FERRI hydraulic reach mowers TPE (left hand)
2
GROUP A “Overlap” spiral rotor with two spiral rows Drop forged brackets for arms and flail head rotation Top mounted flail head with 190° angle Rear mounted flail head with 235° angle Frame “DELTA BOX” (forces shared and balanced Gear High Performace hydraulic system Replaceable skids HYDRAULIC REACH MOWERS (GEAR HYDRAULIC SYSTEM “HP”) Cable controls Electric Proportional Controls with rotor start and stop by electric switch HP Tractor 60 70 80 90 Min. tractor weight Kg Min. tractor width m TPE600 Evo 3200 2,20 Working positions (m) TPE600 Evo A m 5,96 B m 6,18 C m 3,31 D m 4,36 E m 5,54 I m 2,16 L m 1,14 M m 2,55 N m 2,42 O m 2,95 P m 1,42 new HP 42 available to the rotor HP 50 max to hydraulic motor A P N O M I L B C E D Drop forged parts used in the arms Protected pipes Pressurized oil tank Rotation block for transport Central pivot Junction pipes Stiff pipes on rotor feed Drop forged parts Reversible rotor by cable Floating Replaceable skids Adjustable rear roller Power slew 115°
description
Hydraulic reach mowers with gear hydraulic system “HP”. For grass, shrubs, bushes, sticks, wood (max. cutting width: Ø 4 cm).
Transcript of FERRI hydraulic reach mowers TPE (left hand)
GROUP A
“Overlap” spiral rotor withtwo spiral rows
Drop forged brackets for arms and flail head rotation
Top mounted flail head with 190°
angle
Rear mounted flail
head with 235° angle
Frame “DELTA BOX” (forcesshared and balanced
Gear High Performacehydraulic system
Replaceable skids
HYDRAULIC REACH MOWERS(GEAR HYDRAULIC SYSTEM “HP”)
Cable controlsElectric Proportional Controls with rotor startand stop by electric switch
HP Tractor 60 70 80 90 Min. tractor weightKg
Min. tractor widthm
TPE600 Evo 3200 2,20
Working positions (m)TPE600
EvoA m 5,96
B m 6,18
C m 3,31
D m 4,36
E m 5,54
I m 2,16
L m 1,14
M m 2,55
N m 2,42
O m 2,95
P m 1,42
new
HP 42 available to the rotorHP 50 max to hydraulic motor
A
PN
OM
IL
B
CE
D
Drop forged parts used in the arms
Protected pipes
Pressurizedoil tank
Rotation block for transport
Central pivot
Junction pipes
Stiff pipes on rotor feed
Drop forged parts
Reversible rotorby cable
Floating
Replaceable skids
Adjustable rear roller
Power slew 115°
FERRI srl - Via Govoni, 30 - 44034 Tamara (FE) Italy - Tel. +39 0532 866866 - Fax +39 0532 866851 - [email protected] - www.ferrisrl.itSpare parts: Tel: +39 0532 866993 - Fax: +39 0532 867061 - e-mail: [email protected] Sales Service: Tel: +39 0532 866991 - Fax: +39 0532 866851 - e-mail: [email protected]
Equipped with:
IT IS RECOMMENDED that the connection between tractor and shredder and its setting up should be made with the Dealer according the instructionsand warnings listed on our Use and Maintenance Manual. For further information please contact our after sales service.
Warning
(*) Reach measured from tractor centre line to head edge. (•) The weight includes flail head, oil, and oil cooler
Technical dataModel Max
horizontalreach*
Flail head forward
Weight (•)
Oil Rotor Pto Flail headangle
m m Kg l Rpm MAX RpmTPE600 Evo 5,96 - 1.050 137 3.100 540 235°
Machines with cable controls “Classic”Code Model PI60LHFDY13ZA TPE600 Evo with flail head TJ125 m 1,25
Machines with electro-hydraulic proportional control “EP-Tronic”Code Model PI60LHADY13ZA TPE600 Evo EP-Tronic with flail head TJ125 m 1,25
Completing equipment to the base machineCode Length cm TGA5020 (640-890) 1 set of standard stabilizers to the tractor. Compulsory option TSN5033 (470-720) 1 set of bent stabilizers recommended with “Delta yoke” OPT001121000 - “Delta yoke” for stabilizers ATT/4 - Fixed linkage. Stabilizers TGA5020 needed. TGA5018 (340-460) Top Link short
TGA5019 (485-720) Top Link long
OptionCode - ** Price reduction for Top Mounted TJ head - Price reduction for NO OIL COOLER (only CLASSIC) TSP5026 Lift float (LFA mechanic) TPE52002 Lift float (LFA electric) only for Comfort Plus TSP5022SX/02 Light kit TSP5024/02 Electric roll-over protection system (SAB) only for Comfort Plus
Flails TJ125Interchangeable on the same rotor Interchangeable on the same rotor
Multi-use blades for:grass, shrubs, bushes, sticks, woodØ max 3 cm
Spoon blade for: grass, shrubs, bushes, sticks, woodØ max 2 cm
“T” Hammer for woods
Ø max 4 cm
Articulated “Y” flails for: grass and bushes
Ø max 2 cm
Bootie blades for:grass, hedges, bushes
Ø max 2 cm
Hedge trimmingblades for: grass, hedgesØ max 1 cm
Cod. 0901146 Cod. 0901164 Cod. 0901147 Cod. 0901049 Cod. 0901138 Cod. 0901135n° 52 n° 26 n° 26 n° 60 n° 30 n° 30
� Flail Head
� Cast iron gear pump motor
� Oil cooler in Alluminum with thermostat
� Power slew 115°
� Hydraulic break-back on the rotation with max pressure valves and soft stop.
� Mechanic roll-over protection system (SAB)
� Rear roller Ø 133 mm
� “Overlap” spiral rotor with two spiral rows.
� Rotor balancing on side flanges.
� Reversible rotor cable (DSR)
� Front and rear abrasion resistant guard for flail head
� Replaceable skids
� Oil and Pto shaft
Flail head TJ125
Width (m) 1,25Rotor speed (rpm) 3100Blade tip speed (m/sec) 64Flail head angle 190°/235°Weight (Kg) 240
TJ 125Direct drive
new
