Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... · ·...
Transcript of Field proven. - Utility Salesutilitysales.net/wp-content/uploads/2015/05/USICatalog... · ·...
Lineman driven. Field proven.
UTILITYSOLUTIONS
™
Phone (828)323-8914Fax (828)323-8410Email [email protected] www.utilitysolutionsinc.com
101 33rd Street Drive SE · Hickory, NC 28602
Utility Solutions was founded in 1990. We design and manufacturehot line tools and products for the electrical power industry.
We are Lineman driven. Our products are Field proven.
Lineman driven. Field proven.™• Our product line has evolved from the field, and from a lineman’s
perspective. • We create innovative designs, and focus on safety, reliability and ease
of use. • Each product is designed and built to exceed industry standards and
have a long and useful life.• All products are Made in USA (excluding cutouts).
Good People = Good Products• We have a design and manufacturing philosophy
of putting the lineman first.• We have a dedicated and talented staff with
years of experience in materials engineering, mechanical engineering, electrical engineering, and machine design.
• We have a stable and experienced workforce, many of whom have been with us for 10 years or more.
Product Development• Our size enables us to bring new ideas to market quicker
than our competition.• We design and build tools FOR linemen that solve a
problem or perform a specific function.• Several of our most widely used products were invented
by linemen.
Do you have an idea for a new product?
Innovative Designs• We manufacture tools and products that linemen WANT to use.• Innovations in load break technology, fiberglass construction, materials
selection, and machining have made Utility Solutions tools and products the best on the market.
2 3
Metering ProductsMeter Grabber 52Electric Meter Jumper Leads 53Low Voltage Bypass Tool 54
Safety & TrainingLoad-Trainer™ 56Grounds Tester 58Tool Demonstration Trailers 59
Rubber GoodsInsulated Rubber Blankets 62Blanket Clamp 63Blanket Buttons 63Klondike Clamp 64Blanket Mate Heavy Duty Blanket Holder 65Jumper Hook 66Jumper-Aid™ 67Bucket Mate Polymeric Hook 68
AppendixFiberglass Hot Stick Part Lists 70Sales Representative Directory 88Standard Terms and Conditions of Sale 91Index 93
Lineman driven. Field proven.
UTILITYSOLUTIONS
™
Phone (828)323-8914Fax (828)323-8410Email [email protected] www.utilitysolutionsinc.com
101 33rd Street Drive SE · Hickory, NC 28602
Load Break ToolsLOAD-RANGER® XLT Load Break Tool 6BREAK-SAFE® Load Break & Pick-up Tool 8BREAK-SAFE® 600 Load Break & Pick-up Tool 10Fuse-Safe™ 12
Overhead DistributionJack Jumper™ Cutout Bypass Tool 14Grab-It™ Cutout Fuse Tube Remover 15Jumper Hook 16Jumper-Aid™ 17Jumper-T 18Conductor Cleaning Clamp 19Conductor Cleaning Brush 20Arm Guard Raptor Shield 21Varmint Shield 22
Overhead Fuse CutoutsOverhead Cutouts 24Expendable Fuse Tube Caps 26
Underground DistributionElbow-Mule™ 28Universal URD Wrench 29Pad Mount Multi-Tool 29Strip-N-Coil™ 30
Fiberglass Hot SticksBLUE STRIPE® Telescopic Hot Sticks 34Heavy Duty Rubber End Cap Option 35Protect your Investment! 35Add a Protective Bag 35BLUE STRIPE® Shotgun Sticks 36BLUE STRIPE® Sectional Disconnect Sticks 38Snap On Adapters for Disconnect Sticks 40Sectional Disconnect Storage Bags 40BLUE STRIPE® Measuring Sticks 41BLUE STRIPE® Foam Filled Straight Sticks 42Boom Holster 43BLUE STRIPE® Rescue Hook 44BLUE STRIPE® Severe Weather Stick 44Protective Bags for Fiberglass Sticks 45Bucket Stick Storage Case 45Hot Stick Accessories 46Spline Torque Bar 46BLUE STRIPE® Cloth 48BLUE STRIPE® Wipes 48BLUE STRIPE® Hot Stick Wax 49BLUE STRIPE® General Purpose Cleaner 49
UTILITY SOLUTIONSPRODUCT CATALOG
6
BREAK-SAFE® Load Break & Pick-up Tool
8
BREAK-SAFE® 600 Load Break & Pick-up Tool
10
Fuse-Safe™ 12
LOAD-RANGER® XLT Load Break Tool
Load Break Tools
7
Load Break Tools
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
6
Load Break Tools
COMPARISON LOAD-RANGER® USLR-XLT -1
COMPETITION LOAD-RANGER®
USLR-XLT -2COMPETITION
MAXIMUM VOLTAGE 27 kV 27 kV 27 kV - 38 kV 27 kV - 38 kV
MAXIMUM AMPERAGE 900 AMP 900 AMP 900 AMP 900 AMP
WEIGHT 4 lb 3 oz 5 lb 6 oz 4 lb 12 oz 6 lb
COUNTER AVAILABLE OPTIONAL MANDATORY OPTIONAL MANDATORY
METAL TO METAL CLEARANCE DURING STROKE(FLASH-OVER RESIS-TANCE)
8.2” EST 7.1” EST 12.2” EST 10” EST
RESET FUNCTIONUNIQUE SIDE
LOCATIONNO PINCH DESIGN
TOP LOCATIONUNIQUE SIDE
LOCATIONNO PINCH DESIGN
TOP LOCATION
USLR-XLT-1 UP TO 27 kV RATED, 900 AMP WITH COUNTER
USLR-XLT-2 27 kV - 38 kV RATED, 900 AMP WITH COUNTER
The Lightest, Most User-Friendly Portable Load Break Tool Available!
USLR-XLT-2
LOAD-RANGER® USLR-XLT
HOW TO ORDER:
USLR-XLT-1
add “E” for Extended Hood
OPTIONSThe XLT line is offered with numerous options including a Pad Mount version, hard case, soft case, extended insulated hood, and an economical non-counter version.
Most Common Versions:USLR-XLT-1-H LOAD-RANGER® XLT Load Break Tool, 27 kV RATED, 900 AMP WITH COUNTER AND HARD CASE
USLR-XLT-2-H LOAD-RANGER® XLT Load Break Tool, 27 kV -38 kV RATED, 900 AMP WITH COUNTER AND HARD CASE
The Pad Mount option “P” uses a uniquely designed operating arm that creates a lower profile to provide maximum clearance for the tight confines in pad gear. This option also comes standard with an extended insulated hood.
add “NC” for No Counter
add “S” for Soft Case
add “H” for Hard Case
LIGHTWeighing under 5 pounds, the XLT line of Load Break Tools are by far the lightest portable load break tools available in the world. The XLT-1 is approximately 1 lb 3 oz lighter than the competition. Tool weight becomes extremely important when the tool is attached to the end of a fiberglass operating stick. The lighter the better for optimum tool control and minimal operator fatigue.
EASYThe XLT line was designed to be user
friendly and simple to operate. It incorporates an optional counter and a unique reset button
located on the side which allows full tool reset without glove removal. This results in NO
MORE PINCHED FINGERS. Spare parts are readily available and inspection and maintenance
procedures are easy to follow.
SAFE The Utility Solutions
XLT product line has the highest
measured metal-to-metal clearance of any load break tool. This greatly
reduces flash-over potential during
operation.
LOAD-RANGER® USLR-XLT
USLR-XLT-1
LOAD-RANGER® XLT Load Break Tool
9
Load Break Tools
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
8
Load Break Tools BREAK-SAFE®
Floating Head Style Duckbill Style
The ONLY Load Break & Pick-up Tool Available!
Bottom
Optional Soft Case
Remote Trigger Design!
COMPARISON BREAK-SAFE® USBS-15
BREAK-SAFE® USBS-27
BREAK-SAFE® USBS-46
OPERATIONAL VOLTAGE 15 kV 27 kV 46 kV
LOAD BREAK RATING 300 AMP 300 AMP 200 AMP
LOAD PICKUP RATING 300 AMP 300 AMP 200 AMP
CONTINUOUS CURRENT RATING
300 AMP 300 AMP 200 AMP
CONDUCTOR SIZE #6 COPPER MIN. up to 954 ACSR (1.1” dia.)
MAX.
#6 COPPER MIN. up to 954 ACSR (1.1” dia.)
MAX.
#6 COPPER MIN. up to 954 ACSR (1.1” dia.)
MAX.
WEIGHT 7 lb 1 oz 7 lb 14 oz 10 lb 1 oz
DIMENSIONS 27” long x approx. 2.5” dia.
31” long x approx. 2.5” dia.
39” long x approx. 2.5” dia.
USBS-15-1-PS 15 kV - 300 AMPS WITH FLOATING HEAD
USBS-15-2-PS 15 kV - 300 AMPS WITH DUCKBILL HEAD
USBS-27-1-PS 27 kV - 300 AMPS WITH FLOATING HEAD
USBS-27-2-PS 27 kV - 300 AMPS WITH DUCKBILL HEAD
USBS-46-1-PS 46 kV - 200 AMPS WITH FLOATING HEAD
USBS-46-2-PS 46 kV - 200 AMPS WITH DUCKBILL HEAD
OPTIONS
USBS-xx-x-PS-S WITH SOFT CARRYING CASE
HOW TO ORDER:
USBSBREAK-SAFE® USBS
EASY & SAFEUsing an insulated fiberglass hot stick to break load and activate the side-mounted trigger to pick-up load, keeps personnel out of harms way. A locking safety pin ensures the tool stays in either the open or closed position until the operator is ready to proceed. A yellow indicator band ensures that the tool has fully closed and is ready for the next load break function.
PORTABLE SWITCHThe patented BREAK-SAFE® is the only load break and load pick-up tool available in the world. Lightweight and compact, in the hands of a trained lineman the BREAK-SAFE® functions as a portable switch to provide repair/maintenance convenience and flexibility almost anywhere on the system.
POWERFUL This tool is a
“must have” for any organization
committed to minimizing repair or
maintenance downtime while providing field repair personnel the
utmost in support capability. The BREAK-
SAFE® is equipped with a conductor bar to permit use
of existing jumper cables.
OPTIONSThe BREAK-SAFE® is offered
in 15 kV, 27 kV, and 46 kV ratings. For those organizations
that do not allow the use of gloved installation, Utility
Solutions offers the duckbill style head. This option allows the
BREAK-SAFE® to be installed and removed from the line using
a fiberglass shotgun stick. USBS-15-1-PS
BREAK-SAFE® Load Break & Pick-up Tool
11
Load Break Tools
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:
10
Load Break Tools
Dual Conductor BarsExtra Large Clamp
USBS-600-1 BREAK-SAFE® 600 AMP
USBS-600-1-S WITH SOFT CARRYING CASE
600 Amp7.2 - 27 kV
COMPARISON BREAK-SAFE® USBS-600-1
BREAK-SAFE® USBS-15
BREAK-SAFE® USBS-27
OPERATIONAL VOLTAGE 7.2 - 27 kV 15 kV 27 kV
LOAD BREAK RATING 600 AMP 300 AMP 300 AMP
LOAD PICKUP RATING 600 AMP 300 AMP 300 AMP
CONTINUOUS CURRENT RATING
600 AMP 300 AMP 300 AMP
CONDUCTOR SIZEAll sizes up to 2” dia.
#6 COPPER MIN. up to 954 ACSR (1.1” dia.)
MAX.
#6 COPPER MIN. up to 954 ACSR (1.1” dia.)
MAX.
WEIGHT 10 lb 13 oz 7 lb 1 oz 7 lb 14 oz
DIMENSIONS 32” long x approx. 3.5” dia.
27” long x approx. 2.5” dia.
31” long x approx. 2.5” dia.
BREAK-SAFE® USBS
Optional Soft Case
BREAK-SAFE® USBS
FEATURESSome of the unique patent pending features include an extra large clamp capable of handling all wire sizes up to nearly 2” diameter. Dual
INDUSTRY FIRSTIntroducing the industry’s first portable switch rated at 600 amp for all three tool functions: load break, load pick-up and continuous current duty. It is fully rated from 7.2 kV to 27 kV.
SAFETYThe USBS-600
is designed with a patent pending
internal safety lock. If the tool is not reset, the
tool will not open. An external, manual locking pin keeps the tool either
locked open or closed, until the operator is ready.
This tool features durable electrical grade
fiberglass housings and
a glove friendly design.
BREAK-SAFE® 600 Load Break & Pick-up Tool
conductor bars allow the use of two mechanical jumper clamps, which is needed to go above the typical 300 amp rating of mechanical jumpers.
- Portable Switch- 7.2 kV - 27 kV Range- 600 amp- Safe & Durable
12
Load Break Tools
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
The Fuse-Safe™ is a portable current-limiting fuse and fault close-in protection tool. This device offers an easier and safer method of protection compared to traditional cut-out based devices which rely on fuse tubes and bulky insulators. This device is extremely useful when placed in series with the Utility Solutions BREAK-SAFE®.
The Fuse-Safe™ is the best choice for Fire prevention areas which cannot use open fuse tube devices. The current-limiting fuse design will not expel hot metal or gases when triggered.
The Fuse-Safe™ consists of two components: an upper duckbill coupling ring and a lower conductor bar coupling ring. These components directly attach to any 5/8” studded end current limiting fuse using a standard 1/8” Allen wrench (provided). The fuse is easily replaced with only two Allen screws.
The Fuse-Safe™ USFS-001/2 uses a 5/8” diameter conductor bar and does NOT come with a current limiting fuse. The USFS-003/4 uses a 3/8” diameter conductor bar and has a current limiting fuse provided by Thomas & Betts Hi-Tech Fuses. Our website has a complete list of fuse options.
USFS-001 FUSE-SAFE™ 5/8” CONDUCTOR BAR WITHOUT CURRENT LIMITING FUSE
USFS-002 FUSE-SAFE™ 5/8” CONDUCTOR BAR WITH FUSE INCLUDED
USFS-003 FUSE-SAFE™ 3/8” CONDUCTOR BAR WITHOUT CURRENT LIMITING FUSE
USFS-004 FUSE-SAFE™ 3/8” CONDUCTOR BAR WITH FUSE INCLUDED
Fuse-Safe™ USFS
Fuse-Safe™
Lightweight, Portable Protection. Perfect for High Fire Prevention Areas!
Duckbill Clamp
Jack Jumper™ Cutout Bypass Tool 14
Grab-It™ Cutout Fuse Tube Remover 15
16Jumper Hook
17Jumper-Aid™
18Jumper-T
19Conductor Cleaning Clamp
20Conductor Cleaning Brush
21Arm Guard Raptor Shield
22Varmint Shield
Overhead Distribution
15
Overhead Distribution
14
Overhead Distribution
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:HOW TO ORDER:
The patented Jack Jumper™ Cutout Bypass Tool permits a safe and quick method to
temporarily bypass an overhead cutout without the tedious use of bulky jumper cables. The tool is indispensable for fuse coordination tasks and
permits easy bypass of an underground dip. The Jack Jumper™ Cutout Bypass Tool saves time and money,
eliminates risk of service interruption and prevents accidental cross phasing.
All Jack Jumper™ Cutout Bypass Tools are rated at 100 AMP. Installation and removal is done with a shotgun stick.
Jack Jumper™ Cutout Bypass ToolNo More Jumper Cables!
USJJ
Jack Jumper™ USJJ
Catalog Number
Description Weight
USJJ-001 15 kV Cutout Bypass Tool 12 oz
USJJ-002 27 kV Cutout Bypass Tool 15 oz
USJJ-003 15 kV Chance™ Loadbreak Cutout Bypass Tool 15 oz
USJJ-004 15 kV ABB™ Loadbreak Cutout Bypass Tool 15 oz
USJJ-005 38 kV Cutout & S&C™ SMD-20 15 kV Power Fuse Bypass Tool
1 lb 3 oz
USJJ-006 S&C™ SMD-20 27 kV Power Fuse Bypass Tool 1 lb 4 oz
USJJ-007 S&C™ SMD-20 38 kV Power Fuse Bypass Tool 1 lb 14 oz
USJJ-008 27 kV Chance™ Loadbreak Cutout Bypass Tool 1 lb 2 oz
USJJ-009 27 kV ABB™ Loadbreak Cutout Bypass Tool 1 lb 2 oz
see chart above
USJJ-XXX-S Optional Soft Case (not available on USJJ-007)
The patented Grab-It™ offers a simple and economical method to safely remove or install overhead fuse barrels. The Grab-It™ design provides positive control of the fuse barrel even in high wind conditions to prevent accidental drops. No need to find the fuse barrel pull ring or lifting eye which is difficult in low lighting conditions. Simply sweep behind the fuse barrel and lift. The Grab-It™ works
as well at the end of a 50 ft telescopic as it does at the end of an 8 ft bucket stick. Requires no special stick movement or procedure to operate.
The Grab-It™ is machined from aircraft grade aluminum to provide years of trouble free operation. The Grab-It™ has no moving parts, no springs and no plastic parts to break.
GRAB-IT
Grab-It™ GRAB-IT
GRAB-IT-1
GRAB-IT-1 100 AMP CUTOUT FUSE TUBE REMOVER
GRAB-IT-2 100 & 200 AMP CUTOUT FUSE TUBE REMOVER
GRAB-IT-3 SMU-20 CUTOUT FUSE TUBE REMOVER
GRAB-IT-1 GRAB-IT-2 GRAB-IT-3FUSE TUBES 100 AMP 100 & 200 AMP SMU-20
DIMENSIONS 4.5” x 4.5” x 4” 4.5” x 4.5” x 4” 6” x 4.5” x 4”
WEIGHT 11 oz 11 oz 15 oz
GRAB-IT-3
Works well on a 50 ft telescopic or an 8 ft bucket stick.
*add “F” for Hi Visibility
Grab-It™ Cutout Fuse Tube Remover
17
Overhead Distribution
16
Overhead Distribution
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:HOW TO ORDER:
Product Dimensions: 11” x 4.5” x .5”Product Weight: 6 oz
The Jumper Hook is designed to eliminate jumper clamp sag and prevent potential cross-phasing situations without the time consuming use of tape, bungee cords or rope. The Jumper Hook also minimizes a jumper clamp swaying in high wind conditions.
Simply hang multiple Jumper Hook units along the intended jumper clamp path and let the tool cradle the jumper clamp. Easily installed by a gloved hand or with a shotgun stick the Jumper Hook will fit over any class 2 or 3 line hose and exhibits a
flash-over resistance of over 50 kV.
The Jumper Hook is made of a high visibility polymer material that can handle the rigors of daily use even in cold temperatures.
Jumper Hook
USJH-001
Jumper Hook USJH
USJH-001 JUMPER HOOK (6 per pack)
No More Jumper Lead
Sag!
Product Dimensions: 14” x 10” x 1”Product Weight: 1 lb 3 oz
The patented USJH-002 Jumper-Aid™ is designed to support a jumper wire during construction, maintenance, or repairs. It is particularly useful when a jumper is required to be in the vicinity of a conductor of a different voltage/phase. The USJH-002 allows for the mechanical jumper and or conductor to be supported while wrapped in an insulating rubber blanket and or line hose while eliminating the need for rope or tape. The pivoting nature of the USJH-002 offers positive locking about the jumper/conductor. The USJH-002 is also a useful tool to prevent jumper “sag” about a cross arm.
Jumper-Aid™
USJH-002
Jumper-Aid™ USJH
USJH-002 JUMPER-AID™
19
Overhead Distribution
18
Overhead Distribution
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:HOW TO ORDER:
Product Dimensions: 26.5” x 12” Product Weight: 3 lb
The Jumper-T tool series eliminates the need for purchasing bulky lengths of extra long jumper cables by allowing a lineman to combine shorter sections of jumper cable.
Use the Jumper-T with a BREAK-SAFE® tool to create a straight forward visible gap. Meets or exceeds all applicable industry performance criteria including OSHA 1926.951(d)(1) and ASTM F-711.
Non-conductive foam filled fiberglass provides over 15” of metal-to-metal clearance between the upper duckbill clamp and the lower parking stand. The upper duckbill clamp will tighten on wire ranging from #6 copper up to 1033 MCM. Both USJT-001 and USJT-002 are rated for 400 Amperes Continuous Current.
The USJT-001 is manufactured using a solid horizontal aluminum
parking stand (11 1/4” long x 5/8” diameter).
The USJT-002 is manufactured using a bent handlebar configuration (3/4” diameter aluminum) that allows for mechanical jumpers to be clamped in both the horizontal and vertical plane. Attachment of jumpers in the vertical plane minimizes sag and reduces the potential for cross-phasing to occur.
Custom sizes available - Call your Sales Representative for details.
Jumper-T
USJT-001/002
Jumper-T USJT
Use Less Heavy Bulky
Cable!
Duckbill top clamp
USJT-001
USJT-002
USJT-001 JUMPER-T 5/8” DIA. STRAIGHT JUMPER BAR
USJT-002 JUMPER-T ¾” DIA. BENT JUMPER BAR
Product Dimension: 12” x 5” x 5” Product Weight: 2 lb 8 ozConductor Size range: #4 minimum through 750 MCM maximum C-clamp design
The Utility Solutions Conductor Cleaner Clamp offers optimum conductor cleaning prior to infield grounding and jumping connections. The C-Clamp design permits either hand held operation or shotgun operation while providing a full 360 degree conductor cleaning. USCC-001 Conductor Cleaning Clamp ships with the USCC-002 and USCC-003 brush pad sets.
Brush pad sets are 5” in length and can be interchanged without the use of any tools. Includes USCC-002 brush pad set for 250 MCM - 750 MCM conductors and the USCC-003 brush pad set for #4 - 250 MCM conductors.
Conductor Cleaning Clamp
USCC-001
Includes2 Brush Sets!
USCC-002 USCC-003
USCC-001 CONDUCTOR CLEANING BRUSH (includes USCC-002 & USCC-003)
USCC-002 REPLACEMENT BRUSH SET FOR 250 MCM - 750 MCM CONDUCTOR
USCC-003 REPLACEMENT BRUSH SET FOR #4 - 250 MCM CONDUCTOR
Conductor Cleaning Clamp USCC
21
Overhead Distribution
20
Overhead Distribution
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:HOW TO ORDER:
The unique design of the Conductor Cleaning Brush allows full 360 degree cleaning and remote operation with the use of an insulated shotgun stick. Simply lock the brush into a shotgun stick and push the “V” throat against the conductor to open the jaws and enclose the conductor. Now place the shotgun stick in the unlocked position but keep the conductor cleaner secured within the shotgun end. This will permit the operator to provide a full 360 degree cleaning action on the conductor. Stainless steel tension springs assure aggressive brush cleaning action to remove even the most stubborn oxide layer.
When cleaning is completed return the shotgun stick to the locked position and remove the tool.
If you are serious about obtaining a solid jumper or grounding connection our cleaning brushes are a must.
Our conductor cleaners are machined from a tough weather resistant polymer. All hardware is stainless steel to provide years of trouble free service. Brush set replacement requires only a Phillips screwdriver.
Conductor Cleaning Brush
USCC-004/006
Cleaning Brush USCC
The Last Word in Oxide Removal!
USCC-007
USCC-005
USCC-004 3”-11” CONDUCTOR CLEANING BRUSH(includes USCC-005)
USCC-006 3/4” TO 3” CONDUCTOR CLEANING BRUSH(includes USCC-007)
USCC-005 REPLACEMENT BRUSH SET FOR USCC-004
USCC-007 REPLACEMENT BRUSH SET FOR USCC-006
USCC-004
USCC-006
CONDUCTOR SIZE
WEIGHT REPLACEMENT BRUSH
USCC-004 3” - 11” 1 lb 3 oz USCC-005
USCC-006 3/4”-3” 15 oz USCC-007
Product Dimensions: 17” wide x 48” long x 9” high Product Weight: 6 lb
The Arm Guard Raptor Shield offers a unique solution to preventing raptor nesting problems without creating secondary eyesore problems. The arm guard was developed by utility personnel in the picturesque Chesapeake Bay area where unsightly and or obtrusive animal guards were not considered a viable option.
The sloped surface will automatically shed any nesting materials placed on the surface. The
Arm Guard Raptor Shield is manufactured from a clear polymer which exhibits high resistance to outdoor weathering, impact resistance & UV degradation.
The Arm Guard comes pre-drilled for easy mounting on wooden cross arms. Alternatively, the Arm Guard Raptor Shield can be installed on concrete or fiberglass cross arms with the use of cable straps.
Arm Guard Raptor Shield
USAG-001
Raptor Shield USAG
USAG-001 ARM GUARD RAPTOR SHIELD
Eliminate Nesting
Problems!
22
Overhead Distribution
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:
Varmint Shield
USVS
Varmint Shield USVS
Installs with a Shotgun
Stick!
USVS-001 16” VARMINT SHIELD - GRAY
USVS-002 16” VARMINT SHIELD - RED
USVS-003 20” VARMINT SHIELD - GRAY
USVS-004 20” VARMINT SHIELD - RED
Overhead Cutouts 24
Expendable Fuse Tube Caps 26
Overhead Fuse Cutouts
Product Dimensions: 16” / 20” diameter x .5 “ thicknessProduct Weight: 14 oz / 1 lb 5 ozColor: Gray or Red
The Varmint Shield is the proactive approach to eliminating animal related electrical service interruptions. The varmint shield prevents critters from simultaneously touching the primary and metal case of a transformer. The varmint shield can also be installed about substation insulators and bushings. The unique design permits the unit to be installed quickly with an insulated shotgun stick and without the need to drop service or expose the lineman to energized equipment during installation.
The Varmint Shield is molded from a UV stabilized and flame retardant (UL 94 V-0) polymer to provide many years of maintenance free in field service. The unique design will not trap or accumulate fallen leaves and has no spring components to break off, especially during cold weather installations. The Varmint Shield will handle all
distribution system applications and can simultaneously address both high
voltage bushing and adjacent arrestor bushing. Diameter lines are molded into the unit to provide an accurate and easy in-field cutting template on bushing diameters ranging from 1.75” to 6”.
25
Overhead Fuse Cutouts
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:
24
Overhead Fuse Cutouts
USCO-005
Overhead Cutouts
Overhead Cutout USCO
USCO
USCO-003
Utility Solutions offers both porcelain and polymeric cutouts for systems rated at 15kV and 27kV.
Utility Solutions Cutouts are RUS approved. Utility Solutions Cutouts meet and or exceed all applicable ANSI performance requirements with testing performed at an accredited independent laboratory.
Utility Solutions cutouts are manufactured with the following features standard:
All electrical contacts are silver plated.Tin plated parallel grooves are standard. Groove 1 handles #6 solid through #6 stranded.Groove 2 handles #2 solid through 25 mil or 4/0 ACSR.
Heavy-duty galvanized sleet shield, arcing horns and NEMA Type
B brackets are standard.Polymeric cutouts are manufactured out
of 100% silicone rubber, not a polymer alloy.
All mechanical fasteners are manufactured from 304 stainless steel.
Now RUS Approved!
USCO-003
VOLTAGE RATING
CONTINUOUS CURRENT
BIL LEVEL
INTERRUPTION LEVEL
LEAKAGE DISTANCE
SHIPPING SIZE
SHIPPING WEIGHT
USCO-005 15 kV 100 AMP 110 kV 10 kA (ASYM) 12.6” 17” x 14.5” x 5” 12 lb 14 oz
USCO-007 27 kV 100 AMP 150 kV 8 kA (ASYM) 24.8” 20” x 15.5 x 5” 14 lb 12 oz
USCO-008 27 kV 100 AMP 150 kV 12 kA (ASYM) 24.8” 20” x 15.5 x 5” 14 lb 12 oz
EQUIVALENT TO:
USCO-001 USCO-003 USCO-004
S&C 89021R10-CD 89022R10-CD 89033R10-CD
A.B. Chance C710-112PB C710-211PB C710-213PB
Overhead Cutout USCO
USCO-007
EQUIVALENT TO:
USCO-005 USCO-007 USCO-008
S&C 89021R10-PCD 89022R10-PCD (150 kV BIL)
89052R10-PCD (150 kV BIL)
A.B. Chance CP710112-PB CP710211-PB CP710213-PB
see chart above
Porcelain
Polymeric
VOLTAGE RATING
CONTINUOUS CURRENT
BIL LEVEL
INTERRUPTION LEVEL
LEAKAGE DISTANCE
SHIPPING SIZE
SHIPPING WEIGHT
USCO-001 15 kV 100 AMP 110 kV 10 kA (ASYM) 8.5” 19” x 13.5” x 4.5”
17 lb 8 oz
USCO-003 27 kV 100 AMP 125 kV 8 kA (ASYM) 11.0” 15.5” x 13” x 5” 21 lb 8 oz
USCO-004 27 kV 100 AMP 125 kV 12 kA (ASYM) 11.0” 15.5” x 13” x 5” 21 lb 8 oz
26
Overhead Fuse Cutouts
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:
Utility Solutions Expendable Fuse Caps are manufactured in accordance with ANSI C37.42 design criteria concerning thread pitch and venting pressure. The Utility Solutions line of expendable caps will work on all 100 and 200 Amp expendable fuse tubes. Stamped “E” on button head signifies Expendable Cap.
The USCO-062 & USCO-063 use a “stove pipe” design which directs expelled gases vertically for close horizontal phase-to-phase construction.
Expendable Fuse Tube Caps
USCO
Overhead Cutout USCO
USCO-060 100 AMP EXPENDABLE FUSE TUBE CAP
USCO-061 200 AMP EXPENDABLE FUSE TUBE CAP
USCO-062 100 AMP STOVEPIPE EXPENDABLE FUSE TUBE CAP
USCO-063 200 AMP STOVEPIPE EXPENDABLE FUSE TUBE CAP
USCO-060 USCO-061 USCO-062 USCO-063GE Durabute part number 9F34ALW032 - 9F34ALW028 9F34ALW029
A.B. Chance W700-0345 - - -
ABB part number 3872A21G01 161A292H04 3872A23G01 403A062G03
Cooper part number F024X1C F085X1C - -
Kearney part number 129052 129023 - -
Fuse Tube Amperage Type 100 Amp 200 Amp 100 Amp 200 Amp
Size 1.1” dia x 5/8” high 1.4” dia x 5/8” high 1.1” dia x 1.4” high 1.4” dia x 1.5” high
Weight 1 oz 2 oz 2 oz 3 oz
Elbow-Mule™ 28
Universal URD Wrench 29
Pad Mount Multi-Tool 29
Strip-N-Coil™ 30
Underground Distribution
29
Underground Distribution
28
Underground Distribution
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:HOW TO ORDER:
Product Dimensions: 24” x 7” x 1.5”Product Weight: 3 lb 14 oz
The Elbow-Mule™ is a standard insulated shotgun stick attachment designed to remove stubborn seized elbows without applying destructive and dangerous kinetic impact force.
The Elbow-Mule™ applies consistent, controlled force in a highly localized manner to free even the most stubborn elbow assembly.
The attachment legs permit an operator to utilize the tool on a wide variety of transformer configurations and are manufactured from insulated fiberglass to provide maximum safety to the operator and equipment.
Elbow-Mule™
USEP-15-27/35
Elbow-Mule™ USEP
RemoveStubbornElbows!
USEP-15-27 15 kV & 27 kV ELBOW-MULE™ WITH STORAGE BAG
USEP-35 38 kV ELBOW-MULE™ WITH STORAGE BAG
USEP-15-27
Universal URD Wrench
USUW-001
URD Wrench / Pad Mount Multi-Tool
Aluminum & Stainless Construction!
Penta-head Wrench
3/4” Hex Wrench
Product Dimension: 12” x 5” x 2.5”Product Weight: 12 oz
The universal URD wrench is a multi-functional tool designed specifically for utility field personnel responsible for both electrical and water services.
The URD Wrench features an ANSI penta-head as well as a standard six point ¾” wrench incorporated on opposite ends of the handle. The stainless steel shaft permits the easy prying of manhole covers and is also great for removing debris from pad gear lock pockets. The shaft end doubles as a flat head screwdriver.
Product Dimension: 10“ x 6“Product Weight: 1 lb 9 ozAll sockets 1/2 “ drive
The Pad Mount Multi-Tool reduces the number of tools required by an individual to access pad gear. The Pad Mount Multi-Tool is supplied with the following easily interchangeable ½” drive sockets:
Pad Mount Multi-Tool USMT-001 Fits Nearly Every Type
of Pad Gear on Every Utility System!
USUW-001 UNIVERSAL URD WRENCH
USMT-001 PAD MOUNT MULTI-TOOL
3/4” Socket5 Point Penta Socket9/16” Deep Well SocketDrag Link Socket
The elongated lug wrench design permits the user to apply substantial torque to free stubborn fasteners, especially penta-head bolts located near ground level.
The lug wrench body is manufactured from chrome plated cold rolled steel to provide years of trouble free field use.
USUW/USMT
30
Underground Distribution
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:
Strip-N-Coil™
USCS-001
Strip-N-Coil™
USCS-001 STRIP-N-COIL™
Product Dimension: 1.75” Dia x 7.5”Product Weight: 6 oz
The Strip-N-Coil™ is a time saving tool that permits easy cutting of the outer insulation on underground cables. Quickly twist the concentric neutrals into a tight compact bundle for cutting. It can also be used to install or remove bushing inserts.
No more tedious twisting with pliers. The Strip-N-Coil™ is designed for underground cable from #2 through 750 MCM.
The Strip-N-Coil™ requires an electric drill or a ratchet fitted with a 7/16” socket.
USCS
BLUE STRIPE® Telescopic Hot Sticks
34
BLUE STRIPE® Shotgun Sticks 36
Snap On Adapters for Disconnect Sticks
40
BLUE STRIPE® Sectional Disconnect Sticks
38
Fiberglass Hot Sticks
BLUE STRIPE® Foam Filled Straight Sticks
42
Boom Holster 43
BLUE STRIPE® Severe Weather Stick
44
BLUE STRIPE® Measuring Sticks 41
BLUE STRIPE® Rescue Hook 44
continued. . .
Protective Bags for Fiberglass Sticks
45
Hot Stick Accessories 46
Fiberglass Hot Sticks
Bucket Stick Storage Case 45
BLUE STRIPE® Hot Stick Wax & Cleaner
49
BLUE STRIPE® Cloth & Wipes 48
continued
Spline Torque Bar 46
35
Fiberglass Hot Sticks
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
34
Fiberglass Hot Sticks
The most vulnerable parts of any stick are the spring loaded plastic buttons and the spline ends. Molded and cast parts can be less expensive to produce, but are often less durable. We machine each button and aluminum spline end out of solid material.
Our patent pending Easy Tip Lock Replacement feature saves time and money. Buttons can be replaced without sacrificing the entire tip section. The repair is easy enough to be done in the field so sticks stay on the job longer and repair costs go down. Bucket operable models not available with Tip Lock feature.
Conventional fiberglass construction uses a woven matt. This creates pockets and voids where dirt and moisture can collect. Our unique non-woven fiberglass is unidirectional which creates a smoother surface. The BLUE STRIPE® Fiberglass Hot Sticks have a lineman friendly grip, stay cleaner longer, and are easier to clean and meet standards.
BLUE STRIPE® Telescopic Hot Sticks
Telescopic Sticks USTS Telescopic Sticks USTS
SIZE CLOSED LENGTH
BASEDIAMETER
NO. OF SECTIONS
WEIGHT OPERATING LENGTHS
PROTECTIVEBAG
GROUND OPERABLEUSTS-050 50 FT. 68” 3 1/2” 11 20 lb 50’,45’,40’,35’,30’ USSB-006
USTS-045 45 FT. 66” 3 1/8” 10 16 lb 8 oz 45’,40’,35’,30’,26’ USSB-006
USTS-040 40 FT. 65” 2 7/8” 9 13 lb 8 oz 40’,35’,30’,26’,21’ USSB-006
USTS-035 35 FT. 63” 2 5/8” 8 11 lb 35’,30’,26’,21’,17’ USSB-006
USTS-030 30 FT. 62” 2 3/8’ 7 8 lb 14 oz 30’,26’,21’,17’ USSB-006
USTS-025 25 FT. 60” 2 1/8’ 6 6 lb 14 oz 26’,21’,17’ USSB-005
USTS-020 20 FT. 58” 1 7/8” 5 5 lb 3 oz 21’,17’ USSB-005
USTS-016 16 FT. 56” 1 5/8’ 4 4 lb 16’,12’ USSB-005
USSA-ETE* 5 FT. 56” 1 1/4’ 1 1 lb adds 56” USSB-005
BUCKET OPERABLEUSTS-012 12 FT. 30” 2 5/8” 7 5 lb 11 oz 12’ USSB-003
USTS-010 10 FT. 28” 2 3/8’ 6 4 lb 11 oz 10’ USSB-003
USTS-008 8 FT. 26” 2 1/8’ 5 3 lb 11 oz 8’ USSB-003
USTS-006 6 FT. 26” 1 7/8” 4 2 lb 8 oz 6’ USSB-003
USTS-004 4 FT. 26” 1 5/8’ 3 2 lb 4’ USSB-003
*The USSA-ETE foam filled extensions add length to any telescopic hot stick.
Heavy Duty Rubber End Cap OptionUSTS-045-BOOT 45 FT. HEAVY DUTY RUBBER END CAP
USTS-040-BOOT 40 FT. HEAVY DUTY RUBBER END CAP
USTS-035-BOOT 35 FT. HEAVY DUTY RUBBER END CAP
USTS-030-BOOT 30 FT. HEAVY DUTY RUBBER END CAP
SMOOTHER SURFACE
EPOXY RESINThe BLUE STRIPE® Fiberglass Hot Stick line uses Epoxy resin which is the most water resistant, durable, and longest lasting resin available and has superior electrical properties. Our sticks have a very high resistance to failure due to water absorption or delamination.
HIGH PERFORMANCE CLOSED CELL FOAMTip sections and foam filled sticks offer an added measure of safety by preventing water from entering the inside. Our superior Closed Cell Foam construction is durable and long lasting; extending the safety margin.
EASY TIP LOCK REPLACEMENT (patent pending)
BLUE STRIPE® PATENTED ALIGNMENT FEATUREThe most revolutionary design change to hot sticks since fiberglass is our patented BLUE STRIPE® alignment feature. Extending even our 50 footer is easy with this ingenious button alignment feature.
CNC MACHINED BUTTONS & SPLINE ENDS
APPROVED AND IN STOCKOur BLUE STRIPE® Fiberglass Hot Sticks meet all applicable industry standards, including OSHA Sub V Sec. 1926.951(d) and ASTM F1826. Our U.S. production capabilities are able to stay ahead of demand so we always have your next stick in stock.
Protect your Investment!
Add a Protective Bag
Need it fast? Items in green can ship in 24 hours. See our website for details.QUICK SHIP PROGRAM
37
Fiberglass Hot Sticks
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
36
Fiberglass Hot Sticks
HOW TO ORDER:
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
Fiberglass Hot Sticks
Utility Solutions proudly offers both internal rod and external rod fixed length shotgun sticks.
Every Utility Solutions shotgun stick is manufactured from the highest electrical
grade insulated fiberglass and meet or exceed all applicable industry performance criteria including ASTM F711, IEC 855, and OSHA Sub. R Section 1910.269 (J) and OSHA Sub. V Section 1926.951(d).
Some of the features found on Utility Solutions BLUE STRIPE® shotgun sticks include:
• Replaceable shotgun hanger hooks are not molded into the head making replacement quick and inexpensive if necessary.
• The patented BLUE STRIPE® is positioned on the shotgun stick to assist the operator by acting as a visual aide to minimize equipment drops. When the BLUE STRIPE® is positioned facing upward the stainless steel hook will open downward.
• The operating hook is manufactured from stainless steel to provide maximum strength when pulling, pushing or twisting stubborn equipment.
• Multiple rod guides ensure smooth operation of the external rod shotgun sticks.
• External rod shotgun sticks are filled with high performance closed cell foam to prevent water absorption.
• Universal spline ends are precision CNC machined from aircraft grade aluminum. Utility Solutions universal spline teeth simply will not shear off as commonly occurs on cast universal spline teeth.
BLUE STRIPE® Shotgun Sticks
Shotgun Sticks USSG
Rugged and Versatile!
Standard model internal and external shotgun sticks utilize a full view side break hook (hook pivots in the horizontal plane in relation to the hook release trigger).
Add the -BBH designation to any internal rod shotgun stick to specify a bottom break hook (hook pivots in the vertical plane in relation to the hook release trigger).
USSG-XXX-YYZZ-BBHoptional
Bottom Break Hook IR - InternalER - External
004 - 4ft Length006 - 6ft Length008 - 8ft Length010 - 10ft Length
EXAMPLE: USSG-006-EREC6’ External Rod Shotgun Stick with Rub-ber End Cap
Shotgun Sticks USSG
Catalog Number Length Weight PROTECTIVEBAG
USSG-004-IRZZ 4’ 6” 4 lb 4 oz USSB-005
USSG-004-ERZZ 4’ 6” 4 lb 4 oz USSB-005
USSG-006-IRZZ 6’ 6” 5 lb 3 oz USSB-007
USSG-006-ERZZ 6’ 6” 5 lb 6 oz USSB-005
USSG-008-IRZZ 8’ 8” 5 lb 14 oz USSB-009
USSG-008-ERZZ 8’ 8” 6 lb 3 oz USSB-009
USSG-010-IRZZ 10’ 6” 6 lb 13 oz USSB-011
USSG-010-ERZZ 10’ 6” 7 lb 5 oz USSB-011
EC - Rubber End Cap
SE - Universal Spline
FA - Female ½” Socket Adapter
39
Fiberglass Hot Sticks
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:
38
Fiberglass Hot Sticks Sectional Sticks USDS
BLUE STRIPE® sectional disconnect sticks snap together to create custom length tools with interchangeable end fittings for specific applications. The compact nature of sectional sticks eliminates the need to store long single piece sticks.
The interchangeability of end sections makes sectional sticks versatile – eliminating the need for duplication of tools.
All sections are foam filled and tested per ASTM F-711 and OSHA.
BLUE STRIPE® Sectional Disconnect Sticks
UNIVERSALSPLINE
RUBBEREND CAP
NEMA SWITCH-HEAD
EXTENSIONSECTION
Snap On Adapters available on next page
Sectional Sticks USDS
USDS-???-XX
SE - Universal Spline
SH - NEMA Switch Head
DH - Disconnect Head
B - Base Section
E - Extension Section
Catalog Number
Length Weight Catalog Number
Length Weight
1¼” Diamenter 1½” DiamenterUSDS-002-XX 1¼” X 2’ 1 lb 9 oz USDS-H04-XX 1½” X 4’ 2 lb 4 oz
USDS-004-XX 1¼” X 4’ 2 lb 1 oz USDS-H06-XX 1½” X 6’ 3 lb 5 oz
USDS-006-XX 1¼” X 6’ 2 lb 14 oz USDS-H08-XX 1½” X 8’ 4 lb 6 oz
USDS-008-XX 1¼” X 8’ 3 lb 9 oz USDS-H10-XX 1½” X 10’ 5 lb 15 oz
Sectional Disconnect Sticks are available in either 1¼” or the heavy-duty 1½” dia.(H). All sticks are available with five end choices. See below for ordering instructions.
see chart above
41
Fiberglass Hot Sticks
40
Fiberglass Hot Sticks
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:HOW TO ORDER:
Snap On Adapters for Disconnect SticksThese snap on adapters are used in conjunction with our standard Sectional Disconnect Sticks.
Sectional Disconnect Storage Bags
MALE UNIVERSAL SPLINE
FEMALEBASE CAP
FEMALE UNIVERSAL SPLINE
MALEDISCONNECT HEAD
Catalog Number Description Catalog Number Description
USDS-OAM-SE 1¼” Dia. Male Universal Adapter USDS-HAM-SE 1½” Dia. Male Universal Adapter
USDS-OAF-SE 1¼” Dia. Female Universal Adapter USDS-HAF-SE 1½” Dia. Female Universal Adapter
USDS-OAF-EC 1¼” Dia. Series Cap USDS-HAF-EC 1½” Dia. Series Cap
USDS-OAM-DH 1¼” Dia. Male Disconnect Adapter USDS-HAM-DH 1½” Dia. Male Disconnect Adapter
Sectional Disconnect Storage Bags are water resistant, mold resistant and include folded end snap locks as well as a carrying strap.
Disconnect Stick Length One Pocket Case Two Pocket Case Three Pocket Case Four Pocket Case
2’ Length USDS-BAG-32 USDS-BAG-42
4’ Length USDS-BAG-14 USDS-BAG-24 USDS-BAG-34 USDS-BAG-44
6’ Length USDS-BAG-16 USDS-BAG-26 USDS-BAG-36 USDS-BAG-46
8’ Length USDS-BAG-18 USDS-BAG-28
10’ Length USDS-BAG-110
Snap on Adapters are Interchangeable on any corresponding 1¼” Dia and 1½” Dia Sectional Disconnect Sticks.
Snap on Adapters allow for the creation of double ended sectional sticks with multiple end attachments per the users required needs.
Sectional Sticks USDS
see charts above
Measuring Stick USTS-M
The BLUE STRIPE® Measuring Stick is our standard Telescopic Hot Stick with large, clear print running along side our patented BLUE STRIPE® feature. Available in English (EM) or Metric (MM) versions, this stick allows for easy and accurate measuring while still functioning as a normal telescoping hot stick.
Our Measuring Stick is the only round, telescoping hot stick available in EIGHT different sizes. Choose from 16’ to 50’, English or Metric versions.
Our epoxy resin and unique non-woven fiberglass construction creates a smoother surface that resists water absorption. Our CNC machined spline end and buttons will hold up to the rigors of daily use.
BLUE STRIPE® Measuring Sticks
ENGLISH METRIC SIZE CLOSED LENGTH
WEIGHT OPERATING LENGTHS
USTS-050-EM USTS-050-MM 50 ft. 15.2 m 68” 20 lb 50’,45’,40’,35’,30’
USTS-045-EM USTS-045-MM 45 ft. 13.7 m 66” 16 lb 8 oz 45’,40’,35’,30’,26’
USTS-040-EM USTS-040-MM 40 ft. 12.2 m 65” 13 lb 8 oz 40’,35’,30’,26’,21’
USTS-035-EM USTS-035-MM 35 ft. 10.6 m 63” 11 lb 35’,30’,26’,21’,17’
USTS-030-EM USTS-030-MM 30 ft. 9.1 m 62” 8 lb 14 oz 30’,26’,21’,17’
USTS-025-EM USTS-025-MM 25 ft. 7.6 m 60” 6 lb 14 oz 26’,21’,17’
USTS-020-EM USTS-020-MM 20 ft. 6.2 m 58” 5 lb 3 oz 21’,17’
USTS-016-EM USTS-016-MM 16 ft. 4.9 m 56” 4 lb 16’,12’
MM - Meters / CentimetersEM - Feet / Inches
see chart above
NEW
43
Fiberglass Hot Sticks
42
Fiberglass Hot Sticks
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:HOW TO ORDER:
All Utility Solutions straight sticks are manufactured from the highest quality electrical grade fiberglass. Wall thickness has been engineered to provide the utmost in mechanical strength to meet the rigors of in field pushing, pulling or twisting of stubborn equipment. Each stick interior is filled with a high performance closed cell foam to prevent water absorption. The stick exterior has been chemically sealed to provide a smooth surface texture for easy cleaning.
Utility Solutions straight sticks meet or exceed all applicable industry performance criteria including ASTM F711, ASTM F1826 and OSHA Sub. V sec. 1926.951(d).
BLUE STRIPE® Foam Filled Straight Sticks
Straight Sticks USSS
USSS
UNIVERSAL SPLINE(SE)
RUBBER END CAP(EC)
NEMA SWITCH-HEAD(SH)
DISCONNECT HEAD(DH)
DIAMETER LENGTH(4’,6’,8’,10’)
ENDS(choose two) Example
USSS-0 or H-1¼” or 1½”
04 or 06- 08 or 10-
EC - Rubber End CapSE - Universal Spline
SH - NEMA Switch-headDH - Disconnect Head
USSS-H08-EC/SE
USSS-XYY-ZZ/ZZEC - Rubber End CapSE - Universal SplineSH - NEMA Switch HeadDH - Disconnect Head
(CHOOSE TWO)can be the same two
O - 1¼” DiameterH - 1½” Diameter
04 - 4ft Length06 - 6ft Length08 - 8ft Length10 - 10ft Length
EXAMPLE: USSS-H08-EC/SE8’ 1½” Dia. Straight Stick with Endcap & Switchhead
Design Your Own!
Boom Holster USBC
Boom Holster
The Boom Holster is a unique, two-piece hot stick holder that easily mounts on a boom. The rugged molded design is spring loaded at one end so an operator can remove and insert a hot stick with just one hand.
Disconnect and NEMA Switch heads conveniently fit into a slot closest to the operator. The Boom Holster is a convenient and safe way to secure a hot stick.
Installation is quick and easy with 3 supplied straps, ratchets and rubber pads. It mounts on round, square, or oval booms of any size.
The Boom Holster can hold any length stick and adjusts to accommodate different sticks easily.
USBC-002
USBC-002 BOOM HOLSTER WITH STRAPS
Your Favorite Stick is always within reach!
44 45
Fiberglass Hot Sticks Fiberglass Hot Sticks
Lineman driven. Field proven.
UTILITYSOLUTIONS
™ Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER: HOW TO ORDER:
Product Dimensions: 8 1/3 ft. / 10 1/3 ft.Product Weight: 5 lb / 6 lb
The Utility Solutions Rescue Hook is designed to remove an injured worker from a hazardous situation including confined spaces, on or near electrical gear, or in vaults.
The hook portion is manufactured out of tempered steel and then powder-coated in high visibility safety yellow to resist corrosion and meets or exceeds ASTM F711.
The innovative design allows for the unit to ship as two separate components, resulting in substantial shipping savings without sacrificing strength or toughness.
BLUE STRIPE® Rescue Hook
USRH-006/8
USRH-006 RESCUE HOOK 6 FT.
USRH-008 RESCUE HOOK 8 FT.
Rescue Hook/ Storm Stick USRH/USSS
BLUE STRIPE® Severe Weather Stick
Severe Weather Sticks provide a lineman with extra protection during inclement weather. The tool consists of two rubber skirts added to the straight sticks that disrupt water from forming an electrical path along the stick, thereby improving the dielectric properties of the stick.
Available only in the universal spline end / rubber end cap configuration.
USSS
USSS-006-STORM 1¼” X 6’ STORM STICK
USSS-008-STORM 1¼” X 8’ STORM STICK
USSS-010-STORM 1¼” X 10’ STORM STICK
USSS-H06-STORM 1½” X 6’ STORM STICK
USSS-H08-STORM 1½” X 8’ STORM STICK
USSS-H10-STORM 1½” X 10’ STORM STICK
Extra Protection!
HOW TO ORDER:
Utility Solutions offers a complete line of fiberglass hot stick storage bags. Every bag is water resistant, mold resistant and incorporates a folded end snap lock.
Protective Bags for Fiberglass Sticks
Bags & Cases USSB/USBC
Protect Your Investment!
USSB
SIZE FITS
USSB-003 Protective Bag 6” X 36” USTS-004 thru USTS-012
USSB-005 Protective Bag 6” X 63” USSG-004, USSS-004, USTS-16 thru USTS-025
USSB-006 Protective Bag 8.5” X 75” USTS-030 thru USTS-050
USSB-007 Protective Bag 6” X 7’ USSG-006, USSS-006
USSB-009 Protective Bag 6” X 9’ USSG-008, USSS-008
USSB-011 Protective Bag 6” X 11’ USSG-010, USSS-010
Product Dimension: 4 “ x 4 “ x 32 “Product Weight: 4 lb 8 oz
The Utility Solutions bucket stick storage case will work with any size bucket sick on the market. Molded from tough waterproof blue polymer the bucket case conveniently clips to
the side of the bucket without the need to drill or otherwise modify the bucket. The cover is secured to the base to prevent accidental loss and drainage holes in the base provide rain drainage to ensure the interior stays dry. The cover/base design permits bucket stick storage without the need to rotate the hot stick probe end and permits one to grab the stick body when removing so as not to extend the stick.
Bucket Stick Storage Case
Convenient& Versatile!
USBC
See Chart Above
SIZE FITS
USBC-001 Bucket Storage Case
4” X 32” ALL 4’ thru 12’ BUCKET STICKS
47
Fiberglass Hot Sticks
46
Fiberglass Hot Sticks
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
Product Dimensions: ¼” Dia. x 18”Product Weight: 1 lb
The Spline Torque Bar allows an operator to apply increased torque at a safe distance to insulated shotgun stick applications (when equipped with a universal spline end).
Tool consists of foam filled insulated fiberglass with a foam grip for operator comfort. Specially designed universal end is precision CNC machined from aluminum grade bar stock for superior strength.
Spline Torque Bar
Stick Accessories
Hot Stick AccessoriesWe offer a wide range of hot stick accessories. All are tested and fit on a standard Universal Spline(SE).
Catalog Number
Name Weight Page
USSA-ETE 56” FIBERGLASS EXTENSION SPLINE ATTACHMENT 1 lb 35
USSA-ASD POLYMERIC ICE REMOVAL SPLINE ATTACHMENT 1 lb
USSA-BRH POLYMERIC REMOVAL HOOK SPLINE ATTACHMENT 4 oz
USSA-HGR PLASTISOL HANGER & CLAMP 4 oz
USSA-HOE HOE ATTACHMENT 8 oz
USSA-MSC SHOESTRING CUTTER SPLINE ATTACHMENT (METAL) 4 oz
USSA-ODP DOUBLE PRONG STICK END 4 oz
USSA-OEC RUBBER END CAP FOR 1 1/4” DIA. FIBERGLASS 4 oz
USSA-OHP UNIVERSAL HOTSTICK PROBE 8 oz
USSA-OHP-F UNIVERSAL HOTSTICK PROBE WITH HI VISIBILITY FLOURESCENT COATING
8 oz
USSA-ORB ROTARY BLADE SPLINE ATTACHMENT 4 oz
USSA-ORP ROTARY PRONG SPLINE ATTACHMENT 4 oz
USSA-OSE UNIVERSAL SPLINE END FOR 1 1/4” DIA. FIBERGLASS 6 oz
USSA-PSC SHOESTRING CUTTER SPLINE ATTACHMENT (PLASTIC) 4 oz not shown
USSA-STB-018 18” TORQUE BAR SPLINE ATTACHMENT 1 lb Below
USSA-TSA 1/4”-20 THREADED STUD SPLINE ADAPTER 4 oz
HAVE AN IDEA. . . NEED SOMETHING SPECIAL?We are constantly designing and engineering new tools and products for the electric power industry. Call or email us with YOUR ideas!
USSA
USSA-STB-018
Stick Accessories USSA
USSA-OHPUSSA-OEC USSA-OHP-F
USSA-ORPUSSA-ORB USSA-OSE
USSA-BRH USSA-ASD USSA-HGR
USSA-ODPUSSA-HOE USSA-MSC
USSA-TSA
49
Fiberglass Hot Sticks
48
Fiberglass Hot Sticks
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:HOW TO ORDER:
Size: 18” x 18” (approximately)
Microfiber silicone impregnated hot stick wiping cloth.
Our unique microfiber material both contains more silicone and traps more dirt, dust and debris. Our cloth comes with a durable clear bag that is resealable.
The BLUE STRIPE® Cloth imparts a clear protective film of silicone on a hot stick. It complies with the OSHA requirement of daily inspection and wiping of high voltage rated fiberglass hot sticks.
BLUE STRIPE® Cloth
Cleaning Supplies Cloth & Wipes
OSHA Requires Daily Inspection & Wiping of
Hot Sticks.
USTS-SILCLOTH
BLUE STRIPE® Wipes
Size: 8” x 12” Towel
Our daily hot sticks wipes are pre-moistened with silicone to leave behind a thin protective water repellent surface.
Perform a light cleaning and leave a thin layer of silicone on your hot stick every day to comply with OSHA requirements of daily inspection and wiping of high voltage rated fiberglass hot sticks.
Our BLUE STRIPE® Wipes come in our convenient dispenser box of 50 to mount on a wall.
USTS-SILWIPE
Convenient Dispenser Box Can Be Wall
Mounted!
USTS-CLOTH BLUE STRIPE® CLOTH
USTS-SILWIPE BLUE STRIPE® WIPES (BOX OF 50)
14 oz. cans
Our high grade Carnauba wax creates a high temperature, water resistant durable finish on fiberglass, gelcoat, painted metal and wood surfaces.
A good coat of Carnuba wax on any fiberglass product is recommended on a routine basis. Carnuba wax inherently repels water and dirt to optimize dielectric properties. Stay OSHA compliant and extend the life of your hot stick with our BLUE STRIPE® Hot Stick Wax.
BLUE STRIPE® Hot Stick Wax
Cleaning Supplies Wax & Cleaner
Create a High Temp, Water Resistant Finish!
USTS-WAX
BLUE STRIPE® General Purpose Cleaner
1 US Gallon as mixed
We have created a specially formulated neutral cleaner for tools, trucks, fiberglass, painted surfaces, rubber goods and most any non-absorbing surface.
USTS-CLEANER
Freight SavingShips Concentrated!
USTS-WAX BLUE STRIPE® HOT STICK WAX - 14oz CAN
USTS-CLEANER BLUE STRIPE® GENERAL PURPOSE CLEANER - 1 Gallon as mixed
Meter Grabber 52
Electric Meter Jumper Leads 53
Metering Products
Low Voltage Bypass Tool 54
53
Metering Products
52
Metering Products
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:HOW TO ORDER:
Product Dimensions: 6.8 “ dia. x 15.5 “Product weight: 2 lb 6 ozColor: Clear with water cooler blue tint
The Utility Solutions Meter Grabber is an indispensable tool for electric meter installation, removal or change-outs. The Meter Grabber provides superior protection from exploding meters due to faults.
Operator protection is paramount therefore the Meter Grabber has no metal components about the tools working end. Side slots permit venting during a fault. The working end of the tool provides a positive capture around the entire base, eliminating the chance of a dropped or broken meter as well as offering additional mechanical leverage when removing stubborn meters.
Molded of a rugged polymer the tool is rugged, lightweight and tinted to allow the operator to visually observe the entire
operation.
Meter Grabber
Safely Install and Remove ALL Electric Meters!
USMG
USMG-001 METER GRABBER
USMG-002 WITH ARC SHIELD RINGS
USMG-001-BAG CARRYING BAG FOR USMG-001
USMG-002-BAG CARRYING BAG FOR USMG-002
Meter Grabber USMG
Shown with optional arc shield foradditional operator safety. (USMG-002)
Optional carrying bag is constructed of heavy-duty water resistant fabric with a polymeric base.
WATCH
VIDEO
ONLINE!
Our Electric Meter Jumper Lead sets are a convenient and safe method to prevent a customer outage during a meter removal or change-out. They are constructed from #6 AWG highly flexible insulated copper.
The ferrule ends are machined of solid copper for utmost performance and beveled for easy push on installation. Simply push the meter lead end over the bypass horn and turn the knurled handle until the lead is tightly secured in place.
Leads are available with a 100 AMP breaker option (USJL-002). The resettable single pole 240 volt hydraulic breaker allows for added safety and protection of property.
USJL-001/002
USJL-001 ELECTRIC METER JUMPER LEADS - FERRULE END (SET OF TWO)
USJL-002 ELECTRIC METER JUMPER LEADS - FERRULE END WITH 100 AMP BREAKER (SET OF TWO)
USMG-001-BAG CARRYING BAG FOR USJL-001
Jumper Leads USJL
Ferrule End
Electric Meter Jumper
USJL-001
USJL-002
Optional carrying bag is constructed of heavy-duty water resistant fabric with a polymeric base.
54
Metering Products
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:
The Low Voltage Bypass Tool can be used as a portable switch to pick-up and drop secondary loads between a transformer and an electric meter. Includes #6 AWG highly flexible insulated copper cable with solid copper ferrule ends.
The resettable single pole 240 volt hydraulic breaker allows for safe load pick-up and load break operations. The Low Voltage Bypass Tool can be used to bypass liquid fuse holders that cannot be opened under load, as well as pick-up or drop load over secondary isolators.
Used with standard utility approved secondary cable connectors.
USJL-005 & 006
USJL-005 LOW VOLTAGE BYPASS TOOL - 100 AMP
USJL-006 LOW VOLTAGE BYPASS TOOL - 200 AMP
USMG-001-BAG CARRYING BAG FOR USJL-005 or USJL-006
Low Voltage Bypass Tool USJL
Low Voltage Bypass Tool
Optional Carrying Bag
Load-Trainer™ 56
Grounds Tester 58
Tool Demonstration Trailers 59
Safety & Training
57
Safety & Training
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:
56
Safety & Training
Load-Trainer™
Load-Trainer™ XFMR
TRAININGThe Load-Trainer™ is a fully functional electrical trainer that allows for the simula-tion of most distribution transformer connection schemes. This makes the Load-Trainer™ a valuable addition to any safety and training program.
The Load-Trainer™ transformer trainer & simulator has the capabil-ity to connect single-phase and the following types of three-phase transformers:
• Delta-Delta• Delta-Wye• Open Delta-Open Delta• Wye-Delta• Wye-Wye• Wye (one leg out)-Open Delta
SIMULATION Hidden toggle switches can be manipulated to introduce common infield problems at the time of installation or after the installation has been performed. Some of these include:• Low voltage bushing hook-ups
• Polarity• Back-feed• High side phasing• Open primary• Open secondary
Training = Safety!
XFMR-3BUSHING LOAD-TRAINER™ THREE BUSHING TRANSFORMER SIMULATOR
XFMR-4BUSHING LOAD-TRAINER™ FOUR BUSHING TRANSFORMER SIMULATOR
XFMR-PRM PHASE ROTATION METER
XFMR-LEADS ASSORTMENT OF EXTRA BANANA LEADS
XFMR-3BUSHING-PRL ADDITIONAL THREE BUSHING FRONT PANEL
XFMR-4BUSHING-PRL ADDITIONAL FOUR BUSHING FRONT PANEL
FLEXIBLE There are two Load-Trainer™ models. The XFMR-3BUSH-ING simulates low side voltage three bushing transformers. The XFMR-4BUSHING simulates low side voltage four bushing trans-formers. The XFMR-PRL option supplies an additional front panel that acts as a slave unit to the standard front panel. Note: 3BUSHING design does NOT permit open primary or open secondary simulation, only the 4BUSHING design.
The Load-Trainer™ transformer simulator and trainer is wheel por-table, compact and easily transported. The unit is powered using a conventional 110 VAC power outlet.
Load-Trainer™ XFMR
See Chart Above
59
Safety & Training
58
Safety & Training
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:HOW TO ORDER:
Product Dimension: 20 “ x 15 “ x 7.5 “Product Weight: 45 lbs
The USGT-600 Grounds Tester provides a straightforward means of evaluating in service grounding assemblies in compliance with ASTM standards. An in unit voltmeter allows the operator to determine pass/fail criteria of various lengths of cable sizes #2 through double 4/0.
REACH Technology saves time and eliminates guess work by troubleshooting failed grounding assemblies and isolating the failure location.
The USGT-600 Grounds Tester requires a120 Volt power supply. The device is contained in a rugged case and ships with both brass ball stud and brass flat head electrodes.
Grounds Tester
USGT-600
Grounds Tester USGT
Isolates Failure Location!
USGT-600 GROUNDS TESTER
USGT-600-15KVELBOW 15 kV LOAD BREAK ELBOW ADAPTER(FEMALE)
USGT-600-15KVBUSHING 15 kV LOAD BREAK BUSHING ADAPTER(MALE)
USGT-600-27KVELBOW 27 kV LOAD BREAK ELBOW ADAPTER (FEMALE)
USGT-600-27KVBUSHING 27 kV LOAD BREAK BUSHING ADAPTER(MALE)
USGT-600-SUB 3 1/8” OD SUBSTATION CLAMP ADAPTER
27 Kv ELBOWUSGT-600-27KVELBOW
27 Kv BUSHINGUSGT-600-27KVBUSHING
15 Kv ELBOWUSGT-600-15KVELBOW
15 Kv BUSHINGUSGT-600-15KVBUSHING SUBSTATION CLAMP
ADAPTER
ACCESSORY ADAPTERSAccessory adapters allow for the testing of assemblies with 15kV or 27kV load break elbow terminations, 15kV or 27kV bushing terminations and a 3 1/8” OD adapter for testing substation clamps.
Utility Solutions tool demonstration trailers provide an excellent means to evaluate hot line tools in a hands on setting. Utility Solutions periodically upgrades each of our trailers to reflect our constantly growing array
of products. Additionally our USGT-600 Grounds Tester and XFMR Load Trainer Transformer Simulator are fully functional (requires a 110 VAC power supply).
Trailers are located about the United States and Canada. Call your local sales representative to schedule a trailer visit at your earliest convenience.
Tool Demonstration Trailers
Hands on Demos Right in Your Parking Lot!
TRAILER CALL YOUR REPRESENTATIVE
Demonstration Trailers TRAILER
USI currently has 7 trailers throughout North America. Check our website for details.
Call your Rep for a Demo!
Insulated Rubber Blankets 62
Blanket Buttons 63
63Blanket Clamp
64Klondike Clamp
65Blanket Mate Heavy Duty Blanket Holder
68Bucket Mate Polymeric Hook
66Jumper Hook
67Jumper-Aid™
Rubber Goods
63
Rubber Goods
62
Rubber Goods
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:HOW TO ORDER:
Utility Solutions blankets meet or exceed all applicable ASTM D-1048 performance criteria. All blankets are Type II, manufactured from EDPM to provide maximum resistance to ozone damage. All blankets are Style A and free from any internal reinforcement for maximum flexibility. Utility Solutions blankets are molded in high visibility yellow color and every blanket is pre-tested at an independent NAIL certified laboratory to assure highest quality.
EVERY blanket is pre-tested and date stamped prior to shipping!
Insulated Rubber BlanketsPre-tested by
NAIL Approved Laboratory!
USRB
USRB-36-6-SLD 36” INSULATED RUBBER BLANKET - SOLID
USRB-36-28-SLT 36” INSULATED RUBBER BLANKET - SLOTTED
USRB-22-28-SLT 22” INSULATED RUBBER BLANKET - SLOTTED
Rubber Blankets USRB
CLASS SIZE DESIGN NO. EYES
WEIGHT
USRB-36-6-SLD 4 36” X 36” solid 6 8 lb 4 oz
USRB-36-28-SLT 4 36” X 36” slotted 28 8 lb 4 oz
USRB-22-28-SLT 4 22” x 22” slotted 28 2 lb 8 oz
Blanket Clamp
USBA-001 BLANKET CLAMP
USBA-002 BLANKET CLAMP - STICK OPERABLE
USBA-003 BLANKET BUTTONS
Blanket Clamps & Buttons USBA
USBA-001/002
USBA-001
USBA-002
Product Dimensions: 1“ dia. .75”Product Weight: 5 oz
Standard push button for installation of blankets that incorporate perimeter holes.
Blanket Buttons
USBA-003
Product Dimensions: 10 “ x 5 “ x .75 “Product Weight: 4 oz
USBA-001Hand operable Blanket Clamp.
USBA-002 Blanket Clamp designed for remote operation using a shotgun stick.
65
Rubber Goods
64
Rubber Goods
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:HOW TO ORDER:
The Klondike Clamp tool series quickly and safely secures blankets in position on poles without damaging the blankets. The Klondike Clamp tool series eliminates the need for tie wrap, bungee cords, Velcro®, tape or
any other means that are both time consuming to install and potentially damaging to the blanket.
The Klondike Clamp tool series can also be used in a myriad of pad mount equipment situations where it is difficult to secure the blanket by conventional means.
Molded from a tough weather resistant polymer and assembled completely with stainless steel hardware the Klondike Clamp tool series will provide a lineman with many years of maintenance free usage.
Klondike Clamp
Saves Time & Protects
Blankets!
USCP-001/002/003
USCP-001 6”-11” DIA. KLONDIKE CLAMP
USCP-002 11”-20” DIA. KLONDIKE CLAMP
USCP-003 6”-11” DIA. KLONDIKE CLAMP / SINGLE SPRING MECHANISM
Klondike Clamp USCP
USCP-001 USCP-002POLE RANGE 6” - 11” dia. 11” - 20” dia.
LENGTH 16” 23”
WEIGHT 8 oz 19 oz
USCP-001
USCP-002
The Blanket Mate Heavy Duty Blanket Holders solve the problem of safely and securely positioning a rubber insulating blanket. The tear drop shaped ends easily slide through the molded holes on a blanket. The strong, nearly indestructible Blanket Mate is quick and easy and protects both equipment and blankets.
Electrical insulating blankets come in many sizes and can weigh as much as 9 lbs. Choose from the USBM-001 6 magnet Blanket Mate or the USBM-002 8 magnet Blanket Mate, depending on what size blanket you need to secure.
All magnetic Blanket Mates are designed to conform to curved surfaces typically found on overhead apparatus and are manufactured from a unique polymer that remains strong and flexible even in cold weather.
This product comes with a 5 year unlimited warranty against breakage.
Blanket Mate Heavy Duty Blanket Holder
USBM-001/002
USBM-001 BLANKET MATE - 6 MAGNET
USBM-002 BLANKET MATE - 8 MAGNET
Blanket Mate USBM
Find it Hard to Position a
Blanket?
67
Rubber Goods
66
Rubber Goods
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:HOW TO ORDER:
Product Dimensions: 11” x 4.5” x .5”Product Weight: 6 oz
The Jumper Hook is designed to eliminate jumper clamp sag and prevent potential cross-phasing situations without the time consuming use of tape, bungee cords or rope. The Jumper Hook also minimizes a jumper clamp swaying in high wind conditions.
Simply hang multiple Jumper Hook units along the intended jumper clamp path and let the tool cradle the jumper clamp. Easily installed by a gloved hand or with a shotgun stick the Jumper Hook will fit over any class 2 or 3 line hose and
exhibits a flash-over resistance of over 50 kV.
The Jumper Hook is made of a high visibility polymer material that can handle the rigors of daily use even in cold temperatures.
Jumper Hook
USJH-001
Jumper Hook USJH
USJH-001 JUMPER HOOK (6 per pack)
No More Jumper Lead
Sag!
Product Dimensions: 14” x 10” x 1”Product Weight: 1 lb 3 oz
The patented USJH-002 Jumper-Aid™ is designed to support a jumper wire during construction, maintenance, or repairs. It is particularly useful when a jumper is required to be in the vicinity of a conductor of a different voltage/phase. The USJH-002 allows for the mechanical jumper and or conductor to be supported while wrapped in an insulating rubber blanket and or line hose while eliminating the need for rope or tape. The pivoting nature of the USJH-002 offers positive locking about the jumper/conductor. The USJH-002 is also a useful tool to prevent jumper “sag” about a cross arm.
Jumper-Aid™
USJH-002
Jumper-Aid™ USJH
USJH-002 JUMPER-AID™
68
Rubber Goods
Lineman driven. Field proven.
UTILITYSOLUTIONS
™p.828.323.8914 f.828.323.8410www.utilitysolutionsinc.com
HOW TO ORDER:
Product Dimensions: 6.5” x 6.5” x .5”Product Weight: 5 oz
Unlike conventional molded bucket hooks, the Bucket Mate is machined from high performance polymer and far more rugged than traditional PVC. Nearly indestructible, even in cold temperatures.
The Bucket Mate is double ended allowing the large hook to accept a tool bag, while the opposing smaller ½” end will accept blanket holes without damaging the blanket.
Designate USBM-004-W to specify the wider slot Bucket Mate that can accommodate the next generation of thicker insulated buckets.
This product comes with a 5 year unlimited warranty against breakage.
USBM-004 BUCKET MATE POLYMERIC HOOK
USBM-004-W WIDE SLOT BUCKET MATE POLYMERIC HOOK
Bucket Mate USBM
Bucket Mate Polymeric Hook
USBM-004/004-W Finally. . . A Bucket Hook Designed for Extreme
Temperatures and Abuse!
Fiberglass Hot Stick Part Lists 70
88Sales Representative Directory
Appendix
93Index
USBM-004 USBM-004-W
1½”
70 71
C-0
0836
C-0
0837
C-0
0839P-00
129
P-00
128
P-00
148
P-00
147
Butto
n &
Sprin
g As
sem
blie
s O
nly
Part
#
Com
plet
e Pl
ug A
ssem
blie
s (In
clud
es A
ppro
pria
te B
utto
n &
Sprin
g As
sem
bly)
Part
#
C-0
0586
Spl
ine
End
B-00
105
Thum
b Sc
rew
w/ C
aptiv
e W
ashe
r
(1) E
nd C
ap S
uppl
ied
w/ A
ppro
pria
te F
aste
ner S
crew
s(2
) Com
plet
e En
d Pl
ug A
ssem
blie
s Su
pplie
d w
/ App
ropr
iate
Cro
wn
Lock
Fas
tene
rs
NO
TES:
UST
S-00
4 4
FT. T
ELES
CO
PIC
BU
CKE
T ST
ICK
USS
A-O
HP
Hot
Stic
k Pr
obe
To O
rder
a C
ompl
ete
Set o
f UST
S-00
4 B
utto
ns &
Spr
ings
Spe
cify
UST
S-00
4-B
UTT
ON
-KIT
Rep
lace
men
t Fib
ergl
ass
Sect
ions
(Fib
ergl
ass
Onl
y)
B-00
140
Spl
ine
End
Fast
ener
All S
pare
Par
t Ord
ers
are
Subj
ect t
o a
$25.
00 M
inim
um O
rder
Fee
P-00
158
C-0
0836
C-0
0837
C-0
0838
C-0
0841
P-00
130
P-00
129
P-00
128
P-00
149
P-00
148
P-00
147
Butto
n &
Sprin
g As
sem
blie
s O
nly
Part
#
Com
plet
e Pl
ug A
ssem
blie
s (In
clud
es A
ppro
pria
te B
utto
n &
Sprin
g As
sem
bly)
Part
#
C-0
0586
Spl
ine
End
B-00
105
Thum
b Sc
rew
w/ C
aptiv
e W
ashe
r
(1) E
nd C
ap S
uppl
ied
w/ A
ppro
pria
te F
aste
ner S
crew
s(2
) Com
plet
e En
d Pl
ug A
ssem
blie
s Su
pplie
d w
/ App
ropr
iate
Cro
wn
Lock
Fas
tene
rs
NO
TES:
UST
S-00
6 6
FT. T
ELES
CO
PIC
BU
CKE
T ST
ICK
USS
A-O
HP
Hot
Stic
k Pr
obe
To O
rder
a C
ompl
ete
Set o
f UST
S-00
6 B
utto
ns &
Spr
ings
Spe
cify
UST
S-00
6-B
UTT
ON
-KIT
Rep
lace
men
t Fib
ergl
ass
Sect
ions
(Fib
ergl
ass
Onl
y)
B-00
140
Spl
ine
End
Fast
ener
All S
pare
Par
t Ord
ers
are
Subj
ect t
o a
$25.
00 M
inim
um O
rder
Fee
P-00
159
72 73
C-0
0836
C-0
0837
C-0
0838
C-0
0840
C-0
0843
P-00
131
P-00
130
P-00
129
P-00
128
P-00
150
P-00
149
P-00
148
P-00
147
Butto
n &
Sprin
g As
sem
blie
s O
nly
Part
#
Com
plet
e Pl
ug A
ssem
blie
s (In
clud
es A
ppro
pria
te B
utto
n &
Sprin
g As
sem
bly)
Part
#
C-0
0586
Spl
ine
End
B-00
105
Thum
b Sc
rew
w/ C
aptiv
e W
ashe
r
(1) E
nd C
ap S
uppl
ied
w/ A
ppro
pria
te F
aste
ner S
crew
s(2
) Com
plet
e En
d Pl
ug A
ssem
blie
s Su
pplie
d w
/ App
ropr
iate
Cro
wn
Lock
Fas
tene
rs
NO
TES:
UST
S-00
8 8
FT. T
ELES
CO
PIC
BU
CKE
T ST
ICK
USS
A-O
HP
Hot
Stic
k Pr
obe
To O
rder
a C
ompl
ete
Set o
f UST
S-00
8 B
utto
ns &
Spr
ings
Spe
cify
UST
S-00
8-B
UTT
ON
-KIT
Rep
lace
men
t Fib
ergl
ass
Sect
ions
(Fib
ergl
ass
Onl
y)
B-00
140
Spl
ine
End
Fast
ener
All S
pare
Par
t Ord
ers
are
Subj
ect t
o a
$25.
00 M
inim
um O
rder
Fee
P-00
160
C-0
0836
C-0
0837
C-0
0838
C-0
0840
C-0
0842
C-0
0845
P-00
132
P-00
131
P-00
130
P-00
129
P-00
128
P-00
151
P-00
150
P-00
149
P-00
148
P-00
147
Butto
n &
Sprin
g As
sem
blie
s O
nly
Part
#
Com
plet
e Pl
ug A
ssem
blie
s (In
clud
es A
ppro
pria
te B
utto
n &
Sprin
g As
sem
bly)
Part
#
C-0
0586
Spl
ine
End
B-00
105
Thum
b Sc
rew
w/ C
aptiv
e W
ashe
r
(1) E
nd C
ap S
uppl
ied
w/ A
ppro
pria
te F
aste
ner S
crew
s(2
) Com
plet
e En
d Pl
ug A
ssem
blie
s Su
pplie
d w
/ App
ropr
iate
Cro
wn
Lock
Fas
tene
rs
NO
TES:
UST
S-01
0 10
FT.
TEL
ESC
OPI
C B
UC
KET
STIC
K
USS
A-O
HP
Hot
Stic
k Pr
obe
To O
rder
a C
ompl
ete
Set o
f UST
S-01
0 B
utto
ns &
Spr
ings
Spe
cify
UST
S-01
0-B
UTT
ON
-KIT
Rep
lace
men
t Fib
ergl
ass
Sect
ions
(Fib
ergl
ass
Onl
y)
B-00
140
Spl
ine
End
Fast
ener
All S
pare
Par
t Ord
ers
are
Subj
ect t
o a
$25.
00 M
inim
um O
rder
Fee
P-00
161
74 75
C-0
0836
C-0
0837
C-0
0838
C-0
0840
C-0
0842
C-0
0844
P-00
133
P-00
132
P-00
131
P-00
130
P-00
129
P-00
128
P-00
152
P-00
151
P-00
150
P-00
149
P-00
148
P-00
147
Butto
n &
Sprin
g As
sem
blie
s O
nly
Part
#
Com
plet
e Pl
ug A
ssem
blie
s (In
clud
es A
ppro
pria
te B
utto
n &
Sprin
g As
sem
bly)
Part
#
C-0
0586
Spl
ine
End
B-00
105
Thum
b Sc
rew
w/ C
aptiv
e W
ashe
r
(1) E
nd C
ap S
uppl
ied
w/ A
ppro
pria
te F
aste
ner S
crew
s(2
) Com
plet
e En
d Pl
ug A
ssem
blie
s Su
pplie
d w
/ App
ropr
iate
Cro
wn
Lock
Fas
tene
rs
NO
TES:
UST
S-01
2 12
FT.
TEL
ESC
OPI
C B
UC
KET
STIC
K
USS
A-O
HP
Hot
Stic
k Pr
obe
To O
rder
a C
ompl
ete
Set o
f UST
S-01
2 B
utto
ns &
Spr
ings
Spe
cify
UST
S-01
2-B
UTT
ON
-KIT
Rep
lace
men
t Fib
ergl
ass
Sect
ions
(Fib
ergl
ass
Onl
y)
B-00
140
Spl
ine
End
Fast
ener
All S
pare
Par
t Ord
ers
are
Subj
ect t
o a
$25.
00 M
inim
um O
rder
Fee
C-0
0846
P-00
162
C-0
0610
C-0
0620
C-0
0630
C-0
0641
P-00
130
P-00
129
P-00
128
P-00
127
P-00
149
P-00
148
P-00
147
P-00
157
Butto
n &
Sprin
g As
sem
blie
s O
nly
Part
#
Com
plet
e Pl
ug A
ssem
blie
s (In
clud
es A
ppro
pria
te B
utto
n &
Sprin
g As
sem
bly)
Part
#
C-0
0586
Spl
ine
End
B-00
105
Thum
b Sc
rew
w/ C
aptiv
e W
ashe
r
(1) E
nd C
ap S
uppl
ied
w/ A
ppro
pria
te F
aste
ner S
crew
s(2
) Com
plet
e En
d Pl
ug A
ssem
blie
s Su
pplie
d w
/ App
ropr
iate
Cro
wn
Lock
Fas
tene
rs
NO
TES:
UST
S-01
6 16
FT.
TEL
ESC
OPI
C S
TIC
K
USS
A-O
HP
Hot
Stic
k Pr
obe
To O
rder
a C
ompl
ete
Set o
f UST
S-01
6 B
utto
ns &
Spr
ings
Spe
cify
UST
S-01
6-B
UTT
ON
-KIT
(3) P
-001
57 &
P-0
0127
Incl
ude
Tip
Lock
Plu
g R
emov
al T
ool
Rep
lace
men
t Fib
ergl
ass
Sect
ions
(Fib
ergl
ass
Onl
y)
B-00
140
Spl
ine
End
Fast
ener
All S
pare
Par
t Ord
ers
are
Subj
ect t
o a
$25.
00 M
inim
um O
rder
Fee
P-00
159
76 77
C-0
0610
C-0
0620
C-0
0630
C-0
0640
C-0
0651
P-00
131
P-00
130
P-00
129
P-00
128
P-00
127
P-00
150
P-00
149
P-00
148
P-00
147
P-00
157
Butto
n &
Sprin
g As
sem
blie
s O
nly
Part
#
Com
plet
e Pl
ug A
ssem
blie
s (In
clud
es A
ppro
pria
te B
utto
n &
Sprin
g As
sem
bly)
Part
#
C-0
0586
Spl
ine
End
B-00
105
Thum
b Sc
rew
w/ C
aptiv
e W
ashe
r
(1) E
nd C
ap S
uppl
ied
w/ A
ppro
pria
te F
aste
ner S
crew
s(2
) Com
plet
e En
d Pl
ug A
ssem
blie
s Su
pplie
d w
/ App
ropr
iate
Cro
wn
Lock
Fas
tene
rs
NO
TES:
UST
S-02
0 20
FT.
TEL
ESC
OPI
C S
TIC
K
USS
A-O
HP
Hot
Stic
k Pr
obe
To O
rder
a C
ompl
ete
Set o
f UST
S-02
0 B
utto
ns &
Spr
ings
Spe
cify
UST
S-02
0-B
UTT
ON
-KIT
(3) P
-001
57 &
P-0
0127
Incl
ude
Tip
Lock
Plu
g R
emov
al T
ool
Rep
lace
men
t Fib
ergl
ass
Sect
ions
(Fib
ergl
ass
Onl
y)
B-00
140
Spl
ine
End
Fast
ener
All S
pare
Par
t Ord
ers
are
Subj
ect t
o a
$25.
00 M
inim
um O
rder
Fee
P-00
160
C-0
0610
C-0
0620
C-0
0630
C-0
0640
C-0
0650
C-0
0661
P-00
132
P-00
131
P-00
130
P-00
129
P-00
128
P-00
127
P-00
151
P-00
150
P-00
149
P-00
148
P-00
147
P-00
157
Butto
n &
Sprin
g As
sem
blie
s O
nly
Part
#
Com
plet
e Pl
ug A
ssem
blie
s (In
clud
es A
ppro
pria
te B
utto
n &
Sprin
g As
sem
bly)
Part
#
C-0
0586
Spl
ine
End
B-00
105
Thum
b Sc
rew
w/ C
aptiv
e W
ashe
r
(1) E
nd C
ap S
uppl
ied
w/ A
ppro
pria
te F
aste
ner S
crew
s(2
) Com
plet
e En
d Pl
ug A
ssem
blie
s Su
pplie
d w
/ App
ropr
iate
Cro
wn
Lock
Fas
tene
rs
NO
TES:
UST
S-02
5 25
FT.
TEL
ESC
OPI
C S
TIC
K
USS
A-O
HP
Hot
Stic
k Pr
obe
To O
rder
a C
ompl
ete
Set o
f UST
S-02
5 B
utto
ns &
Spr
ings
Spe
cify
UST
S-02
5-B
UTT
ON
-KIT
(3) P
-001
57 &
P-0
0127
Incl
ude
Tip
Lock
Plu
g R
emov
al T
ool
Rep
lace
men
t Fib
ergl
ass
Sect
ions
(Fib
ergl
ass
Onl
y)
B-00
140
Spl
ine
End
Fast
ener
All S
pare
Par
t Ord
ers
are
Subj
ect t
o a
$25.
00 M
inim
um O
rder
Fee
P-00
161
78 79
C-0
0610
C-0
0620
C-0
0630
C-0
0640
C-0
0650
C-0
0660
P-00
133
P-00
132
P-00
131
P-00
130
P-00
129
P-00
128
P-00
127
P-00
152
P-00
151
P-00
150
P-00
149
P-00
148
P-00
147
P-00
157
Butto
n &
Sprin
g As
sem
blie
s O
nly
Part
#
Com
plet
e Pl
ug A
ssem
blie
s (In
clud
es A
ppro
pria
te B
utto
n &
Sprin
g As
sem
bly)
Part
#
C-0
0586
Spl
ine
End
B-00
105
Thum
b Sc
rew
w/ C
aptiv
e W
ashe
r
(1) E
nd C
ap S
uppl
ied
w/ A
ppro
pria
te F
aste
ner S
crew
s(2
) Com
plet
e En
d Pl
ug A
ssem
blie
s Su
pplie
d w
/ App
ropr
iate
Cro
wn
Lock
Fas
tene
rs
NO
TES:
UST
S-03
0 30
FT.
TEL
ESC
OPI
C S
TIC
K
USS
A-O
HP
Hot
Stic
k Pr
obe
To O
rder
a C
ompl
ete
Set o
f UST
S-03
0 B
utto
ns &
Spr
ings
Spe
cify
UST
S-03
0-B
UTT
ON
-KIT
(3) P
-001
57 &
P-0
0127
Incl
ude
Tip
Lock
Plu
g R
emov
al T
ool
Rep
lace
men
t Fib
ergl
ass
Sect
ions
(Fib
ergl
ass
Onl
y)
B-00
140
Spl
ine
End
Fast
ener
All S
pare
Par
t Ord
ers
are
Subj
ect t
o a
$25.
00 M
inim
um O
rder
Fee
C-0
0671
P-00
162
C-0
0610
C-0
0620
C-0
0630
C-0
0640
C-0
0650
C-0
0660
C-0
0670
C-0
0681
P-00
134
P-00
133
P-00
132
P-00
131
P-00
130
P-00
129
P-00
128
P-00
127
P-00
153
P-00
152
P-00
151
P-00
150
P-00
149
P-00
148
P-00
147
P-00
157
Butto
n &
Sprin
g As
sem
blie
s O
nly
Part
#
Com
plet
e Pl
ug A
ssem
blie
s (In
clud
es A
ppro
pria
te B
utto
n &
Sprin
g As
sem
bly)
Part
#
C-0
0586
Spl
ine
End
B-00
105
Thum
b Sc
rew
w/ C
aptiv
e W
ashe
r
P-00
163
(1) E
nd C
ap S
uppl
ied
w/ A
ppro
pria
te F
aste
ner S
crew
s(2
) Com
plet
e En
d Pl
ug A
ssem
blie
s Su
pplie
d w
/ App
ropr
iate
Cro
wn
Lock
Fas
tene
rs
NO
TES:
UST
S-03
5 35
FT.
TEL
ESC
OPI
C S
TIC
K
USS
A-O
HP
Hot
Stic
k Pr
obe
To O
rder
a C
ompl
ete
Set o
f UST
S-03
5 B
utto
ns &
Spr
ings
Spe
cify
UST
S-03
5-B
UTT
ON
-KIT
(3) P
-001
57 &
P-0
0127
Incl
ude
Tip
Lock
Plu
g R
emov
al T
ool
Rep
lace
men
t Fib
ergl
ass
Sect
ions
(Fib
ergl
ass
Onl
y)
B-00
140
Spl
ine
End
Fast
ener
All S
pare
Par
t Ord
ers
are
Subj
ect t
o a
$25.
00 M
inim
um O
rder
Fee
80 81
C-0
0610
C-0
0620
C-0
0630
C-0
0640
C-0
0650
C-0
0660
C-0
0670
C-0
0680
C-0
0691
P-00
135
P-00
134
P-00
133
P-00
132
P-00
131
P-00
130
P-00
129
P-00
128
P-00
127
P-00
154
P-00
153
P-00
152
P-00
151
P-00
150
P-00
149
P-00
148
P-00
147
P-00
157
Butto
n &
Sprin
g As
sem
blie
s O
nly
Part
#
Com
plet
e Pl
ug A
ssem
blie
s (In
clud
es A
ppro
pria
te B
utto
n &
Sprin
g As
sem
bly)
Part
#
C-0
0586
Spl
ine
End
B-00
105
Thum
b Sc
rew
w/ C
aptiv
e W
ashe
r
P-00
164
(1) E
nd C
ap S
uppl
ied
w/ A
ppro
pria
te F
aste
ner S
crew
s(2
) Com
plet
e En
d Pl
ug A
ssem
blie
s Su
pplie
d w
/ App
ropr
iate
Cro
wn
Lock
Fas
tene
rs
NO
TES:
UST
S-04
0 40
FT.
TEL
ESC
OPI
C S
TIC
K
USS
A-O
HP
Hot
Stic
k Pr
obe
To O
rder
a C
ompl
ete
Set o
f UST
S-04
0 B
utto
ns &
Spr
ings
Spe
cify
UST
S-04
0-B
UTT
ON
-KIT
(3) P
-001
57 &
P-0
0127
Incl
ude
Tip
Lock
Plu
g R
emov
al T
ool
Rep
lace
men
t Fib
ergl
ass
Sect
ions
(Fib
ergl
ass
Onl
y)
B-00
140
Spl
ine
End
Fast
ener
All S
pare
Par
t Ord
ers
are
Subj
ect t
o a
$25.
00 M
inim
um O
rder
Fee
C-0
0610
C-0
0620
C-0
0630
C-0
0640
C-0
0650
C-0
0660
C-0
0670
C-0
0680
C-0
0690
C-0
0701
P-00
136
P-00
135
P-00
134
P-00
133
P-00
132
P-00
131
P-00
130
P-00
129
P-00
128
P-00
127
P-00
155
P-00
154
P-00
153
P-00
152
P-00
151
P-00
150
P-00
149
P-00
148
P-00
147
P-00
157
Butto
n &
Sprin
g As
sem
blie
s O
nly
Part
#
Com
plet
e Pl
ug A
ssem
blie
s (In
clud
es A
ppro
pria
te B
utto
n &
Sprin
g As
sem
bly)
Part
#
C-0
0586
Spl
ine
End
B-00
105
Thum
b Sc
rew
w/ C
aptiv
e W
ashe
r
P-00
165
(1) E
nd C
ap S
uppl
ied
w/ A
ppro
pria
te F
aste
ner S
crew
s(2
) Com
plet
e En
d Pl
ug A
ssem
blie
s Su
pplie
d w
/ App
ropr
iate
Cro
wn
Lock
Fas
tene
rs
NO
TES:
UST
S-04
5 45
FT.
TEL
ESC
OPI
C S
TIC
K
USS
A-O
HP
Hot
Stic
k Pr
obe
To O
rder
a C
ompl
ete
Set o
f UST
S-04
5 B
utto
ns &
Spr
ings
Spe
cify
UST
S-04
5-B
UTT
ON
-KIT
(3) P
-001
57 &
P-0
0127
Incl
ude
Tip
Lock
Plu
g R
emov
al T
ool
Rep
lace
men
t Fib
ergl
ass
Sect
ions
(Fib
ergl
ass
Onl
y)
B-00
140
Spl
ine
End
Fast
ener
All S
pare
Par
t Ord
ers
are
Subj
ect t
o a
$25.
00 M
inim
um O
rder
Fee
82 83
C-0
0610
C-0
0620
C-0
0630
C-0
0640
C-0
0650
C-0
0660
C-0
0670
C-0
0680
C-0
0690
C-0
0700
C-0
0710
P-00
137
P-00
136
P-00
135
P-00
134
P-00
133
P-00
132
P-00
131
P-00
130
P-00
129
P-00
128
P-00
127
P-00
156
P-00
155
P-00
154
P-00
153
P-00
152
P-00
151
P-00
150
P-00
149
P-00
148
P-00
147
P-00
157
Butto
n &
Sprin
g As
sem
blie
s O
nly
Part
#
Com
plet
e Pl
ug A
ssem
blie
s (In
clud
es A
ppro
pria
te B
utto
n &
Sprin
g As
sem
bly)
Part
#
C-0
0586
Spl
ine
End
B-00
105
Thum
b Sc
rew
w/ C
aptiv
e W
ashe
r
P-00
166
(1) E
nd C
ap S
uppl
ied
w/ A
ppro
pria
te F
aste
ner S
crew
s(2
) Com
plet
e En
d Pl
ug A
ssem
blie
s Su
pplie
d w
/ App
ropr
iate
Cro
wn
Lock
Fas
tene
rs
NO
TES:
UST
S-05
0 50
FT.
TEL
ESC
OPI
C S
TIC
K
USS
A-O
HP
Hot
Stic
k Pr
obe
To O
rder
a C
ompl
ete
Set o
f UST
S-05
0 B
utto
ns &
Spr
ings
Spe
cify
UST
S-05
0-B
UTT
ON
-KIT
(3) P
-001
57 &
P-0
0127
Incl
ude
Tip
Lock
Plu
g R
emov
al T
ool
Rep
lace
men
t Fib
ergl
ass
Sect
ions
(Fib
ergl
ass
Onl
y)
B-00
140
Spl
ine
End
Fast
ener
All S
pare
Par
t Ord
ers
are
Subj
ect t
o a
$25.
00 M
inim
um O
rder
Fee
CO
MM
ON
REP
AIR
PAR
TS F
OR
USI
EXT
ERN
AL R
OD
SH
OTG
UN
STI
CK
All S
pare
Par
t Ord
ers
are
Subj
ect t
o a
$25.
00 M
inim
um O
rder
Fee
67
81
2 35
4
109
13
12 11
No.
Indi
vidu
al P
art D
escr
iptio
nPa
rt N
o.1
Bras
s Bu
tton
C-0
0335
2Sh
otgu
n Bu
tton
Sprin
gB-
0049
53
10-3
2 Sh
ould
er B
olt
B-00
861
410
-32
Lock
Nut
B-00
860
5M
olde
d Bl
ue H
andl
eC
-003
256
Rel
ease
Lev
erC
-010
557
1/8"
x 3
/4" R
oll P
inB-
0051
68
Leve
r Spr
ing
B-00
013
9R
ack
Stop
C-0
0321
1010
-24
x 1/
4" U
nder
cut F
HM
SB-
0055
111
Han
ger A
ssem
bly
w/ A
ttach
men
t Cla
mp
USS
A-H
GR
12Sp
line
End
Asse
mbl
yU
SSA-
OSE
1 1/
4" R
ubbe
r End
Cap
USS
A-O
EC
Com
plet
e As
sem
bly
Indi
vidu
al P
arts
No.
Com
plet
e As
sem
bly
Des
crip
tion
Part
No.
AEx
tern
al R
od S
hotg
un S
tick
Ope
ratin
g R
od A
ssem
bly
P-00
169
BEx
tern
al R
od S
hotg
un S
tick
Han
dle
Asse
mbl
y
Part
No.
P-00
170
Part
No.
P-00
171
P-00
168
Part
No.
P-00
172
B1
23
45
67
8
A
USS
G-0
04-E
R**
USS
G-0
06-E
R**
USS
G-0
08-E
R**
USS
G-0
10-E
R**
(PER
TAIN
S TO
SH
OTG
UN
STI
CKS
WIT
H D
ESIG
NAT
ION
: USS
G-*
**-E
R**
)
Rev
2.2
: 5/4
/12
13Sh
otgu
n H
ook
Asse
mbl
yC
-003
20
14
14H
ange
r w/ A
ttach
men
t Cla
mp
USS
A-H
GR
84 85
CO
MM
ON
REP
AIR
PAR
TS F
OR
USI
INTE
RN
AL R
OD
SH
OTG
UN
STI
CK
All S
pare
Par
t Ord
ers
are
Subj
ect t
o a
$25.
00 M
inim
um O
rder
Fee
67
81
2 35
4
109
13
11
No.
Indi
vidu
al P
art D
escr
iptio
nPa
rt N
o.1
Bras
s Bu
tton
C-0
0335
2Sh
otgu
n Bu
tton
Sprin
gB-
0049
53
10-3
2 Sh
ould
er B
olt
B-00
861
410
-32
Lock
Nut
B-00
860
5M
olde
d Bl
ue H
andl
eC
-003
256
Rel
ease
Lev
erC
-010
557
1/8"
x 3
/4" R
oll P
inB-
0051
68
Leve
r Spr
ing
B-00
013
9R
ack
Stop
C-0
0321
1010
-24
x 1/
4" U
nder
cut F
HM
SB-
0055
111 12
Splin
e En
d As
sem
bly
USS
A-O
SE1
1/4"
Rub
ber E
nd C
apU
SSA-
OEC
Com
plet
e As
sem
bly
Indi
vidu
al P
arts
No.
Com
plet
e As
sem
bly
Des
crip
tion
Part
No.
AIR
Sho
tgun
Stic
k O
pera
ting
Rod
Ass
embl
yP-
0017
3B
Shot
gun
Han
dle
Asse
mbl
y
Part
No.
P-00
174
Part
No.
P-00
175
P-00
168
Part
No.
P-00
176
B1
23
45
67
8
A
USS
G-0
04-IR
**U
SSG
-006
-IR**
USS
G-0
08-IR
**U
SSG
-010
-IR**
(PER
TAIN
S TO
SH
OTG
UN
STI
CKS
WIT
H D
ESIG
NAT
ION
: USS
G-*
**-IR
**)
Rev
2.2
: 5/4
/12
12
13Sh
otgu
n H
ook
Asse
mbl
yC
-003
20
14
14H
ange
r w/ A
ttach
men
t Cla
mp
USS
A-H
GR
16
1517
155/
16"-1
8 Fu
lly T
hrea
ded
Stud
B-00
302
16In
tern
al O
pera
ting
Rod
Cou
plin
gC
-004
5517
Cle
ar In
tern
al R
od S
lot C
over
C-0
0456
CO
MM
ON
REP
AIR
PAR
TS F
OR
USI
BBH
INTE
RN
AL R
OD
SH
OTG
UN
STI
CK
All S
pare
Par
t Ord
ers
are
Subj
ect t
o a
$25.
00 M
inim
um O
rder
Fee
67
81
2 35
4
109
13
11
No.
Indi
vidu
al P
art D
escr
iptio
nPa
rt N
o.1
Bras
s Bu
tton
C-0
0335
2Sh
otgu
n Bu
tton
Sprin
gB-
0049
53
10-3
2 Sh
ould
er B
olt
B-00
861
410
-32
Lock
Nut
B-00
860
5M
olde
d Bl
ue H
andl
eC
-003
256
Rel
ease
Lev
erC
-010
557
1/8"
x 3
/4" R
oll P
inB-
0051
68
Leve
r Spr
ing
B-00
013
9R
ack
Stop
C-0
0321
1010
-24
x 1/
4" U
nder
cut F
HM
SB-
0055
111 12
Splin
e En
d As
sem
bly
USS
A-O
SER
ubbe
r End
Cap
USS
A-O
EC
Com
plet
e As
sem
bly
Indi
vidu
al P
arts
No.
Com
plet
e As
sem
bly
Des
crip
tion
Part
No.
ABB
H IR
Sho
tgun
Stic
k O
pera
ting
Rod
Ass
embl
yP-
0017
7B
Shot
gun
Han
dle
Asse
mbl
y
Part
No.
P-00
178
Part
No.
P-00
179
P-00
168
Part
No.
P-00
180
B1
23
45
67
8
A
USS
G-0
04-IR
**-B
BHU
SSG
-006
-IR**
-BBH
USS
G-0
08-IR
**-B
BHU
SSG
-010
-IR**
-BBH
(PER
TAIN
S TO
SH
OTG
UN
STI
CKS
WIT
H D
ESIG
NAT
ION
: USS
G-*
**-IR
**-B
BH)
Rev
2.2
: 5/4
/12
12
13Sh
otgu
n H
ook
Asse
mbl
yC
-003
20
14
14H
ange
r w/ A
ttach
men
t Cla
mp
USS
A-H
GR
16
1517
155/
16"-1
8 Fu
lly T
hrea
ded
Stud
B-00
302
16In
tern
al O
pera
ting
Rod
Cou
plin
gC
-004
5517
Cle
ar In
tern
al R
od S
lot C
over
C-0
0456
87
Sales Representative Directory
Lineman driven. Field proven.
UTILITYSOLUTIONS
™
ALABAMAALL PRODUCT LINES
UTILITY-SPECIALISTS INC.3908 CYPRESS DRIVE
BIRMINGHAM, AL 35243(205) 967-4602
FAX: (205) 967-4673www.utility-specialists.com
ALASKA
ALL PRODUCT LINESHEES ENTERPRISES
#1 12TH STREET, SUITE #15ASTORIA, OR 97103
(503) 325-8778FAX: (503) 325-2467
www.heesenterprises.com
ARIZONAALL PRODUCT LINES
SOURCEWEST ELECTRICAL SALESPO BOX 13080
CHANDLER, AZ 85249(480) 699-9013
Fax: (480) 699-9014www.sourcewestsales.com
ARKANSASALL PRODUCT LINES
SOUTHERN UTILITY SALES AGENCYPO BOX 816
PASS CHRISTIAN, MS 39571-0816(228) 452-6235
FAX (888) 492-9322www.susallc.com
CALIFORNIA -NORTHALL PRODUCT LINES
ISBERG-NOTT COMPANY4725 FIRST STREET #265PLEASANTON, CA 94566
(925) 426-4718FAX: (925) 426-0323www.isberg-nott.com
CALIFORNIA – SOUTHALL PRODUCT LINES
M.A. HANSON & SON, LLC409 BEVERLY DRIVEREDLANDS, CA 92373
(909) 593-7109FAX: (909) 593-9311www.mahanson.com
CANADA – ALBERTAALL PRODUCT LINES
MARTIN ELECTRICAL SERVICES1319 – 54TH STREET
EDMONTON, AB T6L 2A7(780) 463-1626
FAX: (780) 485-1704
CANADA – BCALL PRODUCT LINESHALLWOOD MILHAM
TECHNOLOGIESUNIT 206-669 RIDLEY PLACE
DELTA, BC V3M 6Y9(604) 526-4288
FAX: (604) 526-1850www.hmti.ca
CANADA – MARITIME PROVINCESALL PRODUCT LINES
PEFCO ONTARIO1734 FINCH AVENUE
PICKERING, ON L1V 1K4(905) 427-9294
FAX: (905) 427-0540
CANADA – ONTARIOALL PRODUCT LINES
PEFCO ONTARIO1734 FINCH AVENUE
PICKERING, ON L1V 1K4(905) 427-9294
FAX: (905) 427-0540
CANADA – QUEBECALL PRODUCT LINES
LIMOTRIQUE175 RUE OLEG-STANEK
SHERBROOKE, QC J1L 2V4(819) 564-4410
FAX: (819) 564-2227www.limotrique.com
COLORADOALL PRODUCT LINES
VIKING UTILITY SALES, INC.894 N. CASTLEWOOD CANYON RD
FRANKTOWN, CO 80116(303) 660-6899
FAX: (303) 663-7366www.viking-sales.com
CONNECTICUTALL PRODUCT LINES
LVA SALES56 HARVESTER AVENUE
BATAVIA, NY 14020(585) 201-7040
FAX: (585) 219-5859www.lvasales.com
DELAWAREALL PRODUCT LINES
J.B. Sales Company7957 INDUSTRIAL PARK ROAD
EASTON, MD 21601(410) 822-9611
FAX: (410) 822-8358www.jbsales.com
DISTRICT OF COLUMBIA ALL PRODUCT LINES J.B. SALES COMPANY
7957 INDUSTRIAL PARK ROADEASTON, MD 21601
(410) 822-9611FAX: (410) 822-8358
www.jbsales.com
88 89
UTILITY SOLUTIONS SALES REPRESENTATIVE DIRECTORYUNITED STATES
FLORIDAALL PRODUCT LINES
UTILITY-SPECIALISTS INC.3908 CYPRESS DRIVE
BIRMINGHAM, AL 35243(205) 967-4602
FAX: (205) 967-4673www.utility-specialists.com
GEORGIAALL PRODUCT LINES
UTILITY-SPECIALISTS INC.3908 CYPRESS DRIVE
BIRMINGHAM, AL 35243(205) 967-4602
FAX: (205) 967-4673www.utility-specialists.com
HAWAIIALL PRODUCT LINESHEES ENTERPRISES
#1 12TH STREET, SUITE #15ASTORIA, OR 97103
(503) 325-8778FAX: (503) 325-2467
www.heesenterprises.com
IDAHO -NORTHALL PRODUCT LINESHEES ENTERPRISES
#1 12TH STREET, SUITE #15ASTORIA, OR 97103
(503) 325-8778FAX: (503) 325-2467
www.heesenterprises.com
IDAHO -SOUTHALL PRODUCT LINES
CONELY ENGINEERING CO.2066 WEST 2300 SOUTH
SALT LAKE CITY, UT 84119(801) 972-5923
FAX: (801) 972-5952
ILLINOIS – NORTHALL PRODUCT LINES
MIDWEST ELECT. RESOURCESN109 ERIN ROAD
OCONOMOWOC, WI 53066(920) 474-3504
FAX: (630) 778-9822www.mwelecres.com
ILLINOIS – SOUTHALL PRODUCT LINES
POWER EQUIPMENT SALES1507 LAKE AVENUE
KANSAS CITY, KS 66103(913) 384-3848
FAX: (913) 384-5097 www.powerequipsales.com
MARYLANDALL PRODUCT LINESJ.B. SALES COMPANY
7957 INDUSTRIAL PARK ROAD EASTON, MD 21601
(410) 822-9611FAX: (410) 822-8358
www.jbsales.com
MASSACHUSETTSALL PRODUCT LINES
LVA SALES56 HARVESTER AVENUE
BATAVIA, NY 14020(585) 201-7040
FAX: (585) 219-5859www.lvasales.com
MEXICOALL PRODUCT LINES
MAYECEN S.A. DE C.V.ANGEL GARCIA ABURTO NO. 364COL. BALDERRAMA, C.P. 83180
HERMOSILLO SONORA, MEXICO001 52 - (662) 260-2080 EXT. 113
FAX: 52- (662) 260-2035www.mayecen.com
MICHIGANALL PRODUCT LINES
GAR-NET ASSOCIATES, INC.4160 BRIARHILL DRIVE
MILAN, MI 48160(734) 434-8868
FAX: (734) 434-5663
MINNESOTAALL PRODUCT LINES
LEE NOONAN COMPANY 2230 COUNTRY ROAD H2 MOUNDS VIEW, MN 55112
(763) 560-1228 Fax: (763) 560-3282www.leenoonan.com
MISSISSIPPIALL PRODUCT LINES
SOUTHERN UTILITY SALES AGENCYPO BOX 816
PASS CHRISTIAN, MS 39571-0816(228) 452-6235
FAX (888) 492-9322www.susallc.com
MISSOURIALL PRODUCT LINES
POWER EQUIPMENT SALES1507 LAKE AVENUE
KANSAS CITY, KS 66103(913) 384-3848
FAX: (913) 384-5097www.powerequipsales.com
INDIANA - LESS NORTHERN CORNER
ALL PRODUCT LINESPOWERLINK ELECTRICAL SALES
30555 CLEMENS ROADWESTLAKE, OH 44145
(440) 899-0884FAX: (440) 899-1185
www.yourpowerlink.com
INDIANA - NORTHERN CORNERALL PRODUCT LINES
MIDWEST ELECT. RESOURCESN109 ERIN ROAD
OCONOMOWOC, WI 53066(920) 474-3500
FAX: (630) 778-9822www.mwelecres.com
IOWAALL PRODUCT LINES
THE MCCASKEY COMPANY5925 COUNCIL STREET, NE
SUITE 112CEDAR RAPIDS, IA 52402
(319) 743-3730FAX: (319) 743-3733
www.mccaskey-co.com
KANSAS ALL PRODUCT LINES
POWER EQUIPMENT SALES1507 LAKE AVENUE
KANSAS CITY, KS 66103(913) 384-3848
FAX: (913) 384-5097www.powerequipsales.com
KENTUCKYALL PRODUCT LINES
POWER SERVICE AGENCY2509 JOYA DRIVE
NASHVILLE, TN 37214(615) 885-6362
FAX: (615) 885-1261www.powerserviceagency.com
LOUISIANAALL PRODUCT LINES
SOUTHERN UTILITY SALES AGENCYPO BOX 816
PASS CHRISTIAN, MS 39571-0816(228) 452-6235
FAX (888) 492-9322www.susallc.com
MAINEALL PRODUCT LINES
LVA SALES56 HARVESTER AVENUE
BATAVIA, NY 14020(585) 201-7040
FAX: (585) 219-5859www.lvasales.com
UTILITY SOLUTIONS SALES REPRESENTATIVE DIRECTORYUNITED STATES
MONTANA -EAST ALL PRODUCT LINES
LEE NOONAN COMPANY 2230 COUNTRY ROAD H2 MOUNDS VIEW, MN 55112
(763) 560-1228 Fax: (763) 560-3282www.leenoonan.com
MONTANA - WESTALL PRODUCT LINESHEES ENTERPRISES
#1 12TH STREET, SUITE #15ASTORIA, OR 97103
(503) 325-8778FAX: (503) 325-2467
www.heesenterprises.com
NEBRASKAALL PRODUCT LINES
THE MCCASKEY COMPANY5925 COUNCIL STREET, NE
SUITE #112CEDAR RAPIDS, IA 52402
(319) 743-3730FAX: (319) 743-3733
www.mccaskey-co.com
NEVADA -NORTH ALL PRODUCT LINES
ISBERG-NOTT COMPANY4725 FIRST STREET #265PLEASANTON, CA 94566
(925) 426-4718FAX: (925) 426-0323www.isberg-nott.com
NEVADA -SOUTH ALL PRODUCT LINES
SOURCEWEST ELECTRICAL SALES,PO BOX 13080
CHANDLER, AZ 85248(480) 699-9013
Fax: (480) 699-9014www.sourcewestsales.com
NEW HAMPSHIRE ALL PRODUCT LINES
LVA SALES56 HARVESTER AVENUE
BATAVIA, NY 14020(585) 201-7040
FAX: (585) 219-5859www.lvasales.com
NEW JERSEYALL PRODUCTS LINES
G&M SALES, INC.1500 MCDANIEL DRIVE
WEST CHESTER, PA 19380(610) 738-1440
FAX: (610) 738-1441
NEW MEXICOALL PRODUCT LINES
VIKING UTILITY SALES, INC.894 N. CASTLEWOOD CANYON
ROADFRANKTOWN, CO 80116
(303) 660-6899FAX: (303) 663-7366www.viking-sales.com
NEW YORK – LESS NYCALL PRODUCT LINES
LVA SALES56 HARVESTER AVENUE
BATAVIA, NY 14020(585) 201-7040
FAX: (585) 219-5859www.lvasales.com
NEW YORK – NYC AREAALL PRODUCT LINES
G&M SALES, INC.1500 MCDANIEL DRIVE
WEST CHESTER, PA 19380(610) 738-1440
FAX: (610) 738-1441
NORTH CAROLINAALL PRODUCT LINES
POWERTECH, LLC9004 YELLOW PINE COURT
Waxhaw, NC 28173Phone (704) 843-7271FAX (704)843-7283
www.powertechllc.com
NORTH DAKOTAALL PRODUCT LINES
LEE NOONAN COMPANY 2230 COUNTRY ROAD H2 MOUNDS VIEW, MN 55112
(763) 560-1228 Fax: (763) 560-3282www.leenoonan.com
OHIOALL PRODUCT LINES
POWERLINK ELECTRICAL SALES30555 CLEMENS ROADWESTLAKE, OH 44145
(440) 899-0884FAX: (440) 899-1185
www.yourpowerlink.com
OKLAHOMAALL PRODUCT LINES
JONES POWER PRODUCTS3415 HUNTERS RIDGE
BLANCHARD, OK 73010(405) 485-2019
FAX: (405) 485-3484www.jonespowerproducts.com
OREGONALL PRODUCT LINESHEES ENTERPRISES
#1 12TH STREET, SUITE #15ASTORIA, OR 97103
(503) 325-8778FAX: (503) 325-2467
www.heesenterprises.com
PENNSYLVANIAALL PRODUCTS LINES
G&M SALES, INC.1500 MCDANIEL DRIVE
WEST CHESTER, PA 19380(610) 738-1440
FAX: (610) 738-1441
PUERTO RICOALL PRODUCT LINES
J.L. FLORES, INC.P.O. BOX 9719
CAGUAS, PR 00726(787) 747-5906
FAX: (787) 747-4663www.jlflorespr.com
RHODE ISLANDALL PRODUCT LINES
LVA SALES56 HARVESTER AVENUE
BATAVIA, NY 14020(585) 201-7040
FAX: (585) 219-5859www.lvasales.com
SOUTH CAROLINAALL PRODUCT LINES
POWERTECH, LLC9004 YELLOW PINE COURT
Waxhaw, NC 28173Phone (704) 843-7271FAX (704)843-7283
www.powertechllc.com
SOUTH DAKOTAALL PRODUCT LINES
LEE NOONAN COMPANY 2230 COUNTRY ROAD H2 MOUNDS VIEW, MN 55112
(763) 560-1228 Fax: (763) 560-3282www.leenoonan.com
TENNESSEE – EAST 2/3 ALL PRODUCT LINES
POWER SERVICE AGENCY2509 JOYA DRIVE
NASHVILLE, TN 37214(615) 885-6362
FAX: (615) 885-1261www.powerserviceagency.com
90 91
UTILITY SOLUTIONS SALES REPRESENTATIVE DIRECTORYUNITED STATES
TENNESSEE – WEST 1/3ALL PRODUCT LINES
SOUTHERN UTILITY SALES AGENCYPO BOX 816
PASS CHRISTIAN, MS 39571-0816(228) 452-6235
FAX (888) 492-9322
TEXASALL PRODUCT LINES
JONES POWER PRODUCTS4804 SNOWS HILL COURT
ARGYLE, TX 76226(405) 485-2019
FAX: (405) 485-3484www.jonespowerproducts.com
UTAH ALL PRODUCT LINES
CONELY ENGINEERING CO.2066 WEST 2300 SOUTH
SALT LAKE CITY, UT 84119(801) 972-5923
FAX: (801) 972-5952
VERMONTALL PRODUCT LINES
LVA SALES56 HARVESTER AVENUE
BATAVIA, NY 14020(585) 201-7040
FAX: (585) 219-5859www.lvasales.com
VIRGINIAALL PRODUCT LINESJ.B. SALES COMPANY
7957 INDUSTRIAL PARK ROADEASTON, MD 21601
(410) 822-9611FAX: (410) 822-8358
www.jbsales.com
WASHINGTONALL PRODUCT LINESHEES ENTERPRISES
#1 12TH STREET, SUITE #15ASTORIA, OR 97103
(503) 325-8778FAX: (503) 325-2467
www.heesenterprises.com
WEST VIRGINIAALL PRODUCT LINES
CALL FACTORY(828) 323-8914
WISCONSINALL PRODUCT LINES
MIDWEST ELECT. RESOURCESN109 ERIN ROAD
OCONOMOWOC, WI 53066(920) 474-3504
FAX: (630) 778-9822www.mwelecres.com
WYOMING – EASTALL PRODUCTS
THE MCCASKEY COMPANY5925 COUNCIL STREET, NE
SUITE 112CEDAR RAPIDS, IA 52402
(319) 743-3730FAX: (319) 743-3733
www.mccaskey-co.com
WYOMING -SOUTHALL PRODUCTS
VIKING UTILITY SALES, INC.894 N. CASTLEWOOD CANYON
ROADFRANKTOWN, CO 80116
(303) 660-6899FAX: (303) 663-7366www.viking-sales.com
Standard Terms and Conditions of Sale
Standard Terms and Conditions of SaleThese terms and conditions govern the sale of products (“Product or Products) and provisions of services (“Services”) by Utility Solutions Inc. (USI). These terms and conditions (“Agreement”) take precedence over Buyer’s supplemental or conflicting terms and conditions to which notice of objection is hereby given. Neither Seller’s commencement of performance or delivery shall be deemed or construed as acceptance of Buyer’s supplemental or conflicting terms and conditions. USI’s failure to object to conflicting or additional terms will not change or add to the terms of this agreement. Buyer’s acceptance of the Products and / or Services from Seller shall be deemed to constitute acceptance of the terms and conditions contained herein.
1. Orders: All orders placed by Buyer are subject to acceptance by Seller. Orders may not be cancelled or rescheduled without the Seller’s consent. All orders must identify the product, part number, quantity, unit price, freight forwarder, contact information, Bill and Ship To information as well as purchase order number, date and quotation reference if applicable. Seller may at its sole discretion allocate Product among its customers.
2. Prices: The prices of the Products are those specified through price list or quotation. Pricing is subject to change in the event of an increase in Seller’s cost, change in market conditions or any other causes beyond Seller’s control. Price quotations shall automatically expire in thirty (30) days from date of issue, or as otherwise stated in the quotation.
3. Taxes: Unless otherwise agreed to in writing by Seller, all prices quoted are exclusive of transportation and insurance costs, duties, and all taxes including federal, state and local sales, excise and value added, goods and services taxes, and any other taxes. Buyer agrees to indemnify and hold Seller harmless for any liability for tax in connection with the sale, as well as the collection or withholding thereof, including penalties and interest thereon.
4. Payment: Payment may be made by check, money order, credit card, or wire transfer (all fees are borne by the buyer). Where Seller has extended credit to the Buyer, terms of payment shall be net thirty (30) days from date of invoice. On any past due invoice, Seller may impose interest at the rate of 1.5% per month. If Buyer fails to make each payment when it is due, Seller reserves the right to change or withdraw credit and hereby suspend or cancel performance under any and all purchase order agreements in which Seller has extended credit to the Buyer. In the event of default by Buyer, Seller shall be entitled to costs, fees, and expenses, including but not limited to recover of attorney fees, court costs and fees, and collection costs.
5. Delivery and Title: All deliveries shall be made “EXWORKS” place of shipment, unless otherwise agreed upon. Title and risk of loss pass to the Buyer upon delivery of the Product to the carrier. Seller’s delivery dates are estimates only and Seller is not liable for delays in delivery or for failure to perform due to causes beyond the reasonable control of the Seller, nor shall carrier be deemed an agent of the Seller. A delayed delivery of any part of an order does not entitle Buyer to cancel other deliveries.
6. Acceptance / Returns: Shipments will be deemed to have been accepted by the Buyer upon delivery of the said shipments to the Buyer unless rejected upon receipt. Any discrepancy in shipment quantity must be reported within 7 days after delivery. Buyer may not return Products without a return for material authorization (RMA). RMA valid for 30 days from date issued. Any product returned by Buyer due to Buyer’s error may be subject to a restocking change equivalent to 100% of the value of such Product as specified in Sellers’s invoice to Buyer.
7. Limited Warranty: Seller warrants to Buyer that Products purchased hereunder will conform to the manufacture’s specifications for such products and is warranted from material defect for a period of one (1) year from the date of shipment. If Seller breaches this warranty, Buyer’s remedy is limited to (at Seller’s election) (1) refund of Buyer’s purchase price for such production (without interest), (2) repair of such Products, or (3) replacement of such Products; provided that such Products must be returned to Seller, along with acceptable evidence of purchase No warranty will apply if the Product as been subjected to misuse, neglect, accident or modification.
SAVE AS EXPRESSLY PROVIDED IN THESE TERMS AND CONDITIONS, ALL IMPLIED WARRANTIES, TERMS AND CONDITIONS (WHETHER STATUTORY OR OTHERWISE) ARE EXCLUDED TO THE FULLEST EXTENT PERMITTED BY LAW.
8. Limitation of Liabilities: BUYER SHALL NOT BE ENTITLED TO, AND SELLER SHALL NOT BE LIABLE FOR, LOSS OF PROFITS OR REVENUE, PROMOTIONAL OR MANUFACTURING EXPENSES, OVERHEADS, BUSINESS INTERUPPTION COSTS, INJURY TO REPUTATION OR LOSS OF BUYERS, PUNITIVE DAMAGES, LOSS OF CONTRACTS OR ORDERS OR ANY INDIRECT, SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE. BUYER’S RECOVERY FROM SELLER FOR ANY CLAIM SHALL NOT EXCEED THE PURCHASE PRICE PAID FOR THE AFFECTED PRODUCTS IRRESPECTIVE OF THE NATURE OF THE CLAIM WHETHER IN CONTRACT, TORT, WARRANTY OR OTHERWISE. BUYER WILL INDEMNIFY, DEFEND AND HOLD SELLER HARMLESS FROM ANY CLAIMS BASED ON (a) SELLERS COMPLIANCE WITH BUYER’S DESIGNS, SPECIFICATIONS, OR INSTRUCTIONS, (b) MODIFICATION OF ANYH PRODUCTS BY ANYONE OTHER THAN SELLER, OR (c) USE IN COMBINATION WITH OTHER PRODUCTS.
92 93
9. Export Control: Buyer certifies that it will be the recipient of the Products to be delivered by the Seller. Buyer acknowledges that the products are subject to the export/import control laws and regulations of various countries, including the Export Administration Laws of the United States. Products sold by the Seller cannot be transferred, sold or re- exported to any part on the Entity List or Restricted Persons List of the U.S. Department of Commerce Bureau of Industry and Security, any party designated by the U.S. Department of Treasury Department’s Office of Foreign Assets Control, and any party debarred or sanctioned for proliferation of terrorism reasons by the U.S. State Department.
10. Use of Products: Buyer agrees that Seller and manufacturer of the Products are not liable, in whole or in part, for any claim. Buyer agrees to indemnify, defend and hold seller and manufacturer of Products harmless from and against any and all claims, damages, losses, costs, expenses, and liabilities arising out of or in connection with use or sale.
11. Force Majeure: Seller is not liable for failure to fulfill its obligations for any accepted order or for delays in delivery due to causes beyond Seller’s reasonable control including, but not limited to, acts of God, natural or artificial disaster, riot, war, strike, delay by carrier, shortage of product, acts or omissions of other parties, acts or omissions of civil or military authority, Government priorities, changes in law, material shortages, fire, floods, epidemics, quarantine restrictions, acts of terrorism, delays is transportation or inability to obtain labor, materials or products through its regular sources, which shall be considered as an event of force majeure excusing Seller from performance and barring remedies for non- performance. In an event of force majeure condition, the Seller’s time for performance shall be extended for a period equal to the time lost as a consequence of the force majeure condition with subjecting Seller to any liability or penalty. Seller may, at its option, cancel the remaining performance, without liability or penalty, by giving notice of such cancellation to the Buyer.
12. Technical Assistance or Advice: Any technical assistance or advice offered to the Buyer is provided only as an accommodation to the Buyer. Seller shall not be held liable for the content or Buyer’s use of such technical assistance or advice nor shall any statement made by any of Seller’s representatives in connection with the Products or Services constitute a representation or warranty, express or implied.
13. General: (a) The laws of the state of North Carolina will exclusively govern any dispute between Seller and Buyer, (b) Buyer may not assign this Agreement without the prior written consent of the Seller. This agreement is binding on successor and assigns, (c) Products, including intellectual property, are subject to any applicable rights of third parties, such as patents, copyrights and/or user licenses.
T&C062413
Standard Terms and Conditions of Sale . . . continued
AAdapters 46Arc Shield 52Arm Guard Raptor Shield 21
BBags & Cases 45Bags for Fiberglass Sticks 45Blanket Buttons 63Blanket Clamp 63Blanket Holders 65Blanket Mate 65BLUE STRIPE® 34, 36, 38, 41, 42, 44
Boom Holster 43BREAK-SAFE® 8, 9, 10, 11Bucket Hook 68Bucket Mate 68Bucket Operable 35Bucket Stick Storage Case 45Bushing 57Bypass Tool 54
CCable Stripping 30Clamps 19, 63, 64Cleaning Brush 20Cleaning Supplies 48, 49Cloth 48Conductor Bar 12Conductor Cleaning 19, 20Conductor Cleaning Brush 20Conductor Cleaning Clamp 19Cutout 14, 15Cutout Bypass Tool 14Cutout Fuse Tube Remover 15
DDemonstration Trailers 59Disconnect Head 40, 42Double Prong Stick End 46Dual Conductor Bars 11Duckbill 9, 12
EElbow-Mule™ 28Elbows 28Electric Meter 52Electric Meter Jumper Leads 53, 54Expendable Fuse Tube Caps 26External Rod 36
FFemale Socket Adapter 37Ferrule End 53Fiberglass Hot Sticks 31, 36, 37, 38, 40, 42, 43, 44Fire Prevention 12Floating Head 9Foam Filled Extension 35
Foam Filled Straight Sticks 42Fuse-Safe™ 12Fuse Tube Caps 26Fuse Tubes 15, 26
GGeneral Purpose Cleaner 49GRAB-IT 15Grounding Assemblies 58Ground Operable 35Grounds Tester 58
HHoe Attachment 46Hot Stick Accessories 46Hot Stick Holder 43Hot Sticks 34Hot Stick Wax 49Hot Stick Wiping Cloth 48
IInsulated Rubber Blankets 62Internal Rod 36
JJack Jumper™ 14Jumper-Aid™ 17, 67Jumper Clamp 16, 66Jumper Hook 16, 66Jumper Leads 53, 54Jumper-T 18Jumper Wire 17, 67
KKlondike Clamp 64
LLoad Break Tools 5Load Pick-Up Tool 10LOAD-RANGER® 6, 7Load-Trainer™ 56, 57Low Voltage Bypass Tool 54
MMagnet 65Measuring Sticks 41Meter Grabber 52Metering Products 51Molded Bucket Hooks 68
NNEMA Switch-Head 38, 42
OOverhead Cutout 24, 25, 26Overhead Distribution 13Overhead Fuse Cutouts 23, 24
Index
94
PPad Gear 29Pad Mount 28, 29Pad Mount Multi-Tool 29Penta-Head Bolts 29Phase Rotation Meter 57Pick-Up Tool 8Plastisol Hanger & Clamp 46Polymeric Cutouts 24Polymeric Ice Removal Spline Attachment 46Polymeric Removal Hook Spline Attachment 46Porcelain Cutouts 24Portable Switch 10, 54
RRaptor Nesting Problems 21Raptor Shield 21Reach Technology 58Replacement Brush Set 19, 20Rescue Hook 44Rotary Blade Spline Attachment 46Rotary Prong Spline Attachment 46Rubber Blankets 62Rubber End Cap 46Rubber Goods 61
SSafety Gear 44Safety & Training 55Sales Representative Directory 87Sectional Disconnect Sticks 38Sectional Sticks 38, 39, 40Severe Weather Stick 44Shoestring Cutter 46Shotgun Sticks 36, 37Silicone Wipes 48Simulation 56Snap On Adapters 39, 40Socket 29Spline End 36, 40, 42Storage Bags 40Storm Stick 41, 44Straight Sticks 42Strip-N-Coil™ 30Substation Insulators And Bushings 22
TTele-Pole 34Telescopic Sticks 34, 35Tool Demonstration Trailers 59Torque Bar Spline Attachment 46Trailer 59Training 56Transformer 22
UUnderground Cables 30Underground Distribution 27Universal Hotstick Probe 46UniversalSpline 34, 36, 37, 38, 39, 40, 41, 42, 46URD Wrench 29USAG 21USBA 63USBC 43, 45USBM 65, 68USBS 8, 9, 10, 11USCC 19, 20USCO 24, 25, 26USCP 64USCS 30USDS 39, 40USEP 28USFS 12USGT 58USJH 16, 17, 66, 67USJJ 14USJL 53, 54USJT 18USLR 6, 7USMG 52USMT 29USRB 62USRH 44USSA 46USSB 45USSG 36, 37USSS 41, 42USTS 34, 35, 41USUW 29USVS 22
VVarmint Shield 22Visible Gap 18
WWax & Cleaner 49Wipes 48Wrench 29
XXFMR 56, 57XLT 6, 7