Field Mapping in Porphyry Copper...
14
Guidebook Field Mapping in Porphyry Copper Environments Cerro Colorado Mine, Chile August 11-14, 2002 Erich U. Petersen College of Mines & Earth Sciences University of Utah Salt Lake City, UT William X. Chávez, Jr. New Mexico School of Mines Socorro, NM
Transcript of Field Mapping in Porphyry Copper...
Guidebook
Field Mapping in Porphyry Copper Environments
Cerro Colorado Mine, Chile
August 11-14, 2002
Erich U. PetersenCollege of Mines & Earth Sciences
University of UtahSalt Lake City, UT
William X. Chávez, Jr.New Mexico School of Mines
Socorro, NM
Acknowledgements
We wish to acknowledge the many individuals and organizations that made thiscourse possible. We thank Compania Minera Cerro Colorado (BHP Billiton) for grantinggenerous access to the Cerro Colorado Mine . Ing. César Otarola and Ing. EduardoFernandez provided invaluable help in organizing the course. The cover photo was takenin 1997. The mapping course is sponsored by the Society of Economic Geologists.
Erich U. Petersen William X. Chávez, Jr.Department of Geology and Geophysics Minerals & Environmental EngineeringThe University of Utah Department135 S. 1460 E., RM 719 New Mexico School of MinesSalt Lake City, UT 84112-0111 Socorro, NM 87801801-581-7238 [email protected] [email protected]://www.mines.utah.edu/pyrite
Field Mapping in Porphyry Copper Environments
Participants
1. Carlos Caceres [email protected]
2. Cristian G. Calderon S.
3. Jose Cardenas P. [email protected]
4. Julio Cordova P. [email protected]
5. Eugene Cox [email protected]
6. Jean-Philippe Desrochers [email protected]
7. Amy Eichenlaub [email protected]
8. Ralph Gonzalez [email protected]
9. Takeshi Harada [email protected]
10. Ann Pattison [email protected]
11. Carmen Quispe [email protected]
12. Gustavo Rodriguez [email protected]
13. Samantha Roffey [email protected]
14. Fernando Rojas Angel [email protected]
15. Alejandro Sanhueza [email protected]
16. Carlos Urrutia [email protected]
17. Javier Urrutia [email protected]
18. Percy Zamora Diaz [email protected]
Itinerary
11 August, Sunday
11:00 AM Airport Pickup, Drive to Mamiña (Refugio del Salitre)1:00 PM Depart Holiday Inn Express for Mamiña (Refugio del Salitre)5:30 PM Organizational meeting
12 August, Monday
6:30 AM Breakfast7:00 AM Depart from Mamiña for Cerro Colorado7:30 AM Check in at Cerro Colorado, Mine Safety9:00 AM Mapping I1:30 PM Lunch1:30 PM Mapping II5:00 PM Depart Cerro Colorado for Refugio del Salitre
Evening Session
13 August, Tuesday
6:30 AM Breakfast7:00 AM Depart from Mamiña for Cerro Colorado7:30 AM Mapping III1:30 PM Lunch1:00 PM Mapping IV5:00 PM Depart Cerro Colorado for Refugio del Salitre
Evening Session
14 August, Wednesday
6:30 AM Breakfast7:00 AM Depart from Mamiña for Cerro Colorado7:30 AM Mapping V: Leached Capping / Core Review1:30 PM Lunch3:00 PM Depart for Airport
Useful References
Billings, M.P., 1972, Structural Geology, third edition, Prentice Hall, New York, 606 p.
Chávez. W.X., Jr., 2000, Supergene Oxidation of Copper Deposits: Zoning andDistribution of Copper Oxide Minerals. SEG Newsletter No. 41, April 2000.
Compton, R.R., 1985, Geology in the Field. John Wiley and Sons, New York, 398 p.
Davis, G.H., 1984, Structural Geology of Rocks and Regions. John Wiley and Sons,New York, 492 p.
Phelps Dodge, 2000, Geologia de los Porfidos de Cobre Cerro Verde Y Santa Rosa,Arequipa, Peru. Departamento de Geologia, 21 p.
Pierce, F.W and Bolm, J.G., Eds., 1995, Porphyry Copper Deposits of the AmericanCordillera. Arizona Geological Society Digest, 20, 656 p.
Titley, S.R., Ed., 1982, Advances in Geology of the Porphyry Copper Deposits,Southwestern North America. University of Arizona Press, Tucson, AZ, 560 p.
Titley, S.R. and Hicks, C.L., Eds., 1966, Geology of the Porphyry Copper Deposits,Southwestern North America, University of Arizona Press, Tucson, AZ, 287 p.
Some Common Mineral Formulas
Chlorite ..................................... (Mg,Fe)3(Al,Si)4O10(OH)2.(Mg,Fe)3(OH)6
Biotite........................................ KFe3AlSi3O10(OH)2
Muscovite.................................. KAl3Si3O10(OH)2
Kaolinite.................................... Al2Si2O5(OH)4
Alkali feldspar........................... (K,Na)AlSi3O8
Plagioclase ............................... CaAl2Si2O8
Dumortierite.............................. Al7O3(BO3)(SiO4)3
Tourmaline................................ (Na,Ca)(Li,Mg,Al)(Al,Fe,Mn)6(BO3)3
(Si6O18)(OH)4
Bornite ...................................... Cu5FeS4
Chalcopyrite.............................. CuFeS2
Chalcocite ................................. Cu2S
Covellite.................................... CuS
Cuprite ...................................... Cu2O
Tenorite..................................... CuO
Minerals Commonly Found in the Oxide Zone of CopperDeposits
Alunite ........................................................... KAl3(SO4)2(OH)6
Antlerite ......................................................... Cu3SO4(OH)4
Atacamite (paraatacamite, botallackite) ........ Cu2Cl(OH)3
Bonattite......................................................... CuSO4.3H2O
Brochanite...................................................... Cu4SO4(OH)6
Ceruleite......................................................... Cu2Al7(AsO4)4(OH)13.12H2O
Chalcanthite ................................................... CuSO4.5H2O
Chalcosiderite (compare to tourquoise)......... CuFe6(PO4)4(OH)8.4H2O
Chenevixite .................................................... Cu2Fe2(AsO4)2(OH4.H2O
Chrysocolla (mineraloid) ............................... Cu(Fe,Mn)Ox-SiO2-H2O, withcopper content varying from~20-40 wt % Cu
Copiapite........................................................Fe5(SO4)6(OH)2.20H2O
Coquimbite..................................................... Fe2(SO4)3.9H2O
Goethite.......................................................... a-FeOOH
Jarosite ........................................................... (K,Na)Al3(SO4)2(OH)6
Kröhnkite ...................................................... Na2Cu(SO4)2.2H2O
Levandulite .................................................... NaCaCu5(AsO4)4Cl.5H2O
Libethinite...................................................... Cu2PO4(OH)
Paramelanconite............................................. Cu4O3 (see tenorite (CuO) andcuprite (Cu2O)
Poitevinite ...................................................... (Cu,Fe,Zn)SO4.H2O
Posnjakite....................................................... Cu4SO4(OH)6.H2O
Pseudomalachite ............................................ Cu5(PO4)2(OH)4
Scorodite ........................................................ FeASO4.2H2O
Turquoise ....................................................... CuAl6(PO4)4(OH)8.4H2O
Voltaite........................................................... K2Fe8Al(SO4)12.18H2O
Wroewolfeite (Langite).................................. Cu4SO4(OH)6.2H2O
SEG Field Mapping Course-- Cerro Colorado Petersen & Chávez
Exercise:Collection and Interpretation of Structural Data using "Titley Squares"
Ejercicio:Recolección e interpretación de datos estructurales usando "Cuadros Titley"
This exercise asks one to collect standard fracture density information - but withthe caveat that we will quantify the structural data obtained using the methods describedby Heidrick and Titley (1982). The method is this: using squares having dimensions of50 cm by 50 cm, one collects the total length of fractures occurring in four orientations.These directions are up-down, left-right, and the two diagonal directions. One sums thetotal fracture lengths measured, and divides by the total area of the square, or 2500 cm2.This gives a quantitative value of fracture occurrence, as given in length/area, havingtherefore units of (length)-1. Note that one measures all fracture types, including veinletsof various types, as well as "clean" fractures.
This information is collected at various areas within the mine, and point values in(length)-1 are plotted and contoured (as at Sierrita, Arizona; Titley, 1999), showing thespatial changes in fracture density within an ore deposit, or within a specific intrusion orrock unit.
For this exercise, please measure - and compare your measurements - the fracturedensities for each of the "Titley Squares" we have prepared. Can you explain thevariation in fracture densities observed, even though we measured only a small area ofthe mine?
En este ejercicio, medimos, en una manera quatitative, la densidad de fracturas encuadros nombrados "Titley Squares" (véase Heindrick and Titley, 1982). La idea medirel largo de fracturas (fracturas abiertas, vetillas) dentro de un área cuadrada, en este caso50 cm por 50 cm, ó 2500 cm2. Calculamos entonces la razón: (largo total de fracturas)dividido por (área del cuadro), que nos da un número en (largo)-1.
Este número se pude plotear, como una inicación de la distribución de la densidadde fracturas según área en el yacimiento ó el prospecto, asi como hecho Titley en elyacimiento tipo pórfido de cobre Sierrita (1999).
Al plotear estos datos de la Mina, ?por qué hay una diferencia importante en ladensidad de fracturas que hemos medido, a pesar de que el área del yacimiento quehemos estudiado es realtivamente pequeño?
