FILTRATION EQUIPMENT AIR FILTERS And FILTRATION … FILTRATION EQUIPMENT AIR FILTERS And FILTRATION...

PRO

DU

CT

CAT

ALO

GU

E A

IR F

ILTE

RS

And

FIL

TRAT

ION

EQ

UIP

MEN

T

AIR FILTERS And FILTRATION EQUIPMENTProduct catalogue

KS Klima-ServiceOur aim and mission is to manufacture products that protect human health and meet prescribed parameters of European and international standards and the strictest ecological and environmental regulations.

3

Table of ContentsOverview of KS Klima-Service products by usage 4KS Klima-Service 5Filtration – classification of filters 6New international classification of air filters according to CSN EN ISO 16890, classification of air filters according to CSN EN 1822:2010 8ISO 16890 – new global standard for testing and classification of filters 9Certification 11Legend 12

Filter media 13KS PPI 20/6 and PPI 10/10 14KS 15/100 and KS 15/150 15KS B/220 and KS B/290 16KS 15/350 and KS 15/500 17KS A/300 and KS A/500 18KS A/560 G 19KS A/560 G10 – Viledon, Viledon PA 5 micron 20KS Glas 1“ and KS Glas 2“ 21KS Glas C and KS Glas 300 22KS PA Grün 2“, KS PA Grün 3“, KS PA Grün 4“ 23Filter media VS LAK 24KS AFVH – floor pre-filter 25KS LAK – floor filter 26

Pocket filters 27KS PAK 25 and KS PAK 35 28KS PAK 35L 29KS PAK 45 and KS PAK 55 30KS PAK 62 31KS PAK 85 32KS PAK 85 NEW 33KS PAK 95 34KS PAK 98 35KS PAK Premium 36KS PAK 45 and KS PAK 62 – glass fibre 37KS PAK 85 – glass fibre 38KS PAK 95 and KS PAK 98 – glass fibre 39KS PAK AST/2 and KS PAK AST 40

Frame filters 41KS Z1/2“, KS Z1“ and KS Z2“ 42KS PR NEW 43KS PL-25 44KS PL-5 45KS PL-10 and KS PL-20 46KS PL-F 47KS W 50/4, KS W 100/4 and KS W 150/4 48KS W 50/5, KS W 100/5 and KS W 150/5 49KS MPS, M6 50KS MPS, F7 51KS MPS, F9 52

KS MPP 96/5 53KS MPP 96/6 and KS MPP 96/7 54KS MPP 96/8 and KS MPP 96/9 55KS GTA 200 and KS GTA 300 56KS MA 12.5, KS MA 20, KS MA 25 and KS MA 45 57

Compact filters 58KS FP V4 59KS FP V3 60KS FP E10-H13 61

Absolute filters for microparticles 62KS BESTFIL 63Ultrafilters N 66

Industrial filtration systems 68Industrial filtration systems 69Filter cartridges for industrial filtration 70Concept of extracted painting walls and painting desk for industrial filtration 71

Components for clean rooms 72CG inlet pressure ceilings with laminar flow 73KS Clean extensions 74

Filter units for HVAC pipelines 75Filter units KS BK 76Special filter units with multi-stage filtration 77KS NICE AIR 78KS BZV safety box 79

Mounting frames 80Mounting frames KS RA 81Mounting frames KS RS 120 82Mounting frames KS NFG 83Mounting frames KS RAP 84

Adsorption filters with activated carbon 85KS KOPA and KS KOPA-BIG 86KS BD 87KS BD BIG 88Desulphurisation unit SULOFF 89AFP 90KS WA – panel filter 91PL-CARB 92Non-impregnated activated carbon 93Impregnated activated carbon 94

Accessories 95Pressure gauges for pressure drop measurement 96

Service and installations 98

4

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

ProductsOverview of KS Klima-Service products by usage

Office areas

Hotels, restaurants

Other OperatiOns

Desulphurisation unit for WWtp, inDustrial filtration systems

Paint shoPs, odours

page 13–26

Filter media

page 13–26

Filter media

page 13–26

Filter media

page 89

SULOFF

page 13–26

Filter media

page 41–57

Frame filters

page 41–57

Frame filters

page 62–67

HEPA and ULPA

filters

page 58–61

Compact filters

page 78, 86–94

Compact filter units

with activated carbon

page 27–40

Pocket filters

page 27–40

Pocket filters

page 27–57

Filters for HVAC

page 68–71

Industrial filtration systems

page 85–94

Adsorption filters with activated carbon

page 62–67

Absolute filters for

microparticles

page 72–74

Components for clean rooms

page 58–61

Compact filters

Hospitals, pHarmaceutical facilities, electronics

5

KS Klima-ServiceKS Klima-Service

In 1993, Jiří and Liana Beseda founded the KS Klima-Service Company that became an exclusive representative of the German KS Klima-Service GmbH. It started to import air filters for the Czech and Slovak markets.

In 1995, the company began its own production, first of simple filters, and then of technologically more complicated pocket filters, activated carbon filters and highly efficient HEPA filters. In order to increase its credibility and to win important orders, the KS Klima-Service a.s. joint stock company is founded in 1997.

In April 2018 the KS Klima-Service joint stock company started its operations in the premises of a new production plant at Evropská 710, 261 01 Příbram II. The premises accommodate the whole production plant, warehouses, office, customer and presentation centre with a sample hall.

During its operation the company has undergone significant changes which resulted in building a new production plant. A basic philosophy of the company founder has always been the high quality of products provided with the maximum service and customer care. The new management has taken over this philosophy and successfully applied and developed it until the present.

The company management focuses on the long-term strategy of KS Klima-Service, a.s. in the field of development, growth and strengthening the reputation of the company on the Czech as well as foreign markets in the field of the production of filters and filtration equipment. Sufficient production and warehouse areas in the new and modern production plant contributed especially to an improvement of customer comfort and working conditions of employees.

Mission Through its modern and responsible way of management, the KS Klima-Service joint stock company intends to provide its customers the best services in the field of development, production and deliveries of air filters and filtration equipment. Our aim and mission is to manufacture products that protect human health, form part of modern production technologies and at the same time the strictest ecological and environmental regulations.

� Team�of�KS�Klima-Service,�a.s.

®

References

http://www.seeklogo.net

6

Filtration equipmentClassification of filters

CSN EN ISO 16890 Filtration class according to CSN EN 779:2012*

Examples of separated particles material Recommendation for application of air filters KS filter type

ISO COARSEFilters for coarse dust particles Particle size

range µm X < 10 µm

G1*G2*

• Leaves

• Insects

• Textile fibres

• Sand

• Flying ash

• Water drops

• Hair

• Only for the simplest applications (e.g. as protection against insects).

• KS PL

• KS GLAS Z

• KS PR

• KS MA

• Filter media

G3*G4*

• Flower pollen

• Pollen

• Fog

• Waste air from painting boxes and kitchens

• Protection against pollution for air conditioning and compact instruments (e.g. window air conditioning, fans)

• Pre-filters for course filtration class (necessary only in case of heavy polluted input air)

• Pre filters and circulation filters for civil protection equipment

• KS PAK 25, 35,

• KS GLAS Z

• KS W

• KS GT

• KS PR

• KS PR NEW

• KS PL

• Filter media

• KS MA

ISO ePM10

Filters for fine dust particles

Particle size range µm

0.3 ≤ X ≤ 10

M5*

• Spores

• Cement dust

• Particles causing stains or dust sedimentation

• Entering outside air filters for the areas with the lowest demands (e.g. workshops, storages, garages)

• Pre-filters for classes of group ISO ePM1

• KS PAK 45,

• KS MPS

• KS MPP

• KS PAK AST

• Filter media

• KS BK

ISO ePM2.5


Particle size range µm

0.3 ≤ X ≤ 2.5

M6*

• Larger bacteria

• Germs on carrying particles

• Inlet filters for low demand areas (e.g. sales areas, some production areas)

• Pre-filters for classes of group ISO ePM1 and EPA

• Outlet air filters before heat exchangers

• KS PAK 62

• KS MPS, KS MPP

• KS FP

• KS GT

• KS BK

• TMP

ISO ePM1


Particle size range µm 0.3 ≤ X ≤ 1

F7*

F8*

• Accumulated carbon black

• Dust passing through lungs

• PM 2,5 – dust

• Cement dust (fine fraction)

• Circulating air filters in ventilation units

• Final-filters in air-conditioning units for medium demands, e.g. department stores, offices and some production areas

• Filtration class E11 and E12 pre-filters

• KS PAK 85, 95

• KS W, KS MPP

• KS FP

• KS GLAS C

• N

• KS BK

• TMP

F9* • Tobacco smoke (coarse fractions)

• Metal oxides smoke (coarse fractions)

• Oil smoke

• Bacteria

• Final-filters in air-conditioning units for higher demands, e.g. offices, production areas, distribution centres, laboratories

• Outside air equipment in hospitals

• Computer machinery centres

• Filtration class H13, H14 pre-filters

• Pre-filters for adsorption filters (e.g. activated carbon filters)

• Pre-filters for pharmaceutical industry (mind certification regulations)

• KS PAK 95, 98

• KS FP

• Ultrafilter N

• KS BK

• KS MPP

• KS MPS

• TMP

* is not compatible with the new standard EN ISO 16890As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

7

Filter group Filtration class according to CSN EN 1822

Examples of separated particles material Recommendation for application of air filters KS filter type

E, HFilters

for microparticlesEfficient for particle ≥ 0.01 µm

CSN EN 1822:2010

Efficiency for MPPS particles

(0.1 – 0.3 µm) 85 – 99.95%

E10E11

• Germs

• Tobacco smoke

• Metal oxides smoke

• Viruses on carrying particles

• Soot

• Final-filters for high demands areas (e.g. laboratories and hospitals)

• Final-filters for “clean rooms” classes ≥ ISO 7 in pharmaceutical, food processing, optical and light engineering industries

• Ultrafilter N

• TMP

• KS BESTFIL

E12H13

• Oil smoke in the stage of formation

• Aerosol – microparticles

• Radioactive aerosol

• Sea salt evaporation vapours

• Final-filters for hospitals with higher demands, however without the leakage test prescription

• Final-filters for food processing, electronics, pharmaceutical and film industries

• Outlet air filters for nuclear industry equipment

• Final-filters for "clean rooms" classes ≥ ISO 5

• Final-filters in civil protection equipment

• KS FP

• KS BESTFIL

• Ultrafilter N

H14 • Aerosol – microparticles

• Viruses

• Final-filters for "clean rooms" classes ≥ IS0 3



• KS BESTFIL

• Ultrafilter N

UFilters

for microparticlesCSN EN 1822:2010

Efficiency for MPPS particles

(0.1 – 0.3 µm)

99.999 5 – 99.999 995%

U15U16U17

• Aerosol – microparticles • Final-filters for "clean rooms" classes ≥ IS0 3



• CR, CRM

• N, NG, JM

AFilters with activated

carbonNot standardised

Activated carbon (non-impregnated)

• Light volatile hydrocarbons VOC’S

• Bitumen, tar, petrol and kerosene vapours

• Vapours from solvents

• Body, civilizational and hospital odours

• Food, kitchen and putrid odours

• Separation of odours in the airports, office and administration buildings, hotels, hospitals

• IAQ improvement

• SBS (sick building syndrome) improvement

• Filtration of inlet air in microelectronics

• Elimination of harmful gases from circulating air

• KS AFP-AZ

• KS BD

• KS KOPA

• KS AFP-AZ DUO

• KS NICE AIR

• KS BD BIG

• KS KOPA BIG

• KS WA

Filtersfor gas absorption

Not standardised

Impregnated activated carbon,

polymers

• Acidic trace gases

• SO2, S04, NO2, NOx

• HCl, H2SO4, H2S, HF, Cl2• Amines

• NH3, NH4

• NMP, HMDS

• Inlet air filtration for control centres and computer rooms (e.g. in airports)

• Filters of inlet and circulating air for distribution centres and control rooms in corrosive environments

• Inlet and circulating air filters for microelectronics

• Inlet and circulating air filters for museums, historical archives and libraries

• Circulating air filtration in microelectronics

• KS BD

• KS KOPA

• KS BD BIG

• KS KOPA BIG

8

EN 1822 Total value for MPPS particles (0.1 – 0.3 µm) Integral value for MPPS particles (0.1 – 0.3 µm)

Filter group Filtration class Efficiency (%) Penetration (%) Efficiency (%) Penetration (%)

Group E EPA

E 10 ≥ 85 ≤ 15 – –

E 11 ≥ 95 ≤ 5 – –

E 12 ≥ 99.5 ≤ 0.5 – –

Group H HEPA

H 13 ≥ 99.95 ≤ 0.05 ≥ 99.75 ≤ 0.25

H 14 ≥ 99.995 ≤ 0.005 ≥ 99.975 ≤ 0.025

Group U ULPA

U 15 ≥ 99.999 5 ≤ 0.000 5 ≥ 99.997 5 ≤ 0.002 5

U 16 ≥ 99.999 95 ≤ 0.000 05 ≥ 99.999 75 ≤ 0.000 25

U 17 ≥ 99.999 995 ≤ 0.000 005 ≥ 99.999 9 ≤ 0.0001

New international classification of air filtersaccording to CSN EN ISO 16890

Classification of air filtersaccording to CSN EN 1822:2010

Class designationRequirement

Specified valuefor the class

ePM1, min ePM2.5, min ePM10

ISO COARSE – – ≥ 50% Initial gravimetric separability

ISO ePM10 – – ≥ 50% ePM10

ISO ePM2.5 – ≥ 50% – ePM2.5

ISO ePM1 ≥ 50% – – ePM1

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

9

PM is derived from two English words particulate matter. In the Czech Republic, the terms of particles, suspended particles or aerosol particles are widely used, but the lay public simply uses the term of dustiness although it does not mean only “dust”. All such particles hazardous to human health are classified in various PM classes, divided as follows: PM 1 (aerodynamic diameter ≤ 1 µm), PM 2.5 (≤ 2.5 µm) and PM 10 (≤ 10 µm).

What does PM1 mean? It means that it is a particle with a diameter smaller than 1 micron (thousandth of millimetre).

1 µm = 0.001 mm = PM 12.5 µm = 0.0025 mm = PM 2.510 µm = 0.01 mm = PM 10

PM 10 (≤ 10 µm)Dust, pollen, moulds

Human hair(50–70 µm)

PM 1 (≤ 1 µm)Mist, carbon black, tobacco smoke

PM 2.5 (≤ 2,5 µm)Exhaust gas particles, organic particles

ISO 16890 – new global standard for testing and classification of filters

WHO (the World Health Organization) has initiated studies which examined effects of fine dust on human health. Results of these studies showed a clear outcome that the current polluted air, and especially small particles in the air, are harmful to health and contribute to the origin of fatal diseases of blood circulation and respiratory tract. Each of the WHO member states voted unambiguously for this new standard.

10

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

PM 10 (≤ 10 µm)Upper respiratory tract – coarser particles (pollen and dust)

PM 2.5 (≤ 2.5 µm)Lower respiratory tract – finer particles (bacteria, mould spores)

PM 1 (≤ 1 µm)Alveoli, or blood circulation – ultra-fine particles (viruses, combustion particles)

Influence of individual particles on the organismPM 1 (≤ 1 µm)For example, this is a size of viruses and combustion particles – they belong among the worst ones for the human organism because they can get to blood circulation and alveoli and remain deposited there.

PM 2.5 (≤ 2.5 µm)For example, this is a size of bacteria and spores of moulds – they can get to the lower respiratory tract.

PM 10 (≤ 10 µm)For example, this is a size of pollen and dust – they can get to the upper respiratory tract.

Fine dust with a particle size of PM 10 can enter deeper areas of human trachea through the nasal cavity. Smaller particles with a particle size of PM 2.5 can even get to bronchi and alveoli. Highly fine particles with a particle size below 0.1 µm can even get to the lung tissue and blood circulation.

The effects of fine dust on health differs depending on the size and depth of ingress of the particles. These effects range from non-harmful diseases, such as irritation and inflammations of mucosa and a localised

throat inflammation to increased plaque formation in arteries, thrombophilia or changes in the nervous system regulatory function.

This shows the main difference between the old EN 779:2012 and the new ISO 16890 standards. EN 779 did not consider fine particles contained in the air and assessed a filter efficiency at the particle size of 0.4 µm.

However, this did not correspond to real requirements. ISO 16890 distinguishes three particle sizes in areas of efficiency, therefore it is closer to reality. The classification of filters according to this standard reflects the filter efficiency in real operation better.

Advantages compared to EN779• One global international standard• Measurement range in particle sizes from

0.3 µm to 10 µm, unlike the sizes from 0.4 µm in EN779

• Filters can be better selected according to specific requirements

11

CertificationWe guarantee a 100% quality of our products

Our air filters are designed and manufactured with a main objective, which is to provide clean air in the most efficient way, for a competitive price and with a minimum impact on the environment. Part of our corporate philosophy is to offer our customers the complete care, i.e. also for used filters. We perform ecological disposal of used filters by landfilling or incinerating in appropriate waste incinerators.

Our company own a licence and authorisation to collect used filters from all regions of the Czech Republic. We are a holder of a trade licence in the field of hazardous waste management and, therefore, we may offer our customers all the necessary administrative support in each specific case of collection of used filters.

KS Klima-Service, a.s. is audited and certified according to the requirements of CSN EN ISO 9001:2016 for the following activities including and related to the development, manufacturing and service of air filters and filtration equipment. Service of HVAC equipment.

KS Klima-Service, a.s. is audited and certified according to the requirements of CSN EN ISO 14001:2016 for the following activities including and related to the development, manufacturing and service of air filters and filtration equipment. Service of HVAC equipment.

KS Klima-Service, a.s. is a qualified supplier with an authorisation to:Design, manufacture and service air filters and filtration equipment in compliance with the approved technical conditions and requirements of ČEZ a.s.

12

Legend

PHARMACEU TICAL INDUSTRY, CLE

AN R

OOMS

PLUS SERVICE

H V A C

HIG H EFFICIEN CY

LOW EN E R G Y D E M

AND

HYG IENICALLY HARMLESS

FOO D P R O C E S SIN

G

I N D U S T R Y

Pharmaceutical industry, clean rooms Areas with the highest demands for cleanliness: hospitals, pharmaceutical drugs production plants, medical research establishments, pharmaceutical industry, electrical engineering industry, research institutes.

Industry A filter meeting requirements on suppression of atmospheric dust and harmful odours in industrial facilities – food processing, automotive industry, chemical industry, mechanical engineering.

PLUS service Complete servicing and maintenance of HVAC equipment is provided as part of delivery.

HVAC Heating, ventilation and air-conditioning. A full line of high quality air filters provides optimum ventilation of working, living, commercial and office areas.

High efficiency A highly efficient filter for separation of dust particles, aerosols, oil mist or odours and gases.

Low energy demand Optimum values of the filter – low initial pressure drop, large filtration area, extended duration of use.

Hygienically harmless Hygienic assessment by the National Institute of Public Health of the Czech Republic

Food processing Use in food processing industry – dairies, cheese production, meat processing, beverage industry.

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

13

FILTER MEDIAA wide range of special filter media from polyurethane, synthetic and glass fibres for pre-filtration and main filtration in HVAC units. The filter media are supplied in rolls or cut as required.Filter media from polyurethane are highly resistant to humidity and fully renewable. The structure of the KS PPI filter media (soft foamy matter) is resistant to stress and facilitates exceptionally high air intake flow rates at low pressure dropes.

Filter media from synthetic fibre consist of randomly arranged twisted non-woven fibres of varying thickness, reinforced with a plastic binder (or thermally) into a solid and stable filter fleece. They are used as pre-filters or 1st stage filters in air-conditioning and ventilation units. They are used for filtering coarse and fine dust particles.

Glass-fibre filter media consist of elastic, twisted, randomly arranged glass fibres fixed. As the thickness of the fibre decreases, the filter media gets thicker and finer on the clean air side. This is to achieve a high degree of separation and huge dust

accumulation ability. Some media are saturated with a non-harmful dust binding agent in order to achieve better binding and separation of particles.

Floor filters from recycled paper for separation of paint drops during spraying. The Venturi effect combined with changes in flow of air containing paint particles provide a highly efficient protection. All types consist of two fanfold cardboards. Openings in the front panel are placed asymmetrically against openings in the back panel. When air is passing through the filter, the flow changes in all the three axes. Separated liquid particles are isolated in pockets formed in the back panel with deeper “V” folds. They are used independently or as pre-filters in multi-stage filtration systems of exhaust equipment in paint shops.

14

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS PPI 20/6 and PPI 10/10Filter media – polyurethane

CSN EN ISO 16890ISO COARSE 30%

Filtration class according to EN 779:2012G1

Delivery optionscut-to-size and sheets

Possibility of regenerationyes

Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,000 2,000 3,000 4,000

Volume flow rate [m3/h/m2]

Technical data Unit of measure PPI 20/6 PPI 10/10

Efficiency according to ISO 16890 ISO COARSE 30% ISO COARSE 30%

Filtration class according to EN 779:2012 – G1 G1

Nominal air flow rate m3/h/m2 3,400 3,400

Initial pressure drop at nominal load Pa 20 25

Recommended final pressure drop according to ISO 16890 Pa 200 200

Maximum thermal resistance ˚C 80 80

Filter propertiesThe medium is highly resistant to humidity and fully recoverable. The structure of the PPI is resistant to stress and facilitates exceptionally high air intake flow rates at low pressure dropes. PPI media are reticulated PU foams. The network structure is fully open and does not contain any closed cells. This is achieved during the thermal reticulation process (netting, meshing, cracking, corrugation) when all the cell membranes left after foaming break and merge with cell lamellas.

Types of PPI:• PPI 10 • PPI 20 • PPI 30 • PPI 45 • PPI 60 according to the requirement

Field of applicationThey are used as pre-filters or 1st stage filters in air-conditioning and ventilation units.

MaterialPolyurethane

Waste disposalLandfilling or incineration in authorised incineration plants.

Pressure drop chart PPI 20/6 PPI 10/10

HIG H EFFICIEN CY


AND


PLUS SERVICE H V A C

15

KS 15/100 and KS 15/150Filter media – synthetic fibres



Delivery optionsrolls, cut-to-size

Possibility of regenerationno

Pressure drop chart 15/100 15/150

Filter propertiesThe synthetic filter media consist of randomly arranged twisted non-woven fibres of varying thickness, reinforced with a plastic binder (or thermally) into a solid and stable filter fleece with progressive thickening on outlet side.

Field of applicationThey are used as pre-filters or 1st stage filters in air-conditioning and ventilation units. They are used for filtering coarse dust particles.

MaterialSynthetic fibre


Technical data Unit of measure 15/100 15/150

Efficiency according to ISO 16890 – ISO COARSE 40% ISO COARSE 40%






Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,000 2,000 3,000 4,000


HIG H EFFICIEN CYPLUS SERVICE H V A C


AND

HYG IENICALLY HARMLESS FO

O D P R O C E S SING

FILT

ER

ME

DIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

16

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS B/220 and KS B/290Filter media – synthetic fibres

CSN EN ISO 16890ISO COARSE 50%, ISO COARSE 60%

Filtration class according to EN 779:2012G3, G4



Pressure drop chart B/220 B/290

Filter propertiesThe filter media consist of randomly arranged twisted non-woven fibres of varying thickness, reinforced with a plastic binder (or thermally) into a solid and stable filter fleece with progressive thickening on outlet side. Due to a progressive structure of fibres, the materials offer an extremely low pressure drop and high dust accumulation capacity.




Technical data Unit of measure B/220 B/290







Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,000 2,000 3,000 4,000



G

I N D U S T R YPLUS SERVICE H V A C

HIG H EFFICIEN CY


AND


17

KS 15/350 and KS 15/500Filter media – synthetic fibres





Pressure drop chart 15/350 15/500

Filter propertiesThe filter media consist of randomly arranged twisted non-woven fibres of varying thickness, reinforced with a plastic binder (or thermally) into a solid and stable filter fleece with progressive thickening on outlet side. Due to a progressive structure of fibres, the materials offer an extremely low pressure drop and high dust accumulation capacity.




Technical data Unit of measure 15/350 15/500







Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,000 2,000 3,000 4,000


HIG H EFFICIEN CY I N D U S T R YPLUS SERVICE H V A C


AND



FILT

ER

ME

DIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

18

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS A/300 and KS A/500Filter media – synthetic fibres

CSN EN ISO 16890ISO ePM10 50%

Filtration class according to EN 779:2012M5



Pressure drop chart A/300 A/500

Filter propertiesFilter medium from synthetic fibres of varying thickness, thermally treated and reinforced with a dust binding agent. Thickening of fibres towards the outlet side enables efficient use of the entire thickness for capturing of dust.

Field of applicationThey are used as pre-filters or 1st stage filters in air-conditioning and ventilation units and as ceiling filters in painting and spraying boxes.



Technical data Unit of measure A/300 A/500

Efficiency according to ISO 16890 – ISO ePM10 50% ISO ePM10 50%

Filtration class according to EN 779:2012 – M5 M5





Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,500 2,500



HIG H EFFICIEN CY


AND



19

KS A/560 GFilter media – synthetic fibres, ceiling filter





Pressure drop chart A/560 G

Filter propertiesThe special fine filter media are made from progressively thickening synthetic fibres reinforced with a plastic binder (or thermally) into a solid and stable filter fleece with progressive thickening towards the outlet side. They are fixed by a special protective plastic grid on the clean air side. The material is filled with a dust binding agent.

Field of applicationThey are used as ceiling filters in painting and spraying boxes with the highest demands for cleanliness without releasing fibres.



Technical data Unit of measure A/560G

Efficiency according to ISO 16890 – ISO ePM10 50%

Filtration class according to EN 779:2012 – M5

Nominal air flow rate m3/h/m2 2,500

Initial pressure drop at nominal load Pa 110

Recommended final pressure drop according to ISO 16890 Pa 300

Maximum thermal resistance ˚C 90

Pre

ssur

e dr

op [P

a]

150

120

90

60

30

0 1,500 2,500



HIG H EFFICIEN CY I N D U S T R YPLUS SERVICE H V A C

FILT

ER

ME

DIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

20

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS A/560 G10 – Viledon, Viledon PA 5 micronFilter media – synthetic fibres, ceiling filter

CSN EN ISO 16890ISO ePM10 55%, ISO ePM10 65%

Filtration class according to EN 779:2012M5, M6



Pressure drop chart A/560 G10 Viledon PA 5 micron

Filter propertiesThe special fine filter media of the highest quality are made from progressively thickened synthetic fibres reinforced with a plastic binder (or thermally) into a solid and stable filter fleece with progressive thickening towards the outlet side. The material is filled with a dust binding agent. The medium is fixed with a protective plastic grid preventing release of fibres from the medium.

Field of applicationThey are used as ceiling filters in painting and spraying boxes with the highest demands for cleanliness without releasing fibres.



Technical data Unit of measure A/560 G10 – Viledon Viledon PA 5 micron



Nominal air flow rate m3/h/m2 2 500 1800




Pre

ssur

e dr

op [P

a]

150

120

90

60

30

0 1,500 2,500



HIG H EFFICIEN CY

H V A C

PLUS SERVICE I N D U S T R Y

21

KS Glas 1" and KS Glas 2"Filter media – glass fibres





Pressure drop chart Glas 1" Glas 2"

Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,000 2,000 3,000 4,000


Filter propertiesThe filter medium KS Glas 1“, 2“ consist of elastic, twisted, randomly arranged glass fibres. The medium is saturated with a non-harmful dust binding agent in order to achieve better binding and separation of particles.

Field of applicationThe media are used as pre-filters in air-conditioning and ventilation units, especially to capture coarse dust particles in industry, warehouses and production halls.

MaterialGlass fibre


Technical data Unit of measure Glas 1” Glas 2”







HIG H EFFICIEN CY


AND



FILT

ER

ME

DIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

22

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS Glas C and KS Glas 300Filter media – glass fibres; high thermal resistance

CSN EN ISO 16890ISO ePM10 50%, ISO COARSE 60%

Filtration class according to EN 779:2012M6, G4



Pressure drop chart Glas C Glas 300

Pre

ssur

e dr

op [P

a]

150

120

90

60

30

0 1,000 2,000 3,000 4,000


Filter propertiesThe filter medium Glas C is made from glass fibres and features high thermal resistance up to 200 °C. The clean air side has a special protective layer. The special medium Glas 300 is made from glass fibres with thermal resistance up to 300 °C.

Field of applicationThe Glas C is used for separation of fine dust particles in drying plants and burning furnaces. Glas 300 is used for manufacture of filters for dying plants and burning furnaces in the automotive industry.

MaterialGlass fibre


Technical data Unit of measure Glas C Glas 300

Efficiency according to ISO 16890 – ISO ePM10 50% ISO COARSE 60%

Filtration class according to EN 779:2012 – M6 G4






HIG H EFFICIEN CY

H V A C


23

KS PA Grün 2", KS PA Grün 3", KS PA Grün 4"Filter media – Paint Stop, floor filters

CSN EN ISO 16890ISO COARSE 40%, ISO COARSE 50%, ISO COARSE 60%

Filtration class according to EN 779:2012G2, G3, G4



Pressure drop chart PA 2" PA 3" PA 4"

Pre

ssur

e dr

op [P

a]

50

40

30

20

10

0 1,000 2,000 3,000 4,000


Filter propertiesSeparator of paint aerosols (Paint stop) made from progressively thickened and highly elastic, non-flammable glass fibres. The material features a high paint aerosols accumulation capacity from 3,500 to 5,900 g/m2 and thus a long servicing interval of replacement.

Field of applicationThey are used in particular for adsorption of paint aerosols as so-called floor filters in spraying boxes. The striking green colour of the medium is the "dirty air side", i.e. the inlet side. This is how the filter should be mounted correctly.

MaterialGlass fibre


Technical data Unit of measure PA Grün 2” PA Grün 3” PA Grün 4”

Efficiency according to ISO 16890 – ISO COARSE 40% ISO COARSE 50% ISO COARSE 60%

Filtration class according to EN 779:2012 – G2 G3 G4

Nominal air flow rate m3/h/m2 2,900 2,900 2,900

Initial pressure drop at nominal load Pa 10 12 16

Recommended final pressure drop according to ISO 16890 Pa 80 80 130

Maximum thermal resistance ˚C 200 200 200

Aerosol accumulation capacity g/m2 3,100 3,500 3,900


HIG H EFFICIEN CY


AND


I N D U S T R Y

FILT

ER

ME

DIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

24

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

VS LAK filter mediaFilter media – filter for painting shops for separation of over spraying and colour mist from water-borne and polyurethane paints



Delivery optionsroll of 0.75 × 20 m, roll of 1 × 20 m, roll of 2 × 20 m

cut sizes according to customer's requirements


Pressure drop chart VS LAK

Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,000 2,000 3,000 4,000


Filter propertiesThe filter is made with a filter media from glass fibres randomly arranged with high elasticity and low compressibility. This unique, elastic structure of the medium provides high absorbing capacity of the filter and encourages the operating safety of mounted filters. The medium contains also a special binder that binds excess paint containing a high portion of water component. The striking purple colour of the medium is the "dirty air side", i.e. the inlet side. This is how the filter should be mounted correctly.

Field of applicationThe VS LAK filter is most often used in the first filtration stage and it captures aerosols of excess paint (so-called paint fog), including dry paint or varnish particles.

MaterialGlass fibre

Waste disposalLandfilling

Technical data Unit of measure VS LAK

Efficiency according to ISO 16890 – ISO COARSE 50%

Filtration class according to EN 779:2012 – G3



Thermal resistance of medium ˚C up to 120 ̊ C

Thickness of medium 3" (approx. 7–8 cm)

Replaceable plastic (zinc-coated) frames – in required dimensions, a cut-to-size medium is always part of delivery

Absorbing capacity g/m2 up to 6,000

The filter medium is silicon free


HIG H EFFICIEN CY



AND

I N D U S T R Y

25

KS AFVH – floor pre-filter Filter media – floor filters

Delivery optionssheets of various dimensions (four types) 0.68 m × 10 m 0.75 m × 10 m 0.90 m × 10 m 1 m × 10 m


Filter propertiesProtective filter for capturing of paint drops during spraying. The Venturi effect combined with changes in flow of air containing paint particles provide a highly efficient protection. All types consist of two fanfold cardboards. Openings in the front panel are placed asymmetrically against openings in the back panel. When air is passing through the filter, the flow changes in all the three axes. Separated liquid particles are isolated in pockets formed in the back panel with deeper V folds.

Field of applicationThey are used independently or as pre-filters in multi-stage filtration systems of exhaust equipment in paint shops.

MaterialFolded cardboard from recycled paper


Technical data Unit of measure KS AFVH – standard

Absorbing capacity kg/m2 18

Efficiency at the speed of 1 m/s % 98

Initial pressure drop at speed of 1 m/s for dimensions 592 × 592 Pa 90


Air contaminated with paint drops

Clean air

I N D U S T R YPLUS SERVICE

HIG H EFFICIEN CY


AND


FILT

ER

ME

DIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

26

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS LAK – floor filterFilter media – floor filters

Delivery options

740 (w) × 470 (h) × 47 (d) mmPossibility of regenerationno

Filter propertiesThe filter consists of a W pleat made of a special filtration paper with a flame-retardant. Along the longer side, it is sealed to cardboard side plates with a special polyurethane mixture. It is reinforced by melt adhesive separators.

Field of applicationThe filter is used in filtration systems at exhausts from paint shops with KS PA Grün floor filters or as an final-filter to separate fine particles.

MaterialSpecial filtration paper


Technical data Unit of measure KS LAK


Nominal air flow rate m3/h 1,400

Recommended final pressure drop Pa 250

Filter area m2 4

Maximum thermal resistance °C up to 70

PLUS SERVICE

HIG H EFFICIEN CY


AND

I N D U S T R Y

27

POCKET FILTERSPocket filters are still the most used type of filters in all HVAC units. The name "pocket filter" is derived from its basic structural element, the pocket. The conic shape of pockets gives the best properties to the filter, it allows to use 100% of the filter area and to decrease the total pressure drop of the pocket filter. The new design of pocket filters with conic pockets guaranties energy costs savings thanks to lower pressure dropes and longer service life of the filter.

Pocket filters are manufactured in numerous alternative designs. The efficiency of ISO COARSE is up to ISO ePM1 according to ISO 16890. The basic structural element of the filter is the filter medium. The most commonly used medium is a synthetic medium. Another possibility is a glass fibre medium or a specially adapted medium for potentially explosive atmospheres. Pocket filters with an absorption medium may be used in environments where it is necessary to remove odours.

Development of filter media for atmospheric dust brings new solutions, e.g. nanofibres media, media with low pressure dropes, media with high absorbing capacity, media with antibacterial treatment.

The pocket filter frame is also made in various designs. The most common ones are made of plastic or zinc-coated. Another possibility is a stainless steel version of the frame. Pocket filter separators are made entirely from plastic, wood or zinc-coated.

The range of sizes and design variants of pocket filters is almost unlimited which makes them suitable for use in HVAC equipment, both in older units and in new, modern air filtration equipment. They are suitable for e.g. food-processing, chemical, pharmaceutical industry, electric power plants, painting boxes, hospitals, offices, hotels and other premises.

28

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS PAK 25 and KS PAK 35Pocket filters

Pressure drop chart KS PAK 25, KS PAK 35

Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,000 2,000 3,000 4,000

Volume flow rate [m3/h] for dimensions 592 × 592 × 360 mm



Delivery optionsstandard EURO line, non-standard dimensions according to customer's requirements


Filter propertiesThe filters are made from synthetic media with progressive structure. The filter pockets of conical shape with stitching and sealing are mounted in a frame. The frame is made of plastic and separators are wooden or plastic. On demand, it is possible to supply a zinc-coated frame and metallic separators. Large filtration area and high absorbing capacity.

Field of applicationThey are used as pre-filters or main filters to separate coarse dust in ventilation and air-conditioning units.



Technical data Unit of measure KS PAK 25 592 × 592 × 360 mm

KS PAK 35 592 × 592 × 360 mm



Nominal air flow rate for a filter of dimensions 592 × 592 × 360 mm m3/h 3,400 3,400



Maximum thermal resistance – metal frame (plastic frame) ˚C 80 80


HIG H EFFICIEN CY


AND



29

Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,000 2,000 3,000 4,000


KS PAK 35 LPocket filter for high loads

Pressure drop chart KS PAK 35L





Filter propertiesThe pocket filter KS PAK 35L is specially designed to absorb coarse dust in order to achieve an extremely high absorbing capacity and extended deployment time. The filter is made from a new synthetic filter media that uses progressive thickening of fibres and allows receiving and efficient accumulating of dust particles for the whole period of service life of the filter. The optimised and robust structure of the filter guarantees very low pressure dropes for the whole period of use of the filter.

Field of applicationThe pocket filters KS PAK 35L are ideal for use as a pre-filter or a main filter in HVAC units in areas with high dust nuisance. It may also be used as a pre-filter in paint shops and spraying boxes in the air intake and outlet sides.



Technical data Unit of measure KS PAK 35L 592 × 592 × 360 mm



Nominal air flow rate for a filter of dimensions 592 × 592 × 360 mm m3/h 3,400



Absorbing capacity (dust accumulation capacity) g up to 1,400

Maximum thermal resistance – metal frame (plastic frame) ˚C 80

HIG H EFFICIEN CY


AND



I N D U S T R Y

FILT

ER M

EDIA

PO

CK

ET

FILT

ER

S

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

30

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS PAK 45 and KS PAK 55Pocket filters

Pressure drop chart KS PAK 45 KS PAK 55





Filter propertiesThe modern filter medium from synthetic fibres arranged in conical pockets enables to manufacture pocket filters with long service-life at optimum pressure dropes and low energy costs. As standard, the filters are supplied in a completely combustible design with a plastic frame and plastic or wooden separators or, if requested, with a zinc-coated frame and metal separators.

Field of applicationThey are used as the second or the only stage of filtration for separation of fine dust in the health sector, restaurants, hotels, etc.




KS PAK 55 592 × 592 × 500 mm

Efficiency according to ISO 16890 – ISO ePM10 65% ISO COARSE 80%


Nominal air flow rate for a filter of dimensions 592 × 592 × 625 (500) mm m3/h 3,400 3,400




Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,000 2,000 3,000 4,000Volume flow rate [m3/h]

for dimensions 592 × 592 × 625 (500) mm

I N D U S T R Y


AN R

OOMS


HIG H EFFICIEN CY


AND


31

KS PAK 62Pocket filter

Pressure drop chart KS PAK 62





Filter propertiesThe modern filter medium from synthetic fibres arranged in conical filter pockets with stitching and sealing enables to manufacture pocket filters with long service-life at optimum pressure dropes and with low energy costs. As standard, the filters are supplied in a completely combustible design with a plastic frame and plastic or wooden separators or, if requested, with a zinc-coated frame and metal separators.











Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,000 2,000 3,000 4,000


I N D U S T R Y


AN R

OOMS


HIG H EFFICIEN CY


AND


FILT

ER M

EDIA

PO

CK

ET

FILT

ER

S

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

32

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9




Filtration class according to EN 779:2012F7



Filter propertiesThe modern filter medium from synthetic fibres arranged in automatically sewn conical pockets enables to manufacture pocket filters with long service-life at optimum pressure dropes and low energy costs. As standard, the filters are supplied in a completely combustible design with a plastic frame and plastic or wooden separators or, if requested, with a zinc-coated frame and metal separators.

Field of applicationThey are used as the second or the last stage of filtration for separation of fine dust in telecommunications central offices, food-processing industry, hospitals, etc.





Filtration class according to EN 779:2012 – F7





Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,000 2,000 3,000 4,000



AN R

OOMS


HIG H EFFICIEN CY


AND


33


Pre

ssur

e dr

op [P

a]

120

100

80

60

40

20

0 1,000 2,000 3,000 4,000 5,000


KS PAK 85 NEWPocket filters – improved efficiency




Technical data Unit of measure KS PAK 85 NEW 592 × 592 × 635 mm






Filter propertiesThe KS PAK 85 NEW pocket filter is made from polyester with a special inner structure. The mechanically bound fibres prevent spreading of and provide resistance to humidity and potentially harmful bacteria and chemicals. The inner surface provides much higher absorption capacity of dust particles. These qualities of the pocket filter do not compromise its performance; the performance level is better in each filtration stage. The KS PAK NEW pocket filter meets the requirements of ISO 16890 for the values of the mean efficiency level (Em), ePM1 55%.

Field of applicationThe filter is used as pre-filter or main filter for absorption of fine dust in air-conditioning systems in food-processing industry, pharmaceutical operations, hospitals and other areas.


AN R

OOMS


HIG H EFFICIEN CY


AND


FILT

ER M

EDIA

PO

CK

ET

FILT

ER

S

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

34

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9




Filtration class according to ČSN EN 779:2012F8














Pre

ssur

e dr

op [P

a]

150

120

90

60

30

0 1,000 2,000 3,000 4,000




AN R

OOMS


HIG H EFFICIEN CY


G

I N D U S T R Y

35




Filtration class according to ČSN EN 779:2012F9














Pre

ssur

e dr

op [P

a]

150

120

90

60

30

0 1,000 2,000 3,000 4,000



PLUS SERVICE


AN R

OOMS

H V A C

HIG H EFFICIEN CY


AND

FILT

ER M

EDIA

PO

CK

ET

FILT

ER

S

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

36

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS PAK PremiumHigh filtration efficiency – Extremely long deployment times



Filter propertiesKS PAK PREMIUM is a highly efficient filter made of a new multi-layer filter medium which enables, by its arrangement, up to double absorption capacity compared to commonly used synthetic filter media. A special design of the media increases the filter area by 2.4 times. For example, a pocket filter in the F7 filtration class with a size of 592 × 592 × 635 mm / 8 pockets has a standard filter area of approximately 6.2 m2, while the KS PAK PREMIUM filter using the new filter medium has a filter area of approximately 14.8 m2.

Field of applicationThe new KS PAK PREMIUM pocket filter is developed especially for capturing fine dust and aerosols at the inlets of air into office buildings, industrial halls, painting lines, and it is also used as a preliminary filter of HVAC units for health-care facilities, clean rooms and pharmaceutical facilities. The KS PAK PREMIUM filters are ideal for applications requiring high flow rate, long service life and excellent separability. The unique design of the filter allows significant decreasing of initial pressure dropes, resulting in very low energy costs of the filter at full load.

Informative comparative table of EN 779 and ISO 16890 for KS PAK PREMIUM 592 × 592 × 635 mm

Filtration class of EN 779ISO 16890 Nominal air flow rate Initial pressure drop

PM10 PM2.5 PM1 m³/h Pa

M6 30% 5% <5% 3,400 60

F7 85% 60% 50% 3,400 75

F8 95 % 80% 75% 3,400 110

F9 95 % 90% 85% 3,400 140

Pres

sure

dro

p [P

a]

150140130120110100

908070605040302010

0 250 500 750 1,000 1,250 1,500 1,750 2,000 2,250 2,500 2,750 3,000 3,250 3,500

Volume flow rate [m3/h]

Pressure drop chart KS PAK PREMIUM, M6 KS PAK PREMIUM, F7 KS PAK PREMIUM, F8 KS PAK PREMIUM, F9

PLUS SERVICE


AN R

OOMS

H V A C


AND

HIG H EFFICIEN CY


37

KS PAK 45 and KS PAK 62Pocket filters – glass fibre


CSN EN ISO 16890ISO ePM10 65%, ePM10 55%

Filtration class according to EN 779:2012M5, M6



Filter propertiesPocket filters PAK 45 and 62 are made from glass fibres. The filter pockets of conical shape with stitching and sealing are mounted in a frame. As standard, the filters are supplied in a completely combustible design with a plastic frame and plastic or wooden separators or, if requested, with a zinc-coated frame and metal separators.


MaterialGlass fibre



KS PAK 62 592 × 592 × 625 mm







Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,000 2,000 3,000 4,000

Volume flow rate [m3/h] for dimensions 592 × 592 × 625 mmPLUS SERVICE H V A C

HIG H EFFICIEN CY


AND


I N D U S T R Y

FILT

ER M

EDIA

PO

CK

ET

FILT

ER

S

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

38

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS PAK 85Pocket filters – glass fibre






Filter propertiesPocket filters KS PAK 85 are made from glass fibres, the filter medium is reinforced with a synthetic bearing layer on the clean air intake side to prevent release of glass fibres. The filter pockets of conical shape with stitching and sealing are mounted in a frame. As standard, the filters are supplied in a completely combustible design with a plastic frame and plastic or wooden separators or, if requested, with a zinc-coated frame and metal separators.


MaterialGlass fibre









Pre

ssur

e dr

op [P

a]

150

120

90

60

30

0 1,000 2,000 3,000 4,000



AN R

OOMS


HIG H EFFICIEN CY


AND


39

KS PAK 95 and KS PAK 98Pocket filters – glass fibre


CSN EN ISO 16890ISO ePM1 75%, ISO ePM1 80%

Filtration class according to EN 779:2012F8, F9



Filter propertiesPocket filters KS PAK 95 and KS PAK 98 are made from glass fibres, the filter medium is reinforced with a synthetic bearing layer on the clean air intake side to prevent release of glass fibres. The filter pockets of conical shape with stitching and sealing are mounted in a frame. As standard, the filters are supplied in a completely combustible design with a plastic frame and plastic or wooden separators or, if requested, with a zinc-coated frame and metal separators.


MaterialGlass fibre



KS PAK 98 592 × 592 × 635 mm


Filtration class according to EN 779:2012 – F8 F9





180

Pre

ssur

e dr

op [P

a]

150

120

90

60

30

0 1,000 2,000 3,000 4,000



HIG H EFFICIEN CY


AND


I N D U S T R Y

FILT

ER M

EDIA

PO

CK

ET

FILT

ER

S

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

40

KS PAK AST/2 and KS PAK ASTPocket filters – antistatic design

Pressure drop chart KS PAK AST/2 KS PAK AST

CSN EN ISO 16890ISO ePM10 50%, ISO ePM2.5 65%

Filtration class according to EN 779:2012M5, F7, other filtration classes on request

Delivery optionsstandard EURO line, non-standard dimensions according to customer's requirements, other types upon request


Filter propertiesPocket filters KS PAK AST and AST/2 are made from a special antistatic, electrostatically conductive filter medium that meets the most demanding parameters for use in potentially explosive environments. The V-shaped sewn pockets are mounted in a U-section front frame from using a new technology to guarantee electrostatic properties of the filter. The frames are zinc-coated and they have a grounding terminal (M5 nut bolt). Certified by Physical-Technical Testing Institute – Radvanice.

Field of applicationThey are used in explosive environments, such as: paint shops, chemical plants and other specialised facilities.

MaterialSpecial filter media


Technical data Unit of measure KS PAK AST/2 592 × 592 × 500 mm

KS PAK AST 592 × 592 × 500 mm

Efficiency according to ISO 16890 – ISO ePM10 50% ISO ePM2.5 65%

Filtration class according to EN 779:2012 – M5 F7





Pre

ssur

e dr

op [P

a]

150

120

90

60

30

0 1,000 2,000 3,000 4,000


As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

HIG H EFFICIEN CY


AND



41

FRAME FILTERSFrame filters are very variable and, for their low depth, they are often a solution in limited spaces. The filter medium of frame filters may be made from both synthetic and glass fibre media. Another variant is an aluminium intertwined medium or a polypropylene medium.

The polypropylene filter medium is 100% hydrophobic and contains a mixture of polypropylene and other polymers specially mixed to achieve higher strength in comparison with traditional materials.

The filter frame is made from a waterproof cardboard, zinc-coated metal, stainless steel or plastic.

The most suitable variant of the separator is looked for in order to strengthen and increase stability of the frame filter. In order to strengthen the filter, the all-cardboard design uses cardboard grids covering the whole surface. This variant is the most common and the most demanded.

In some filters, the medium is normally sealed in the frame using a hot-melt system. Some types of frame filters are recoverable. They are used in particular in ventilation and air-conditioning of production halls, office and assembly rooms, telecommunication centres, health facilities, airport terminals.

42

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS Z1/2", KS Z1" and KS Z2"Frame filters

Pressure drop chart Z1/2" Z1 Z2

Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,000 2,000 3,000 4,000

Volume flow rate [m3/h] for dimensions 592 × 592 mm



Delivery optionsdimensions according to customer's requirements


Filter propertiesThe filter elements KS-Z are made from a glass fibre, progressively thickened filter media that is mounted in a stable cardboard or plastic frame. Both sides of the medium are covered with a perforated sheet metal, cardboard grid. The filter media is impregnated with a special dust binding agent. The filter elements KS-Z have an excellent dust particles accumulating properties with very low pressure dropes.

Field of applicationThey are used in particular as pre-filters in air-conditioning and HVAC units. They are employed in ventilation of industrial plants, social rooms, restaurants and hotels.

MaterialGlass fibre


Technical data Unit of measure Z ½” Z 1” Z 2”



Nominal air flow rate for a filter of dimensions 592 × 592 mm m3/h 3,400 3,400 3,400






AND


I N D U S T R Y

43

Filter propertiesThe frame filters KS PR with a replaceable filter medium are used for absorption of coarse and fine dust in air-conditioning and ventilation units. The filter medium is placed through metal separators inserted into a robust zinc-coated frame. On the air outlet side, there is a wire grid preventing release of the medium and ensuring high operating safety of the filter. The medium inserted between separators is fixed with two wire press springs on the air outlet side.

KS PR NEWFrame filter

CSN EN ISO 16890ISO COARSE – ISO ePM10

Filtration class according to EN 779:2012G2–G4, M5


Possibility of regenerationyes – replaceable filter medium

Technical data Unit of measure 50/G2 50/G3 50/G4 50/M5 100/G2 100/G3 100/G4 100/M5 150/G2 150/G3 150/G4 150/M5

Efficiency according to ISO 16890 –

ISO COARSE

40%

ISO COARSE

50%

ISO COARSE

60%

ePM 10 50%

ISO COARSE

40%

ISO COARSE

50%

ISO COARSE

60%

ePM 10 50%

ISO COARSE

40%

ISO COARSE

50%

ISO COARSE

60%

ePM 10 50%

Nominal air flow rate for dimensions 592 × 592 mm

m3/h 3,400 3,400 3,400 1,700 3,400 3,400 3,400 1,700 3,400 3,400 3,400 1,700

Initial pressure drop at nominal load Pa 55 80 120 95 60 90 140 85 60 90 150 91

Recommended final pressure drop Pa 200 200 200 300 200 200 200 300 200 200 200 300

Maximum thermal resistance ˚C 90 90 90 90 90 90 90 90 90 90 90 90

Field of applicationVentilation and air-conditioning of production halls, office buildings and assembly rooms, telecommunication central offices, health facilities, airport terminals, etc.



PLUS SERVICE

HIG H EFFICIEN CY

H V A C


AND

I N D U S T R Y


FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FIL

TER

S

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

44

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS PL-25Frame filter

Pressure drop chart G2 G3 G4 M5

Pre

ssur

e dr

op [P

a]

150

120

90

60

30

0 1,000 2,000 3,000 4,000



Filtration class according to EN 779:2012G2, G3, G4, M5


Possibility of regenerationyes, partially

Filter propertiesA cut-to-size element of the filter medium from synthetic fibres is inserted into a solid and stable frame from zinc-coated sheet metal. On the clean air intake side, the filter medium is covered with a zinc-coated protective grid. The medium is fixed by means of a steel clamp on the inlet side of the filter. Depending on the type of filtration, it is possible to supply the KS PL filters with glass fibre medium or with a special medium KS CARB with activated carbon.

Field of applicationOverhead air-conditioning units and intake devices.



Technical data Unit of measure KS PL-25 KS PL-25 KS PL-25 KS PL-25

Efficiency according to ISO 16890 – ISO COARSE 40% ISO COARSE 50% ISO COARSE 60% ISO ePM10 50%

Filtration class according to EN 779:2012 – G2 G3 G4 M5

Nominal air flow rate m3/h/m2 3,400 3,400 3,400 3,400

Initial pressure drop at nominal load Pa 55 80 110 186

Recommended final pressure drop according to ISO 16890 Pa 200 200 200 200

Maximum thermal resistance ˚C 90 90 90 90

PLUS SERVICE

HIG H EFFICIEN CY

H V A C


AND

I N D U S T R Y


45

KS PL-5Double-sided planar frame filter

Pressure drop chart PL-5, G2

Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,500 3,000 4,500 6,000






Filter propertiesThe filter media KS 15/60 is sewn on sides to make a bag that is inserted on a wire frame (5 mm).

Field of applicationOverhead and wall-mounted air-conditioning units and intake filter systems. Fancoil devices, door screens



Technical data Unit of measure KS PL-5







PLUS SERVICE

HIG H EFFICIEN CY

H V A C


AND

I N D U S T R Y


FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FIL

TER

S

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

46

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS PL-10 and KS PL-20Planar frame filters for FANCOIL

Pressure drop chart G2 G3 G4

110

Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,500 3,000 4,500



Filtration class according to EN 779:2012G2, G3, G4



Filter propertiesA cut-to-size element of the filter media of suitable filtration class is inserted into a solid and stable frame from zinc-coated sheet metal.

Field of applicationOverhead and wall-mounted air-conditioning units and Fancoil units.



Technical data Unit of measure KS PL-10 and KS PL-20 KS PL-10 and KS PL-20 KS PL-10 and KS PL-20



Nominal air flow rate m3/h/m2 3,400 3,400 3,400




HIG H EFFICIEN CY


AND



47

KS PL-FOne-sided planar frame filter for FANCOIL

Pressure drop chart KS PL-F

Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,500 3,000 4,500 6,000






Filter propertiesThe filtration medium type KS 15/60 is attached to a wire frame (5 mm) by stitching.

Field of applicationOverhead and wall-mounted air-conditioning units and Fancoil units.



Technical data Unit of measure KS PL-F







PLUS SERVICE

HIG H EFFICIEN CY

H V A C


AND

I N D U S T R Y


FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FIL

TER

S

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

48

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS W 50, KS W 100, and KS W 150Frame filters "Z-LINE"

Pressure drop chart KS W 50/4, KS W 150/4 KS W 100/4

Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,000 2,000 3,000 4,000






Filter propertiesFrame filters KS-W are made of folded synthetic filter media. The folded medium is mounted in a solid cardboard frame with a cardboard grid and sealed with a hot-melt system. Due to high flow rates, the filter is reinforced with a spacer pad. Possibility to manufacture with a zinc-coated or plastic frame.

Field of applicationAssembly rooms, laboratories, hospitals



Technical data Unit of measure KS W 50/4 KS W 100/4 KS W 150/4



Nominal air flow rate for a filter element of dimensions 592 × 592 mm m3/h 3,400 3,400 3,400





HIG H EFFICIEN CY


AND


49

KS W 50, KS W 100 and KS W 150Frame filters "Z-LINE"

Pressure drop chart KS W 50/5 KS W 100/5 KS W 150/5

Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,000 2,000 3,000 4,000


CSN EN ISO 16890ISO COARSE >90%




Filter propertiesFrame filters KS-W are made of folded synthetic filter media. The folded medium is mounted in a solid cardboard frame with a cardboard grid and sealed with a hot-melt system. Due to high flow rates, the filter is reinforced with a spacer pad. Possibility to manufacture with a zinc-coated or plastic frame.

Field of applicationAssembly rooms, laboratories, hospitals



Technical data Unit of measure KS W 50/5 KS W 100/5 KS W 150/5

Efficiency according to ISO 16890 – ISO COARSE >90% ISO COARSE >90% ISO COARSE >90%

Filtration class according to EN 779:2012 – M5 M5 M5

Nominal air flow rate for a filter element of dimensions 592 × 592 mm m3/h 3,400 3,400 3,400




PLUS SERVICE

HIG H EFFICIEN CY

H V A C


AND

I N D U S T R Y


FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FIL

TER

S

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

50

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS MPS, M6Frame filter

Pressure drop chart MPS 25, M6 MPS 48, M6 MPS 96, M6

120

Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 200 400 600 800 1,000 1,200






Filter propertiesFrame filters KS MPS use a filter medium made of the glass fibre sub-micron paper. Thick, multi-layered arrangement of the filtering fibres provides the filter medium with optimal characteristics for particle separation. The unique properties of this filter medium are also guaranteed by automated production where the medium is folded using the “mini-pleat” system, which guarantees an optimum air flow distribution and low pressure dropes. These parameters of the filter significantly affect savings in energy costs during the filter operation in HVAC units. The filter medium is mounted into a solid plastic, zinc-plated or cardboard frame and sealed using a "hot-melt" system; the MDF design upon request.

Field of applicationFor separation of coarse and fine dust in social areas, restaurants, health facilities and laboratories, in the electrical engineering industry, telecommunication exchanges, control centres and airports.

MaterialPapers from fine glass microfibres of various separation or penetration levels are used as filter media. The filter medium is folded into a pleat

and the number and height of folds is optimally dimensioned for operating conditions. Separators consist of a melt adhesive, which provides high stability of the entire filter element.


Technical data Unit of measure KS MPS 25, M6 KS MPS 48, M6 KS MPS 96, M6

Efficiency according to ISO 16890 – ISO ePM10 70% ISO ePM10 70% ISO ePM10 70%

Filtration class according to EN 779:2012 – M6 M6 M6

Nominal air flow rate for a filter element 592 × 592 mm m3/h 1,200 3,400 3,400





AN R

OOMS


HIG H EFFICIEN CY


AND


51

KS MPS, F7Frame filter

Pressure drop chart MPS 25, F7 5 MPS 48, F7 MPS 96, F7

120

Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 200 400 600 800 1,000 1,200











Technical data Unit of measure KS MPS 25, F7 KS MPS 48, F7 KS MPS 96, F7


Filtration class according to EN 779:2012 – F7 F7 F7






AN R

OOMS


HIG H EFFICIEN CY


AND


FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FIL

TER

S

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

52

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS MPS, F9Frame filter

Pressure drop chart MPS 25, F9 MPS 48, F9 MPS 96, F9

120

Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 200 400 600 800 1,000 1,200











Technical data Unit of measure KS MPS 25, F9 KS MPS 48, F9 KS MPS 96, F9


Filtration class according to EN 779:2012 – F9 F9 F9






AN R

OOMS


HIG H EFFICIEN CY


AND


53

KS MPP 96/5Frame filter with polypropylene medium

Pressure drop chart KS MPP 96/5

Pre

ssur

e dr

op [P

a]

200

160

120

80

40

0 1,000 2,000 3,000 4,000

Volume flow rate 592 × 592 × 96 mm [m3/h]



Delivery optionsdimensions according to the customer's requirements, frame filter depth from 30 to 96 mm


Filter propertiesThe filter medium is mounted and sealed into a solid plastic or cardboard frame and sealed using a "hot-melt" system. The filter materials of various filtration classes differ in colour.

Large filtration area – long service life• high air flow rate• new, "mini-pleat" type filter medium from a 100%

polypropylene

High mechanical strength of the filter• easy mounting and dismounting in HVAC devices• high dust accumulation capacity

Low structural depth• stable cardboard or plastic frame• low weight, low transport volume• fully combustible filter

Field of applicationThey are used as the second or the only filtration stage in all HVAC units.

MaterialMinipleat medium from polypropylene

Waste disposalIncineration in appropriate incinerators, landfilling.

Technical data Unit of measure KS MPP 96/5



Nominal air flow rate for a filter element 592 × 592 × 96 mm m3/h 3,400




H V A C

HIG H EFFICIEN CY


AND



FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FIL

TER

S

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

54

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS MPP 96/6 and KS MPP 96/7Frame filters with polypropylene medium

Pressure drop chart KS MPP 96/6 KS MPP 96/7

Pre

ssur

e dr

op [P

a]

200

160

120

80

40

0 1,000 2,000 3,000 4,000


CSN EN ISO 16890ISO ePM10 55%, ISO ePM2.5 65%

Filtration class according to EN 779:2012M6, F7



Filter propertiesThe filter medium is mounted into a solid plastic or cardboard frame and sealed using a "hot-melt" system. The filter materials of various filtration classes differ in colour.


polypropylene



Field of applicationThey are used for absorption of fine dust in assembly rooms, health facilities, laboratories, etc.


Waste disposalIncineration in appropriate incinerators, landfilling.

Technical data Unit of measure KS MPP 96/6 KS MPP 96/7

Efficiency according to ISO 16890 – ISO ePM10 55% ISO ePM2.5 65%

Filtration class according to EN 779:2012 – M6 F7

Nominal air flow rate for a filter element 592 × 592 × 96 mm m3/h 3,400 3,400




PLUS SERVICE I N D U S T R YH V A C

HIG H EFFICIEN CY


AND


55

KS MPP 96/8 and KS MPP 96/9Frame filter with polypropylene medium

Pressure drop chart KS MPP 96/8 KS MPP 96/9

Pre

ssur

e dr

op [P

a]

200

160

120

80

40

0 1,000 2,000 3,000 4,000


CSN EN ISO 16890ISO ePM2,5 65%, ISO ePM2,5 80%

Filtration class according to EN 779:2012F8, F9



Filter propertiesThe filter medium is mounted into a solid plastic or cardboard frame and sealed using a "hot-melt" system. The filter materials of various filtration classes differ in colour.


polypropylene



Field of applicationThey are used for absorption of fine dust in electrical engineering industry, airports, etc.


Waste disposalIncineration in appropriate incinerators.

Technical data Unit of measure KS MPP 96/8 KS MPP 96/9

Efficiency according to ISO 16890 – ISO ePM2.5 65% ISO ePM2.5 80%

Filtration class according to EN 779:2012 – F8 F9

Nominal air flow rate for a filter element 592 × 592 × 96 mm m3/h 3,400 3,400





AN R

OOMS

H V A C

PLUS SERVICE

HIG H EFFICIEN CY


AND


I N D U S T R Y

FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FIL

TER

S

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

56

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS GTA 200 and KS GTA 300Frame filters – filters for high temperatures

Pressure drop chart GTA 200 GTA 300

Pre

ssur

e dr

op [P

a]

150

120

90

60

30

0 250 500 750 1,000



Filtration class according to EN 779:2012M6, G4

Delivery options480 (w) × 480 (h) × 14 (d) mm 592 (w) × 592 (h) × 14 (d) mm non-standard dimensions according to the customer's requirements


Filter propertiesThe filter medium of the special GTA 200 filter element for high temperatures is made of GLAS C material pressed into a double-sided protecting grid made of aluminium expanded metal. Thermal resistance up to 190 °C. The special GTA 300 filter elements for high temperatures are made of superfine glass fibre filter medium pressed in to a double-sided protecting grid made of aluminium expanded metal. Thermal resistance up to 300 °C.

Field of applicationSeparation of coarse (GTA 300) and fine (GTA 200) dust in inlets into drying and painting equipment. Calcining equipment in the automotive industry.

MaterialGlass fibre + AL grid

Waste disposalLandfilling or incineration in authorised incineration plants after the separation of metal parts.

Technical data Unit of measure GTA 200 GTA 300


Filtration class according to EN 779:2012 – M5 G4

Nominal air flow rate for a filter element of dimensions 592 × 592 mm m3/h 600 1,000





HIG H EFFICIEN CY


AND


57

KS MA 12.5, KS MA 20, KS MA 25 and KS MA 45Frame filters – metal filter elements

Pressure drop chart MA 12,5 MA 20 MA 25 MA 45

Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,000 2,000 3,000 4,000





Possibility of regenerationyes

Filter propertiesSeveral layers from a special aluminium meshed intertwined medium is inserted into a U-section aluminium frame. The filter medium is protected from both sides by a solid aluminium expanded metal grid.

Field of applicationAbsorption of grease and oil aerosols in exhaust equipment in kitchens, bakeries, smoke houses, grill restaurants. Separation of the coarsest dust particles in foundries, metallurgical plants and the steel industry.

MaterialAluminium / stainless steel

Waste disposalLandfilling

Technical data Unit of measure MA 12,5 MA 20 MA 25 MA 45

Efficiency according to ISO 16890 – ISO COARSE 40% ISO COARSE 50% ISO COARSE 50% ISO COARSE 50%

Filtration class according to EN 779:2012 – G2 G3 G3 G3

Nominal air flow rate for a filter element of dimensions 592 × 592 mm m3/h 3,400 3,400 3,400 3,400

Initial pressure drop at nominal load Pa 32 45 56 80

Recommended final pressure drop according to ISO 16890 Pa 200 200 200 200

Maximum thermal resistance ˚C 200 200 200 200

HIG H EFFICIEN CY


AND


H V A C


FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FIL

TER

S

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

58

COMPACT FILTERSCompact filter elements represent a modern and efficient solution of fine dust separation. The compact filter is made of a robust plastic frame with minipleat filter pleats sealed inside. The unique structure of the filter allows to decrease significantly initial pressure dropes. The filter has very low energy costs at full load.

The standard compact filters are suitable for use in all common mounting frames for pocket filters. All the filter parameters comply with requirements of ISO 16890 and EN 1822. The all-plastic design allows for smooth disposal – the filter is fully combustible. It is best suited for use in all air-conditioning and ventilation devices as final-filters or pre-filters and as microparticle filters. It may be used in normal, as well as in special conditions with higher service life, safety, variability and thermal resistance requirements.

The TMP and TMPC compact filters separate air impurities in air intake systems of rotary compressors and offer a perfect protection against pollution, corrosion and erosion of key turbine components. TMP filters are most suited for use in gas turbines, diesel units, compressors and air-conditioning devices in power plants, because they feature low pressure dropes and long service life. Combined with the range of synthetic fibre pocket filters, they offer an optimum ratio of separation level to service life at the lowest pressure dropes.

The compact filters are supplied in the three designs: KS FP V3 and FP V4 with the efficiency of ePM10 75% to ePM1 80% and KS FP E10 – H13.

A special design of the KS TMP and KS TMPC filters is offered in filtration classes from E10.

59

KS FP V4 M6–F9Compact filters

Pressure drop chart M6 F7 F9

CSN EN ISO 16890ISO ePM10 75%, ISO ePM1 55%, ISO ePM1 70%, ISO ePM1 80%

Filtration class according to EN 779:2012M6, F7, F8, F9

Delivery options592 (w) × 592 (h) × 292 (d) mm 287 (w) × 592 (h) × 292 (d) mm 490 (w) × 592 (h) × 292 (d) mm


Filter propertiesThe compact filter elements represent a modern and efficient solution of dine dust separation. The glass fibre medium (special filter paper) forms V-shaped pleats and is inserted into a plastic frame. An excellent output / price ratio.

Field of applicationIn all air-conditioning and ventilation devices as final-filters or pre-filters for microparticles.

MaterialA glass submicr. filter paper, frame: halogen-free ABS plastic

Waste disposalIncineration without emissions of harmful substances, landfilling.

Technical data Unit of measure KS FP


Filtration class according to EN 779:2012 – M6 F7 F9

Nominal air flow rate for a filter element of dimensions 592 × 592 × 292 mm m3/h 3,400 3,400 3,400



Maximum thermal resistance ˚C NT < 75; HT < 120

NT:�standard�temperature;�HT:�special�design�for�higher�temperature�(not�supplied�with�the�KS�FP�M6�model�

Pre

ssur

e dr

op [P

a]

100

80

60

40

20

0 1,000 2,000 3,000 4,000



AN R

OOMS




AND

HIG H EFFICIEN CY

FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ER

S

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

60

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS FP V3 M6–F9Compact filter

Pressure drop chart M6 F7 F9

CSN EN ISO 16890ISO ePM10 75%, ISO ePM1 55%, ISO ePM1 80%

Filtration class according to EN 779:2012M6, F7, F9

Delivery options287 (w) × 592 (h) × 292 (d) mm 490 (w) × 592 (h) × 292 (d) mm 592 (w) × 592 (h) × 292 (d) mm 287 (w) × 287 (h) × 292 (d) mm upon request


Filter propertiesThe design of the compact filter with 3 cassettes V3 achieves lower initial pressure dropes compared with the 4 cassette compact filters type. When these filters are used as replacement for pocket filters, the longer time of use with lower pressure dropes guarantee substantial savings of energy costs. Handles situated in the upper part of the compact filter enable easier handling and elimination of damage to the filter medium.

Field of applicationPre-filtering and main filtering of fine dust particles and aerosols with the efficiency of iePM10 75% to ePM1 80% in all HVAC devices in office buildings, hospitals, computer centres, pharmaceuticals production plants, precision mechanics and food-processing plants.

MaterialGlass submicr. filter paper, robust ABS plastic frame, thermoplastic separators.


Technical data Unit of measure KS FP V3


Filtration class according to EN 779:2012 – M6 F7 F9




Operating conditions max. relative air humidity 100 %, thermally resistant to 65 °C, for a short period max. up to. 80 °C

Pre

ssur

e dr

op [P

a]

150

120

90

60

30

0 1,000 2,000 3,000 4,000 5,000

Volume flow rate [m3/h] for dimensions 592 × 592 × 292 mmPLUS SERVICE H V A C

HIG H EFFICIEN CY


I N D U S T R Y


AND

61

KS FP E10-H13Compact filter

Pressure drop chart E10 E11 H13

Filtration class according to EN 1822:2010E10, E11, H13

Delivery options592 (w) × 592 (h) × 300 (d) mm 287 (w) × 592 (h) × 300 (d) mm 490 (w) × 592 (h) × 300 (d) mm


Filter propertiesCompact filter elements in filtration classes E10, E11, H13 represent a new microparticles filtration solution. Advantages: high flow rate and standard dimensions, large filtering area 20 m2, excellent dust absorbing capacity, optimum distribution of air flow - energy savings, possibility to use the filters in standard frames in air-conditioning units with high cleanliness demands.

Field of applicationIn all HVAC devices as final-filters.

MaterialA glass submicr. filter paper, ABS plastic frame


Technical data Unit of measure KS FP

Filtration class according to EN 1822:2010 – E10 E11 H13

Total value for MPPS particles according to EN 1822:2010 % >− 85 >− 95 >− 99.95




Maximum thermal resistance ˚C NT < 75; HT < 120

NT:�standard�temperature;�HT:�special�design�for�higher�temperature�

Pre

ssur

e dr

op [P

a]

300

250

200

150

100

50

0 1,000 2,000 3,000 4,000 5,000Volume flow rate [m3/h]

for dimensions 592 × 592 × 300 mmPHARMACEU TICAL INDUSTRY, C

LEAN

ROOMS


HIG H EFFICIEN CY


AND


FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ER

S

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

62

ABSOLUTE FILTERS FOR MICROPARTICLESThe absolute filters for microparticles in filtration classes E10 – H14 and U15 – U17 are used in intake, circulating and exhaust air devices with the highest air cleanliness and sterility requirements. By using ultra-soft glass microfibres and precise folding, the EPA, HEPA and ULPA filters achieve high submicron particles separation capacities and guarantee a controlled air flow (laminar flow).

The frame for different types of EPA, HEPA and ULPA filters may be made from aluminium, multi-layer wood, MDF, stainless sheet metal or zinc-coated sheet metal.

Separators of EPA, HEPA and ULPA filters are made using the so-called MINIPLEAT technology, when separators consist of a thermally processed melt adhesive. In special cases, the technology of inserted aluminium separators is used too.

Seals of EPA, HEPA and ULPA filters is from a special section made from EPDM sponge rubber with closed surface. Form of the seal: flat, semi-circular, double-edged.

EPA, HEPA and ULPA filters are used in a wide range of applications. They are used in industrial processes (microelectronics, pharmaceutical industry, food-processing industry, health care, optics, microbiology, etc.) – operating rooms and hospitals, clean work tables (laminar flow boxes) – ceiling outlets (extensions for clean rooms) and so-called fan filter units – treatment of hazardous substances such as asbestos, heavy metals and carcinogenic dusts – nuclear energy plants and nuclear research, etc. Hepa filters are manufactured in several variants: KS BESTFIL, Ultrafilter N.

63

KS BESTFILAbsolute filters for microparticles – EPA, HEPA, ULPA

Filtration class according to EN 1822:2010E11 – H14

Delivery options (great variability)MDF frame widths: 78, 150, 292 mm Al frame widths: 69, 78, 88, 117, 150, 292 mm


Filter frameThe standard frame (hardened hydrophobic MDF); zinc-coated sheet metal, multilayer wooden board, plastics, aluminium or stainless steel if requested.

SeparatorsSeparators are made using the so-called MINIPLEAT technology, when separators consist of a thermally processed melt adhesive. In special cases, the technology of inserted aluminium separators may be used too.

Sealing of the filter pleat in the frameTwo-component polyurethane sealant.

SealsA special section from EPDM sponge rubber with closed surface. Form and type of the seal: flat, semi-circular, double-edged, gel.

Field of applicationKS Bestfil are used in areas with the highest demands for air cleanliness. They are mainly used in installations in inlet ceilings and walls of clean rooms with a discharge flow with low turbulence as well as in clean desks and work booths.

Typical areas of application: microelectronics, production of semi-conductors, medicine, chemistry, pharmaceutical industry, microbiology, production of films and magnetic tapes, production of compact discs, laboratories and food industry.

ConstructionPapers from fine glass microfibres of various separation or penetration levels are used as filter media. The filter medium is folded into a pleat and the number and height of folds is optimally dimensioned for operating conditions. Separators consist of a melt adhesive, which provides high stability of the entire filter element. The pleat is tightly sealed with polyurethane to a stable frame. To safely seal the filter element to the fastening structure, there is an endless seal on the filter inlet side.

MaterialHydrophobic filter paper

Filter pleat from hydrophobic filtration paper from glass fibres

H V A C

PLUS SERVICE


AN R

OOMS

HIG H EFFICIEN CY


AND


FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

64

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

DimensioningTo satisfy market requirements, filter media are tested at a test stand. Using this device, it is possible to select an optimum medium for every type of filter and case of deployment from the wide range of filter media offered in the market, and at the same time to determine its penetration as a function of the particle size or air flow rate through the medium (diagram 1 and 2). In this way, our Company can measure the achieved threshold values for the specific case of use and adequately dimension the filters.

Diagram 1 shows that every filter medium shows a clear penetration maximum. The particle diameter is identified as MPPS (Most Penetrating Particle Size). The position of the penetration maximum is a function of a particle and fibre diameter, air flow rate through the medium, a thickness of medium and density of folds. Integral and local penetration values of all KS Bestfil filters are dimensioned with regard to MPPS, and therefore they meet the requirements of EN 1822 by their entire range.

Pre-filters to KS Bestfil filtersThe separation of larger particles prolongs the service life of KS Bestfil filters. We recommend two-stage pre-filtration, i.e. pocket filters KS PAK 35 – 55 as stage 1 and fine dust particle filters KS FP V3 or KS PAK 85 and KS PAK 98 as stage 2.

Quality, defectoscopy, SCAN TEST*All filters are tested by an oil thread leak test for faultlessness, Scantest with a test certificate for an extra charge. (* SCAN TEST = computer controlled test of the filter medium with a laser particle counter.)

For filters of classes H13 and H14• Statistic check of filtration-technical data on finished

products and materials.• Visual check of the finished product before packing.

Test scope: 100%.• Test of absence of leakage according to EN 1822-4,

Annex A, so-called oil-thread leak test.• Factory test certificate according to EN 10204-2.2

Scantest progress visualisation

Automatic testing device – SCAN TEST for HEPA and ULPA filters

10-1

10-2

10-3

10-4

10-5

10-6

10-7

0.01 0.050.1

Diagram 1Particle diameter

Pene

trat

ion

0.4

µm0.3

E11

E12

U15U16

U17

H13

H14

10-1

10-2

10-3

10-4

10-5

10-6

10-7

10-8

1.0 2.03.0

Diagram 2Flow rate through the medium

MP

PS-

Pene

trat

ion

5.0

cm/s

E11

E12

U15U16

U17

H13H14

Typical medium penetrations

65

The Scantest provides quality assurance and testing methods for filters as follows: a computer-controlled filter medium test and an automated acceptance test of finished filters at the test stand with a laser particle counter working in parallel (the lower measurement limit of 0.1 µm) proves characteristics of the filter – a separation level, leak-proof property and a pressure drop – at the rated volume air flow. In addition to the integral, the cleanliness class corresponding to the maximum local penetration (= penetration at a place of a defect) is therefore guaranteed, and both characteristics are measured according to EN 1822 for MPPS. All measured filter characteristics are documented in a factory test certificate according to EN 10204-2.2 and individual measurement reports. Quality assurance at this level prevents uncertainty and problems in an equipment assessment by the scantest and it is a significant prerequisite for the success of a project with high demands for cleanliness and safety (e.g. in the pharmaceutical industry and microelectronics).

Waste disposalIncineration in appropriate incinerators.

Advantages of KS Klima-Service• 100% proper production of KS BESTFIL• own automatic folding of medium with parameters

set according to the customer's requirements• automatic sealing of the filter pleat into the frame

using polyurethane sealant• automatic application of the sealant on the intake

and outlet sides of the filter according to the customer's requirements

• own non-destructive testing and efficiency measurement in our own scanning apparatus including a test certificate according to EN 1822:2010

Technical data for the filtration class H13: air flow rate at the initial pressure drop of 250 Pa

Filter size (w × h) depth 78 mm depth 150 mm depth 292 mm

305 × 305 mm 300 m³/h 350 m³/h 400 m³/h

305 × 610 mm 550 m³/h 650 m³/h 830 m³/h

457 × 457 mm 700 m³/h 730 m³/h 900 m³/h

575 × 575 mm 1,100 m³/h 1,200 m³/h 1,500 m³/h

610 × 610 mm 1,250 m³/h 1,350 m³/h 1,700 m³/h

915 × 610 mm 1,800 m³/h 2,000 m³/h 2,500 m³/h

1,220 × 610 mm 2,450 m³/h 2,700 m³/h 3,400 m³/h

Automatic line for manufacturing of minipleats

FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

66

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

Ultrafilters NAbsolute filters for microparticles – EPA, HEPA, ULPA

CSN EN ISO 16890ISO ePM1 55% to ePM1 85%

Filtration class according to EN 779:2012, EN 1822:2010F7 – U15

Delivery options

595 (w) × 595 (h) × 292 (d) mm 610 (w) × 610 (h) × 292 (d) mm 762 (w) × 610 (h) × 292 (d) mmPossibility of regenerationno

Filter propertiesN ultrafilters have a compact and robust design with a low risk of damage and an extra large filtration area. The use of the filter medium in the pleat enables extremely high intake-flow rates and flow rates up to 4,000 m3/h (for a filter of dimensions 610 × 610 × 292 mm).

QualityUltrafilters of filtration class H13 and H14 always undergo the oil-thread leak test.

Field of applicationClean rooms – pharmaceutical industry, health sector, nuclear power plants, microelectronics, industry.

MaterialFilter pleat from submicron glass fibre

Waste disposalFilters contaminated with outside air should be disposed of by incinerating or landfilling. Filters contaminated by toxic or radioactive particles should be disposed of as hazardous waste.

h

Dimensions

dw

x

Type 610width: 609 mm (±1 mm)



xNon-pressed seal, pressed about 5 mm

Depth dDepth of all the filters is 292 mm (±1 mm)

H V A C


AN R

OOMS

HIG H EFFICIEN CY


AND


PLUS SERVICE

67

Ultrafilter N – technical data for the filter size of 610 × 610 × 292 mm, frame type: zinc-plated

Unit of measure N-V45-610-VZ,F7 N-V50-610-VZ,F7 N-V45-610-VZ,F9 N-V50-610-VZ,F9 N-V45-610-VZ,E11

Filtration class ISO16890 / EN1822 ePM1 55% ePM1 55% ePM1 80% ePM1 85 % E11

Initial pressure drop Pa 190 135 200 240 250

Air flow rate m3/h 4,500 5,000 4,500 5,000 4,500

End pressure drop Pa 300 300 300 300 600

Maximum thermal resistance up to °C 70 70 70 70 70

Unit of measure N-V40-610-VZ, E11 N-V34-610-VZ, H13 N-V40-610-VZ, H13 N-V26-610-VZ, H14 N-V30-610-VZ, H14

Filtration class ISO16890 / EN1822 E11 H13 H13 H14 H14


Air flow rate m3/h 4,000 3,400 4,000 2,600 3,000




Unit of measure N-V42-592-VZ, F7 N-V42-592-VZ, F9 N-V42-592-VZ, E11 N-V32-592-VZ, H13 N-V24-592-VZ, H14

Filtration class ISO16890 / EN1822 ePM1 55% ePM1 80% E11 H13 H14


Air flow rate m3/h 4,200 4,200 4,200 3,200 2,400



Ultrafilter N – technical data for the filter size of 610 × 610 × 292 mm, frame type: stainless steel

Unit of measure N-V50-610-RF, F7 N-V50-610-RF, F9 N-V50-610-RF, E11 N-V40-610-RF, H13 N-V30-610-RF, H14

Filtration class ISO16890 / EN1822 ePM1 55% ePM1 85 % E11 H13 H14


Air flow rate m3/h 5,000 5,000 4,000 4,000 3,000




Unit of measure N-V40-595-VZ, F7 N-V40-595-VZ, F9 N-V38-595-VZ, E11 N-V38-595-VZ, H13 N-V30-595-VZ, H14

Filtration class ISO16890 / EN1822 ePM1 55% ePM1 85% E11 H13 H14


Air flow rate m3/h 4,000 4,000 4,000 3,800 2,800



Ultrafilter N – technical data for the filter size of 595 × 595 × 292 mm, frame type: stainless steel

Unit of measure N-V40-595-RF, F7 N-V40-595-RF, F9 N-V38-595-RF, E11 N-V38-595-RF, H13 N-V28-595-RF, H14

Filtration class ISO16890 / EN1822 ePM1 55% ePM1 85 % E11 H13 H14


Air flow rate m3/h 4,000 4,000 3,800 3,800 2,800



Parameters for sizes of 762 × 610 × 292 mm upon request

FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

TIN

DU

STR

IAL

FILT

RAT

ION

SY

STEM

S

68

INDUSTRIAL FILTRATION SYSTEMS

69

Industrial filtration systems

Unit description• In industry and everywhere where the share of dust

particles exceeds 3 mg / m³• Suitable s the first filtration stage to reduce a large

number of dust particles to minimum• Possibility of filtration up to the class H13• Modular system (easy unit extension according

to customer’s requirements)• Easy operation• Maintenance-free operation – fully autonomous

system• Filter medium service life up to 10 years without

necessary replacement according to the selected type of the filter unit

• possibility to filtrate air from 100 m³/h up to 1,000,000 m³/h

• Great variability of the system and possibility to deliver various peripheries to the unit

• Possibility to be connected to the central HVAC system with signalisation to the control room

Types of filtered airAir-borne dust, explosive dusts (individual assessment), adhesive components (pre-coating necessary), corrosive dusts and particles, abrasive dusts

Types of filtration systemsHose, lamella, cartridge, electrostatic, cyclone

Removed dust discharge• To a container under the unit (the most common

case – usually a bayonet fastening) • To a large barrel under the unit• By a conveyor to a container

Additional systems Multicoater• Equipment for dosing pre-coat dust• Fully autonomous system connected to the unit• Used for extremely sticky components as a filter

medium protection against sticking and damage

Fan• Usually included in the unit• High-pressure fans connected to the control unit

Compressor• It can be used in areas where it is impossible

to connect the unit to compressed air

Design variants of the unitsStandardStandard environment

To the explosive environment• Individual assessment• Possibility to equip it with anti-gust membranes

Stainless steel• Individual assessment • For dusts with corrosion characteristics

Individual• Possible combination of the options specified above • Precisely customised

Possibilities for filter medium regenerationMechanical shake-off • Manual (using a lever system)• Automatic (vibration shake-off)

Pneumatic shake-offChain shaking off by compressed air at a pressure of approximately 5 – 6 bar

RinsingReverse rinsing by a fan

FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

T

IND

UST

RIA

L FI

LTR

ATIO

N

SYST

EM

S

70

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

Filtration classStandard BIA M, non-standard according to the customer’s requirements

Various design options

Cartridges Filter hoses Filter bag Filter panel Filter lamellasWe also offer non-standard designs according to the customer’s requirements

Industrial filter cartridges are used as filter inserts in industrial fume hoods, i.e. in areas with a high proportion of dust in the extracted air.Fields of applicationWherever the proportion of dust particles exceeds 3 mg/m³.

Various material options• Cellulose• Cellulose / polyester• 100% polyester• PTFE membrane• Antistatic design• Atypical design according

to client’s conditions

References• Various designs of filter cartridges and panels

for a variety of filtration equipment• Filtration after powder coating• Filtration of the production of non-woven fabrics• Filtration of coring furnaces • Laser and plasma cutting• Wood-processing industry• Metal working• Filtration of sticky dusts• Aerosol separation

Filter cartridgesfor industrial filtration


HIG H EFFICIEN CY

71

Comprehensive solutionWe offer comprehensive systems from designing the project to implementation and subsequent maintenance.

Fields of applicationThese solutions can be used to filter atmospheric dust, gaseous pollutants or a combination thereof such as paint shops or assembly lines in the automotive industry.

Extracted painting wallsThe concept is the classic extracted painting wall complemented by multi-stage filtration and an air supply unit. The painting wall is modular and is available in working lengths from 1,000 mm and a working height of 1,000 or 2,000 mm.

Extracted painting desksWe also offer painting desks for smaller plants. These units do not include an air supply unit. The advantage of these units, however, is the possibility of ordering without installation. You can install them yourself and save costs.

Methods of filtrationAll unit types are equipped with 2-stage filtration with the possibility of installing carbon filters for gaseous pollutants. The first filtration stage is used to collect most of the excess paint. This filter is replaced most often. It is a folded paper filter. The second filtration stage collects the remaining particles that pass through the paper filter. The third stage consists of a fine dust filter and the fourth stage consists of carbon cartridges. Carbon filtration is used to separate odours and harmful substances from paints with organic solvents. Water-based paints do not require carbon filtration.

Concept of extracted painting walls and painting deskfor industrial filtration

CSN EN ISO 16890ISO COARSE 50%, ePM1 55%

Filtration class according to EN 779G3, F7 (for carbon filters)

Delivery options of painting walls (modular system)from 1,000 mm (w), 1,000 or 2,000 mm (h)

Delivery options of painting desks (modular system)from 1,200 mm (w) × 2,000 (h) × 1,200 (d) mm


FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CES

SOR

Y EQ

UIP

MEN

T

IND

UST

RIA

L FI

LTR

ATIO

N

SYST

EM

S

72

COMPONENTS FOR CLEAN ROOMSComponents for clean rooms are filters and filtration equipment for areas with the highest demands on cleanliness. In this group, we offer CG inlet pressure ceilings with laminar flow, including designing, delivery and installation of the device.

KS Extensions for Clean Rooms are an integral part of an air intake system. They are equipped with HEPA filters as standard and are used for air filtration and air distribution. Separation of microparticles, bacteria and viruses takes place immediately before entry into the clean room. The KS Extensions for Clean Rooms are delivered in a standard size line or in a size required by the customer.

The equipment is suitable for the health sector – inlet ceilings, Extensions for Clean Rooms, pharmaceutical industry, fine electrical engineering production, microbiology, manufacturing of CDs, food-processing industry, etc.

We offer validation of clean rooms and a validation certificate that includes:• air flow rate through HEPA• HEPA faultlessness in central inlet • faultlessness of HEPA final-filters • cleanliness of supply air • cleanliness of the area and control points

without operation • overpressure in a specified area, output and margin

73

CG inlet pressure ceilings with laminar flowComponents for clean rooms

• comfortable climate in the room, no draught• very low noise level• design with smooth surfaces resists

to disinfection agents• minimised concentration of germs

(< 10 germs / m³) in the sterile area• lower energy consumption due to minimised

pressure dropes• perfect and tight integration of system items

Delivery options• designing and dimensioning according

to the customer's requirements

FeaturesThe inlet pressure ceilings with laminar flow meet the highest health and technical demands, including the filtration (H14–U16) and distribution demands for the air inlet into clean rooms. They can be supplied with basic ceiling lighting. If requested, it is possible to supply with air-tight shutting flaps enabling closing of the air supply if needed. A compact design with high adaptability to the existing building.

End outlets used:A double laminar flow diffuser from a special fine micro-fabric creates the laminar discharge flow under the whole ceiling.

Field of applicationClean rooms – operating rooms, pharmacy, microelectronics, fine optics.

CG inlet ceiling – operating room in department of gynaecology

CG inlet ceiling

The CG inlet ceiling minimises concentration of germs in the sterile zone

CG inlet ceiling

H V A C



AND

HIG H EFFICIEN CY


AN R

OOMS

PLUS SERVICE

FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

EN

TS

FOR

CLE

AN

RO

OM

SFI

LTER

UN

ITS

FOR

HVA

C

MO

UN

TIN

G F

RA

MES

AD

SOR

PTI

ON

FIL

TER

S W

ITH

AC

TIVA

TED

CAR

BO

NA

CC

ESSO

RY

EQU

IPM

ENT

IND

UST

RIA

L FI

LTR

ATIO

N

SYST

EMS

74

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS Extensions for Clean RoomsComponents for clean rooms

Delivery options

6 standard sizes, possibility to adapt to the customer's requirementsAbsolute filters used

KS BESTFIL as standard

FeaturesKS clean extensions for clean rooms are air diffusers with integrated absolute filters for microparticles. The outlets are used for air filtration and distribution. Separation of microparticles, bacteria and viruses takes place immediately before entry into the clean room. The extensions are supplied as ceiling and wall-mounted.

The KS extensions for clean rooms include a test groove enabling measurement of tightness of mounting of the filter and a connection for pressure measurement. The air is supplied through round connecting mouths into which it is possible to mount air-tight shutting flaps.

• Design of extensions for clean rooms enables air filtration and distribution of the filtered air

• Viruses, bacteria and dust particles are filtered from the air stream immediately before the outlet of air which eliminates risks connected with a central filtration system, such as cross contamination in ventilation pipelines

End outlets used:Perforated sheet metal, diffuser, whirl outlet.

The KS extensions for clean rooms are ideal for use everywhere where clean air or air free of germs is needed, e.g.:

• Hospitals: operating rooms and infirmaries, intensive care units, sterile zones and isolation wards

• Industry: ecologically clean production plants in the pharmaceutical, chemical, food-processing, optical and electronics industry

• Laboratories: clean rooms and work areas, clean air supply and filtration of toxic or harmful aerosols

Quality, defectoscopy, SCAN TEST*All filters are tested by an oil thread leak test for faultlessness, Scantest with a test certificate for an extra charge. (* SCAN TEST = computer controlled test of the filter medium with a laser particle counter.)

Field of applicationClean rooms – pharmacy, health sector, laboratories, electrical engineering, microbiology, nuclear engineering.

KS Extensions for Clean Rooms – table of sizes

Size no. Dimensions Intended for KS BESTFIL insert with dimensions:

1 318 × 318 mm KS BESTFIL 305 × 305 mm

2 470 × 470 mm KS BESTFIL 457 × 457 mm

3 570 × 570 mm KS BESTFIL 557 × 557 mm

4 623 × 623 mm KS BESTFIL 610 × 610 mm

5 623 × 928 mm KS BESTFIL 610 × 915 mm

6 623 × 1,233 mm KS BESTFIL 610 × 1,220 mm

H V A C

PLUS SERVICE


AN R

OOMS

HIG H EFFICIEN CY


AND


75

FILTER UNITS FOR HVAC PIPELINESThe design of the special filtration equipment for use in HVAC pipelines is adapted for an easy integration into the pipeline system. Its structure is solid and stable and manipulation is very easy. One KS BK may integrate even a multi-stage filtration from filtration class ISO COARSE – H13. The KS BK filtration equipment comes in dimensions range for air flow rates from 800 m3/h to 40,800 m3/h. The KS BK filtration equipment can be combined with other equipment to achieve higher air flows. We offer complex services, from designing of the equipment to its installation.

The KS BK filter units are used when it is necessary to use pocket and compact filters, filter elements and compact filters with activated carbon at the same time. They may be used for air supply into telecommunication central offices, hospitals, pharmaceutical and electrical engineering plants, etc.

In case of high cleanliness demands, we supply chambers in hygienic quality in filtration classes up to H13.

The NG channel filter units are stable units suitable in particular for areas with the need of supply of up to 12,000 m3/h of absolutely filtered air. Due to the possibility to assemble the units quickly and easily into variable sizes, they offer the possibility to use many types of KS filters.

A two-phase combination of filters consists of a KS FP filter for dust particles and a KS AFP adsorption filter for suppression of gases. They are mounted together into KS RS type mounting frames designed for this purpose. Both filter elements are placed one to another by flange sides and they are attached together into the KS RS mounting frame.

76

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS BK filter unitsFilter units for air handling pipelines

Unit descriptionThe BK filter units are an ideal solution for filtration of coarse or fine dust in all pipelines of HVAC units. The KS BK filter chambers are made of frame aluminium profiles (framework), their jacketing is made of zinc-coated steel sheet metal. Also available in an outdoor design.

Possibility of filter installationIdeal for pocket filters KS PAK, compact filters KS FP, metal filter elements, activated carbon elements KS AFP, etc.

Field of applicationAir supply into telecommunication central offices, hospitals, pharmaceutical and electrical engineering plants, etc. In case of high cleanliness demands, we supply chambers in hygienic quality in filtration classes up to H13.

Manufactured range

KS BK 1 – BK 51Flow rate

850 – 40,800 m3/hStructural depth of chambers

500 – approx. 2,000 mm

Advantages• easy integration into a pipeline system• solid and stable design• modern method of mounting of pocket and compact

filters in mounting frames• easy handling during installation• supplied with a pressure gauge for pressure drop

measurement• possibility to install compact filters, deliveries

of chambers with multi-stage filtration• design of chambers according to the customer's

requirements, precisely according to specifications

Drawing description 1 mounting frame KS RA 2 pocket filter 3 clips

for tight closing of the door

4 removable door 5 base 6 strip flanges

(w = 30 mm)

A width (outer chamber dimension)

A1 width (connecting dimension of strip flanges)

B1 height (connecting dimension of strip flanges)

B2 base height (70, 100 mm)

SP flow direction

H V A C

PLUS SERVICE


AN R

OOMS

HIG H EFFICIEN CY


AND



I N D U S T R Y

77

Special filter units with multi-stage filtrationSpecial applications

Special filter units with multi-stage filtration, including a fan and other HVAC componentsDesign

• mobile design • hygienic design • stainless, Komaxit design • design for explosive environments

Unit descriptionThe unit has a frame structure from aluminium profiles. Jacketing may be simple or double with insulation. The standard material is zinc-coated sheet metal, if required stainless steel or Komaxit treatment. Chambers can be equipped with multi-stage filtration – ISO COARSE 50%, ISO ePM 1 55% and activated carbon or ISO COARSE 50%, ISO ePM 1 55% and HEPA filters. The fan with continuous control of speed is supplied on request. The units are supplied also in a mobile design or treated for outside use.

Field of application • suction of dust particles and harmful substances

in electrical engineering• suction and cleaning of waste air from waste water

treatment plants• mobile suction in nuclear power plants• suction from laboratory, hospital and microbiological

workstations• pharmaceutical plants, airport terminals• suction of harmful substances from workstations

in plastics processing


HIG H EFFICIEN CY


G



AND

I N D U S T R Y

FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER

UN

ITS

FOR

HVA

C

MO

UN

TIN

G F

RA

MES

AD

SOR

PTI

ON

FIL

TER

S W

ITH

AC

TIVA

TED

CAR

BO

NA

CC

ESSO

RY

EQU

IPM

ENT

IND

UST

RIA

L FI

LTR

ATIO

N

SYST

EMS

78

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS NICE AIRSpecial applications

FeaturesA brand new system of efficient filtration for separation of fine dust particles and harmful gases and odours. The unit is made from aluminium profiles, panel jacketing is from zinc-coated sheet metal. Inspection door is equipped with handles for easy handling during filter replacement. A heart of the unit is a compact filter KS WA that is mounted in a mounting frame with a microporous seal.

Design• without fan• with fan and speed controller

Advantages• high adsorption capacity > 95 %• low pressure dropes – energy costs savings, possibility

of retrofitting• filtration of fine dust particles and elimination

of odours in one phase• flow rate 100 m3/h to 1,000 m3/h• possibility to connection to the existing

HVAC system• unit's filter designed in an all-plastic frame• the compact unit belongs among low-energy filters

Field of application Separation of fine dust particles, organic and aromatic hydrocarbons (e.g. xylene, toluene, benzine, acetates), exhaust gases, body, civilisational, cosmetic and cigarette odours and many other gaseous contaminants.

Fields of applicationFamily houses, electrical engineering, airports, hotels, restaurants, administrative buildings, etc.



Design

• without fan • with fan and speed controllerDelivery options

dimensions according to customer's requirements

KS NICE AIR variants

Without fan • dimensions: 365 × 365 × 500 mm

• with mounting frame for KS WA filter: 287 × 287 × 150 mm

• counterflanges; connecting dimensions: 305 × 305 mm

With fan • dimensions: 405 × 710 × 800 mm

• dimensions with mounting frame for KS WA filter: 287 × 592 × 150 mm

• continuous speed control, air flow rate 0 to 600 m3/h.

Possibility to deliver with or without the base. Connecting dimensions: circular flange of diameter of 200 mm.

HIG H EFFICIEN CY


AND


H V A C


79

Field of applicationSuction of contaminated air (filtration of particles, micro-organisms, molecules). Suitable for: pharmaceutical, biotechnological, chemical, hospital, laboratory operations, devices requiring biological safety, breeding facilities, nuclear power stations...

ConnectionBy means of pre-drilled rectangular flanges

Pressure portsPlaced in and against the flow direction

Dimensions range of safety boxes and filters

ModelSafety box dimensions Filter size

C B A w h d

KS BZV 111 755 794 570 610 610 292

KS BZV 112 755 794 428 610 610 150

KS BZV 113 755 794 376 610 610 98

KS BZV 114 755 794 326 610 610 48

KS BZV 121 755 489 570 610 305 292

KS BZV 122 755 489 428 610 305 150

KS BZV 123 755 489 376 610 305 98

KS BZV 124 755 489 326 610 305 48

KS BZV 211 505 794 570 305 610 292

KS BZV 212 505 794 428 305 610 150

KS BZV 213 505 794 376 305 610 98

KS BZV 214 505 794 326 305 610 48

KS BZV 221 505 489 570 305 305 292

KS BZV 222 505 489 428 305 305 150

KS BZV 223 505 489 376 305 305 98

KS BZV 224 505 489 326 305 305 48

KS BZV safety boxwith contactless filter replacement

Unit descriptionSafety box of modular construction for variable assemblies, fully welded. Steel construction, air-tight welded or made of stainless steel (including four knobs for fixing the door to the box). The filter frame is continuously welded and absolutely tight HVAC transitions – painted or stainless steel.

Filter frame versionsMDF, AL, galvanized, stainless steel

Special designAll boxes are provided with four safety locks for allowing proper mounting of the frame and the door: the door cannot be closed unless the filter is placed correctly and snapped in the frame. If the door is closed correctly (the frame fits correctly) and the device is on, the filter and the frame door are tight. Then the chamber is not influenced by vibrations or shocks.

Filter installation

Contactless, safe filter attachment using stainless steel lever mechanismSurface finish

epoxy powder coated RAL 9010 or stainless steel AISI 3044For filters with the following depths

292 mm, 150 mm, 96 mm

A

B C

h + 18 w + 18

w +

18

C

h + 18

FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER

UN

ITS

FOR

HVA

C

MO

UN

TIN

G F

RA

MES

AD

SOR

PTI

ON

FIL

TER

S W

ITH

AC

TIVA

TED

CAR

BO

NA

CC

ESSO

RY

EQU

IPM

ENT

IND

UST

RIA

L FI

LTR

ATIO

N

SYST

EMS

80

MOUNTING FRAMESMounting frames are designed for perfect mounting of pocket filters KS PAK, compact filter elements KS FP and other types of frame filters KS PL, KS Z, KS MA. Their construction is robust and very stable. Mounting of the filter into the frame is very simple. Filters are fixed by means of fastening elements which provide tight seating of the filter in the frame.

Due to a simple modular structure, it is possible to make filter walls according to the customer's requirements. Assembly of frames into air-conditioning units or suction openings is very simple. Supplies of non-standard frame sizes – according to requirements also in stainless design.

Special frames KS RS 120 are used for mounting a pair of filters, e.g. combination of pre-filters and final-filters or filters with activated carbon KS FP, KS PAK, KA AFP, KS W, KS Z, KS PL. An excellent solution for manufacturers of air-conditioning units. New mounting of a pair of filters, small structural depth, easy mounting into air-conditioning units and suitable for combination into large filter walls.

81

Mounting frames KS RAFiltration accessory equipment – mounting frames

Design

zinc-coated sheet metal, stainless steel if requiredDelivery options

610 (w) × 610 (h) × 70 (d) mm 508 (w) × 610 (h) × 70 (d) mm 305 (w) × 610 (h) × 70 (d) mm 305 (w) × 305 (h) × 70 (d) mm

FeaturesAn advantage of the KS RA frame is the variable mounting and subsequent dismounting of filters from both sides, i.e. in or against the direction of air flow. They are equipped with 4 clamps that press the filter element to an integrated microporous seal.

Use with filter typesThe frames are used for mounting a pair of filters, e.g. combination of pre-filters and final-filters or filters with activated carbon KS FP, KS PAK, KS AFP, KS W, KS Z, KS PL. An excellent solution for manufacturers of air-conditioning units.

Advantages• new mounting of a pair of filters• small structural depth• easy mounting into air-conditioning units• suitable for combination into large filter walls• for filter depths of 25 and 48 mm


H V A C


FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

MO

UN

TIN

G F

RA

ME

S

AD

SOR

PTI

ON

FIL

TER

S W

ITH

AC

TIVA

TED

CAR

BO

NA

CC

ESSO

RY

EQU

IPM

ENT

IND

UST

RIA

L FI

LTR

ATIO

N

SYST

EMS

82

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

Mounting frames KS RS 120Filtration accessory equipment – mounting frames

Design

zinc-plated sheetDelivery options

610 (w) × 610 (h) × 120 (d) mm 508 (w) × 610 (h) × 120 (d) mm 305 (w) × 610 (h) × 120 (d) mm 305 (w) × 305 (h) × 120 (d) mm

FeaturesThe KS-RS mounting frames are made from stainless or zinc-coated sheet metal. They are equipped with 4 clamps that press the filter element to an integrated microporous seal.

The filters are mounted easily and safely by their inserting and pressing the clamps to the microporous seal. Side assembly openings facilitate assembly of frames into filter walls.

Use with filter typesThe frames are used for mounting a pair of filters, e.g. combination of pre-filters and final-filters or filters with activated carbon KS FP, KS PAK, KS AFP, KS W, KS Z, KS PL. An excellent solution for manufacturers of air-conditioning units. Combination of filters, e.g. FP+AFP, W+PAK, FP+FP, FP+PAK.

Advantages• new mounting of a pair of filters• small structural depth• easy mounting into air-conditioning units• suitable for combination into large filter walls• for filter depths of 25, 48, 96 mm


H V A C


83

Mounting frames KS NFGFiltration accessory equipment – mounting frames

Design


625 (w) × 625 (h) × 335 (d) mm for the filter 610 × 610 × 292 mm






FeaturesThe mounting frames KS NFG are used for mounting highly efficient ultra filters KS N, KS BESTFIL or frame filters with a solid frame at the depth of 292 mm. The filter is installed by means of 4-point fastening.

The frame has a place to check the tightness of the filter installation. The frames are available in the zinc-plated or stainless steel design.


H V A C


FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

MO

UN

TIN

G F

RA

ME

S

AD

SOR

PTI

ON

FIL

TER

S W

ITH

AC

TIVA

TED

CAR

BO

NA

CC

ESSO

RY

EQU

IPM

ENT

IND

UST

RIA

L FI

LTR

ATIO

N

SYST

EMS

84

Mounting frames KS RAPFiltration accessory equipment – mounting frames

Design


305 (w) × 305 (h) × 70 (d) mm for 4 pc of cartridges

305 (w) × 610 (h) × 70 (d) mmfor 8 pc of cartridges

508 (w) × 610 (h) × 70 (d) mmfor 12 pc of cartridges

610 (w) × 610 (h) × 70 (d) mm for 16 pc of cartridges

Non-standard�dimensions�upon�request

FeaturesThe mounting frame KS RAP is used for mounting filter cartridges KS KOPA 450 and 625. Filter cartridges are mounted using a 3-point bayonet closure and a tightening wrench.

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9


H V A C


85

ADSORPTION FILTERS WITH ACTIVATED CARBONActivated carbon is used to adsorb odours and harmful gaseous impurities from air whose toxicity and smell are now a big burden for the environment and may be harmful for the humans, animals and plants. Activated carbon is used in air-conditioning, ventilating and special filtration equipment to clean the inlet, circulating and waste air.

In most cases, activated carbon is added to filter cartridges that are manufactured in both standard and atypical designs. Filter cartridges are made from zinc-coated sheet metal, stainless steel or anodised.

Our range of filter units KS BD and KS BD BIG offers variable sizes depending on a concrete technical solution. A special equipment for hydrogen sulfide elimination is a unique solution for water treatment plants. All the filtration devices with activated carbon are turnkey solutions delivered from design to assembly of the equipment.

Compact filters with various types of adsorption media containing non-impregnated or impregnated activated carbon are also used for elimination of odours and harmful gases. They are used in case of low concentrations (e.g. laboratories, specialised chemical establishments, etc.)

86

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

Examples of the adsorption, separation of harmful substancesOrganic substances, styrene, acetates, benzine, petroleum vapours, ammoniac, acidic and other gases, meat production odours, hospital odours, exhaust gases, formaldehyde and ammoniac odours.

Activated carbon usedNon-impregnated granulated high quality activated carbon, impregnated activated carbon if required.

RegenerationUsed activated carbon is poured out and thermally reactivated (regaining of efficiency). Saturated impregnated activated carbon cannot be reactivated.

KS KOPA and KS KOPA-BIGAdsorption filters with activated carbon

Dimensions ranges

KS KOPA 450 KS KOPA 625 KS KOPA BIG filter cartridgesPossibility of regenerationYes

Filter propertiesThe KS KOPA filter system consists of a mounting frame and filter cartridges filled with activated carbon. The filter cartridge consists of two cylinders of different diameters made from a special perforated sheet metal. The intermediate space formed by the difference of diameters determines the width of the activated carbon layer. Activated carbon is optimally filled into this intermediate space on a shaking machine. The closed cartridge has a gasket that ensures a gas-tight mounting in the base frame. The cartridges are fixed to the base frame by three special clamping bolts through a bayonet closure and forms a stable filter unit. KS RAP frames are used to mount KS KOPA 450 and KS KOPA 625. The KS KOPA-BIG type cartridges are used for high flow rates.

Field of applicationExhaust equipment in paint shops, removal of odours from kitchens and barbecue grills, adsorption of kerosene in airport terminal buildings, welding operations exhaust equipment, adsorption of harmful substances from soldering, industrial harmful substances from the chemical and electrical engineering industry, smog gases, nuclear power plants.

Technical data Unit of measure KS KOPA 450 KS KOPA 625 KS KOPA BIG

Flow rate m3/h up to 190 up to 190 1,800

Pressure drop Pa up to 130 up to 140 250

Cartridge diameter (outer) mm 145 145 367

Cartridge length mm 450 605 1,003

Activated carbon filling kg 2.15 2.8 25

Adsorption capacity for C2H2 % max. 25 max. 25 max. 25

H V A C


HIG H EFFICIEN CY


AND


87

KS BDCompact filter units with activated carbon

Dimensions ranges

KS BD 4 – 192 (700 – 36,000 m3/h)Possibility of regeneration

Non-impregnated activated carbon: YES, thermal re-activation Pocket pre-filters ISO ePM1 55%: no

Filter propertiesThey represent an operational solution for separating of gaseous harmful substances from the inlet or waste air. The units are made from aluminium frame profiles, the jacketing is made from zinc-coated sheet metal. As standard, they are equipped with two-stage filtration: 1st st. = pocket filters ISO ePM1 55% for fine dust particle filtration, 2nd st. = KS KOPA filter cartridges The KS KOPA, KS BD filtration system is recommended and approved by the Czech Environmental Inspectorate in Prague.

Field of applicationExhaust equipment in paint shops, removal of odours from kitchens and barbecue grills, adsorption of kerosene in airport terminal buildings, welding operations exhaust equipment, adsorption of harmful substances from soldering.

Examples of the adsorption, separation of harmful substancesMeat production odours, formaldehyde odour, organic substances, styrene, vapours of thinners and solvents, harmful substances from welding.

Activated carbon usedNon-impregnated granulated high quality activated carbon, impregnated activated carbon if required.

RegenerationPocket pre-filters ISO ePM1 55% – no, activated carbon in filter cartridges – yes (thermal reactivation), impregnated activated carbon cannot be reactivated – replacement with new activated carbon.

Main areas of use of the KS BD filter units• Exhaust systems from paint shops and spraying

boxes, adsorption of odours from kitchens, meat production and barbecue grills, adsorption of harmful substances from chemical and electronics industry.

• Air inlets to airport terminals and railway station halls, exhaust systems from nuclear power plants.

• Air inlets and exhausts from operating rooms, intensive care units, control rooms, exhaust systems from water treatment plants, welding exhausts.

• Electronics production and other areas with presence of harmful gases or odours that need to be adsorbed – conference rooms, museums.

• Hospitals, laboratories, computer rooms, printing houses, petrol stations, car parks, garages.

2nd filtration stage – KS KOPA filter cartridges

1st filtration stage – KS PAK 85-F7 pocket filters

Connecting strip flanges (30 mm)

ApA

B Bp

C

10

0 (7

0)

H V A C

PLUS SERVICE

HIG H EFFICIEN CY


AND


I N D U S T R Y

FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ES

AD

SOR

PTI

ON

FIL

TER

S W

ITH

AC

TIVA

TED

C

AR

BO

NA

CC

ESSO

RY

EQU

IPM

ENT

IND

UST

RIA

L FI

LTR

ATIO

N

SYST

EMS

88

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS BD BIGCompact filter units with activated carbon

Filter propertiesThe KS BD BIG compact units can be connected immediately to an HVAC pipeline. Due to their stable structure, it is recommended to install the KS BD BIG units on a concrete base.

Examples of the adsorption, separation of harmful substancesMeat production odours, formaldehyde odour, organic substances, styrene, vapours of thinners and solvents, harmful substances from welding.

Activated carbon usedSaturated impregnated activated carbon cannot be reactivated. It must be replace by new impregnated activate carbon.

Main areas of use of the KS BD BIG filter units:• Exhaust systems from paint shops and spraying

boxes, adsorption of odours from kitchens, meat production and barbecue grills, adsorption of harmful substances from chemical and electronics industry.

• Air inlets to airport terminals and railway station halls, exhaust systems from nuclear power plants.

• Air inlets and exhausts from operating rooms, intensive care units, control rooms, exhaust systems from water treatment plants, welding exhausts, electronics production and other areas with presence of harmful gases or odours that need to be adsorbed – conference rooms, museums.

• Hospitals, laboratories, computer rooms, printing houses, petrol stations, car parks, garages.

Dimensions ranges

KS BD BIG 4 KS BD BIG 6 KS BD BIG 8 KS BD BIG 12 KS BD BIG 16Possibility of regeneration

Non-impregnated activated carbon: YES, thermal reactivation

A new range of filter units for high concentrations of harmful substances and high flow rates from 7,000 m3/h up to do 50,000 m3/h.

Main advantages of the new range of units are:• Perfect pre-filtration of fine particles with help

of compact filters KS FP, ISO ePM1 55%.• Dimensions range from 7,000 m3/h – possibility

of unlimited assembly of any system for the required air flow rate.

• Robust design, high filtration efficiency.• Long servicing interval for the KS FP ISO ePM1 55%

pre-filter and activated carbon in the KS KOPA BIG filter cartridges.

• Possibility to use impregnated activated carbon for special types of harmful substances (smog gases, ammonia, landfill gases, gases from water treatment plants, etc.).

• We provide complete servicing during filters replacement and reactivation of used activated carbon.

H V A C

PLUS SERVICE

HIG H EFFICIEN CY


AND


I N D U S T R Y

89

SULOFF desulphurisation unitSpecial applications

SULOFF desulphurisation unit

Removal of hydrogen sulfide (H2S) from biogas; technology developed in cooperation with the Institute of Chemical Technology in Prague

Unit descriptionCleaning takes place in an adsorption apparatus with a fixed bed through which biogas is flowing. The cylindrical stand of the adsorption apparatus is made of corrosion-proof steel with an opening in the upper part for filling with sorbent. for the purpose of gas inlet, the adsorption apparatus is equipped with the inlet pipeline with a standardised connecting flange. The adsorption apparatus is installed on a concrete bed with its supporting feet anchored to it. On its outer side, the adsorption apparatus is insulated with mineral and glass wool with a thickness of 100 mm – in the aluminium jacket covering the whole adsorption apparatus.

SorbentThe adsorption is performed using impregnated activated carbon in the form of small-sized granules. The weight of the filling depends on the type of the adsorption apparatus.

Field of applicationThe line of desulphurisation units serves for the removal of hydrogen sulfide by means of adsorption using a special adsorption material – activated carbon with the subsequent catalytic oxidation to elemental sulphur that will be trapped by sorbent. The adsorption material deactivates in consequence of the release of elemental sulphur. Therefore, it is necessary to replace it after a certain period of time. The desulphurisation efficiency amounts to 96 – 99 %.

ServiceThe servicing provided by KS Klima-Service a.s. ensures the contactless change of the adsorption apparatus.

ReferencesČOV Znojmo, ČOV Prostějov, ČOV Kroměříž, ČOV Kralupy nad Vltavou, ZS Dublovice, NWT a.s., ZD Novosedly, GASCONTROL, TOTAL ČR spol. s r.o.

Drawing description 1 AC container 2 gas inlet 3 gas outlet 4 condensate discharge 5 filling opening for AC

replacement

6 electric heating of condensate discharge

7 safety valve 8 pressure gauge 9 thermometer 10 gas blow off 11 platform

with staircase


HIG H EFFICIEN CY


AND


FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ES

AD

SOR

PTI

ON

FIL

TER

S W

ITH

AC

TIVA

TED

C

AR

BO

NA

CC

ESSO

RY

EQU

IPM

ENT

IND

UST

RIA

L FI

LTR

ATIO

N

SYST

EMS

90

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

Examples of the adsorption, separation of harmful substancesExhaust gases, thinner and solvent vapours, body odours, cosmetic odours, hospital odours, kitchen odours, food odours, etc.

Filter medium usedA special filter medium made of synthetic fibres with very small particles of adsorbent.

Waste disposal

Filters contaminated with the outdoor air should be disposed of by incineration or landfilling. Filters contaminated with toxic or radioactive gases should be disposed of as hazardous waste.

AFP – adsorption filters with activated carbonAdsorption filters with activated carbon

Delivery options

592 (w) × 592 (h) × 300 (d) mm 592 (w) × 287 (h) × 300 (d) mm 592 (w) × 490 (h) × 300 (d) mm

Filter propertiesThe KS-AFP compact filters provide an excellent solution for removing molecular pollution and improvement of the quality of the inlet and circulating air in the air conditioned buildings. The filter frame is made of ABS, the filter medium is sealed in the frame with polyurethane.

Field of applicationMicroelectrotechnical industry, airports, hotels, restaurants, administrative buildings, museums, hospitals, laboratories, pharmaceutical industry, smog gases.

25 mm 592 mm (w)

300 mm (d)

h

Type 305height: 287 mm




H V A C


HIG H EFFICIEN CY


AND

91

KS WA – panel filterPanel filter for elimination of gaseous harmful substances and odours

Dimensions ranges

according to the customer's requirements (h × w maximally up to 610 mm), a depth of 48, 96, 150 mmPossibility of regeneration

No

Filter propertiesThe KS WA panel filter is an efficient solution for separation of gaseous harmful substances and odours. Its use enables to achieve a substantial improvement of air quality. The KS WA panel filter is a new generation of filters, so-called dual-phase, for adsorption of fine dust and the entire spectrum of gaseous harmful substances and harmful organic substances.

Filter descriptionThe KS WA filter is made from a special filter medium that consists of multiple layers and contains up to 400 g/m2 of activated carbon. The medium is pleated in order to get a maximum filter area and consequently mounted and sealed into a robust plastic frame. It is a brand new filter suitable and efficient for adsorption of organic hydrocarbons (VOCs), asphalt vapours, tar vapours, kerosene vapours, benzine vapours, vapours from solvents, e.g. from paints and varnishes, vapours from glues, rubber and cleaning agents, air pollutants (so-called anthropogenic agents), smog, ozone, body, civilisation, cosmetic and cigarette odours, hospital, alcohol and antiseptic odours, odours from kitchens and foodstuffs, putrid odours and many other gaseous harmful substances. This filter has a very low initial pressure drop. The pressure drop is 10 Pa at flow rate of 100 m3/h and 30 Pa at flow rate of 500 m3/h. That is why the filter belongs among low-energy filters.

Fields of applicationAs a main and efficient filter in KS NICE AIR units. It is also used mainly in HVAC systems, airport terminals, hotels, restaurants, administrative buildings, museums, libraries, hospitals, households, etc. An efficient solution for filtration of harmful aerosols during smog threats.

Waste disposalThe filter is fully combustible.

Advantages of KS WA• high adsorption efficiency > 95 %• low pressure dropes – energy costs savings, possibility

of retrofitting into HVAC equipment• filtration of fine dust particles ISO ePM10 55%

and separation of harmful substances and odours in one phase

• no flue dust• no back desorption• solid plastic frame (ABS)• for installation into standard frames and skids like

pocket filters• low weight – easy handling

H V A C

PLUS SERVICE

HIG H EFFICIEN CY


AND


I N D U S T R Y

FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ES

AD

SOR

PTI

ON

FIL

TER

S W

ITH

AC

TIVA

TED

C

AR

BO

NA

CC

ESSO

RY

EQU

IPM

ENT

IND

UST

RIA

L FI

LTR

ATIO

N

SYST

EMS

92

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

PL-CARB – adsorption filters with activated carbonAdsorption filters with activated carbon

Delivery options

529 (w) × 592 (h) × 25 (d) mm 287 (w) × 592 (h) × 25 (d) mm and other non-standard dimensions according to the customer's requirementsPossibility of regeneration

partial regeneration

Filter propertiesA special adsorption filter medium CARBOTEX – a non-woven polyester fabric with content of activated carbon – is mounted into a metal frame. A single-side covering grid from expanded metal.

Field of applicationFor adsorption of odours from kitchens and barbecue grills. Suitable for adsorption of some organic hydrocarbons.



HIG H EFFICIEN CY


AND


H V A C

93

Filter propertiesActivated carbon in form of cylindrical granules of diameter 3 – 4 mm and length 4 – 8 mm. High resistance to abrasion, ideal for adsorption of organic hydrocarbons and odours.

Field of applicationAdsorption of odours, harmful gases.

Field of applicationFor use in the KS KOPA, KS BD, KS KOPA BIG, KS BD BIG systems and in filter cartridges.

Group no. 1very good adsorption 20 – 50 % of AC weightToluene, xylene, benzine, phenols, benzene, chloroform, perchloroethylene, styrene, acetates, kerosene, turpentine, odours from kitchens, smokehouses and meat production, harmful substances from welding, odours from waste water treatment plants, body odours, harmful substances from gluing and soldering, solvents, tobacco smoke, hospital odours, disinfectants, benzole

Group no. 2good adsorption 10 – 18 % of AC weightEther, anaesthetics, acetone, methyl alcohol, phosgene, acetates, smog gases.

Group no. 3very low adsorption capacity 3 – 8 % of AC weightAcrolein, ethane, propane, ethylene, chlorine, methane, ammonia, formaldehyde, carbon dioxide.

Note: It is necessary to use impregnated activated carbon.

Re-activation of activated carbonWe perform re-activation of activated carbon – saturated activated carbon of the SC 40 standard is reworked in a rotary counter-current furnace under gradual temperature increase from 20 to 830°C and the holding time of approximately 30 minutes,

which are conditions similar to the ones during activated carbon production. An activation medium is water vapour and flue gases. During this technological operation the adsorbed more volatile substances are gradually dried – thermally desorbed, and the surface is activated (renewed) at 92–100%, in rare cases even over 100% (additional reaction of amorphous carbon fraction) from the original value. The operating temperature is sufficient to ensure pyrolysis of non-volatile organic substances. The equipment can re-activate activated carbon saturated e.g. with polymerizing substances, siloxanes, chlorinated hydrocarbons etc.

This re-activation procedure shows significant quality advantages compared to the other technologies (e.g. thermal desorption at 250–350°C) when the active surface is not renewed at lower temperatures.

After the treatment operation, re-activated carbon of the SC 40 quality standard is formed. A secondary product which is a vapour-gaseous phase containing desorbed substances and flue gases is disposed in the environmentally-friendly way by mechanical filtration, incineration and alkali and acid wash-out. These changes can be determined as a general weight reduction of activated carbon by approximately 25% compared to the saturated activated carbon. These changes can be determined as a weight reduction of activated carbon from approximately 0.6 t/m3 to 0.5 t/m3 and the renewal of the active surface – the determination of the iodine value or absorption isothermal curve.

Yield coefficient: 0.75–0.85The coefficient cannot be determined in advance because it depends on:• the absorbing capacity of the sorbent used• the chemical composition of trapped substances• a degree of saturation of the sorbet

Non-impregnated activated carbonAdsorption filters with activated carbon

Packaging

Bags of 25 kg Big Bag of 500 kgPossibility of regeneration

Yes – thermal reactivation

HIG H EFFICIEN CY

H V A C

PLUS SERVICE


I N D U S T R Y

FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ES

AD

SOR

PTI

ON

FIL

TER

S W

ITH

AC

TIVA

TED

C

AR

BO

NA

CC

ESSO

RY

EQU

IPM

ENT

IND

UST

RIA

L FI

LTR

ATIO

N

SYST

EMS

94

Impregnated activated carbonAdsorption filters with activated carbon

Packaging

Bags or barrels of 25 – 30 kgPossibility of regeneration

No

Filter propertiesImpregnated granular activated carbon is used for the adsorption of gases and vapours that are adsorbed by standard activated carbon very little or are not adsorbed at all. These are low-molecular and polar substances with a low concentration and toxic effects. The complex chemical reaction of a harmful substance with an impregnating agent brings about the removal of the substance from the air – harmful gases are chemically bonded to the impregnating agent in activated carbon (chemical adsorption). When it is required to separate various harmful substances in one unit at the same time, it is necessary to design a multi-stage filtration unit with activated carbon impregnated at various levels.

Field of applicationFor use in the KS KOPA, KS-BD, KS KOPA BIG, KS BD BIG systems.

Waste disposalEnvironmentally friendly disposal according to applicable standards and laws.

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9


I N D U S T R Y


95

ACCESSORY EQUIPMENTPressure gauges are used for detection of pressure dropes in built-in air filters. They may be used to measure underpressure or overpressure (e.g. in spraying boxes). Due to an easy mounting and low price, they are indispensable for detecting the final pressure drop of the filter. It increases substantially the efficiency of use of a filter and brings operating costs savings.

Pressure gauges can be mounted easily on filter chambers and they are supplied with accessories (contrast liquid, delivery hoses...) or with the possibility of electronic connection to automatic control (a higher measurement and regulation system). We supply pressure gauges in ranges from 50 to 5,000 Pa. We supply also a Magnehelic line of pressure gauges in the range from 1,000 – 5,000 Pa.

96

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

Pressure gauges for pressure drop measurementAccessory equipment

7030 with an inclined tubePressure gauge descriptionThe inclined tube (made of acrylic) with the possible setting of 2 ranges, i.e. 0 – 250 Pa and 0 – 500 Pa, is located in a plastic case. The vessel with contrast liquid is located in the back part of the case. The pressure gauge is supplied with accessories.

Measurement rangeOptional (tube inclination setting): 0 – 250 Pa and 0 – 500 Pa.

7030-EK with inclined tube and electronic control (optional)Pressure gauge descriptionThe inclined tube (made of acrylic) with the possible setting of 2 ranges, i.e. 0 – 250 Pa and 0 – 500 Pa, is located in a plastic case. The vessel with contrast liquid is located in the back part of the case. The pressure gauge is supplied with adjustable electrical contacts for the connection to the measurement and control system.

Measurement rangeOptional (tube inclination setting): 0 – 250 Pa and 0 – 500 Pa

Accessory equipmentContrast liquid (blue), bushes, hoses and fastening screws.


G

PLUS SERVICE H V A CI N D U S T R Y

97

Range up to 1,000Pressure gauge descriptionThe acrylic U-tube is located in a steel case. The pressure gauge range is 1,000 Pa. The manometer is supplied without accessories.

Measurement range0 – 1,000 Pa

Range up to 2,500Pressure gauge descriptionThe acrylic U-tube is located on a plastic scale. The pressure gauge is supplied with accessories.


Accessory equipmentContrast liquid (blue), bushes, hoses and fastening screws.

Pressure gauges for pressure drop measurementAccessory equipment

Range up to 5,000 – MagnehelicPressure gauge descriptionThe scale with a range of 0 – 5,000 Pa is located in a metal case. The pressure gauge is supplied with accessories.


Accessory equipmentBushes, hoses, and erection bolts.

We supply the complete line of Magnehelic pressure gauges.

H V A C


FILT

ER M

EDIA

PO

CK

ET F

ILTE

RS

FRA

ME

FILT

ERS

CO

MPA

CT

FILT

ERS

AB

SOLU

TE F

ILTE

RS

FOR

MIC

RO

PAR

TIC

LES

CO

MP

ON

ENTS

FO

R C

LEA

N R

OO

MS

FILT

ER U

NIT

S FO

R H

VAC

M

OU

NTI

NG

FR

AM

ESA

DSO

RP

TIO

N F

ILTE

RS

WIT

H A

CTI

VATE

D C

ARB

ON

AC

CE

SSO

RY

EQ

UIP

ME

NT

IND

UST

RIA

L FI

LTR

ATIO

N

SYST

EMS

98

The Company provides the following servicesPreventive inspection of HVAC – it is a preventive procedure with the aim to improve reliability of a machine operation, reduce a fault rate and foresee possible faults.The inspection of V-belts, parts and components of the power unit of the equipment – intactness of the runner wheel, bearings, motor parts, the inspection of vibration insulators – their function and integrity, the inspection of the heating system – tightness, medium leaks – water, vapour, the inspection of the equipment frame or tightening loosened screwed connections, the inspection of the function of pressure difference sensors – replenishing the missing contrast fluid, the inspection of damping dilatation inserts – their intactness, the tightness of the whole HVAC system and removal of faults of the items mentioned above, the replacement of filter elements connected with environmentally-friendly disposal and collection of the used filters

Inspections of fire dampers – overall inspections, servicing all HVAC fire dampers including a record of the inspection or creating a new inspection book

Noise measurement – any requirements in the field of noise measurement on HVAC equipment, including the processing of reports and proposals of corrective measures

Industrial filtration – any services in the field of industrial filtration, spare filter deliveries, maintenance, servicing, inspections of equipment, processing a proposal for filtration optimisation, project processing of a request, analyses of occurred faults, inspections of fire protection systems

Filtration of harmful substances with activated carbon – servicing and maintenance of filtration equipment with activated carbon, filter replacements, pneumatic transport of activated carbon in special filtration devices, storage tanks with an activated carbon hopper, deliveries of new filling, environmentally-friendly disposal and collection of activated carbon including acceptance reports

Clean rooms – replacements of HEPA filters, disinfection of HVAC, pipelines and laminar ceilings, validation according to the requirement, processing acceptance reports, processing and implementation of clean rooms, consultancy service for clean rooms

Cooling, humidification and dehumidification – any activities in the field of servicing cooling HVAC technologies, inspections of cooling units, repairs of tightness, replenishing a coolant, installations of new equipment, project processing, implementation designs. Repairs and maintenance of dehumidification and humidification equipment

M&R – measuring and regulation – regular servicing and maintenance, repairs of the existing systems, turnkey reconstructions of M&R from the preparation of project documentation up to the implementation

Paint shop filter management – air flow rate measuring, monitoring flow directions, measuring air flow rate velocity, particle size measuring, filtration optimisation, preparation of measurement reports, assurance of a laboratory analysis of painted surface defects, monitoring the occurrence of potential causes with a proposal of corrective measures

The Company ensures installations Instillations of its own delivered HVAC equipment or within sub-contracting services according to the customer's requirements.

Service and installations

As

part

of o

ur p

rogr

amm

e of

con

tinuo

us im

prov

emen

t, K

S K

lima-

Serv

ice,

a.s

. re

serv

es th

e rig

ht to

cha

nge

the

spec

ifica

tion

with

out p

rior n

otic

e. 0

1/2

01

9

KS Klima-Service, a.s. Evropská 710, 261 01 Příbram II

T +420 318 541 111F +420 318 541 112

E [email protected] www.ksklimaservice.cz

FILTRATION EQUIPMENT AIR FILTERS And FILTRATION … FILTRATION EQUIPMENT AIR FILTERS And FILTRATION...

Documents

Transcript of FILTRATION EQUIPMENT AIR FILTERS And FILTRATION … FILTRATION EQUIPMENT AIR FILTERS And FILTRATION...