FieldPoint Primer

www.natinst.comwww.natinst.com

FieldPoint Primer

Eloisa Acha

Automation Applications Engineer

Tue. 10:15a and 11:15a

Wed. 10:15a, 11:30a, 12:45p, 2:00p, 3:30p, and 4:45p

Exhibit Hall (3F)


FieldPoint – Distributed I/OFieldPoint – Distributed I/O

NN NNControl Panel

Flow

Pressure Alarm Conditions

STOP

Temperature

Industrial Network

NN NN NN NN

ModularIndustrial

Easy-to-UseNetworked


ModularityModularityI/O Modules

Terminal Bases

Network Modules


FieldPoint – I/O OptionsFieldPoint – I/O Options

I/O ModulesI/O ModulesModel Type Ch I/O RangesFP-AI-100 Analog Input, 12-bit 8 1 V to 36V, 20 mAFP-AI-110 Analog Input, 16-bit 8 mV, V, 20 mAFP-AI-111 Analog Input, 16-bit 16 20 mAFP-TC-120 Thermocouples 8 J,K,T,E,R,S,B,N, mVFP-RTD-122 RTDs, Resistance 8 PT100, PT1000FP-AO-200 Analog Output 8 0-20 mAFP-DI-330 Discrete Input 8 5V to 240 VAC/DC

FP-DI-300 Discrete Input 8 24 VDCFP-DI-301 Discrete Input 16 24 VDCFP-DO-400 Discrete Output 8 24 VDCFP-DO-401 Discrete Output 16 24 VDCFP-RLY-420 Relays, SPST 8 3A @ 35 VDC/240 VAC

FP-CTR-500 Counter Input 8 50 kHz, 24 VDC

FP-PWM-520 Pulse-Width-Modulated Outputs

8 1A @ 5-24 VDC

Model TypeFP-TB-1 Screw TerminalsFP-TB-2 Spring Terminals

Terminal Bases


Network Interface OptionsNetwork Interface Options Serial Ethernet TCP/IP

• 10 Mbps and 100 Mbps

FOUNDATION Fieldbus, H1• Embedded function blocks

– AI, AO, DI, DO, PID

Wireless• Spread spectrum, 900MHz• Works via RS-232


FieldPoint with RS-232/RS-485FieldPoint with RS-232/RS-485

Control Panel

Flow

Pressure Alarm Conditions

STOP

Temperature

RS-232 orRS-485

FP-1000 RS-232 network interface• Connects directly to PC COM port

• Second RS-485 connector to additional FP-1001 modules

FP-1001 RS-485 network interface

RS-485

Up to 25 banks (1,200 m)


Ethernet ConnectivityEthernet Connectivity

FP-1600 network interface• TCP/IP compatibility

• 10 Mbps and 100 Mbps

• Event-driven communications

• Instant data connectivity to network, intranet, and Internet

10Base-T or 100Base-TX


Distributed Control with FieldbusDistributed Control with Fieldbus

FP-3000 network interface/controller module• FOUNDATION Fieldbus H1

• Link Active Scheduler

Embedded function blocks• PID function block for stand-alone, distributed control

• AI, AO, DI, DO, CDO blocks– Alarming, trending, filtering, scaling, interlocks

PIDPID

FP-3000

AI AO


FieldPoint TechnologyFieldPoint Technology

Plug and Play installation and replacementProgrammable power-up

and watchdog statesRobustness and reliability

• Isolation on each module• Wide operating temperature range

-40 °C to + 70 °C (-40 °F to +160 °F)


Configuration SoftwareConfiguration Software

Quick configuration• Network and communications

– Baud rate, addressing, IP, etc.

• FieldPoint hardware– Ranges, filters, power-up states, etc.

• Servers – Named tags, scan rate, etc.

Troubleshooting, monitoringWindows NT/98/95


FieldPoint SoftwareFieldPoint Software

FieldPoint Server• BridgeVIEW• LabVIEW VIs• LabWindows/

LabWindows/CVI

Lookout driver OPC Server

FieldPointServer

FieldPointServer

BridgeVIEWBridgeVIEW LabVIEW,LW/CVI

LabVIEW,LW/CVI

LookoutDriver

LookoutDriver

NN NN

Third-PartyOPC clientThird-PartyOPC client


FieldPoint – SummaryFieldPoint – Summary

ModularEasy

• To install, configure, use, and maintain

• Software integration

Networked• Serial, Ethernet, and Fieldbus

Industrial• Isolated, robust, wide temperature range

FieldPoint Primer

Documents

Transcript of FieldPoint Primer