mycommittees.api.orgmycommittees.api.org/standards/copm/Sh… · XLS file · Web view ·...
Transcript of mycommittees.api.orgmycommittees.api.org/standards/copm/Sh… · XLS file · Web view ·...
API COPM Standardization Activities rev. 05/08/2023
05/08/2023 1
C/SC Ch./Std Chapter/Standard/Title Edition/Yr. Status/Comments
COMET D. Comstock 1 2nd Ed 7/94 N/A N/A No
COMET [R. Burnison] 1 SP 2nd Ed 7/94 N/A N/A N/A No
COLM 2.2A 2022 N/A N/A Yes 2014 & 2015
COLM 2.2B 2018 N/A N/A No
COLM 2.2C 2018 N/A N/A No
COLM 2.2D 2019 N/A N/A No
COLM 2.2E 2019 N/A N/A No
COLM 2.2F 2019 N/A N/A No National Adoption of ISO 12917-2:2002.
COLM 2.2G 1st Ed 7/14 2019 N/A N/A No
COLM 2.7 Calibration of Barge Tanks 2019 N/A N/A No
COLM [J. Koern] 2.8A 2017 Reaffirmation No
COLM 2.8B 2019 N/A N/A No
COLM [A. Kay] 3.1A 3rd Ed 8/13 2018 N/A N/A No
COLM [R. Burnison] 3.1A SP 3rd Ed 8/13 2018 N/A N/A N/A Spanish translation of 3rd edition's English version.
Chairman or [contact]
Due for Action
Ballot Status
Current Ballot Type
SR3 Active
SR3 Approval Year
Vocabulary — Not a balloted standard
Not part of 5 year
review cycle
Document assigned to COMET Oct 2002. T&D database is on the COMET SharePoint site and is accessible by everyone. Members can request API staff for log-in info to also review "Owner Approved Definitions" for further alignment of terms and definitions in COPM standards. API Staff is the point of contact for resolving terms and definitions issues in conjunction with COMET Chapter 1 WG during a standard revision or development. The Database can be accessed at: http://chapter1.api.org/
Vocabulario — Not a balloted standard
Spanish translation published Sept 2003 of 2nd edition’s English edition. STWG has begun working on translating the owner officer definitions for the database (see above) .
M. Zook D. Comstock
Measurement and Calibration of Upright Cylindrical Tanks by Manual Strapping Method
1st Ed 2/95 Rfmd 8/17
Ch. 2.2A was an update of API Std. 2550 (now withdrawn), on which ISO 7507-1 was based. SR3 approved by COPM at May 2014 net meeting. Further SR3 approved by COPM at May 2015 net meeting.
[M. Zook D. Comstock]
Calibration of Upright Cylindrical Tanks using the Optical Reference Line Method
1st Ed 3/89 Rfmd 1/13
Previously had a joint designation with ASTM as D4738-90. ASTM designation discontinued in 1996. Ch. 2.2B is not technically equivalent to ISO 7507-2. SR3 to revise Ch. 2.2B approved by COPM Dec 2007 (noted that the revision also needs to address withdrawn Std. 2550). Updated SR3 approved by COPM May 2008. Subsequently decided to develop as a separate standard – see Ch. 2.2G.
[M. Zook D. Comstock]
Tank Calibration by Optical Triangulation Method/ISO 7507-3
1st Ed 1/02 Rfmd 4/13
Modified National Adoption of ISO 7507-3:1993 [ANSI/API MPMS 2.2C-2002]. However, ISO 7507-3:2006 subsequently published.
[D. Trask D. Comstock]
Tank Calibration by Internal Electro-Optical Distance-Ranging Method/ISO 7507-4
1st Ed 8/03 Rfmd 3/14
Modified National Adoption of ISO 7507-4:1995. SR3 approved with modifications by COPM May 2006 proposing to update Ch. 2.2D with new edition of ISO 7507-4, published 2010. SR3 to revise to harmonize with other Ch. 2.2 standards approved by COPM at May 2014 net meeting. SR3 withdrawn at Oct 2017 meeting.
[M. Zook D. Comstock]
Petroleum and Liquid Petroleum Products — Calibration of Horizontal Cylindrical Tanks — Part 1: Manual Methods/ISO 12917-1
1st Ed 4/04 Errata 11/09 Rfmd 8/14
National Adoption of ISO 12917-1:2002. Technical Corrigendum to ISO 12917-1 issued by ISO in Oct 2009, also issued by API as an Errata to Ch. 2.2E in Nov 2009.
[M. Zook D. Comstock]
Petroleum and Liquid Petroleum Products — Calibration of Horizontal Cylindrical Tanks — Part 2: Internal Electro-Optical Distance-Ranging Method/ISO 12917-2
1st Ed 4/04 Rfmd 9/14
[M. Zook D. Comstock]
Calibration of Upright Cylindrical Tanks using the Total Station Reference Line Method
[M. Zook D. Comstock]
1st Ed 3/91 Rfmd 1/14
Joint standard with EI HM 2, Section 5A. Formerly had a joint designation with ASTM as D1407-65 (1990). ASTM designation withdrawn in 1995.
Calibration of Tanks on Ships and Oceangoing Barges
1st Ed 3/91 Rfmd 3/12
Closed Ballot
Joint standard with EI, HM2, Section 5B. Reaffirmation ballot 4184 closed 21 August 2017.
[M. Zook D. Comstock]
Establishment of the Location of the Reference Gauge Point and the Gauge Height of Tanks on Marine Tank Vessels
1st Ed 9/95 Rfmd 12/14
Manual Gauging of Petroleum and Petroleum Products
Previously corresponded to an ASTM standard, D1085-65 (1990). ASTM standard withdrawn in 1995.
Práctica Estándar para la Medición Manual de Petróleo y Productos de Petróleo — Not a balloted standard
API COPM Standardization Activities rev. 05/08/2023
05/08/2023 2
C/SC Ch./Std Chapter/Standard/Title Edition/Yr. Status/CommentsChairman or [contact]
Due for Action
Ballot Status
Current Ballot Type
SR3 Active
SR3 Approval Year
COLM 3.1B 2021 SC Yes 2016
COLM [R. Burnison] 3.1B SP 2nd Ed 6/01 N/A N/A N/A No Spanish translation of 2nd edition's English version.
COLM (open) 3.2 2018 N/A N/A No
COLM [R. Burnison] 3.2 SP 1st Ed 9/95 N/A N/A N/A No Spanish translation of 1st edition’s English version.
COLM (open) 3.3 2022 N/A N/A No Reaffirmation ballot 3905 closed 1 Sept 2016. Ballot passed.
COLM [R. Burnison] 3.3 SP 1st Ed 6/96 N/A N/A N/A No Spanish translation of 1st edition’s English version.
COLM (open) 3.4 2021 N/A N/A No
COLM [R. Burnison] 3.4 SP N/A N/A N/A No Spanish translation of 1st edition’s English version.
COLM (open) 3.5 2018 N/A N/A No
COLM [R. Burnison] 3.5 SP N/A N/A N/A No Spanish translation of 1st edition’s English version.
COLM 3.6 2022 N/A N/A No
COLM [N. Thurlby] 4.1 Proving Systems—Introduction 2019 N/A N/A No
COLM [R. Burnison] 4.1 SP N/A N/A N/A No Spanish translation of 3rd edition’s English version.
COLM 4.2 Displacement Provers N/A N/A Yes 2015
COLM (open) 4.3 Small Volume Provers N/A N/A N/A N/A Incorporated into Ch. 4.2.
C. Skaug H. Gleitz
Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging
2nd Ed 6/01 Rfmd 2/16
Closed Ballot
SR3 for revision approved by COPM at Dec 2016 net meeting. Ballot 4142 closed 23 July 2017.
Práctica Estándar para la Medición del Nivel de Hidrocarburos Líquidos en Tanques Estacionarios Mediante Medición Automática de Tanque — Not a balloted standard
Gauging Petroleum and Petroleum Products in Tank Cars
1st Ed 8/95 Rfmd 5/13
Práctica Estándar para la Medición de Petróleo y Productos Derivados del Petróleo en Vagones Cisterna — Not a balloted standard
Level Measurement of Liquid Hydrocarbons in Stationary Pressurized Storage Tanks by Automatic Tank Gauging
1st Ed 6/96 Rfmd 3/17
Práctica Estándar para Medición del Nivel de Hidrocarburos Líquidos en Tanques de Almacenamiento Presurizados Estacionarios Mediante Medición Automática de Tanque — Not a balloted standard
Standard Practice for Level Measurement of Liquid Hydrocarbons on Marine Vessels by Automatic Tank Gauging
1st Ed 4/95 Rfmd 5/16
Práctica Estándar para Medición del Nivel de Hidrocarburos Líquidos en Buques Mediante Medición Automática de Tanque — Not a balloted standard
1st Ed 4/95
Standard Practice for Level Measurement of Light Hydrocarbon Liquids Onboard Marine Vessels by Automatic Tank Gauging
1st Ed 3/97 Rfmd 2/13
ISO 18132-1 and ISO 18132-3 published 2011-08-01. ISO standards were originally to be balloted proposing adoption as API Ch. 3.5.1 and Ch. 3.5.2 but after further review, 2008 SR3 withdrawn at March 2015 meeting.
Práctica Estándar para la Medición del Nivel de Hidrocarburos Líquidos Livianos en Buques Mediante Medición Automático de Tanque — Not a balloted standard
1st Ed 3/97
[M. Dousedebes H. Gleitz]
Measurement of Liquid Hydrocarbons by Hybrid Tank Measuring Systems
1st Ed 2/01 Errata 9/05
Rfmd 1/17
3rd Ed 2/05 Rfmd 6/14
Sistemas de Prueba—Introducción — Not a balloted standard
3rd Ed 2/05
K. Wilson N. Thurlby
3rd Ed 9/03 Add 1 2/15 Rfmd 3/11
2020see
Addendum
SR3 approved by COPM at May 2015 net meeting. Due for action date reflects publication of Addendum 1.
Withdrawn 7/04
API COPM Standardization Activities rev. 05/08/2023
05/08/2023 3
C/SC Ch./Std Chapter/Standard/Title Edition/Yr. Status/CommentsChairman or [contact]
Due for Action
Ballot Status
Current Ballot Type
SR3 Active
SR3 Approval Year
COLM [P. Kosewicz] 4.4 Tank Provers 2020 N/A N/A No
COLM [H. James] 4.5 Master Meter Provers 2021 N/A N/A No
COLM G. Cotton 4.6 Pulse Interpolation 2018 N/A N/A Yes 2017 SR3 approved by COPM at June 2017 net meeting.
COLM [S. Whitman] 4.7 Field Standard Test Measures 2019 N/A N/A No
COLM K. Wilson 4.8 Operation of Proving Meters 2nd Ed 9/13 2018 Open Ballot WG Yes 2017
COLM D. Jacobs 4.9.1 2020 Open Ballot SC Yes 2014 & 2017
COLM [D. Comstock] 4.9.2 2020 N/A N/A No
COLM [M. Desinger] 4.9.3 2020 N/A N/A No
COLM [S. Whitman] 4.9.4 2020 N/A N/A No
COLM [M. Bruck] 5.1 2022 N/A N/A No
COLM [R. Burnison] 5.1 SP 4th Ed 9/05 N/A N/A N/A No Spanish translation of 4th edition’s English version.
COLM [M. Bruck] 5.2 2020 N/A N/A No
COLM [R. Burnison] 5.2 SP 3rd Ed 9/05 N/A N/A N/A No Spanish translation of 3rd edition’s English version.
COLM [M. Bruck] 5.3 N/A N/A No
COLM [M. Bruck] Addendum to Ch. 5.3, 5th Ed 2019 N/A N/A No
COLM [R. Burnison] 5.3 SP 5th Ed 9/05 N/A N/A N/A No Spanish translation of 5th edition’s English version.
COLM [M. Bruck] 5.4 2020 N/A N/A No
COLM [R. Burnison] 5.4 SP N/A N/A N/A No Spanish translation of 4th edition’s English version.
2nd Ed 5/98 Rfmd 5/15
4th Ed 6/16
2nd Ed 5/99 Errata 4/07 Rfmd 10/13
3rd Ed 4/09 Rfmd 6/14
SR3 for limited revision approved by COPM at June 2017 net meeting. WG ballot 4359 opened 5 Feb, closes 6 March 2018.
Introduction to Determination of the Volume of Displacement and Tank Provers
1st Ed 10/05 Rfmd 4/15
SR3 approved by COPM at Dec 2014 net meeting. WG ballot 4140 closed 6 July 2017. Resubmitted SR3 approved by COPM at Dec 2017 meeting. SC ballot 4341 opened 24 Jan, closes 6 March 2018.
Determination of the Volume of Displacement and Tank Provers by the Waterdraw Method of Calibration
1st Ed 12/05 Rfmd 5/15
Determination of the Volume of Displacement Provers by the Master Meter Method of Calibration
1st Ed 4/10 Rfmd 3/15
Determination of the Volume of Displacement and Tank Provers by the Gravimetric Method of Calibration
1st Ed 10/10 Errata 8/16 Rfmd 12/15
General Consideration for Measurement by Meters
4th Ed 9/05 Errata 6/08 Errata 6/11 Rfmd 7/16
Consideraciones Generales para la Medición con Medidores — Not a balloted standard
Measurement of Liquid Hydrocarbons by Displacement Meters
3rd Ed 9/05 Rfmd 7/15
Medición Sección 2 — Medición de Hidrocarburos Líquidos mediante Medidores de Desplazamiento — Not a balloted standard
Measurement of Liquid Hydrocarbons Turbine Meters
5th Ed 9/05 Rfmd 8/14
2019see
Addendum
SR3 for special solicitation for study approved by COPM Oct 2008. A modified SR3 was approved by COPM at the December 2009 net meeting. Resubmitted SR3 approved by COPM at Oct 2015 meeting. Results of study issued as TR 2578.
5.3Add
1st Ed 7/09 Rfmd 8/14
Addendum includes an updated Appendix to alert users to the problems with using straight pipe in lieu of a flow conditioner for turbine meters in liquid hydrocarbon service.
Medidores Sección 3 — Medición de Hidrocarburos Líquidos mediante Medidores de Turbina — Not a balloted standard
Accessory Equipment for Liquid Meters
4th Ed 9/05 Errata 5/15 Rfmd 8/15
Equipo Auxiliar para Medidores de Líquido — Not a balloted standard
4th Ed 9/05
API COPM Standardization Activities rev. 05/08/2023
05/08/2023 4
C/SC Ch./Std Chapter/Standard/Title Edition/Yr. Status/CommentsChairman or [contact]
Due for Action
Ballot Status
Current Ballot Type
SR3 Active
SR3 Approval Year
COLM [M. Bruck] 5.5 2020 N/A N/A No
COLM [R. Burnison] 5.5 SP N/A N/A N/A No Spanish translation of 2nd edition’s English version.
COLM G. Cotton 5.6 2018 WG Yes 2014 & 2016
COLM [R. Burnison] 5.6 SP N/A N/A N/A No Spanish translation of 1st edition’s English version.
Staff N/A N/A N/A N/A Ch. 5.7 withdrawn and replaced by Ch. 22.2.
COLM 5.8 2022 N/A N/A Yes 2017
COLM [R. Burnison] 5.8 SP 2nd Ed 11/11 N/A N/A N/A No
COLM Staff N/A N/A N/A No 2009
COLM [M. Lind] 6.1 2022 N/A N/A No
COLM 6.1A New Std N/A Reballot SC Yes 2011 & 2016
COLM [M. Lind] 6.2 Loading Rack Metering Systems 2021 N/A N/A No
COLM [R. Burnison] 6.2 SP 3rd Ed 2/04 N/A N/A N/A No Spanish translation of 3rd edition’s English version.
COLM 6.2A New Std N/A Open Ballot SC Yes 2011 & 2016
COLM Staff 6.3 N/A N/A N/A N/A (Do not reuse the Chapter number.)
COLM 6.3A New Std N/A Open Ballot SC Yes 2011 & 2016
Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems
2nd Ed 8/05 Rfmd 8/15
La Fidelidad y la Seguridad de los Sistemas de Transmisión de Pulsos/Datos de Medida de Flujo — Not a balloted standard
2nd Ed 8/05
Measurement of Liquid Hydrocarbons by Coriolis Meters
1st Ed 10/02 Rfmd 11/13
Comment Resolution
ANSI/API MPMS 5.6-2002. SR3 to revise standard approved by COPM at May 2014 net meeting. SR3 to revise scope approved by COPM at May 2016 net meeting. WG ballot closed 16 June 2016. PINS submitted to ANSI 2015-03-13.
Medición de los Hidrocarburos Líquidos Mediante Medidores Coriolis — Not a balloted standard
1st Ed 10/02
COGFM COLM
5.7See 22.2
Testing Protocols — Differential Pressure Flow Measuring Devices
Withdrawn 8/05
H. James J. Smith
Measurement of Liquid Hydrocarbons by Ultrasonic Flowmeters
2nd Ed 11/11 Errata 2/14 Rfmd 5/17
ANSI/API MPMS 5.8-2011. SR3 for revision approved by COPM at Dec 2017 net meeting.
Medición de los Hidrocarburos Líquidos mediante Medidores de Flujo Ultrasónicos — Not a balloted standard
Spanish translation of 2nd edition’s English version including the Errata 2/14.
Draft Standard
Vortex Shedding Flowmeters for Measurement of Hydrocarbon Fluids
Withdrawn Draft
Standard 1st Ed 1/07
Draft standard initially had a term of 3 years (term set by COPM May 2006). 3 year extension from Jan 2010 approved by COPM Oct 2009. Further 2 year extension approved by COPM Oct 2012. Agreed at Oct 2013 COPM meeting to allow draft standard to be withdrawn. SR3 for developing a standard for hydrocarbon fluids approved by COPM at May 2009 net meeting. Study results indicated that a TR should be issued initially with a view to eventually becoming an RP (see TR 2577). Vortex meters for gas flow measurement developed separately as Ch. 14.12.
Lease Automatic Custody Transfer (LACT) Systems
2nd Ed 5/91 Rfmd 12/17
PJF for revision submitted and approved by COLM and COPM March 2004. Superseded by the SR3 for the development of Ch. 6.1A. In the interim, reaffirmation ballot 4295 closed 30 Nov 2017. Ballot passed.
P. Chacon P. Ross
Liquid Flow Measurement Systems for Single Phase Liquids – General Considerations
SR3 approved by COPM at April 2011 net meeting. Ballot 3640 closed 18 September 2015. Resubmitted SR3 approved by COPM at Dec 2016 net meeting. Ballot 4039 closed 24 Feb 2017. Ballot 4338 opened 18 Jan 2018, closes 8 March 2018.
3rd Ed 2/04 Rfmd 7/16
Puentes de Medición para Sistemas de Carga — Not a balloted standard
T. Coffman M. Dudley
Truck and Rail Loading and Unloading Measurement Systems
SR3 approved by COPM at April 2011 net meeting. WG ballot closed 22 April 2016. Resubmitted SR3 approved by COPM at Dec 2016 net meeting. SC ballot 4339 opened 18 Jan, closes 8 March 2018.
Service Station Metered Fuel-Dispensing Systems
Withdrawn 9/00
L. James T. Philips
Pipeline and Marine Loading/Unloading Measurement Systems
SR3 approved by COPM at April 2011 net meeting. Resubmitted SR3 approved by COPM at Dec 2016 net meeting. Ballot 4340 opened 18 Jan, closes 8 March 2018.
API COPM Standardization Activities rev. 05/08/2023
05/08/2023 5
C/SC Ch./Std Chapter/Standard/Title Edition/Yr. Status/CommentsChairman or [contact]
Due for Action
Ballot Status
Current Ballot Type
SR3 Active
SR3 Approval Year
COLM Staff 6.4 N/A N/A N/A N/A
COLM [M. Lind] 6.5 2017 Reaffirmation No Reaffirmation ballot 4303 closed 29 Dec 2017.
COLM [M. Lind] 6.6 Pipeline Metering Systems 2022 N/A N/A No
COLM [M. Lind] 6.7 Metering Viscous Hydrocarbons Reaffirmation No
COMQ A. Brackett 7 Temperature Determination N/A N/A Yes 2005
COMQ [T. Patrick] 7.1 2nd Ed 8/17 2022 N/A N/A No
COMQ C. Skaug 7.2 New 3rd Ed N/A N/A N/A Yes 2005
COMQ [C. Skaug] 7.3 2021 N/A N/A No
COMQ [R. Burnison] 7.3 SP 2nd Ed 10/11 N/A N/A N/A No Spanish translation of 2nd edition's English version.
COMQ [T. Phillips] 7.4 2nd Ed 1/18 2023 N/A N/A No
COMQ (open) 7.5 1st Ed 9/14 2019 N/A N/A No Identical National Adoption of ISO 8310:2012.
COMQ [B. Moore] 8.1 4th Ed 10/13 2018 N/A N/A No
COMQ [R. Burnison] 8.1 SP 4th Ed 10/13 N/A N/A N/A No Spanish translation of 4th edition’s English version.
COMQ [B. Moore] 8.2 4th Ed 11/16 2021 N/A N/A No
COMQ G. Clark 8.3 2020 Open Ballot SC Yes 2015 & 2016
Metering Systems for Aviation Fueling Facilities
Withdrawn 5/16
Ballot 3574 proposing to withdraw the standard closed 10 June 2015. Unresolved negative recirculated with a deadline of 19 May 2016. 2nd Ed 1/07 withdrawn May 2016 and not superseded by another standard.
Metering Systems for Loading Marine Bulk Carriers
2nd Ed 5/91 Rfmd 5/12
Closed Ballot
2nd Ed 5/91 Rfmd 12/17
2nd Ed 5/91 Rfmd 5/12
(2017)2019
Closed Ballot
2-year extension approved by COPM at Dec 2017 net meeting. Reaffirmation ballot 4328 closed 16 Feb 2018.
1st Ed 6/01 Rfmd 2/12 Add 1 10/11
Add 2 8/17 Add
3 1/18
(2017)2019
Replaced previous editions of Chapters 7.1, 7.2, 7.3 and 7.4. Formerly had a joint designation with ASTM as D1086-64 (1982). ASTM designation discontinued in 1995. PJF approved by COPM April 2005. Additional SR3 to update/change scope rejected by COPM May 2006. Addendum 1 issued on the publication of 2nd Ed of Ch. 7.3 in order to withdraw sections 5.1, 5.5, 5.6, 6.1, 6.3, 8.1 and 9.1 of Ch. 7-2001. Addendum 2 issued on the publication of 2nd Ed of Ch. 7.1 in order to withdraw sections 5.3, 5.5, 5.6, 6.1, 6.5, and 8.3 of Ch. 7-2001. Addendum 3 issued on the publication of 2nd Ed of Ch. 7.4 to withdraw sections 5.5, 5.6, 7, 8.4 and 9.2. 2-year extension approved by COPM at March 2017 meeting.
Temperature Determination — Liquid-in-Glass Thermometers
Temperature Determination — Portable Electronic Thermometers (PETs)
Comments resolved on Ballot 4241 which closed 4 Oct 2017. Under publication.
Temperature Determination — Fixed Automatic Tank Temperature Systems
2nd Ed 10/11 Rfmd 12/16
Determinación de Temperatura — Sistemas Fijos de Medición Automática de Temperatura en Tanque — Not a balloted standard
Temperature Determination — Dynamic Temperature Measurement
Temperature Determination — Automatic Tank Temperature Measurement Onboard Marine Vessels Carrying Refrigerated Hydrocarbon & Chemical Gas Fluids
Manual Sampling of Petroleum and Petroleum Products (ASTM D4057)
Practica estándar para muestreo manual del Petróleo y Productos del Petróleo
Automatic Sampling of Petroleum and Petroleum Products (ASTM D4177)
Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products (ASTM D5854)
1st Ed 10/95 Errata 3/96 Rfmd 3/15
SR3 approved by COPM at Dec 2015 net meeting. ASTM Work Item (WK 52905) also created under D02.02. SR3 to further align standard with Ch. 8.2 approved by COPM at May 2016 net meeting. COMQ/ASTM D02.02 ballot (18-01) opened 14 Feb, closes 16 March 2018.
API COPM Standardization Activities rev. 05/08/2023
05/08/2023 6
C/SC Ch./Std Chapter/Standard/Title Edition/Yr. Status/CommentsChairman or [contact]
Due for Action
Ballot Status
Current Ballot Type
SR3 Active
SR3 Approval Year
COMQ [R. Burnison] 8.3 SP 1st Ed 10/95 N/A N/A N/A No Spanish translation of 1st edition’s English version.
COMQ 8.4 2022 N/A N/A No
COMQ [B. Moore] 8.5 1st Ed 12/15 2020 N/A N/A No
COMQ [R. Burnison] 8.5 SP 1st Ed 12/15 N/A N/A N/A No Spanish translation of 1st edition’s English version.
COMQ G. Potten 8.X New Std N/A N/A N/A Yes 2017
COMQ [P. Kosewicz] 9.1 2022 N/A N/A No
COMQ [P. Kosewicz] 9.2 2022 N/A N/A No
COMQ [P. Kosewicz] 9.3 2022 N/A N/A No
COMQ P. Kosewicz 9.4 1st Ed 1/18 2023 N/A N/A Yes 2012 & 2017
COMQ W. Schmidt 9.5 New Std N/A N/A N/A Yes 2017
COMQ [M. Osicki] 10.1 2022 N/A N/A No
COMQ [M. Osicki] 10.2 4th Ed 12/16 2021 N/A N/A No
COMQ [M. Osicki] 10.3 2021 N/A N/A No
COMQ [M. Osicki] 10.4 2018 N/A N/A No Errata published March 2015.
COMQ [M. Osicki] 10.5 5th Ed 9/13 2018 N/A N/A No
Procedimiento Estándar para la Mezcla y el Manejo de Muestras Liquidas de Petróleo y Productos de Petróleo — Not a balloted standard
[B. Moore P. Furman]
Sampling and Handling of Fuels for Volatility Measurement (ASTM D5842)
4th Ed 12/17
Manual Piston Cylinder Sampling of Volatile Crude Oils, Condensates and Liquid Petroleum Products (ASTM D8009)
Práctica Estándar para Muestreo de Cilindros de Pistón Manual para Productos de Petróleo Crudo Volátiles, Condensados y Productos Derivados del Petróleo Líquido
Continuous and Intermittent Sampling and Handling of Liquefied Natural Gas
SR3 for modified national adoption of ISO 8943:2007 approved by COPM at Dec 2017 net meeting.
Standard Test Method for Density, Relative Density (Specific Gravity) or API Gravity of Crude & Liquid Petroleum Products by Hydrometer Method (ASTM D1298)
3rd Ed 12/12 Rfmd 5/17
Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer (ASTM D1657)
3rd Ed 12/12 Rfmd 5/17
Standard Test Method for Density and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method (ASTM D6822)
3rd Ed 12/12 Rfmd 5/17
Continuous Density Measurement Under Dynamic (Flowing) Conditions
Supersedes Ch. 14.6 (COPM also agreed at Oct 2015 meeting that Ch. 9.4 will be the sole responsibility of COMQ). SR3 for research project approved by COPM June 2012. SR3 for continuing research project approved by COPM at June 2017 net meeting.
Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
SR3 to adopt ASTM D7777 approved by COPM at Dec 2017 net meeting.
Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method (ASTM D473)
3rd Ed 11/07 Rfmd 5/17
Determination of Water in Crude Oil by Distillation (ASTM D4006)
Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) (ASTM D4007)
4th Ed 8/13 Rfmd 5/16
Determination of Sediment and Water in Crude Oil by the Centrifuge Method (Field Procedure)
4th Ed 10/13 Errata 3/15
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation (ASTM D95)
API COPM Standardization Activities rev. 05/08/2023
05/08/2023 7
C/SC Ch./Std Chapter/Standard/Title Edition/Yr. Status/CommentsChairman or [contact]
Due for Action
Ballot Status
Current Ballot Type
SR3 Active
SR3 Approval Year
COMQ [M. Osicki] 10.6 2021 N/A N/A No
COMQ K. Nelson 10.7 Open Ballot SC Yes 2009
COMQ [M. Osicki] 10.8 2020 N/A N/A No
COMQ [M. Osicki] 10.9 3rd Ed 5/13 2018 N/A N/A No
COMQ [R. Burnison] 10.9 SP 3rd Ed 5/13 N/A N/A N/A No Spanish translation of 3rd edition’s English version.
COMQ H. James 10.XX New 1st Ed N/A N/A N/A Yes 2015
COMQ D. Embry 11.1 Open Ballot SC Yes 2012 & 2016
COMQ [D. Embry] Addendum to Ch. 11.1, 2nd Ed 1st Ed 9/07 N/A N/A N/A
COMQ Staff 11.1 N/A N/A N/A N/A Replaced with 2004 Ch. 11.1 products.
COMQ Staff 11.1 N/A N/A N/A N/A Replaced with 2004 Ch. 11.1 products.
COMQ Staff 11.1 N/A N/A N/A N/A Replaced with 2004 Ch. 11.1 products.
COMQ Staff 11.1 N/A N/A N/A N/A Replaced with 2009 Ch. 11.5 products.
COMQ Staff 11.1 N/A N/A N/A N/A Replaced with 2004 Ch. 11.1 products.
COMQ Staff 11.1 N/A N/A N/A N/A Replaced with 2004 Ch. 11.1 products.
COMQ Staff N/A N/A N/A N/A N/A Available from ASTM.
Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) (ASTM D1796)
5th Ed 8/13 Rfmd 5/16
Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration (ASTM D4377)
2nd Ed 12/02 Rfmd 5/11
(2016)2018
SR3 to revise and possibly incorporate into Ch. 10.9 rejected by COPM Dec 2007. At COMQ March 2008 meeting it was agreed to propose the standard for withdrawal when Ch. 10.9 has been revised. A new SR3 for revising the standard was approved by COPM at May 2009 net meeting. ASTM Ballot (13-04) for withdrawal closed Sept 2013. Those who objected to withdrawing the standard were requested to work on updating it. 2 year extension approved by COPM Oct 2017. COMQ/ASTM D02.02 ballot (18-01) opened 14 Feb, closes 16 March 2018.
Standard Test Method for Sediment in Crude Oil by Membrane Filtration (ASTM D4807)
2nd Ed 11/05 Rfmd 3/15
Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration (ASTM D4928)
Método Estándar de Prueba para Agua en Petróleo Crudo por Titulación Culombimétrica Karl Fischer — Not a balloted standard
On-Line Measurement of Water Content in Petroleum and Petroleum Products
SR3 approved by COPM at Dec 2015 net meeting. Document under development.
Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils
2nd Ed 5/04 Rfmd 8/12
(2017)2019
Formerly Std. 2540. Also an adjunct to ASTM D1250 and IP 200. Addendum issued Sept 2007 which necessitated modification to ASTM D1250 resulting a new edition published in 2007. SR3 to revise standard not approved by COPM at Dec 2011 net meeting. SR3 approved by COPM at Nov 2012 net meeting for revisions to be published as 2nd Addendum (but no changes that would change the calculated CTPL). Updated SR3 approved by COPM at Dec 2016 net meeting for revisions to be published as 2nd Addendum including removal of the implementation procedure (grandfather clause). 2-year extension approved by COPM at March 2017 meeting. Ballot 4346 on Addendum 2 opened 1 Feb, closes 8 March 2018.
11.1Add
2019 see above
Volume Correction Factors Volume I – IX
Historic [1980]
Addendum to Volume III/IX Volume Correction — MTBE
Historic [1980]
Volumetric Correction Factors, Volume X, Background, Development, Documentation
Historic [1980]
Volume Correction Factors Volume XI/XII (Intraconversion Tables)
Historic [1980]
Volume Correction Factors Volume XIII
Historic [1980]
Volume Correction Factors Volume XIV
Historic [1980]
ASTM/IP Petroleum Measurement Tables
Historic [1952]
API COPM Standardization Activities rev. 05/08/2023
05/08/2023 8
C/SC Ch./Std Chapter/Standard/Title Edition/Yr. Status/CommentsChairman or [contact]
Due for Action
Ballot Status
Current Ballot Type
SR3 Active
SR3 Approval Year
COMQ Staff 11.2 N/A N/A N/A N/A Replaced with 2004 Ch. 11.1 products.
COMQ Staff 11.2 N/A N/A N/A N/A Replaced with 2004 Ch. 11.1 products.
COMQ Staff 11.2.1 N/A N/A N/A N/A Replaced with 2004 Ch. 11.1 products.
COMQ Staff 11.2.1M N/A N/A N/A N/A Replaced with 2004 Ch. 11.1 products.
COMQ [D. Embry] 11.2.2 2022 N/A N/A N/A
COMQ [D. Embry] 11.2.2M 2022 N/A N/A N/A
COMQ Staff N/A N/A N/A N/A
COMQ Staff 11.2.3 N/A N/A N/A N/A 1st Ed 8/84 replaced by Ch. 11.4.1.
COMQ Staff 11.2.3M N/A N/A N/A N/A 1st Ed 8/84 replaced by Ch. 11.4.1.
COMQ D. Embry SC Yes 2015
COMQ [D. Embry] 2022 N/A N/A No
COMQ (open) 11.3.2.1 Ethylene Density 2nd Ed 5/13 2018 N/A N/A No
COMQ (open) 11.3.3.2 Propylene Compressibility 2022 N/A N/A No
COMQ D. Embry 11.3.3 2nd Ed 11/15 2020 Open Ballot SC Yes 2016
COMQ D. Embry 11.3.4 New 1st Ed N/A SC Yes
COMQ D. Embry 11.4.1 2018 N/A N/A Yes 2015
Computer Tape Information and Documentation for Chapters 11.2.1, 11.2.1M, 11.2.3, 11.2.3M
Historic [1984]
Computer Tape and Documentation of Chapters 11.2.2 and 11.2.2.M
Historic [1984]
Compressibility Factors for Hydrocarbons 0-90° API Gravity Range
Historic [1984]
Compressibility Factors for Hydrocarbons: 638-1074 Kilograms per Cubic Meter Range
Historic [1984]
Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60°F/60°F ) and –50°F to 140°F Metering Temperature
2nd Ed 10/86 Rfmd 9/17
Compressibility Factors for Hydrocarbons: 350-637 Kilograms per Cubic Meter Density (15°C) 46°C to 60°C Metering Temperature
1st Ed 10/86 Rfmd 9/17
11.2.2Add
Addendum to Correlation of Vapor Pressure Correlation for NGLs
Withdrawn 10/07
1st Edition of Addendum (1994) superseded by Ch. 11.2.5/GPA TP-15 in 2007.
Water Calibration of Volumetric Provers
Withdrawn 12/03
Water Calibration of Volumetric Provers
Withdrawn 12/03
11.2.4/GPA
TP-27
Temperature Correction for NGL & LPG – Tables 23E, 24E, 53E, 54E, 59E, 60E
1st Ed 9/07 Errata 9/11 Rfmd 10/12
(2017)2019
Closed Ballot
Supersedes API/ASTM/GPA TP-25. Errata published September 2011 stating that "11.2.4 does not supersede API MPMS Chapter 11.2.2/11.2.2M as currently stated in Section 0, page 1 of Chapter 11.2.4". SR3 for revision approved by COPM at May 2015 net meeting. 2-year extension approved by COPM at March 2017 meeting. Ballot 4243 closed 6 Oct 2017. Under publication.
11.2.5/GPA
TP-15
A Simplified Vapor Pressure Correlation for Commercial NGLs
1st Ed 9/07 Rfmd 9/17
Supersedes Ch. 11.2.2 Addendum. Reaffirmation ballot 4211 closed 8 September 2017. Ballot passed.
1974 Rfmd 10/17
Ballot 2241 proposing the standard be withdrawn closed Feb 2011. Ballot did not pass. WG formed to revise standard. In the interim, reaffirmation ballot 4245 closed 9 Oct 2017. Ballot passed.
Ethanol Density & Volume Correction Factor Tables
SR3 to develop an Addendum on ethanol compressibility approved by COPM at May 2016 net meeting. API Ballot 4363, open 8 Feb 2018, closes 8 March 2018.
Gasoline/Ethanol Volume Correction Factor Tables
Comment Resolution
2003, 2013, 2015, 2017
Original project proposal submitted Spring 2003. Updated project proposal submitted Spring 2005. Funded by a special solicitation 2006-2007. Phase I, II and III lab work and report on the analysis of data is complete. Further SR3s to develop TR for data and carry out additional work approved by COPM Dec 2013. SR3 for funding of TR approved by COPM at May 2015 net meeting. SR3 for scope change approved by COPM at June 2017 net meeting. Ballot 4196 closed 31 August 2017. Comments under review.
Density of Water and Water Volume Correction Factors for Calibration of Volumetric Provers
1st Ed 12/03 Errata 9/11
Rfmd 9/13
Supersedes Ch. 11.2.3 & Ch. 11.2.3M. Errata published September 2011 for a revision to Equation 4. SR3 for revision approved by COPM at March 2015 meeting. Ballot 3789 closed 1 April 2016. Ballot comments under review. Document recirculated with a deadline for responses of 16 Feb 2018. Under publication.
API COPM Standardization Activities rev. 05/08/2023
05/08/2023 9
C/SC Ch./Std Chapter/Standard/Title Edition/Yr. Status/CommentsChairman or [contact]
Due for Action
Ballot Status
Current Ballot Type
SR3 Active
SR3 Approval Year
COMQ [D. Embry] 11.5.1 2020 N/A N/A No Errata updated September 2013.
COMQ [D. Embry] 11.5.2 2020 N/A N/A No
COMQ [D. Embry] 11.5.3 2020 N/A N/A No
COLM [A. Kay] 1st Ed 8/07 N/A N/A N/A N/A Addendum addresses input/output values for calculations.
COLM C. Olson 12.1.1 SC Yes 2017
COLM [R. Burnison] 12.1.1 SP 3rd Ed 4/12 N/A N/A N/A No Spanish translation 3rd edition’s English version.
COLM [D. Blankers] 12.1.2 2nd Ed 2/18 2023 N/A N/A No See Ch. 17.6 for document numbering history.
COLM Staff 12.2 N/A N/A N/A No
COLM 12.2 New 2nd Ed N/A SC Yes
COLM 12.2.1 2019 N/A N/A Yes
Density/Weight/Volume Intraconversion Tables, Entry With API Gravity at 60°F
1st Ed 3/09 Errata 9/11 Rfmd 3/15
Density/Weight/Volume Intraconversion Tables, Entry With Relative Density at 60°F
1st Ed 3/09 Rfmd 3/15
Density/Weight/Volume Intraconversion Tables, Entry With Absolute Density at 15°C
1st Ed 3/09 Rfmd 3/15
12Add
Addendum to all Chapter 12 documents
Calculation of Static Petroleum Quantities — Part 1 — Upright Cylindrical and Marine Vessels
3rd Ed 4/12 Errata 5/15
(2017)2019
Comment Resolution
Published jointly with EI as HM 1.1. SR3 for limited revision approved by COPM at June 2017 net meeting. WG ballot 4257 closed 5 Oct 2017. 2 year extension approved by COPM Oct 2017. COLM ballot 4303 closed 5 Jan 2018.
Cálculo de Cantidades de PetróleoParte 1—Tanques Cilíndricos Verticales y de Buques — Not a balloted standard
Calculation Procedures for Tank Cars
Calculation of Petroleum Quantities Using Dynamic Measurement Methods
Withdrawn 10/09
Ballot (1754) for withdrawal of 1st edition (published 1981) closed July 2009. No negatives received and comments resolved. In addition, SR3 approved by COPM at Nov 2008 net meeting to revise Parts 1-5 and to amalgamate into one document (i.e. a new edition of Ch. 12.2). Furthermore, SR3 approved by COPM at Dec 2009 net meeting revising the scope of the proposed new amalgamated standard.
D. Comstock S. Tanner
Calculation of Petroleum Quantities Using Dynamic Measurement Methods & Volumetric Correction Factors
Comment Resolution
2008, 2009 & 2015
Modified SR3 to update Parts 1-5 (see below) and combine into a single document (i.e. a new edition of Ch. 12.2) approved by COPM at Nov 2008 net meeting. Also, SR3 approved by COPM at Dec 2009 net meeting revising the scope of the proposed new amalgamated standard. SR3 to only amalgamate Parts 1-3 into Ch. 12.2 (Parts 4 & 5 to move to new Ch. 12.4) approved by COPM at March 2015 meeting. Ballot 3588 closed 6 July 2015.
D. Comstock S. Tanner
Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volume Correction Factors — Part 1 — Introduction
2nd Ed 5/95 Errata 7/09 Rfmd 3/14
2008, 2009 & 2015
Ballot 310 on revision draft closed Oct 2003: ballot passed but comment resolution was required. Only the changes were balloted, the remainder of the document was for reference. The purpose was to harmonize Part 1 with Parts 3-5, which were developed some time after Parts 1 and 2 were completed. SR3 to initiate a new revision (to complement Ch. 11.1-2004) approved by COPM at May 2008 net meeting. Modified SR3 to update Parts 1-5 and combine into a single document (i.e. a new edition of Ch. 12.2) approved by COPM at Nov 2008 net meeting. Also, SR3 approved by COPM at Dec 2009 net meeting revising the scope of the proposed new amalgamated standard. SR3 to only amalgamate Parts 1-3 into Ch. 12.2 (Parts 4 & 5 to move to new Ch. 12.4) approved by COPM at May 2015 net meeting.
API COPM Standardization Activities rev. 05/08/2023
05/08/2023 10
C/SC Ch./Std Chapter/Standard/Title Edition/Yr. Status/CommentsChairman or [contact]
Due for Action
Ballot Status
Current Ballot Type
SR3 Active
SR3 Approval Year
COLM 12.2.2 2021 N/A N/A Yes
COLM 12.2.3 2019 N/A N/A Yes
COLM 12.2.4 2019 N/A N/A Yes
COLM [M. Desinger] 12.2.5 2021 N/A N/A Yes
COMQ (open) 12.3 2021 N/A N/A No
COLM J. Gallagher 12.4.1 New 1st Ed N/A N/A N/A Yes 2015 & 2017
COLM J. Gallagher 12.4.2 New 1st Ed N/A N/A N/A Yes 2015 & 2017
COLM J. Gallagher 12.4.3 New Std N/A N/A N/A Yes 2015 & 2017
COLM [M. Desinger] 13.1 N/A N/A N/A No
D. Comstock S. Tanner
Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volume Correction Factors — Part 2 — Measurement Tickets
3rd Ed 6/03 Rfmd 2/16
2008, 2009 & 2015
Ballot 311 on revision draft approved Oct 2003. Only the changes were balloted, to harmonize Part 2 with Parts 3-5, which were developed some time after Parts 1 and 2 were completed. SR3 to initiate a new revision (to complement Ch. 11.1-2004) approved by COPM at May 2008 net meeting. Modified SR3 to update Parts 1-5 and combine into a single document (i.e. a new edition of Ch. 12.2) approved by COPM at Nov 2008 net meeting. Also, SR3 approved by COPM at Dec 2009 net meeting revising the scope of the proposed new amalgamated standard. SR3 to only amalgamate Parts 1-3 into Ch. 12.2 (Parts 4 & 5 to move to new Ch. 12.4) approved by COPM at May 2015 net meeting.
D. Comstock S. Tanner
Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volume Correction Factors — Part 3 — Proving Reports
1st Ed 10/98 Rfmd 5/14
2008, 2009 & 2015
SR3 to initiate a revision (to complement Ch. 11.1-2004) approved by COPM at May 2008 net meeting. Modified SR3 to update Parts 1-5 and combine into a single document (i.e. a new edition of Ch. 12.2) approved by COPM at Nov 2008 net meeting. Also, SR3 approved by COPM at Dec 2009 net meeting revising the scope of the proposed new amalgamated standard. SR3 to only amalgamate Parts 1-3 into Ch. 12.2 (Parts 4 & 5 to move to new Ch. 12.4) approved by COPM at May 2015 net meeting.
D. Comstock S. Tanner
Calculation of Petroleum Quantities Using Dynamic Measurement Methods — Part 4 — Calculation of Base Prover Volumes by Waterdraw Method
1st Ed 12/97 Errata 7/09
Rfmd 9/14
2008, 2009 & 2015
SR3 to update Parts 1-5 and combine into a single document (i.e. a new edition of Ch. 12.2) approved by COPM at Nov 2008 net meeting. Also, SR3 approved by COPM at Dec 2009 net meeting revising the scope of the proposed new amalgamated standard. SR3 to only amalgamate Parts 1-3 into Ch. 12.2, and Parts 4 & 5 to move to new Ch. 12.4 approved by COPM at May 2015 net meeting.
Calculation of Petroleum Quantities Using Dynamic Measurement Methods — Part 5 — Calculation of Base Prover Volumes by Master Meter Method
1st Ed 9/01 Errata 7/09
Rfmd 8/16
2008, 2009 & 2015
SR3 approved by COPM at Dec 2007 net meeting. Modified SR3 to update Parts 1-5 and combine into a single document (i.e. a new edition of Ch. 12.2) approved by COPM at Nov 2008 net meeting. Also, SR3 approved by COPM at Dec 2009 net meeting revising the scope of the proposed new amalgamated standard. SR3 to only amalgamate Parts 1-3 into Ch. 12.2, and Parts 4 & 5 to move to new Ch. 12.4 approved by COPM at May 2015 net meeting. In the interim, reaffirmation ballot 3890 closed 1 August 2016. Ballot passed.
Calculation of Volumetric Shrinkage From Blending Light Hydrocarbons with Crude Oil
1st Ed 7/96 Rfmd 4/11
This Standard superseded and replaced Bulletin 2509C, 2nd Edition, 1967. Agreed at Oct 2015 meeting that standard be moved to stabilized maintenance (10 year reaffirmation cycle). Also agreed by COPM at March 2017 meeting that responsibility for standard would be transferred from COLM to COMQ, as the subject matter is aligned with that covered under Ch. 11 Physical Properties.
Calculation of Petroleum Quantities – Base Prover Volume Determination – Waterdraw Volumetric Method
Formerly Ch. 12.2.4. SR3 approved by COPM at May 2015 net meeting. SR3 for title and scope change approved by COPM at Dec 2017 net meeting.
Calculation of Petroleum Quantities – Base Prover Volume Determination – Master Meter Method
Formerly Ch. 12.2.5. SR3 approved by COPM at May 2015 net meeting. SR3 for title and scope change approved by COPM at Dec 2017 net meeting.
Calculation of Petroleum Quantities – Base Prover Volume Determination – Waterdraw Gravimetric Method
SR3 approved by COPM at March 2015 meeting. SR3 for title and scope change approved by COPM at Dec 2017 net meeting.
Statistical Concepts and Procedures in Measurement
Withdrawn 12/17
1st Ed 6/85 + Errata 7/13 (last Rfmd 3/16) withdrawn and incorporated into Ch. 13.3, 2nd Ed.
API COPM Standardization Activities rev. 05/08/2023
05/08/2023 11
C/SC Ch./Std Chapter/Standard/Title Edition/Yr. Status/CommentsChairman or [contact]
Due for Action
Ballot Status
Current Ballot Type
SR3 Active
SR3 Approval Year
COLM M. Desinger 13.2 2021 SC Yes 2016
COLM [M. Desinger] 13.3 Measurement Uncertainty 2nd Ed 12/17 2022 N/A N/A No
COGFM R. Carnahan 14.1 N/A N/A No
COGFM Staff 14.2 N/A N/A N/A No
COGFM Staff 14.2.1 N/A N/A N/A N/A AGA Report No. 8 Parts 1 & 2 published without API designation.
COGFM Staff 14.2.2 N/A N/A N/A N/A AGA Report No. 8 Parts 1 & 2 published without API designation.
COGFM [P. LaNasa] 14.3.1 2022 N/A N/A No
COGFM [J. Williams] 14.3.2 2021 N/A N/A No ANSI/API MPMS Ch. 14.3.2-2016.
COGFM [D. Sextro] 14.3.3 4th Ed 11/13 2018 N/A N/A No ANSI/API MPMS Ch. 14.3.3-2013.
COGFM M. Abens 14.3.4 Recirculation Yes 2006 & 2008
COGFM [D. Sextro] 14.4 2nd Ed 6/17 2022 N/A N/A No
COGFM [E. Lemmon] 14.5 2019 N/A N/A No
[P. Kosewicz] 14.6 Continuous Density Measurement N/A N/A N/A N/A
Statistical Methods of Evaluating Meter Proving Data
1st Ed 11/94 Errata 10/15
Rfmd 4/16
Closed Ballot
Assigned to COLM March 2007 by COPM Exec. Committee. Reaffirmation ballot 3786 closed 1 April 2016. Ballot passed. SR3 to revise standard and align with Ch. 13.3 approved by COPM at May 2016 net meeting. WG Ballot 4062 closed 9 March 2017. Ballot 4237 closed 29 Sept 2017.
Assigned to COLM March 2007 by COPM Exec Committee. 2nd Ed incorporates Ch. 13.1 into Ch. 13.3.
Collecting and Handling of Natural Gas Samples for Custody Transfer
7th Ed 5/16 Errata 8/17 Add 1 8/17
2022see
Addendum
SR3 to revise Section 12 only approved by COPM at Dec 2016 net meeting. Ballot 4119 on Addendum closed 1 June 2017. Addendum issued August 2017. Due for action date reflects publication date of Addendum.
Compressibility Factors of Natural Gas and other Related Hydrocarbon Gases (AGA Report No. 8/GPA 8185)
Withdrawn 4/17
2nd Ed 7/94 (Rfmd 2/12) replaced by AGA Report No. 8 Parts 1 and 2 published April 2017.
Calculating Thermodynamic Properties of Natural Gas and Other Related Hydrocarbon Gases Using DETAIL and GROSS Characterization Equations (AGA Report No.8 Part 1)
Project Withdrawn
2017
Calculating Thermodynamic Properties of Natural Gas and Other Related Hydrocarbon Gases Using GERG-2008 Equation (AGA Report No. 8 Part 2)
Project Withdrawn
2017
Concentric, Square-Edged Orifice Meters – General Equations and Uncertainty Guidelines (AGA Report No. 3 Part 1)
4th Ed 9/12 Errata 7/13 Rfmd 9/17
ANSI/API MPMS Ch. 14.3.1-2012. Reaffirmation ballot 4226 closed 21 Sept 2017. Ballot Passed.
Concentric, Square-Edged Orifice Meters – Specification and Installation Requirements (AGA Report No. 3 Part 2)
5th Ed 3/16 Errata 8/17
Concentric, Square-Edged Orifice Meters – Natural Gas Applications (AGA Report No. 3 Part 3)
Concentric, Square-Edged Orifice Meters – Background Development, Implementation Procedures and Subroutine Documentation (AGA Report No. 3 Part 4)
3rd Ed 11/92 Rfmd 8/11
(2016)2018
Closed Ballot
Under revision to include AGA errata and to reflect changes made to Ch. 14.3.1 (SR3 approved by COPM May 2006). Modified SR3 approved by COPM at Oct 2008 net meeting. WG ballot 3346 passed. SC ballot 3685 closed 30 Oct 2015. 2-year extension approved by COPM at March 2016 meeting. PINS submitted to ANSI 2007-07-05. Substantive changes recirculated with a deadline of 13 October 2016. Under publication.
Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumes (GPA 8173)
Published jointly with GPA as GPA Standard 8173. PINS submitted to ANSI 2007-07-05.
Calculation of Gross Heating Value, Specific Gravity and Compressibility of Natural Gas Mixture from Compositional Analysis (GPA 2172)
3rd Ed 1/09 Rfmd 2/14
Published jointly with GPA as GPA Standard 2172. Also approved as ANSI/API MPMS 14.5-2009. SR3 for revision approved by COPM at May 2014 net meeting. PINS for reaffirmation submitted to ANSI 2014-07-11. PINS for revision submitted to ANSI 2015-03-13. SR3 withdrawn Oct 2017.
COGFM COMQ
Withdrawn 1/18
2nd Ed 4/91 + Errata 8/98 (last Rfmd 2/12) withdrawn and superseded by Ch. 9.4.
API COPM Standardization Activities rev. 05/08/2023
05/08/2023 12
C/SC Ch./Std Chapter/Standard/Title Edition/Yr. Status/CommentsChairman or [contact]
Due for Action
Ballot Status
Current Ballot Type
SR3 Active
SR3 Approval Year
COGFM 14.7 5th Ed 2/18 2023 N/A N/A No Published jointly with GPA as GPA Standard 8182.
COGFM [K. Wilson] 14.8 N/A N/A N/A No Withdrawn and superseded by the revision of Ch. 14.7.
COGFM [A. Floyd] 14.9 2018 N/A N/A No
COGFM 14.10 Measurement of Flow to Flares SC Yes 2011 & 2016
COGFM [J. Lopera] 14.12 1st Ed 3/17 2022 N/A N/A No
COMQ [W. Schmidt] 15 2020 N/A N/A No
COMQ W. Schmidt 15.1 New 1st Ed N/A N/A N/A Yes 2016
COMQ W. Schmidt 15.2 New 1st Ed N/A N/A N/A Yes 2016
COLM (open) 16.2 2022 N/A N/A No
COMA [C. Mahaffey] 17.1 6th Ed 6/14 2019 N/A N/A No
COMA A. Reeves 17.2 N/A N/A Yes 2016
COMA [R. Burnison] 17.2 SP 2nd Ed 5/99 N/A N/A N/A No
COMA [T. Patrick] 17.3 2nd Ed 12/16 2021 N/A N/A No
COMA [R. Burnison] 17.3 SP 2nd Ed 12/16 N/A N/A N/A No Spanish translation of 2nd edition's English version.
COMA [D. Magouirk] 17.4 2nd Ed 9/16 2021 N/A N/A No
COMA [R. Burnison] 17.4 SP 2nd Ed 9/16 N/A N/A N/A No Spanish translation of 2nd edition's English version.
[E. Estrada K. Wilson]
Mass Measurement of Natural Gas Liquids and Other Hydrocarbons (GPA 8182)
Liquefied Petroleum Gas Measurement
Withdrawn 2/18
Measurement of Natural Gas by Coriolis Meter (AGA Report No. 11)
2nd Ed 2/13 Available from AGA
E. Estrada S. Masters
1st Ed 7/07 Rfmd 6/12
(2017)2019
Closed Ballot
SR3 for revision approved by COPM at April 2011 net meeting. Resubmitted SR3 approved by COPM at Dec 2016 net meeting. 2-year extension approved by COPM at March 2017 meeting. Ballot 4186 closed 22 August 2017.
Measurement of Gas by Vortex Meters
Guideline for the use of the International System of Units (SI) in the Petroleum and Allied Industries
3rd Ed 12/01 Rfmd 2/15
Document assigned to COMET Oct 2002 and then subsequently assigned to COMQ Oct 2012. Ballot 3339 for revision closed 1 Oct 2014. Revision work now superseded by development of Parts 1 & 2 of Ch. 15.
American National Standard for Metric Practice
SR3 to adopt/joint IEEE/ASTM SI 10 approved by COPM at May 2016 net meeting. It is proposed that new Parts 1 & 2 will eventually supersede Ch. 15, 3rd Ed, which will be withdrawn on their publication.
Guidelines for the Use of Petroleum Industry-Specific International System (SI) Units
SR3 to supplement the new Ch. 15.1 for petroleum industry specific metric terms that Ch. 15.1 does not cover approved by COPM at May 2016 net meeting. It is proposed that new Parts 1 & 2 will eventually supersede Ch. 15, 3rd Ed, which will be withdrawn on their publication. Ballot 4234 closed 29 Sept 2017. Ballot passed with editorial comments, which were resolved. Under publication.
Mass Measurement of Liquid Hydrocarbons in Vertical Cylindrical Storage Tanks by Hydrostatic Tank Gauging
1st Ed 11/94 Rfmd 9/17
Based on ISO 11223:1995 (which was superseded by ISO 11223:2002). Ch. 16.2 managed by Ch. 3 WG. Reaffirmation ballot 4224 closed 18 Sept 2017. Ballot Passed.
Guidelines for Marine Cargo Inspection
Measurement of Cargoes On Board Tank Vessels
2nd Ed 5/99 Errata 4/00 Rfmd 9/11
(2016)2018
2-year extension approved by COPM at March 2016 meeting. SR3 approved by COPM at May 2016 net meeting. Document under revision.
Medición de Cargas a Bordo de Buque Tanques — Not a balloted standard
Spanish translation of 2nd edition’s English version including Errata 4/00. Announced in Catalog 2007.
Guidelines for identification of the Source of Free Waters Associated with Marine Petroleum Cargo Movements
Directrices para la Identificación de Fuentes de Agua Libre Relacionadas con el Movimiento de Cargamentos Marítimos de Petróleo — Not a balloted standard
Method for Qualification of Small Volumes on Marine Vessels (OBQ/ROB)
Método para Cuantificación de Volúmenes Pequeños en Buques (OBQ/ROB) — Not a balloted standard
API COPM Standardization Activities rev. 05/08/2023
05/08/2023 13
C/SC Ch./Std Chapter/Standard/Title Edition/Yr. Status/CommentsChairman or [contact]
Due for Action
Ballot Status
Current Ballot Type
SR3 Active
SR3 Approval Year
COMA J. Koern 17.5 2022 N/A N/A Yes 2017
COMA [R. Burnison] 17.5 SP 3rd Ed 4/12 N/A N/A N/A No Spanish translation of 3rd edition’s English version.
COMA (open) 17.6 2nd Ed 6/14 2019 N/A N/A No
COMA Staff 17.7 N/A N/A N/A N/A
COMA [J. Hall] 17.8 2nd Ed 8/16 2021 N/A N/A No
COMA [R. Burnison] 17.8 SP 2nd Ed 8/16 N/A N/A N/A No Spanish translation of 2nd edition's English version.
COMA P. Burris 17.9 Vessel Experience Factors N/A N/A Yes 2016
COMA [R. Burnison] 17.9 SP 2nd Ed 5/12 N/A N/A N/A No Spanish translation of 2nd edition's English version.
COMA [B. Abugel] 17.10.1 1st Ed 2/14 2019 N/A N/A No Identical National Adoption of ISO 10976:2012.
COMA [B. Abugel] 17.10.2 2nd Ed 3/16 2021 N/A N/A No
COMA [B. Bourgeois] 17.11 2021 N/A N/A No
COMA [R. Burnison] 17.11 SP 2nd Ed 8/16 N/A N/A N/A No Spanish translation of 2nd edition's English version.
COMA (open) 17.12 2020 N/A N/A No Published jointly with EI as HM 51.
COMA [R. Burnison] 17.12 SP N/A N/A N/A No Spanish translation of 2nd edition's English version.
COMA J. Blair 17.14 N/A N/A N/A Yes 2014
COMA J. Blair 17.14.1 New Std N/A SC Yes 2016
Guidelines for Voyage Analysis and Reconciliation of Cargo Quantities
3rd Ed 4/12 Rfmd 6/17
Published jointly with EI as HM 64. SR3 for limited revision approved by COPM at Dec 2017 net meeting.
Guías para el Análisis y Reconciliación de Cantidades de Carga — Not a balloted standard
Guidelines for Determining Fullness of Pipelines Between Vessels and Shore Tanks
Agreed in March 1999 for removal of the (then) Ch. 12.1.2 from the COLM work program so that the work was passed to COMA to be incorporated into Ch. 17.6 as part of their document since the text for the calculation was only one page. Ch. 12.1.3 Tank Cars, which was under development at that time, subsequently became Ch. 12.1.2.
Recommended Practices for Developing Barge Control Factors (Volume Ratio)
Withdrawn 2/16
1st Ed 9/95. Ballot 3754 proposing withdrawal closed 16 Feb 2016. No objections received and standard withdrawn.
Guidelines for Pre-Loading Inspection of Marine Vessel Cargo Tanks and Their Cargo-handling Systems
Directrices para la Inspección Previa a la Carga de Tanques de Carga del Buque y sus Sistemas de Manipulación de Cargamentos — Not a balloted standard
2nd Ed 5/12 Add 1 1/14
2019see
Addendum
Published jointly with EI as HM 49. SR3 for revision approved by COPM at May 2016 net meeting. SR3 for scope change approved by COPM at Dec 2017 net meeting. Due for action date reflects publication date of Addendum.
Factor de Experience del Buque (VEF) — Not a balloted standard
Measurement of Cargoes on board marine gas carriers Part 1: LNG
Measurement of Refrigerated and/or Pressurized Cargoes on Board Marine Gas Carriers Part 2: Liquefied petroleum and chemical gases
Measurement and Sampling of Cargoes On Board Tank Vessels Using Closed/Restricted Equipment
2nd Ed 8/16 Errata 3/17
Published jointly with EI as HM 52. Errata for clarification to the note in Section 7.1.3 was issued March 2017.
Medición y Muestreo de Cargamentos a Bordo de Buque tanques con Equipo Cerrado o Restringido
Procedures for Bulk Liquid Chemical Cargo Measurement by Cargo Inspections
2nd Ed 9/15
Procedimientos para inspecciones de cargamentos de productos químicos líquidos a granel
2nd Ed 9/15
Measurement of Bulk Cargoes by Draft Survey
SR3 approved by COPM at May 2014 net meeting. SR3s subsequently approved by COPM at Dec 2016 net meeting to split project into 2 parts. See Ch. 17.14.1 and Ch. 17.14.2.
Measurement of Bulk Cargoes by Draft Survey Part 1: Ocean-Going Vessels
Comment Resolution
SR3 approved by COPM at Dec 2016 meeting. Ballot 4144 closed 1 August 2017. Comments being resolved
API COPM Standardization Activities rev. 05/08/2023
05/08/2023 14
C/SC Ch./Std Chapter/Standard/Title Edition/Yr. Status/CommentsChairman or [contact]
Due for Action
Ballot Status
Current Ballot Type
SR3 Active
SR3 Approval Year
COMA J. Blair 17.14.2 New Std N/A SC Yes 2016
D. Weidig 18.1 N/A N/A Yes 2012 & 2014
[M. Vandiver] 18.2 1st Ed 7/16 2021 N/A N/A No
CELE (open) 19.1 5th Ed 6/17 2022 N/A N/A No Previously API Publication 2518.
CELE Staff 19.1A N/A N/A N/A N/A 1st Ed 3/62. Previously API Bulletin 2516.
CELE Staff 19.1D N/A N/A N/A N/A
CELE 19.2 3rd Ed 10/12 N/A N/A Yes 2017
CELE (open) 2022 N/A N/A No
CELE (open) 2022 N/A N/A No
CELE (open) 2023 N/A N/A No
CELE (open) 2017 Open Ballot Reaffirmation No Reaffirmation ballot 4364 closes on 8 March 2018.
CELE (open) 2022 N/A N/A No
CELE Staff N/A N/A N/A N/A
CELE Staff N/A N/A N/A N/A
CELE 2021 N/A N/A Yes 2008 & 2015
CELE (open) 19.4 N/A N/A No Due for action date reflects publication date of 2nd Addendum.
Measurement of Bulk Cargoes by Draft Survey Part 2: Inland Barges
Comment Resolution
SR3 approved by COPM at Dec 2016 meeting. Ballot 4145 closed 1 August 2017. Comments being resolved
COMQ COLM
Measurement Procedures for Crude Oil Gathered From Small Tanks by Truck
2nd Ed 4/97 Rfmd 2/12
(2017)2019
Agreed at Oct 2010 COPM meeting that responsibility for standard will be shared jointly between COLM and COMQ. SR3 for revision approved by COPM at Nov 2012 net meeting. Modified SR3 to update scope approved by COPM at May 2014 net meeting. Ballot 3713 (joint COMQ-COLM ballot) closed 30 Nov 2015. Reballot 4026 closed 28 Feb 2017. Substantive changes from ballot recirculated with a deadline of 15 Sept 2017. Under publication. 2-year extension approved by COPM at March 2017 meeting.
COMQ COLM
Custody Transfer of Crude Oil from Lease Tanks Using Alternate Measurement Methods
Evaporative Loss From Fixed-Roof Tanks
Evaporative Loss From Low Pressure Tanks
Withdrawn 9/11
Documentation File for API MPMS Ch. 19.1 — Evaporative Loss from Fixed Roof Tanks
1st Ed 3/93 Errata 6/94
Previously API Bulletin 2518. As this is a documentation file, 5 year review is not required.
S. Ananthakrishna
Evaporative Loss From Floating-Roof Tanks
(2017)2019
Previously API Publications 2519 and 2517. 2-year extension approved by COPM at March 2017 meeting. SR3 approved by COPM at June 2017 net meeting. Document under revision.
19.3 Part A
Wind Tunnel Test method Deck — Fitting Loss Factors for External Floating-Roof Tanks
1st Ed 6/97 Rfmd 9/17
19.3 Part B
Air Concentration Test Method — Rim Seal Loss Factors for Floating Roof Tanks
1st Ed 8/97 Rfmd 9/17
19.3 Part C
Weight Loss Test Method for the Measurement of Rim-Seal Loss Factors for Internal Floating-Roof Tanks
1st Ed 7/98 Rfmd 01/18
19.3 Part D
Fugitive Emission Test Method for Measurement of Deck-Seam Loss Factors for Internal Floating-Roof Tanks
1st Ed 6/01 Rfmd 12/12
19.3 Part E
Weight Loss Test Method for the Measurement of Deck-Fitting Loss Factors for Internal Floating-Roof Tanks
1st Ed 5/97 Rfmd 10/17
19.3 Part F
Evaporative Loss Factor for Storage Tanks Certification Program
Withdrawn 12/09
1st Ed 3/97. Relevant sections are being incorporated into the revision of Ch. 19.3 Part H.
19.3 Part G
Certified Loss Factor Testing Laboratory Registration
Withdrawn 12/09
1st Ed 3/97. Relevant sections are being incorporated into the revision of Ch. 19.3 Part H.
S. Ananthakrishna
19.3 Part H
Tank Seals and Fittings Certification — Administration
1st Ed 3/98 Rfmd 8/16
SR3 to revise rejected by COPM Dec 2007. Revised SR3 approved by COPM with modifications at May 2008 net meeting. Revision is incorporating the relevant sections of Parts F and G. Resubmitted SR3 approved by COPM at Oct 2015 meeting.
Evaporative Loss Reference Information and Speciation Methodology
3rd Ed 10/12 Add 1 11/13 Add 2 6/17
2022see Add 2
API COPM Standardization Activities rev. 05/08/2023
05/08/2023 15
C/SC Ch./Std Chapter/Standard/Title Edition/Yr. Status/CommentsChairman or [contact]
Due for Action
Ballot Status
Current Ballot Type
SR3 Active
SR3 Approval Year
CELE (open) 19.5 2019 N/A N/A No
CELE (open) 1st Ed 2/17 2022 N/A N/A No Formerly TR 2567.
CPMA [A. Kurian] 20.1 Allocation Measurement 2021 N/A N/A No
CPMA A. Kurian 20.1 New 2nd Ed N/A N/A N/A Yes
CPMA [C. Simonton] 20.2 1st Ed 11/16 2021 N/A N/A No
CPMA P. Chacon 20.3 Measurement of Multiphase Flow 1st Ed 1/13 2018 N/A N/A Yes 2016 SR3 for revision approved by COPM at Dec 2016 net meeting.
CPMA [M. Zimmerman] 1st Ed 8/16 2018 N/A N/A No
CPMA [D. Cutting] 20.5 1st Ed 12/17 2022 N/A N/A N/A
CPMA [R. Webb] [20.6] N/A N/A N/A N/A N/A
COGFM 21.1 2nd Ed 2/13 2018 SC Yes 2015 & 2016
COLM R. Fallwell 21.2 2021 N/A N/A Yes 2016
COLM R. Fallwell 2021 N/A N/A Yes 2016
COGFM D. George 22.1 2020 Open Ballot SC Yes 2016
Atmospheric Hydrocarbon Emissions from Marine Vessel Transfer Operations
1st Ed 9/09 Rfmd 10/14
Previously API Publication 2514A.Published jointly with EI as HM 65.
19.6 Part 1
Evaporative Loss from Storage Tank Floating Roof Landings
1st Ed 9/93 Add 1 1/13 Add 2 11/16 Rfmd 10/16
Responsibility transferred from COLM to CPMA Fall 2007. Will eventually be incorporated into other Ch. 20 standards under development. Phase Boundary Reference Data - PJF approved by COPM April 2005. Report for Phase I presented to WG in Oct 2006. Report for Phase I presented to CPMA at Oct 2007 meeting. Phase II not being progressed at this time. Addenda 1, 2 and 3 issued on the publication of Ch. 20.3 Ch. 20.2 and Ch. 20.5, respectively, specifying which sections of Ch. 20.1-1993 are superseded by the new standards.
Production Measurement and Allocation Systems
2010, 2012, 2013, 2017
SR3 approved by COPM at April 2010 net meeting. New Ch. 20.1 to be an introductory document with pointers to the other parts of Ch. 20 currently under development. SR3 approved by COPM at June 2012 net meeting to update scope and incorporate the allocation portion formerly being developed as Ch. 20.6. WG ballot 3970 closed 4 October 2016. SR3 for title and scope change approved by COPM at June 2017 net meeting. WG ballot 4272 closed 6 Oct 2017.
Production Allocation Measurement Using Single Phase Devices
Draft Standard
[20.4]
Application of Hydrocarbon Phase Behavior Modeling in Upstream Measurement and Allocation Systems
Recommended Practice for Application of Production Well Testing in Measurement and Allocation
Recommended Practice for Production Allocation of Commingled Production Quantities
SR3 approved by COPM at Dec 2007 net meeting. Originally worked jointly with EI HMC-7, but then decided separate document would be developed (revised SR3 approved by COPM May 2010). SR3 approved by COPM at June 2012 net meeting to update scope of Ch. 20.1 and incorporate the allocation portion formerly being developed as Ch. 20.6.
C. Hodges T. Shah
Electronic Gas Measurement(AGA Report No. 13)
Comment Resolution
ANSI/API MPMS Chapter 21.1-2013. SR3 for research approved by COPM at May 2015 net meeting. SR3 to revise limited sections of the standard approved by COPM at May 2016 net meeting. Ballot 3876 closed 15 June 2016.
Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters
1st Ed 6/98 Rfmd 10/16
Reaffirmation ballot 3898 closed 12 Aug 2016. Ballot passed. SR3 for revision approved by COPM at Dec 2016 net meeting.
21.2Add
Flow Measurement Using Electronic Metering Systems, Inferred Mass
1st Ed 8/00 Rfmd 10/16
This document will be incorporated into Ch. 21.2 when it is revised. Included in reaffirmation ballot 3898 which closed 12 Aug 2016. Ballot passed.
Testing Protocols — General Guidelines for Developing Testing Protocols for Devices Used in the Measurement of Hydrocarbon Fluids
2nd Ed 8/15
ANSI/API MPMS Ch. 22.1-2015. SR3 to develop an annex on type testing approved by COPM at Dec 2016 net meeting. WG ballot 4210 on annex closed 28 August 2017. COLM ballot 4342 on annex opened 25 Jan, closes 7 March 2018.
API COPM Standardization Activities rev. 05/08/2023
05/08/2023 16
C/SC Ch./Std Chapter/Standard/Title Edition/Yr. Status/CommentsChairman or [contact]
Due for Action
Ballot Status
Current Ballot Type
SR3 Active
SR3 Approval Year
COGFM 22.2 2nd Ed 4/17 2022 N/A N/A No Replaces Ch. 5.7. PINS submitted to ANSI 2007-07-05.
COGFM [E. Estrada] 22.3 1st Ed 8/15 2020 N/A N/A No ANSI/API MPMS Ch. 22.3-2015
COGFM 22.4 New Std N/A Recirculation Yes 2005 & 2011
COGFM 22.5 New Std N/A Reballot WG Yes 2007 & 2016
COGFM [D. George] 22.6 1st Ed 8/15 2020 N/A N/A No
COMA 23.1 1st Ed 6/16 2021 N/A N/A No Supersedes Std 2560, 1st Ed 12/03, which is withdrawn.
COMA P. Genre 23.2 New Std N/A N/A N/A Yes 2016 & 2017
CELE (open) Pub 2524 N/A N/A N/A No
COLM (open) Std 2552 N/A N/A No
COLM (open) Std 2554 SC Yes 2013
COLM (open) Std 2555 Liquid Calibration of Tanks 2019 N/A N/A No
COLM (open) RP 2556 2018 N/A N/A No
CELE (open) Pub 2558 N/A N/A N/A No
COMA Staff Std 2560 N/A N/A N/A N/A 1st Ed 12/03 superseded by Ch. 23.1, 1st Ed.
CPMA [D. Courtney] Pub 2566 1st Ed 5/04 N/A N/A N/A No
CELE (open) TR 2567 N/A N/A N/A N/A 1st Ed 4/05 superseded by Ch. 19.6 Part 1, 1st Ed.
CELE TR 2568 1st Ed 11/07 N/A N/A N/A Yes 2011
[A. Mathews R. Estabrook]
Testing Protocols — Differential Pressure Flow Measuring Devices
Testing Protocols — Flare Gas Meters
C. Hodges J. Merkins
Testing Protocol for Pressure, Differential Pressure, and Temperature Measuring Devices
Closed Ballot
SR3 approved Dec 2005. PINS submitted to ANSI 2007-07-05. Name change approved (with appropriate liaison with Ch. 13.3, measurement uncertainty) by COPM May 2006. SR3 to update scope approved by COPM April 2011. WG ballot 3219 closed 25 April 2014. SC ballot 3529 closed 1 May 2015. Reballot 3718 closed 1 Dec 2015. Substantive changes recirculated with a deadline of 13 October 2016. Under publication.
C. Hodges J. Merkins
Testing Protocol for Flow Computer Calculations
SR3 approved with modifications at COPM May 2007 net meeting. SR3 re-approved by COPM at Dec 2007 net meeting due to edits made. PINS submitted to ANSI 2007-07-05. SR3 resubmitted (with title change) and approved by COPM at May 2016 net meeting. WG ballot opened 6 Feb, closes 6 March 2018.
Testing Protocol for Gas Chromatographs
[J. Upton I. Batytskiy]
Reconciliation of Liquid Pipeline Quantities
Reconciliation of Liquid Tank Car(s) Quantities
SR3 approved by COPM at May 2016 net meeting. SR3 for scope change approved by COPM at June 2017 net meeting. Document under development.
Impact Assessment of New Data on Validity of American Petroleum Institute Marine Transfer Operation Emission Factors
1st Ed 7/92
As this is a publication (which should have been designated a Technical Report), 5 year review is not required.
Measurement and Calibration of Spheres and Spheroids
1st Ed 10/66 Rfmd 9/12
(2017)2019
2-year extension approved by COPM at Dec 2017 net meeting. Formerly had a joint designation with ASTM as D1408-65 (1990). ASTM designation discontinued in 1995.
Measurement and Calibration of Tank Cars
1st Ed 10/66 Rfmd 9/12
(2017)2019
Closed Ballot
Formerly had a joint designation with ASTM as D1409-65 (1990). ASTM designation discontinued in 1995. SR3 to revised standard approved by COPM at Dec 2013 net meeting. Ballot 4253 closed 13 Oct 2017. 2-year extension approved by COPM at Dec 2017 net meeting.
1st Ed 9/66 Rfmd 5/14
Formerly had a joint designation with ASTM as D1406-65 (1990). ASTM designation discontinued in 1995.
Correcting Gauge Tables for Incrustation
2nd Ed 8/93 Rfmd 11/13
Wind Tunnel Testing of External Floating-Roof Storage Tanks
1st Ed 6/93
As this is a publication (which should have been designated a Technical Report), 5 year review is not required.
Reconciliation of Liquid Pipeline Quantities
Withdrawn 6/16
State of the Art Multiphase Flow Metering
As this is a white paper made available as an API Publication, 5 year review is not required. Agreed by COPM at Oct 2008 meeting to transfer from COLM to CPMA.
Evaporative Loss from Storage Tank Floating Roof Landings
Withdrawn 2/17
S. Ananthakrishna
Evaporative Loss from the Cleaning of Storage Tanks
As this is a technical report, 5 year review is not required. SR3 to incorporate study on reduction of degassing emissions by use of distillate absorption approved by COPM at Oct 2011 meeting. TR also being re-formatted as a standard to be balloted and then published as Chapter 19.6, Part 2. Draft revision is being circulated to CELE before ballot.
API COPM Standardization Activities rev. 05/08/2023
05/08/2023 17
C/SC Ch./Std Chapter/Standard/Title Edition/Yr. Status/CommentsChairman or [contact]
Due for Action
Ballot Status
Current Ballot Type
SR3 Active
SR3 Approval Year
CELE (open) TR 2569 1st Ed 8/08 N/A N/A N/A No
COMQ (open) TR 2570 2021 N/A N/A No
COGFM S. Phillips TR 2571 Fuel Gas Measurement 1st Ed 3/11 N/A Open Ballot WG Yes 2015
COPM (open) TR 2572 1st Ed 5/13 2018 N/A N/A No
COMQ [K. Nelson] TR 2573 1st Ed 9/13 2018 N/A N/A No
CELE (open) TR 2574 1st Ed 8/16 N/A N/A N/A N/A Study carried out for Ch. 19.5 published as an API Technical Report.
COGFM [N. Englade] TR 2575 Thermally Cracked Gas 1st Ed 9/14 N/A N/A N/A No
CELE (open) TR 2576 1st Ed 7/16 N/A N/A N/A No
COLM J. Lopera TR 2577 New TR N/A SC Yes 2015
COLM [M. Bruck] TR 2578 1st Ed 10/17 N/A N/A N/A No
COPM W. Schmidt TR 25XX New TR N/A N/A N/A Yes 2016 SR3 approved by COPM at Dec 2016 net meeting.
CPMA [D. Courtney] RP 85 2018 N/A N/A No
CPMA Staff RP 86 N/A N/A N/A N/A
CPMA [D. Courtney] RP 87 2022 N/A N/A No
COLM [K. Elliot] White Paper Manufactured Meter Pulse N/A N/A N/A No Agreed at March 2009 COLM meeting to issue as a white paper.
COGFM T. Glazebrook White Paper N/A SC No
Evaporative Loss from Closed-Vent Internal Floating-Roof Storage Tanks
As this is a technical report, 5 year review is not required. Document will be re-formatted to become Chapter 19.6, Part 3.
Continuous On-Line Measurement of Water Content in Petroleum (Crude Oil and Condensate)
1st Ed 10/10 Rfmd 1/16
Published jointly with EI as HM 56. Previous API Draft standard withdrawn in 2003. See also Ch. 10.XX.
SR3 for revision and to transpose into a Recommended Practice and reassign from COPM to COGFM approved by COPM at May 2015 net meeting. WG ballot opened 5 Feb, closes 6 March 2018.
Carbon Content, Sampling, & Calculation
Guide for Sediment & Water Determination in Crude Oil (ASTM Guide D7829)
Field Testing Protocol for Characterization of Total Hydrocarbons, Methane, Ethane in Air-vapor Mixture During Filling of a Cargo Vessel With Crude Oil
Funding for Phase 1 of study approved by COPM in 2004. SR3 for Phase 2 of study approved with modifications by COPM May 2006. SR3 for further funding of Phase 2 study approved by COPM May 2007. SR3 for Phase 3 of study approved by COPM April 2010. Study results for Phases 1 and 2 issued as API TR.
Short Term Evaporative Loss Estimation from Atmospheric Storage Tanks
Measurement of Liquid Hydrocarbons by Vortex Meters
Closed Ballot
SR3 for developing a standard for hydrocarbon fluids approved by COPM at May 2009 net meeting (see Draft Standard [5.9]). Study results indicated that a TR should be issued initially with a view to eventually becoming an RP. SR3 for TR approved by COPM at Dec 2015 net meeting. Comment only ballot 4063 closed on 3 March 2017. Under publication.
Flow Conditioner Installation and Effects on Turbine Meters
Liquid Hydrocarbon Measurement Uncertainty Calculations
Use of Subsea Wet-gas Flowmeters in Allocation Measurement Systems
1st Ed 3/03 Add 1 1/13 Rfmd 10/13
Transferred to CPMA from UATG in 2007. Addendum 1 issued on the publication of Ch. 20.3 specifying which sections of RP 85 are superseded by Ch. 20.3. Will be transferred to CSOEM 17S TG once revision of Ch. 20.1 is complete.
RP for Measurement of Multiphase Flow
Withdrawn 1/13
1st Ed 9/05 transferred to CPMA from UATG in 2007. Withdrawn because incorporated into and superseded by Ch. 20.3.
RP for Field Analysis of Crude Oil Samples Containing from 2 to 50% Water by Volume
1st Ed 8/07 Rfmd 10/17
Transferred to CPMA from UATG in 2007. Following reaffirmation ballot in 2017, TG will be established to review document to consider updating.
Electronic Flow Measurement Using Wireless Communication Technology
Closed Ballot
Agreed at Oct 2011 COGFM meeting to issue a white paper on topic. Ballot 3345 (closed Oct 2014) passed. Under publication.
05/08/2023 18
Title Edition/Yr. Comments
Shop Testing of Automatic Liquid-Level Gauges Replaced by Ch. 3.1B.
Replaced by Ch. 12.3.
Feb 1959
Replaced by Ch. 19.5.
Evaporation Loss from Low-Pressure Tanks Renumbered as Ch. 19.1A.
Evaporative Loss from Floating-Roof Tanks Replaced and incorporated into Ch. 19.2.
Evaporation Loss From Fixed-Roof Tanks Replaced and incorporated into Ch. 19.1.
API Publication 2518 Documentation File Renumbered as Ch. 19.1D.
Nov 1962 Replaced and incorporated into Ch. 19.2.
Sept 1964
Use of Pressure-Vacuum Valves for Atmospheric Loss
Jan 1967
API 2000 Series Standards [Historical]
Std/Pub/BullStd 1101
Measurement of Petroleum Liquid Hydrocarbons by Positive Displacement Meter
Withdrawn 1987
Renumbered as Ch. 5.2. Table II of Appendix B of Std 1101-1960 was replaced by Ch. 11.2.1-1984.
Std 2509B
Withdrawn 2000
Bull 2509C
Volumetric Shrinkage Resulting From Blending Volatile Hydrocarbons With Crude Oils
Withdrawn 1996
Bull 2513
Evaporation Loss in the Petroleum Industry―Causes and Control
Pub 2514A
Atmospheric Hydrocarbon Emissions from Marine Vessel Transfer Operations
Withdrawn 2009
Bull 2516
Withdrawn 2000
Bull 2517
Feb 1962 Withdrawn
4/97
Pub 2518
June 1962 Withdrawn
3/93
Bull 2518D
Withdrawn 1993
Bull 2519
Use of Internal Floating Covers for Fixed-Roof Tanks to Reduce Evaporation Loss
Bull 2519D
Documentation File for API Bulletin 2519, Evaporative Loss from Internal Floating-Roof Tanks
Withdrawn 4/97
Bull 2520
Use of Variable-Vapor-Space Systems to Reduce Evaporation Loss
Bull 2521
Withdrawn 3/01
Bull 2522
Comparative Methods for Evaluating Conservation Mechanisms for Evaoration Loss
05/08/2023 19
Title Edition/Yr. Comments
API 2000 Series Standards [Historical]
Std/Pub/Bull
3rd Ed 1975 Replaced by Ch. 14.1.
Orifice Metering of Natural Gas Replaced by Ch. 14.3.
Mechanical Displacement Meter Provers Along with RP 2533 and Std 2534, replaced by Ch. 4.1.
Recommended Practice for Metering Viscous Hydrocarbons Along with Std 2531 and Std 2534, replaced by Ch. 4.1.
Along with Std 2531 and RP 2533, replaced by Ch. 4.1.
Volume Correction Factors
23894 Renumbered as Ch. 7
Method of Gauging Petroleum and Petroleum Products Replaced by Ch. 3.4.
Replaced by Ch. 10.3 and Ch. 10.6
Measurement and Calibration of Upright Cylindrical Tanks Replaced by Ch. 2.2A and Ch. 2.2B.
Method for Measurement and Calibration of Barges Replaced by Ch. 2.7 and Ch. 2.8A.
Pub 2525
Review of Air Toxics Emission Calculation from Storage Tanks
Withdrawn 3/01
Pub 2529
Measuring, Sampling, Testing and Base Conditions for Natural Gas Fluids
Std 2530
2nd Ed 1978 Historical
Std 2531
Withdrawn 1978
RP 2533
Withdrawn 1978
Std 2534
Measurement of Liquid Hydrocarbons by Turbine Meter Systems
Withdrawn 1978
Std 2540
Withdrawn 2004
Replaced by Ch. 11.1 (Ch. 11.1-1980 also had the designation Std 2540).
Std 2543
Method of Measuring the Temperature of Petroleum and Petroleum Products
Std 2545
Withdrawn 1995
Std 2548
Standard Method of Test for Water and Sediment in Crude oils and Fuel Oils by Centrifuge
Withdrawn 1983
Std 2550
Withdrawn 1995
Std 2551
Standard Method for Measurement and Calibration of Horizontal Tanks
Withdrawn 4/04
Incorporated into Chapters 2.2E and 2.2F, the National Adoptions of ISO 12917-1 and 12917-2. Formerly had a joint designation with ASTM as D1410-65 (1990). ASTM designation discontinued in 1995.
Std 2553
Withdrawn 1991
Pub 2557
Vapor Collection & Control Options for Storage & Transfer Operations in the Petroleum Industry
Withdrawn 3/01
05/08/2023 20
Title Edition/Yr. Comments
API 2000 Series Standards [Historical]
Std/Pub/Bull
1968 Replaced by Ch. 10.5.
1966 Replaced by Ch. 10.1.
1st Ed Nov 69
Metric Practice Guide Replaced by Ch. 15.
Replaced by Ch. 15.
Ethylene Density Measurement Manual Renumbered as Ch. 11.3.2.1.
Std 2560
Standard Method of Test for Water in Petroleum and Other Bituminous Materials
Std 2561
Standard Method of Test for Sediment in Crude and Fuel Oils by Extraction
Std 2562
Base Conditions of Pressure and Temperature for the Volumetric Measurement of Natural Gas
Pub 2563
Withdrawn 1976
Pub 2564
Conversion of Operational and Process Measurement Units to the Metric (SI) System
Withdrawn 1973
Std 2565
Withdrawn 1974