2900 MacArthur Blvd. Northbrook, IL. USA 60062 www.serfilco.com (800) 323 - 5431

FILTER CARTRIDGESBULLETINM-109_SJAN 2013

SERFILCO offers a wide selection of filter cartridge styles, material selections and porosities to satisfy almost any filtration application in the metal finishing and electronics industries. They can be used with SERFILCO filter cham-bers and systems or as replacements for other single or multiple cartridge housings.

SERFILCO offers stock cartridges in minimum quanti-ties. They are available for immediate delivery. To meet your annual needs, enter a blanket order with scheduled releases to earn the lowest quantity price, plus gain "just in time" delivery.

WATER / CHEMICALS / PLATING METAL FINISHING SOLUTIONS ELECTRONICS / PC BOARD MANUFACTURING

DIAMOND DEPTH, MAXI-DEPTH, MAXI-WIND, HI-PERF, and PUREFYBE filter cartridges offer true depth filtration. Wound cartridges are manufactured to provide selective particle retention throughout the media's depth which translates to high solids retention and longer service life with relatively low pressure drop.

DEPTH WOUND FILTER CARTRIDGESPOLYSPUN melt bonded filter cartridges are man-ufactured from continuous fibers thermally bonded and spun over a heated mandrel. Controlled graded density construction provides true depth filtration. These cartridges are free of resins, lubricants and anti-static agents; they are non-migrating and suit-able for high purity applications.

MELT BONDED FILTER CARTRIDGES

POLYSERF pleated filter cartridges are manu-factured of continuous polypropylene microfibers self-bonded by a unique process that controls media uniformity and density. They provide large surface area for efficient particle removal with very low pressure drops. These cartridges are also free of resins, binders or surfactants for high purity applications.

PLEATED FILTER CARTRIDGES

SERFILCO sleeve-type filter cartridges may be used uncoated or precoated with filter aid. Sleeve cartridges are interchangeable with any regular cartridge of corresponding length. They are re-usable for economical operation and, therefore, minimize disposal costs.

SLEEVE-TYPE FILTER CARTRIDGESIMPORTANT: Verify media for solution compatibility before installation and use.

First letter(s) in cartridge Code No. is depth type filter media identification.See Model Number identification on Page 3.

Purefybe©, Bleached Cotton and Polyspun© media are free of "sizing" and yarn "finish" substances. We recommend all other media be flushed with warm water prior to use, depend-ing upon application requirements.

2900 MacArthur Blvd. Northbrook, IL. USA 60062 www.serfilco.com (800) 323 - 5431

POLYPROPYLENE W/ POLYPROPYLENE CORE

• 2½" O.D. nominal provides 3.5 square feet of filter area per 10" length

• Precision wound

• Micron accuracy tested

• Wide selection of media material, cartridge lengths and micron ratings

• Excellent chemical resistance (see TM-110)

• Fits any D.O.E. style vessel

• Improve finished goods quality, and minimize maintenance and rework with longer continuous high-flow operation

• Save money with lower cost, high surface area

• Reduce inventory, get quantity discounts, and "just-in-time" scheduled releases, by placing blanket order

FEATURES

BENEFITS

MODELMICRON

RETENTIONRATING

NOMINAL LENGTH

CARTONQTY

01U10U01U20U01U30U01U40U

1

10"20"30"40"

30151510

03U10U03U20U03U30U03U40U0

3

10"20"30"40"

30151510

5U10U05U20U05U30U05U40U

5

10"20"30"40"

30151510

10U10U10U20U10U30U10U40U

10

10"20"30"40"

30151510

15U10U15U20U15U30U15U40U

15

10"20"30"40"

30151510

MODELMICRON

RETENTIONRATING

NOMINAL LENGTH

CARTONQTY

20U10U20U20U20U30U20U40U

20

10"20"30"40"

30151510

30U10U30U20U30U30U30U40U

30

10"20"30"40"

30151510

50U10U50U20U50U30U50U40U

50

10"20"30"40"

30151510

75U10U75U20U75U30U75U404

75

10"20"30"40"

30151510

99U10U99U20U99U30U99U40U

100

10"20"30"40"

30151510

200U10U200U20U200U30U200U40U

200

10"20"30"40"

30151510

For ordering information, see page 11

M-109_SPage 2DIAMOND-DEPTH WOUND FILTER CARTRIDGES

2900 MacArthur Blvd. Northbrook, IL. USA 60062 www.serfilco.com (800) 323 - 5431

MODELMICRON

RETENTIONRATING

NOMINAL LENGTH

CARTONQTY

05C10T10C10T15C10T30C10T50C10T75C10T99C10T

51015305075100

10" 30

UNBLEACHED COTTON w/TINNED STEEL CORE

MODELMICRON

RETENTIONRATING

NOMINAL LENGTH

CARTONQTY

05B10T05B20T05B30T

510"20"30"

301515

15B10T15B20T15B30T

1510"20"30"

301515

30B10T30B20T30B30T

3010"20"30"

301515

50B10T50B20T50B30T

5010"20"30"

301515

99B10T99B20T99B30T

10010"20"30"

301515

BLEACHED COTTON w/ POLYPROPYLENE COREFree of "sizing" and yarn "finish" substances.

Meets FDA regulations for potable water.

M-109_SPage 3

BLEACHED COTTON w/TINNED STEEL CORE

MODEL NUMBER IDENTIFICATION

For ordering information, see page 11

MODELMICRON

RETENTIONRATING

NOMINAL LENGTH

CARTONQTY

001C4U001C6U01C10U01C20U01C30U

1

4"6"10"20"30"

6030301515

003C6U03C10U03C20U03C30U03C40U

3

6"10"20"30"40"

3030151510

05C10U05C20U05C30U

510"20"30"

301515

010C6U10C10U10C20U10C30U

10

6"10"20"30"

30301515

015C4U015C6U15C10U15C20U15C30U15C40U

15

4"6"10"20"30"40"

603030151510

20C10U20C20U20C30U

2010"20"30"

301515

030C6U30C10U30C20U30C30U

30

6"10"20"30"

30301515

50C10U50C20U50C30U50C40U

50

10"20"30"40"

30151510

75C10U75C20U75C30U

7510"20"30"

301515

99C10U99C20U99C30U

10010"20"30"

301515

135101520305075

99 (100)

EXTENDED COREMEDIA MATERIAL CORE COVERCORE MATERIAL

None - No symbol

ECU - Polypropylene

ECS - 316 SS

EPS - One piece polypropylene spring & top seal

B - Unbleached cottonC - Bleached cottonCU - Carbon & PolypropyleneG - Glass fiber (Unbaked)H - Hi-PerfK - PolyesterN - NylonO - Orlon®

P - Fibrillated polypropylene (Purefybe©)R - RayonU - Polypropylene (Wound & Polyspun©)W - Potable water polypropylene1

Orlon is a registeredtrademark of DuPont.

None - No symbol

C - Cover compatible with media

U - Polypropylene

S - 316SS

A - 304SS

T - Tinned Steel

NOMINALMICRON RATING

4 (3-7/8") 6 (5-7/8") 8 (7-7/8") 9.8 (9-3/4")10 (10")19.8 (19-3/4")20 (20")29.8 (29-3/4")30 (30")40 (40")

10 U 10 C -ECSUExample of Model Number:

NOMINALLENGTH

1Meets FDA regulations for potable water (drinking water)

MAXI-DEPTH WOUND FILTER CARTRIDGESMAXI-DEPTH

2900 MacArthur Blvd. Northbrook, IL. USA 60062 www.serfilco.com (800) 323 - 5431

FREE OF EXTRACTABLES, LUBRICANTS, BINDERS, ANTI-STATIC AND SIZING AGENTS.

APPLICATIONS Plating Solutions Photographics D.I. & Tap Water Electronics PC Board Mfg. Pharmaceuticals Coatings Chemicals

• 100% Pure polypropylenewith polypropylene center core

• Fibrillated fiber, organic-free, non-migrating A smooth, firm filter media that can be reused

• High temperature performancePlating solutions and most chemicals to 200°F (93°C)(see chem. guide TM-110)

• Length to fit any chamber10", 20", and 30" x 2½" nominal O.D.

• Selective depth filtration

Purefybe is an all polypropylene cartridge wound of fibers free of extractables. It is designed for filtration of electroforming, precious metals and all other plating solutions or applications requiring organic-free filter media. It is also recommended for gelatinous precipitates such

as iron and aluminum hydroxides which can be dissolved with acids. Enter a blanket order with scheduled releases to earn the lowest quantity price, plus gain "Just in time" delivery.

M-109_SPage 4

MODELMICRON

RETENTIONRATING

NOMINAL LENGTH

CARTONQTY

01P10U01P20U01P30U

110"20"30"

301515

03P10U03P20U03P30U

310"20"30"

301515

05P10U05P20U05P30U

510"20"30"

301515

10P10U10P20U10P30U

1010"20"30"

301515

MODELMICRON

RETENTIONRATING

NOMINAL LENGTH

CARTONQTY

15P10U15P20U15P30U

1510"20"30"

301515

20P10U20P20U20P30U

2010"20"30"

301515

25P10U25P20U25P30U

2510"20"30"

301515

50P10U50P20U50P30U

5010"20"30"

301515

99P10U99P20U99P30U

10010"20"30"

301515

For ordering information, see page 11

PUREFYBE© DEPTH WOUND CARTRIDGES

2900 MacArthur Blvd. Northbrook, IL. USA 60062 www.serfilco.com (800) 323 - 5431

MODEL LENGTH CARTON QTYU0.5A10UCU0.5A20UCU0.5A30UC

102030

301515

M-109_SPage 5

FOR CHROMIC / SULFURIC / NITRIC ACIDSHI-PERF filter cartridges are constructed of proprietary materials which are specifically designed for chrome plating applications, nitric and sulfuric acid solutions. They are equally well suited for aggressive solvents and bases.

HI-PERF

These cartridges resist all strong oxidizing acids (except hydrofluoric). Especially suitable for hot chromic acid and chrome etch solutions. Glass fiber cartridges can be used at higher temperatures than any of the other fiber type filter media. Glass fiber offers the additional advantage of being impervious to highly corrosive agents. Cartridges are unbaked on a polypropylene core and include a woven glass fiber core cover. Max. 200°C).

2-1/2" nominal diameter x 10"

Wound on a polypropylene core with a hemp core cover. Offers a 0.5 micron (nominal) retention. Free of sizing agents, it is ideal for ultra clean water for the electronics industry and many plating solutions. 1 GPM aqueous flow per 10" length @ 5 PSI pressure drop. (3.78 LPM @ .35 kg/cm2)

GLASS FIBER

2-1/2" nominal diameter

COTTON (.5 micron organic free)Wound on a corrosion resistant polypropylene core with a polypropylene core cover. Offers a 0.5 micron (nominal) retention. For efficient filtration of plating solutions for electronics. 1 GPM aqueous flow per 10" length @ 2 PSI pressure drop. (3.78 LPM @ .14 kg/cm2). 2-1/2" nominal O.D.

POLYPROPYLENE (.5 micron)HI-DENSITY COTTON and POLYPROPYLENE

MODEL MICRON RETENTION RATING

NOMINAL LENGTH

CARTONQTY

05H10U05H20U05H30U05H40U

5

10203040

30151510

15H10U15H20U15H30U15H40U

15

10203040

30151510

30H10U30H20U30H30U30H40U

30

10203040

30151510

50H10U50H20U50H30U50H40U

50

10203040

30151510

99H10U99H20U99H30U99H40U

100

10203040

30151510

MODELMICRON

RETENTIONRATING

LENGTH CARTONQTY

05G10UC05G20UC05G30UC

5102030

301515

20G10UC20G20UC20G30UC

20102030

301515

MODEL CARTON QTY

C0.5A10UH 30

DEPTH WOUND CARTRIDGES

2900 MacArthur Blvd. Northbrook, IL. USA 60062 www.serfilco.com (800) 323 - 5431

4" DIAMETER X 9¾" LONGMaxi-Wind cartridges provide extended solids loading at greater effi-ciency. Their dirt holding capacity is equivalent to 10 square ft. (.93m2) of surface filtration. They are designed for maximum solids loading at a recommended flow rate of 10 U.S. GPM (38 LPM). For Model GPO10-1 filter chambers and replacement for original equipment cartridges.

4" DIAMETER X 18" LONG

POLYPROPYLENE w/POLYPROPYLENE COREFor good chemical resistance

* Minimum order carton of 10.

POLYPROPYLENE FOR GOOD CHEMICAL RESISTANCE

UNBLEACHED COTTON FOR OILS, SOLVENTS & SEMI-AQUEOUS CLEANERS

These cartridges provide a dirt holding capacity equivalent to 18 sq. ft. of surface filtration. They are designed for maximum solids loading at a recommended flow rate of 18 GPM (68 LPM). For Models (718), CB Filtra-tion Chambers, and as replacement for original equipment cartridges.

PUREFYBE© (Fibrillated polypropylene) w/POLYPROPYLENE COREWound of fibers free of "sizing" and yarn "finish" substances

* Minimum order carton of 10.

M-109_SPage 6

MODEL MICRON RETENTION RATING

CARTONQTY

0.5U9.8U41U9.8U45U9.8U410U9.8U4

.51510

10

MODELMICRON

RETENTION RATINGCARTON

QTY5P9.8U410P9.8U425P9.8U450P9.8U499P9.8U

5102550100

10

MODELMICRON RETENTION

RATINGCARTON

QTY1U18A43U18A45U18A410U18A420U18A430U18A4

135102030

5

MODELMICRON RETENTION

RATINGCARTON

QTY1B18A43B18A45B18A410B18A420B18A430B18A4

135102030

5

MAXI-WIND© 4" DIAMETER FILTER CARTRIDGES

2900 MacArthur Blvd. Northbrook, IL. USA 60062 www.serfilco.com (800) 323 - 5431

M-109_SPage 7

• 100% Pure polypropyleneExtruded for structural strength without center core

• High temperature performancePlating solutions and most chemicals to 140°F (60°C) Water to 212°F (100°C)

• Unique fiber bondingFour to five hundred layers of melt-bonded polypropylene fiber

• Length to fit any chamber - 9.75", 10", 20", or 30"• Selective depth filtration - 1, 5, 10, 20, 50 or 75 micron

SERFILCO POLYSPUN depth filter cartridges are individually packaged to provide 1 to 75 micron high purity filtration and an organic free, pure polypropylene media. Their outstanding

chemical resistance, fiber free melt-bonded media and excellent flow characteristics present a filter cartridge that meets the tough requirements of today's technology.

APPLICATIONSPlating solutions / Potable waterTap & D.I. water / CoatingsElectronics / PhotographicsFDA Approved for food contact applications

FREE OF RESINS, LUBRICANTS,BINDERS & ANTI-STATIC AGENTS

** Aqueous flow at 5 U.S. GPM (19 LPM) per 10" length.

MODELMICRON

RETENTIONRATING

NOMINAL LENGTH

CARTONQTY

01U9.801U1001U2001U30

1

9.75102030

30301515

05U9.805U1005U2005U30

5

9.75102030

30301515

10U9.810U1010U2010U30

10

9.75102030

30301515

MODELMICRON

RETENTIONRATING

NOMINAL LENGTH

CARTONQTY

20U1020U2020U30

20102030

301515

30U1030U2030U30

30102030

301515

50U1050U2050U30

50102030

301515

75U1075U2075U30

75102030

301515

MICRON 1 5 10 20 30 - 75PRESSURE

DROP (PSI) **5 2 1 .7 .5

POLYSPUN© DEPTH FILTER CARTRIDGESPOLYSPUN© DEPTH

2900 MacArthur Blvd. Northbrook, IL. USA 60062 www.serfilco.com (800) 323 - 5431

M-109_SPage 8

SUPERIOR FLOW CHARACTERISTICSAT LOW PRESSURE DROP.

FREE OF RESINS, BINDERS OR SURFACTANTS CLEANABLE AND REUSABLE

SERFILCO POLY-SERF pleated filter cartridges are composed of continuous polypropylene microfibers self-bonded by a unique process that controls media uniformity and density.

• Self-bonded polypropylene mediaVinyl end caps, polypropylene center core and outer net(See a chemical resistance chart)

• High temperature performance To 180°F (82°C) @ 20 PSID

• Pleated for extended surface area4 sq. ft. (.37 sq. meters) each 10" length

• Length to fit any chamber10", 20", 30", 40" x 2-5/8"diameter

• Selective filtration1, 5, 10, 25 and 50 micron (Nominal)

• Individually packaged

Plating solutions / Photographic Inks & oils / Chemicals / Water Coatings / PC board mfg.

POLY-SERF cartridges provide efficient particle removal from aqueous and non-aqueous solutions with outstanding contaminant holding capacity. They provide excellent chemical resistance, high flow rates at low pressure drop and can be washed for reuse.

MODELMICRON

RETENTIONRATING

NOMINAL LENGTH

CARTONQTY

PL-U1U10UPL-U1U20UPL-U1U30UPL-U1U40U

1

10"20"30"40"

40202020

PL-U5U10UPL-U5U20UPL-U5U30UPL-U5U40U

5

10"20"30"40"

40202020

PL-U10U10UPL-U10U20UPL-U10U30UPL-U10U40U

10

10"20"30"40"

40202020

MODELMICRON

RETENTIONRATING

NOMINAL LENGTH

CARTONQTY

PL-U25U10UPL-U25U20UPL-U25U30UPL-U25U40U

25

10"20"30"40"

40202020

PL-U50U10UPL-U50U20UPL-U50U30UPL-U50U40U

50

10"20"30"40"

40202020

WATER FLOW RATE AT10 GPM (38 LPM) PER 10" LENGTH

MICRON PSID PRESSURE DIFFERENTIAL

15

10

0.40.30.2

POLY-SERF© PLEATED FILTER CARTRIDGES

2900 MacArthur Blvd. Northbrook, IL. USA 60062 www.serfilco.com (800) 323 - 5431

• InterchangeableSleeve cartridges are interchangeable with any regular car-tridge of corresponding length and diameter.

• CPVC and polypropylene construction

• 15 micron seamless sleeveDesigned for precoating with all types and grades of filter aid to provide a high quality filtrate; however, may also be used without precoat.

• Easy to clean

• Reusable

• Reduced operating costs

• Reduced disposal costs

DESCRIPTION

M-109_SPage 9

PRICE CODE NO.

OPTIONAL

The SERFILCO Sleeve-Type Filter Cartridge may be used uncoated or with filter aid or filter aid with carbon. As the filters become dirt-laden, they may easily be backwashed, or the sleeves may be removed, rinsed or laundered and put back into service.

This unique design of filter cartridges will not only help reduce operating costs, but will simplify and speed up any pre-coat type filtration process.

Each filter cartridge consists of a polypropylene top and bottom seat, a polypropylene woven fabric sleeve, a poly-propylene support mesh, a CPVC support column, EPDM "O"-rings and a vinyl coated spring to assure good sealing.These filter cartridges can be quickly and easily assembled and re-assembled — no tools are required.

CLEANABLE SLEEVE CARTRIDGES

Viton® elastomersfor sleeve assembly O-VSL

FEATURES

TO ORDER: Use Price Code No.

ECONOMICAL ALTERNATIVETO DISC-TYPE FILTER

Viton is a registered trademark of DuPont Dow Elastomers.

BENEFITS

SLEEVELENGTH

X2-1/2" DIA.

SURFACE AREASQ. FT.

FOR CHAMBER STYLE REPLACEMENTSLEEVE ONLYSINGLE COLUMN MULTIPLE COLUMN

PRICE CODE NUMBER10"20"30"40"50"

0.61.21.82.43.0

99-070199-070299-070399-0715

–

99-070499-070599-070699-070799-0708

88-0161 A88-0162 A88-0163 A88-0164 A88-0165 A

RE-USABLE SLEEVE TYPE FILTER CARTRIDGES

2900 MacArthur Blvd. Northbrook, IL. USA 60062 www.serfilco.com (800) 323 - 5431

• Use Model Number to order.

• All catridges sold in carton quantity only.

• For larger quantities, consult SERFILCO Sales Dept. for quantity pricing.

• Enter a blanket order with scheduled releases to earn the lowest quantity price, plus gain "Just in Time" delivery.

• Minimum order $50.00

• F.O.B. shipping point

• Specifications subject to change without notice.

M-109_SPage 10

TABLE E – MODEL NUMBER IDENTIFICATION

Consult Sales Dept. for other filter media, core materials, diameters, lengths and micron ratings. See Table E below.

SUBSTITUTIONS AND ACCESSORIES, CORE COVER AND EXTENDED CORE

SUBSTITUTE CORE MATERIALTINNED STEEL -T TO:

S - 316SSA - 304SS

T - Polypro.

POLYPROPYLENE -U TO:S - 316SSA - 304SST - Tinned

Steel

CORE COVER

EXTENDED CENTER CORE

MATERIALADD TO

MODEL NO.316SS -ECS

Polypropylene -ECUOne piecepolypropylene

spring & top seal -EPS

TABLE A

DEPTH CARTRIDGE PACKAGING

LENGTH (in.) 4 6, 10 20, 30 40CARTON

QTY60 30 15 10

135101520305075

99 (100)

EXTENDED COREMEDIA MATERIAL CORE COVERCORE MATERIAL

None - No symbol

ECU - Polypropylene

ECS - 316 SS

EPS - One piece polypropylene spring & top seal

B - Unbleached cottonC - Bleached cottonCU - Carbon & PolypropyleneG - Glass fiber (Unbaked)H - Hi-PerfK - PolyesterN - NylonO - Orlon®

P - Fibrillated polypropylene (Purefybe©)R - RayonU - Polypropylene (Wound & Polyspun©)W - Potable water polypropylene1

Orlon is a registeredtrademark of DuPont.

None - No symbol

C - Cover compatible with media

U - Polypropylene

S - 316SS

A - 304SS

T - Tinned Steel

NOMINALMICRON RATING

4 (3-7/8") 6 (5-7/8") 8 (7-7/8") 9.8 (9-3/4")10 (10")19.8 (19-3/4")20 (20")29.8 (29-3/4")30 (30")40 (40")

10 U 10 C -ECSUExample of Model Number:

NOMINALLENGTH

1Meets FDA regulations for potable water (drinking water)

Replace the last letter "T" in theModel Number with "S", "A" or "U".

Consult Sales Dept. for other filter media, core materials, diameters, lengths, and micron ratings. See Table E below.

Replace the last letter "U" in theModel Number with "S", "A" or "T".

Add "C" after core material letterin Model Number

TABLE B TABLE C

TABLE D

CARTRIDGE ORDERING INFORMATION