2

FIBER OPTIC INTERCONNECTING COMPONENTS Cable assemblies

Fiber optic patchcords are made of highest quality SENKO and R&M components that conform to optical interface standards described in IEC/PN-EN 61754. Connector plugs are terminated on modern assembly line SENKO APC 8000 and verified by means of Data Pixel and EXFO measurement equipment: KONCENTRIK – measurement equipment for ferrule eccentricity verification as well as for eccentricity measurements and tuning of terminated connectors. DAISI / DASI MT – optical interferometer for 1,25 and 2,5 mm connectors and MT / MTRJ endface geometry measurements. IQS 12001 – optical connectors and passive devices insertion loss and return loss computer measurement test set; FOT150 – optical connectors insertion loss and return loss measurement test set kit. All offered connectors are compliant with the requirements for interfaces according to PN-EN 61754 and PN-EN61755. All cable assemblies are comliant with performance standards series PN-EN 50377 and internal standards ofPolish Telecom ZN-05/TPSA-044 for environment of U category according to PN-EN 61753-1 (uncontrolledenvironment, temperature range from –25 to +70°C, relative humidity 5%-95%). Customised products include connectors for use in environmental category E according to PN-EN 61753-1 (extremeenvironment, temperature range from –40 to +85°C, relative humidity 0%-98%, humidity condensation, industrialatmosphere). Plugs are offered for three attenuation grades: S-standard, P-premium, M-master. Standard – very high performance plugs providing very good random mate attenuation performance, compliant withIEC and PN-EN standards as well as corporate Polish Telecom standard. Performance of standard grade plugs fulfilsrequirements of most currently used fiber optic telecommunication systems (SDH, CWDM and CATV). Premium – plugs for most requiring customers, dedicated for use in high-end DWDM systems with high Power levelsand in case of tight optical line loss budget. Master – selectioned plugs, dedicated for test and measurement and for extremely high optical Power levels inoptical fibers (>30 dBm). Main geometrical parameters of SM PC and APC plugs

Parameter Standard Premium Master Radius of curvature PC 2,5/1,25 mm 10–25 mm/ 7–15mm

Radius of curvature APC 5 – 12mm Fiber potrusion/undercut

(spherical fit) PC and APC +50nm/ -50nm

Apex offset for PC and APC plugs < 50um (typical value) ≤ 50um ≤ 30um

APC 8° angle tolerance ± 0,3° ± 0,3° ± 0,2° PC 0° angle tolerance ± 0,2° ± 0,2° ± 0,1°

Key positioning tolerance for APC ± 0,5° ± 0,5° ± 0,3° Eccentricity of core of fiber and ferrule

Axis for PC and APC plugs ≤ 1,5um ≤ 1,0um ≤ 0,3um

Tuning PC and APC YES YES NO

3

Main optical parameters Connector type Random mating

Insertion loss (PN-EN 61300-3-34),

average, IL, dB

Insertion loss against reference plug

(PN-EN 61300-3-4), Maximum value,

IL, dB

Return loss of random mating

(PN-EN 61300-3-6), Minimum value,

ORL, dB SM-PC FC/PC

SC/PC E2000/PC

MU/PC ST/PC LC/PC

grade S ≤ 0,20 (99%≤ 0,5)

grade P ≤ 0,12 (97%≤ 0,25)

grade M ≤ 0,10 (97%≤ 0,15)

grade S - 0,4 grade P - 0,25 grade M - 0,15

grade S – 45 grade P - 45 grade M – 50

MTRJ < 0,30 (95%< 0,60) 0,75 35

SM-APC

FC/APC SC/APC

E2000/APC

grade S ≤ 0,20 (99%≤ 0,5)

grade P ≤ 0,12 (97%≤ 0,25)

grade M ≤ 0,10 (97%≤ 0,15)

grade S - 0,4 grade P - 0,25 grade M - 0,15

grade S – 60 grade P – 60 grade M - 65

SM MT ANGLE

MPO MTP

≤ 0,35 max 0,7

No reference plug specification 55

MM ST/PC FC/PC SC/PC LC/PC MU/PC

≤0,35

(95% ≤0,5) max 0,75

No reference plug specification 26

MTRJ

≤0,50 (95% ≤ 0,75)

No reference plug specification 26

MM MT FLAT

MPO MTP

≤ 0,50 max 1,0

No reference plug specification 26

Each plug is labelled with unique serial number together with manufacturing date (mm/yy) and has insertion loss and return loss test report (against REF reference plug). Each test report is unambiguously connected with a plug. Premium and Master grade plugs are accompanied by eccentricity test reports and endface geometry test reports.

0102030405060708090

100

Matingsnumber

IL, dB

Random mating SC/APC StandardPN- EN 61300-3-34

average: 0,159 dBstd. deviation: 0,046 dB

0102030405060708090

100

Matings number

IL, dB

Random mating SC/APC PremiumPN- EN 61300-3-34

average: 0,068 dBstd. deviation: 0,044 dB

4

Marking

Example of order J – SX – SMB2 – SCP - SCP - U – 24 – 100 Patchcord simplex terminated with plugs SM SC/PC Premium, fiber SM B2 according to PN-EN 60793-2-50, environment cat. U, reinforced cable of diam. 2,4 mm and of length 10 m. P – SX - SMF28 – E2AP –U - 09 – 20 Pigtail simplex terminated with plug SM E2000/APC Premium, fiber SMF28, environment cat. U, buffer fiber 0,9 mm of length 2 m.

5

FIBER OPTIC CONNECTORS AND ADAPTERS SPECIFICATION SC connectors - PN-EN 61754-4 • SC/PC SM plugs • SC/APC SM plugs • SC/PC MM plugs • SC/PC duplex SM and MM plugs • SC/APC adapters • SC simplex SM and MM adapters • SC „small flange” adapters • SC duplex SM and MM adapters • Plugs terminated on reinforced cables 3/2,4/2 mm

and buffer fibres 0,9 mm

E2000 connectors – PN-EN 61754-15

• E2000/PC SM plugs • E2000/APC SM plugs • E2000/PC SM adapters • E2000/APC SM adapters • E-2000 „small flange” adapters • Plugs terminated on 3/2,4/2 mm cables and buffer fiber 0,9

mm FC connectors - PN-EN 61754-13 • FC/PC SM plugs • FC/APC SM plugs • FC/PC MM plugs • FC DHM adapters • FC/APC tight key adapters • Plugs terminated on reinforced cables 3/2,4/2 mm and

buffer fiber 0,9 mm ST connectors - PN-EN 61754-3 • ST/PC SM plugs • ST/PC MM plugs • ST SM i MM adapters • Plugs terminated on cables 3/2,4 mm and buffer fiber 0,9

mm

LC connec

• LC• LC• LC• LC• Pl

bu MU conne

• M• M• M• Pl

bu MTRJ con

• M• M• M• M• M• Pl

MPO/MTP

• M• M• M• Pl• In

Hybrid ada

• FC• FC• FC• SC• SC• SC• SC• SC• FD• ES

ctors - PN-EN

C/PC SM plugC/PC MM plugC/PC duplex SC duplex SM ilugs terminateuffer fiber 0,9

ctors - PN-E

U/PC SM plugU/PC SM DupU duplex SM lugs terminateuffer fiber 0,9

nectors – PN

TRJ SM “maTRJ SM „femTRJ MM “maTRJ MM „femTRJ adapterslugs terminate

connectors

TP and MPO TP and MPO TP/MPO adaplugs terminatestallation of fa

apters

C/PC – SC/PCC/PC – ST/PCC/PC – E2000C/PC – ST/PCC/PC – E2000C/APC – FC/AC/APC – E200C/PC – ST/PCDDI – ST/PC SCON – ST/P

N 61754-20

gs gs SM i MM plugs MM adaptersed on cablesmm

EN 61754-6

gs plexks plugs adapters ed on cablesmm

N-EN 61754-1

le” plugs male” plugs ale” plugs male” plugs s, mounting hoed on duplex c

– PN-EN 617

12 fibers SM 12 fibers MMpters ed on reinforcean-out 12 fibre

C C 0/PC C 0/PC APC 00/APC C Duplex Duplex

PC Duplex

s s 3,0/2,4/2,0/1

3,0/2,4/2,0/1

8

ole SC cables 1,6mm

754-7

(angle) plugs (flat) plugs

ed ribbon cables SM and MM

,6 mm and

,6 mm and

les M

6

7

FIBER OPTIC ATTENUATORS ATC Fix attenuators made of doped fiber, optimized for 1310, 1550, 1310/1550 nm and optical bands C and L.

• Attenuation range: 1 - 10 dB every 1 dB, 12, 15, 20, 25dB;

• Tolerance: 1...5 dB ± 0,5dB, 6...25dB ± 10%; • Operating wavelength 1310 and 1550nm: ±10nm; • ORL: PC >50dB, APC>65dB; • Max optical power >30dBm (1W); • all connector types; • operating temperature range: -40...+75°C •

ATS

Fused attenuators on reinforced cables.

• Attenuation range: 3...20dB; • Tolerance: 3...5dB± 0,5dB, 6...20 dB ± 10%; • Operating wavelength: 1310/1550±20nm; • all connector styles; • any length; • operating temperature range: -25...+70°C

TRM terminators Plug terminators for back-reflection suppression.

• ORL: PC >50dB, APC>65dB; • Max. optical power >30dBm (1W); • all main connector styles; • operating temperature range: -40...+75°C

Example of order ATS-10-SM-SCAP-E2AP-U-24- 5 Fused attenuator 10dB, SM, terminated with SM SC/APC and E2000/APC Premium plugs, environment cat. U, made on reinforced simplex cable of diam. 2,4 mm and length 5 m.

8

PRE-TERMINATED CABLES AND FIBRES MPO/MTP indoor cables

Indoor cables with MPO and MTP connectors • patchcords SM, female, angle - 12 ribbon fibers; • hybrid patchcordsy „fan out” SM , male, angle –

SC/E2A/LC/ST, 12 fibers; • patchcords MM , female, flat - 12 ribbon fibers; • hybrid patchcords „fan out” MM , male, flat – SC/ST/LC,

12 fibers; • MPO adapters; • fan-outs optimal installation in adapted patch panels

and distribution boxes; • environment cat. C according to PN-EN 61753-1

(controlled environment) Indoor cables (multi-cables) Pre-terminated indoor cables.

• cables of 2-12 buffer fibres 0,9mm SM and MM; • pigtails 0,9mm or in 2mm jacket with simplex

connectors; • environment cat. C according to PN-EN 61753-1

(controlled environment) Outdoor cables – tactical Pre-terminated outoor cables.

• cables with poliuretan coating (PUR) reinforced by aramid, diam. 6 mm;

• 2-4 fibers SM i MM, buffer 0,9mm; • pigtaile in 2mm jacket with simplex connectors; • SM and MM LC duplex cables; • environment cat. E according to PN-EN 61753-1

(extreme environment) Outdoor trumpet cables, gelled Pre-terminated outdoor cables

• cables of 2-12 fibres SM and MM, coating 0,25mm • terminated with threaded head for CATV equipment

(5/8”thread); • pigtails buffer 0,9mm or reinforced cable of 2mm; • environment cat. U according to PN-EN 61753-1

(uncontrolled environment)

9

SWR – box optical network simulators

F

Boxes with optical fiber for measurement with OTDR reflectometer (dead-zone suppression), dedicated to laboaratory tests B&R and education.

• SM and MM optical fibers; • Total fibers length up to 4 km; • pigtaile of length up to 5m; • terminated with any connectors; • durable and aesthetic housing made of polycarbonate

Optical network simulators

• OPD/6U – patch panel up to 40km of fiber • OPD/3U – patch panel up to 10 km of fiber • reels with z optical fiber SMF28e of length up to 20km,

terminated with pigtails with any connectors.

Example of order J-12-SM–MPOAF-MPOAF-C-RC-50 Indoor reinforced ribbon cable of 12 fibers SM with connectors MPO angle, female, environment cat. C according to PN-EN 61753-1, length 5,0m. F-12-SM-MPOAM-SCP-C-09-20 Fan-out, 12 fibers SM, with connectors MPO angle, male and connecotrs SC/PC grade premium, pigtails on buffer fiber 0,9mm of length 2 m, environment cat. C according to PN-EN 61753-1 SWR - SMF28e - 1000- FC – SCA - C - 20 - 50 Box with fiber SMF28e of length 1000m, environment cat. C according to PN-EN 61753-1, pigtailes FC/PC and SC/APC, cable 2mm of length 5m