FERRI offset inline verge mowers ZME
2
GROUP A Working positions (m) 6-rows spiral rotor Floating frame to follow the ground contours Rotation joint on self lubricating bushing Rotor internal sealed bearings OFFSET/IN-LINE VERGE MOWERS SPECIFICALLY DESIGNED FOR COMPACT TRACTORS Pto with overrun clutch Mechanical breakaway Rear adjustable roller Rotation joint and arms on self lubricating bushing Rotor with internal bearings Inner lining HP Tractor 18 25 30 40 Min. tractor weight Kg Min. tractor width m ZME125 700 1,10 ZME155 900 1,20 +90° -50° ZME 125 ZME 155 A B B 1,74 A ZME 125 ZME 155 2,04 1,54 1,54 m m C D E D C 0,70 0,70 E 1,25 m ZME 125 ZME 155 1,55 m 1,30 m 1,30
description
Side mowers working behind and on the side of the tractor on flat or sloping surfaces (max. cutting width: Ø 1,5 cm).
Transcript of FERRI offset inline verge mowers ZME
GROUP A
Working positions (m)
6-rows spiral rotor
Floating frame to followthe ground contours
Rotation joint on selflubricating bushing
Rotor internal sealedbearings
OFFSET/IN-LINE VERGE MOWERSSPECIFICALLY DESIGNEDFOR COMPACT TRACTORS
Pto with overrun clutch
Mechanical breakawayRear adjustable roller
Rotation joint andarms on self lubricating bushing
Rotor withinternal bearings
Inner lining
HP Tractor 18 25 30 40 Min. tractor weightKg
Min. tractor widthm
ZME125 700 1,10ZME155 900 1,20
+90°
-50°
ZME 125 ZME 155
A
B
B1,74A
ZME 125 ZME 1552,04
1,54 1,54
CD
E
DC
0,70 0,70E
1,25mZME 125 ZME 155
1,55m
1,30m 1,30
mm
+90°
-50°
ZME 125 ZME 155
A
B
B1,74A
ZME 125 ZME 1552,04
1,54 1,54
CD
E
DC
0,70 0,70E
1,25mZME 125 ZME 155
1,55m
1,30m 1,30
mm
+90°
-50°
ZME 125 ZME 155
AB
B1,74A
ZME 125 ZME 1552,04
1,54 1,54
CD
E
DC
0,70 0,70E
1,25mZME 125 ZME 155
1,55m
1,30m 1,30
mm
Equipped with:
IT IS RECOMMENDED that the connection between tractor and shredder and its setting up should be made with the Dealer according the instructionsand warnings listed on our Use and Maintenance Manual. For further information please contact our after sales service.
FERRI srl - Via Govoni, 30 - 44034 Tamara (FE) Italy - Tel. +39 0532 866866 - Fax +39 0532 866851 - [email protected] - www.ferrisrl.itSpare parts: Tel: +39 0532 866993 - Fax: +39 0532 867061 - e-mail: [email protected] sales service: Tel: +39 0532 866991 - Fax: +39 0532 866851 - e-mail: [email protected]
Technical dataModel Cutting
widthMaxsidesliding*
Flail head angle Weight Pto Belts Blade tipspeed
m m degrees Kg Rpm n° m/sec
ZME125 1,25 1,74 50° 90° 263 540 3 45ZME155 1,55 2,04 50° 90° 285 540 3 45
* Reach measured from tractor centre line to head edge
Suitable for tractors equipped with 1 distributor provided with 2 double acting sections, one of which with floating. In case the tractor has only one acting, it will be necessary to fit the kit distributor with floating (see option.)
Warning
�Mechanical breakaway
� Hydraulic sideshift cylinder
� Hydraulic cylinder for head positioning
� Rotation joint and arms on self lubricating bushing
� Rotor with internal bearings
� Rear adjustable roller Ø 100 cm – 3 positions
�Main housing with inner lining
� Front and rear protection of flail head
� Pto with overrun clutch
� Packing
Flails Articulated “Y” flailsfor grass and bushesØ max 1,5 cm
Cod. 0901133
MachinesModel
ZME125 56 Articulated “Y” blades
ZME155 72 Articulated “Y” blades
Accessories
Kit distributor with floating - in case the tractor is not equipped with double acting valves(cod. ZME12501)
