5g NaCl, 1.5g sodium citrate dibasic750mg disodium citrate dibasic sesquihydrate

50 50 $127.00

XE-29504 6MgSO4, 1.5g NaOAc 50 AOAC 2007.1 50 $105.00

XE-29505 6g MgSO4, 1.5g NaOAc, 750mg disodium citrate sesquihydrate 50 50 $116.00

XE-29506 Empty 50mL Centrifuge Tube 50 Mini-Multiresidue, European prEN-15662,AOAC 2007.1 50 $ 55.00

2mL Micro-Centrifuge Tubes

XE-29507 150mg MgSO4, 25mg PSA 2 Mini-Multiresidue, European prEN-15662 100 $138.00

XE-29508 150mg MgSO4, 25mg PSA, 25mg C18 2 Mini-Multiresidue 100 $143.00

XE-29509 150mg MgSO4, 25mg PSA, 2.5mg GCB 2 Mini-Multiresidue, European prEN-15662 100 $143.00

XE-29510 150mg MgSO4, 25mg PSA, 7.5mg GCB 2 Mini-Multiresidue, European prEN-15662 100 $154.00

XE-29511 150mg MgSO4, 50mg PSA 2 AOAC 2007.1 100 $143.00

XE-29512 150mg MgSO4, 50mg PSA, 50mg C18 2 AOAC 2007.1 100 $154.00

XE-29513 150mg MgSO4, 50mg PSA, 50mg GCB 2 AOAC 2007.1 100 $204.00

XE-29514 150mg MgSO4, 50mg PSA, 50mg C18,50mg GCB 2 AOAC 2007.1 100 $215.00

15mL Micro-Centrifuge Tubes

XE-29515 1200mg MgSO4, 400mg PSA 15 AOAC 2007.1 50 $116.00

XE-29516 1200mg MgSO4, 400mg PSA, 400mg C18 15 AOAC 2007.1 50 $127.00

XE-29517 1200mg MgSO4, 400mg PSA, 400mg C18, 400mg GCB 15 AOAC 2007.1 50 $292.00

XE-29518 900mg MgSO4, 150mg PSA 15 European prEN-15662 50 $105.00

XE-29519 900mg MgSO4, 150mg PSA, 15mg GCB 15 European prEN-15662 50 $116.00

XE-29520 900mg MgSO4, 150mg PSA, 45mg GCB 15 European prEN-15662 50 $149.00

XE-29521 900mg MgSO4, 150mg PSA, 150mg C18 15 European prEN-15662 50 $116.00

XE-29522 900mg MgSO4, 300mg PSA, 150mg GCB 15 NA 50 $204.00

XE-29523 900mg MgSO4, 300mg PSA, 150mg C18 15 - 50 $138.00

6mL SPE Column with PTFE Frits

XE-29524 200mg GCB/400mg PSA 6 Used in Schenck variation 30 $182.00XE-29525 250mg GCB/500mg PSA 6 Used in Schenck variation 30 $204.00XE-29526 500mg GCB/500mg PSA 6 Used in Schenck variation 30 $286.00



TCLP

XENOSEP TCLP Filters Xenosep offers two types of TCLP filters suitable for use inEPA Method 1311 depending on the analytes of interest. Bothtypes of TCLP filters are binder-free, borosilicate glassmicrofiber filters with an effective pore size of 0.7 +/- .01µm asspecified in the method.

Volatiles

Use Xenosep Standard-Certified TCLP Filters. These filtersare tested for several important parameters and are certifiedto meet the specification above.

Metals or non-volatiles

Use Xenosep acid-washed TCLP filters. These filters arepre-washed in 1N HNO3 acid and then rinsed with deionizedwater according to EPA Method 1311 to save you time, reducewaste and provide low background blank values. A certificateof analysis demonstrating background TCLP metal values isalso included in each box.

Part No. Diameter (mm) Price/100

Standard-Certified TCLP Filters for VolatilesesXE-306047 47 $ 43.00

XE-306076 76 $ 54.00

XE-306090 90 $ 65.00

XE-306110 110 $120.00

XE-306125 125 $153.00

XE-306142 142 $175.00

XE-306150 150 $219.00

Ordering Information Ordering Information

Part No. Diameter (mm) Price/100

Acid-Washed TCLP Filters for Metals and Non-VolatilesXE-307047 47 $ 87.00

XE-307076 76 $109.00

XE-307090 90 $120.00

XE-307110 110 $119.00

XE-307125 125 $165.00

XE-307142 142 $296.00

XE-307150 150 $362.00

EPA Method 1311 (TCLP), Section 4.4:“When evaluating the mobility of metals, filters shall be acid washed prior to use with 1N nitric acid followed bythree consecutive rinses with deionized distilled water (a minimum of 1 L per rinse is recommended).”


TSS Filters for Standard Methods 2540 C and 2540 D

Ensure worry free audits by taking the guesswork out of method complianceXenosep TSS Filters are specifically designed to ensurecompliance with the filter preparation requirements ofStandard Methods 2540 C (Total Dissolved Solids Dried at180°C) and Standard Methods 2540 D (Total SuspendedSolids at 103-105°C). We removed the guesswork typicallyassociated with audit checklist question #6 by making thewrinkle side of the filter visibly different than the screen side.Now everyone can clearly see and easily determine whichside needs to face up to ensure compliance.

In addition to more distinguishable filter surface characteristicsshown at left, these 1.5 µm binder-free, fast flowing, fineporosity borosilicate glass microfiber filters have been opti-mized to eliminate pin holing and minimize fiber shedding; twoquality issues known to affect other brands of TSS filters.Xenosep TSS Filters are readily available in the popular sizesbelow for use in a wide variety of CoorsTek chemical-porcelainlabware including Bitumen, Buchner, Gooch, Hirsch, andmany other popular filter holders.

Other sizes are available upon request.

Wrinkle side faces up

Screen side faces down

Part No. Diameter (mm) Fits CoorsTek# Price/100

XE-301020 20 Gooch - 60148 $ 20.00

XE-301021 21 Gooch - 60148 $ 20.00

XE-301024 24 Gooch - 60151 $ 20.00

XE-301025 25 Hirsch - 60299 $ 20.00

XE-301030 30 Gooch - 60153 $ 25.00

XE-301032 32 Bitumen - 60170 $ 25.00

XE-301035 35 Buchner - 60239 $ 25.00

XE-301037 37 Buchner - 60239 $ 25.00

XE-301042 42.5 Hirsch - 60301 $ 27.00

XE-301047 47 Hirsch - 60301 $ 29.00

XE-301055 55 Buchner - 60240 $ 36.00

XE-301070 70 Buchner - 60242 $ 43.00

XE-301090 90 Buchner - 60243 $ 57.00

XE-301110 110 Buchner - 60244 $ 75.00

XE-301125 125 Buchner - 60245 $ 98.00

XE-301150 150 Buchner - 60246 $127.00


• Extract samples 5 times faster, • Distill samples 3 times faster • Significantly lower cost per test

The first SPE filter and glass apparatus specially designedfor dirty wastewater samples.Integral design maximizes filtration efficiency, simplifiesanalyte recovery, and ensures reproducible results.

Step 1Extract 1L sample17 seconds is all it takes to filter a 40 mg/L* OPR and achieve98% recovery. Thatʼs 50 times faster than a typical single layerSPE filter with 89% recovery. In addition, triple layer XenosepSPE Filters have 5 times the filtration capacity already built-infor the MS, MSD, and hard-to-filter samples.*As required by EPA Method 1664A

Step 2Elute and dry extractLess filter clogging enables more efficient filter drying andeluting with less solvent. Xenosep sodium sulfate columnssave time by eliminating off-line drying steps or repouring theextracted water sample back into the separatory funnel.

Step 3Distill and oven dry extractLess extraction solvent means faster distillation. Final hexaneextracts distill to dryness in about 10 minutes. Unique flatsided Xenosep flasks reduce oven drying times by 67% so youget QC tests in the dessicator 3 times faster (see Table 1).


SPE Systems for EPA Method 1664A

XENOSEP® SPE Systems for EPA Method 1664A

Compare the OptionsProcess Step Xenosep® SPE Typical SPE Hexane LLEExtract-Elute-Dry 8.8 min. 26.5 min. 46.0 min.Distill-Oven Dry 21.0 min. 50.0 min. 60.0 min.Time to Dessicator 29.8 min. 76.5 min. 106.0 min.Estimated Labor/Batch of 20 4 hrs. 6 hrs. 8 hrs.Xenosep Labor Savings/Batch 2 hrs. 4 hrs.

• Short wide funnel for easy access and effective glassware rinsing

• Built in space for optional prefilters,filter aids, and/or drying agent additions to “wet” solids

• Secure coupler maximizes effective filtration area and prevents assembly misalignment

• Teflon ® encapsulated O-ring seal eliminates solvent and vacuum leakswithout extractables

• Solid rimmed stainless steel support prevents analyte bypass

• Flared collection tube for easy removal

• Wider internal diameter stem maximizes filtration rates

• Universal 40/35 joint connects to elution apparatus or standard multi-place manifold, optimized to accept 30mm OD vials or collection tubes

Easy to clean glassware minimizes breakageand fits standard washers

TS

Conditioning/filtration apparatus

• Unique integral apparatus increases productivityand lowers cost per result

• Disposable prepacked sodium sulfate cartridge maximizes recoveries, speed, and eliminates off-line transfers

• Dedicated station for sample elution,drying and CIP (clean-in-place) glassware solvent rinsing

• Universal TS 24/25 joint for collection into standard TS 24/40 flask

• Flat sided flask gently evaporates extract to increase recoveries and lower MDLs

• Compact cross-over condenser design simplifies solvent recovery and provides analyst protection

• Flat sided flask optimized to reduce distillation/evaporation times

• N2 inlet provided for safety and faster distillation/evaporation

Elution/cleaning apparatus

Distillation/Evaporation Apparatus

Table 1

Step 1

Step 2

Step 3

Note: Lab stand and clamps not included



Xenosep® SPE Fast Throughput High Capacity FiltersUnique triple layer construction offers fastest samplethroughput and highest filtration capacity

• No emulsions or Freon® non-compliance• Assure legally defensible data• Achieve higher quality results• Reliable and consistent performance• Decrease sample turnaround time• Eliminate additional prefilter expense• Significantly reduce operating cost

Why are 40 mg/L PAR comparisons important?

EPA Method 1664A requires the PAR concentration as follows:“The weight must be 40 ± 1 mg” (Section 7.10.3 NOTE) and atleast this amount are required for the QCS, OPR, MS, MSD,and IPR samples. (Sections 9.8, 9.7, 9.6.1, 9.3.1, 9.2.2, 7.11and 7.10) Although certain method modifications are allowed,a change in the PAR concentration is not expressly permittedand “shall be considered a major modification subject to appli-cation and approval of alternate test procedures under CFR136.4 and 136.5.” (Sections 1.7 and 1.8)

Why expose the defensibility of your data to unnecessary legalrisk? Use 40 mg/L QC samples and achieve higher qualityresults with Xenosep SPE Filters.

Cutaway views of how the triple layer Xenosep SPE Filterseparates analytes from particulate and unwanted soluble interferences

• Red–Oil and Grease Analytes• Blue–Soluble Interference

• Green–3 µm Particulates• Black–8 µm Particulates• Brown–30 µm Particulates

Filtration Extraction Elution

5-25 µm Prefilter

1-5 µm Prefilter

Adsorbent Layer

0

200

400

600

800

1000

1200

0 1 2 3 4 5 6 7 8 9 10Time (Minutes)

)Lm( ,deretliF elp

maS

Temperature: 21°C, Vacuum: 15˝ Hg

Xenosep ® SPE Filters 1 L in 38 Sec. (Recovery 93.4%)

Typical SPE Filters 1 L in 6.5 Min. (Recovery 79.9%)

Sample:40 mg/L* EPA 1664A Std.Plus 14 g of Solids Added

SPE Filters–47 mm Diameter

Filter dirty samples 10 times faster

Extra thick fluffy layersuspends solids filtercake and preventspremature clogging ofdirty samples

0

1

2

3

4

5

6

0 2 4 6 8 10 12 14 16 18 20Time (Minutes)

)L( deretliF dradnatS RAP

)gm( deretliF dradnatS RAP

Temperature: 21SPE Filters–47 mm Diameter

°C, Vacuum: 15˝ Hg

Xenosep SPE Filters 1 L in17 Sec. (Recovery 97.6%)

Typical SPE Filters 1 L in 19.2 minutes (Recovery 89.3%)

Xenosep SPE Filters 5.5 Lin 20 Min. (Recovery 95.5%)

40

80

120

160

200

240

Xenosep SPE Filters Have FIVE Times Greater Filtration Capacity

*As required by EPA Method 1664A

SPE speed and filtration capacity 40 mg/L* EPA 1664A PAR standard

Part No. DescriptionPrice(48pk)

XE-24547 SPE Filters, 1664A, 47mm Call







Xenosep SPE Systems for performing EPA Method 1664A areavailable in convenient Starter Kits for laboratories juststarting out. Starter Kits include all components required toprocess one sample at a time. Additional components areavailable for scale up as required.

Xenosep Manifold Kits are available for a three positionmanifold and include components necessary to process threesamples at a time.


XE-26616 Starter Kit, 47mm, 1 Place Call Part No. for Kit Components Included* Qty

XE-26603; XE-26604; XE-26610; XE-26611; XE-26613; XE-26614; XE-26615; XE-26508; XE- 26514; XE-26515; XE-26516; XE-26517

1 each

XE-26608 2 eachXE-26512 3 eachXE-26513 7 each

Part No. Description Qty Price

XE-26511Distillation Kit, Complete Call XE-26513; XE-26514; XE-26515 1 eachXE-26512 3 each

XE-26526Flask Kit, Flat Sided, TS 24/25, 125 mL Call XE-26513 12 each

XE-26600

SPE Filtration Assembly, 47mm, Starter Call XE-26603; XE-26604; XE-26610;XE-26611; XE-26613 1 each

XE-26608 2 each

XE-26601

SPE Filtration Assembly, 47mm, Manifold Call

XE-26603; XE-26605; XE-26610;XE-26611; XE-26613 1 each

XE-26608 2 each

XE-26620Consumables Kit, 24 Tests $172 XE-24547; XE-26520; XE-26524 24 each

Additional apparatus assembly kits

* See Replacement Parts for description


XE-24547 SPE Filters, 1664A, 47mm 48 Call

XE-26520 Pipets, Transfer, Polyethylene, 15mL 48 $ 14.00

XE-26524 Column, Inline, Sodium Sulfate, 10g 48 $126.00

XE-26528 Fibers, Prefilter, 50g 1 $ 83.00

XE-26532 EPA 1664A Std., 1 x 100 mL, 4 mg/mL 1 $ 11.00

XE-26533 EPA 1664A Std., 12 x 10 mL, 4 mg/mL 12 $ 5.00

XENOSEP® SPE manifold kit


XE-26618 Manifold Kit, 47mm, 3 Place Call

Part No. for Kit Components Included* QtyXE-26615; XE-26512; XE-26516; XE-26519 1 eachXE-26603; XE-26605; XE-26610; XE-26611; XE-26507; XE-26613 3 each

XE-26608 6 each

Note: Manifold sold separately

* See Replacement Parts for description


XE-26507 Vials, Collection, 30 x 125mm 1 Call

XE-26508 Tube, Collection, 30 x 200mm 1 Call

XE-26512 Clamp, Polyoxymethylene Acetal, TS 24/25 1 Call

XE-26513 Flask, Flat Sided Erlenmeyer, TS 24/25, 125mL 1 Call

XE-26514 Flask, Round Flat Bottom, TS 24/25, 125mL 1 Call

XE-26515 Condenser, Crossover w/#2HB 1 Call

XE-26516 Eluter, Glass, w/#2HB 1 Call

XE-26517 Stopcock, Glass, 120° 3 way, 4mmID 1 Call

XE-26519 Stopcock Assembly, Manifold 1 Call

XE-26523 Vent Assembly, Manifold 1 Call

XE-26603 Funnel, 300 mL, 47mm 1 Call

XE-26604 Holder, Starter, 47mm 1 Call

XE-26605 Holder, Manifold, 47mm 1 Call

XE-26608 O-Rings, FEP-Viton®, Coupler, 47mm 1 Call

XE-26610 Coupler, PTFE, 47mm 1 Call

XE-26611 Support, Stainless Steel, 47mm 1 Call

XE-26613 Clamp, Aluminum, 47mm 1 Call

XE-26614 Flask, TS 40/35, 1L 1 Call

XE-26615 Tubing, Tygon®, 3/8˝ ID x 5/8˝ OD, 3´ 1 Call

XE-26619 Manifold, Complete, Stainless Steel, 3 Place 1 Call

Ordering InformationConsumables

Ordering InformationReplacement parts and components

XENOSEP® SPE starter kit

Filtration Filter Membrane Compatibility Chartv~Filtration_Products... · Filtration Filter...

Documents

Transcript of Filtration Filter Membrane Compatibility Chartv~Filtration_Products... · Filtration Filter...