Fendt 900 Vario - Chandlers · The new Fendt 900. The executive. The Fendt 900 Vario is the...
19
Fendt 900 Vario
Transcript of Fendt 900 Vario - Chandlers · The new Fendt 900. The executive. The Fendt 900 Vario is the...
Fendt 900 Vario
The new Fendt 900.The executive.The Fendt 900 Vario is the “top-level executive” on the tractor market. With 390 hp maximum output, it delivers enormous traction and power, and intelligently converts it into pure efficiency. With powerful leading qualities, the new 900 Vario is the top contender for an executive position in your farming business.
Fendt 924 Vario 240 hp 176 kWFendt 927 Vario 270 hp 199 kWFendt 930 Vario 300 hp 221 kWFendt 933 Vario 330 hp 243 kWFendt 936 Vario 360 hp 265 kWFendt 939 Vario 390 hp 287 kW Maximum output to ECE R24
The new Fendt 900 Vario. The top-level executive talent.2 3
Vario
More for the environment:
x
2
More profitability:
*In-house comparison Fendt Vario stage 3 and 3b
More performance:
More comfort: 3
More versatility:
More safety:
The Philosophy: MORE from LESS
More information: www.fendt.com/efficient-technology
g/kWh, DLG PowerMix* plus AdBlue consumption amounting to 8.6 % of the diesel consumption
IN CLASS
4
The executive corner o!ce with lots of spaceThe 900 Vario offers you a workplace that gives you plenty of free space. From the driver seat, you!can control all working procedures with the new Variotronic and always have everything in view. Automated functions, automatic air-conditioning and much more keep your performance and concentration at a high level over the entire work day.
The driver station in the 900 Vario
console on the right armrest
is standard
suspension with integral level control
concept: cab suspension plus a driver seat with active suspension combined with front axle suspension
The x5 cab tested in profi 12/2009: “Of all the standard tractors, the Fendt performed the best. The system with the independent wheel suspen-sion on the front axle and three-point cab suspension is very well balanced. There is hardly any lateral roll and you feel safe when driving.”
More information: www.fendt.com/900/details
The driver station in the 900 Vario
1,920 hand movements less per day3.5 m3 driver paradise with panorama view More than ordinary suspension
A workplace for high performance
Multi-function joystick with activating buttons for automated functions and operating buttons
10.4” Varioterminal
Multi-function armrest
Height and tilt-adjustable steering column
Instrument cluster with rpm, speed and multiple display
Control panels for lighting and rear win-dow heater / wiper
Reverser lever
Pedal range
Power lift operating module for rear lift with quick lift switch, depth control and PTO actuation (optional for front lift)
7” Varioterminal
Operating buttons for auxiliary hydraulic con-trol units 3 and 4 and VariotronicTI automatic functionTI
Crossgate lever for 1st and 2nd auxiliary hydraulic control units
Hand throttle
Cruise control buttons
Control elements for auxiliary hydraulic control units 5 - 8
Engine speed memory keys
Membrane keypad for activating TMS, VariotronicTI, speed range selection, 4WD and di! erential lock engagement, front axle sus-pension and PTO speed selection.
Air spring elements with integ-ral, automatic level control
No vibrations, no bounceThe three-point suspension with air spring elements enab-les a fully vibration-minimised cab. The great di! erence in height and the long distance between the spring elements of the x5 cab also prevent bouncing and ensure maximum ride comfort.
8
Info +Info + Info +Info +
Info +
Info +Info + Info +Info +
Info +
Info +Info + Info +Info +
Info +
1
17m
01
RECORD
EDIT o!ine
PLAY
RECORD
5,0
5,04
403
402
1
WertFunktion Auslöser
%
%
m
Go 1
START
Variotronic TI
P!ug
12
1/2
Wetter:leicht windig
Herbizid:Atlantis
Herbizid:U 46 D-Fluid
HeislawastlBad Kohlgrub
Betrieb Müller
Winterweizen:Dekan
Oberer Acker am:See
Hr. Fleißig: Spritzen 1.04
1,750
10,0005
1,500
30,00
ha
l/ha
l/ha
ha
Vario-Doc Pro Hauptseite
1
17m
01
between touchscreen and key control
in just one terminal for the first time
VariotronicTI with optimum setting options
VarioGuide automatic steering
data transfer with VarioDoc
More information: www.fendt.com/900/details
Variotronic tested in the 828 Vario: best in test in the topagrar “Operating Concepts” test 01/2011:
“Fendt has succeeded in clearly arranging a large num-ber of functions on the armrest. The monitor sets new standards with its menu navigation.”
The Fendt Variotronic
Das „4-in-1-Varioterminal“
Help ESC key
Rotary control
Navigation
Screen layout
Main menu
The new Variotronic TI headland management allows operators to create turning manoeuvres very easily, while the tractor is standing or driving, and then saves them for the speci"c implement. The entire operating sequence is shown along with the corres-ponding triggers and values, such as the seconds or the distance to the next step, which makes it easy for operators to understand the procedure. Individual steps in the operating sequence can be edited at a later time.
The terminal can be operated per touch screen or using the control elements on the right side of the terminal.
Camera image Variotronic TI page
Map view
Data exchange via ISOXMLWhen it comes to data exchange, Fendt puts its cards on full compatibility. The ISOXML standard allows seamless data exchange with any compatible field record. The list of compatible software is constantly growing.
Documentation with VarioDoc – wireless data transfer from the tractor directly to the officeAll data are transferred wirelessly from the Varioterminal to the office PC and automatically saved. Bothersome exporting of data with a memory card is a thing of the past.
The last turning manoeuvre is as precise as the first Finally, all functions in one terminal Work up to 1,250 hectares more with VarioGuide VarioDoc is available in two versions
Screen layoutThe 10.4” Varioterminal can display up to four applications simultaneously. You can easily choose and change the arrangement of the applications on the screen as you wish.
The new VarioterminalThe 7” Varioterminal permits easy tractor and implement control as well as operation of the VariotronicTI headland management. The Varioterminal 10.4”, which is twice as big, also offers camera functions as well as VarioGuide and VarioDoc. .
Variotronic Implement Control Any ISO 11783 compliant implement can be operated with the Fendt Vario-terminal. Up#to 12 operating functions can be displayed in the clearly laid out full page#view.
Camera functionsThe Varioterminal has two camera inputs. They can be viewed in quarter, half or full screen view. Operators do not need to cons-tantly turn around, for example, to monitor the rear implement.
Varioterminal 7“ 10.4“Tractor controls Implement controls Variotronic TI VarioGuide - VarioDoc - 2 camera images - Map view -
?
Info +Info + Info +Info +
Info +VarioGuide automatic steering
coverage through six percent less overlapping
visibility conditions
through the use of GPS and GLONASS
More information at:www.fendt.com/900/details
VarioGuide received the overall rating 1,55 in the top agrar tractor test “GPS steering” 03/2011:
“The system is straightforward, fully integrated and works well”
Fendt VarioGuide automatic steering
Work up to 1,250 hectares more with VarioGuide Always connected
Right on track
Easy to transfer and well protectedThe antenna unit can be easily transferred between pre-equipped machines in a matter of minutes. The individual components, such as the antenna, receiver and roll bias compensation unit are accommodated in a compact hou-sing unit and fully integrated in the roof. The antenna is therefore optimally protected against external influences such as blows from branches..
Fendt VarioGuide fits your individual requirements and can deal with almost any shape of field:
VarioGuide Standard
compost spreading, rolling, mowing or applying slurry
VBS (subscription required)
VarioGuide Standard allows you to choose between the free EGNOS correction signal and the fee-based OmniSTAR VBS subscription service, which provides outstanding reliability. Satellite-supported operation allows you to profit from both correction signals with full flexibility – no#matter where you are working.
VarioGuide Precision
as cereal sowing (except for row crops)
A key advantage of VarioGuide Precision is that it expands the application range to include operations with cereal seeds. Just like VarioGuide Standard, the signal offers full flexibility for operations in changing work locations.
VarioGuide RTK*
to 30 km
racy and constant precision all day and night. The mobile
a subscription and covers a range of up to five kilometres.
station.With Ntrip, signals are transmitted reliably over the mobile network, which guarantees high availability at all times. That gives you maximum accuracy and high $ exibility for interregional operations.*depends on country
Better quality of work with VarioGuide automatic steeringWith VarioGuide, operators can concentrate fully on the implement. That increases performance and has a positive impact on the overall quality of work, even in poor visibility conditions. VarioGuide guarantees maximum reliability thanks to new satellite technology.
Intuitive operation via the VarioterminalIn the Varioterminal, operators have an over-view of all the important settings for VarioGuide on one page. The straightforward display makes it very easy to operate and menu navigation is intuitive.
A team the way it should be –powerful and highly e!cientA dream team is at work in the 900 Vario. An engine with up to 390 hp is the strong and powerful part of the team. The Vario transmission converts this massive power into the highest possible efficiency. Together the engine and transmission deliver the best results.
Cutting-edge engine and transmission technology
Nm155015001450140013501300125012001150110010501000
950 kW290280270260250240230220210200190180170160150140130
1000 1200 1400 1600 1800 2000 2200
g/kWh220210200
936
936
1000750!= 45°
!= 45°
"= 45°
"= 30°
I II
1 2
6
8
77
345
cubic capacity: 390 hp maximum output at 1,850 rpm
with emissions standard Stage 3b/Tier IV interim and excellent fuel efficiency
injection system with injection pressure up to 2,000 bar
ML260
TMS and automatic max output control are standard
Operation Time Consumption
Mowing -10 % -10 %Chopping silage maize -10 % -10 %Harvesting potatoes -5 % -10 %Harrowing/drilling -5 % -10 %Weeding -5 % -10 %Ripping -3 % -3 %Ploughing -3 % -3 %
The savings potential for various working procedures is clearly evident. You save valuable working time through higher area coverage and also profit from low fuel consumption.
Cutting-edge engine and transmission technology
*In-house comparison Fendt
Automatically drive at the limit Fendt automated efficiency functions make saving easy
The engine and transmission work together perfectly
750 1000
12
6 543
8
77
9
%=30°
%=45°
&=45°
&=45°
1
6
7
78
9
2
10
10
SCR (Selective Catalytic Reduction) for exhaust gas after-treatmentWith SCR technology, exhaust is after-treated with Adblue®, a 32.5 percent solution of urea, which converts nitrous oxides NOx into non-toxic nitrogen and water. The consumption of AdBlue, the standard urea-water solu-tion used by commercial vehicles, lies at an average of seven percent of the diesel consumption. This can vary depending on the operation. AdBlue® is available at filling stations all over the world or through AGCO Parts.
Reaction ofNH3 x –> H2 2
AdBlue® injection
delivery module with " lter
AdBlue® tank
AdBlue® " ller neck
AdBlue® extraction and heating
cooled metering module
SCR catalytic converter
Fuel consumption
Power
Torque
The ingenious Fendt Vario transmissionThe Fendt Vario transmission is a hydrostatic-mechanical power split drive. With increasing speed, the share of the mechanical power transmitted through the planetary set increases. The hydrostats, which can be swung 45 degrees, and a high operating pressure of max. 550 bar ensure exceptional efficiency.
engine torquehydraulic power transfermechanical power transferPTO drive4WD
1. Torsional vibration damper
2. Planetary gear set 3. Ring gear 4. Sun wheel 5. Planet carrier 6. Hydraulic pump 7. Hydro motor 8. Collecting shaft 9. Cruising range selection10. PTO transmission
1,547 Nm torque, max. 390 hp at 1,450 rpm and a specific fuel consumption of 194 g/kW for the 939 Vario, thanks to implementation of the latest technology.
The high performer with up to 20 percent more gripThe 900 Vario also plays a leading role in the field. Full pulling power and versatility for mounted implements give you the high flexibility you need for all operations. Thanks to a 2.15-meter maximum tyre diameter
transfers power effectively to the ground. In terms of soil protection and traction, the high performer provides up to 20 percent better results than with the next smaller tyres.*
* Comparison “Test Tyres for the 300-hp Class”, Agrartechnik 10/2010 / DLZ Traktorenheft 2011
The Fendt 900 Vario in the field
EXT
10s30l30l
10s30l30l
10s30l30l
10s30l30l
10s30l30l
30l30l
PflugHydraulikventile Heck
6,815,034,827,5
Pflug
Schlepper Hauptseite
double-acting valves
Front: 5,550 daN
shock load stabilising and da function
valves and rear PTO
More information: www.fendt.com/900/details
* Comparison Test “Tyres for the 300-hp Class”, Agrartechnik 10/2010 / DLZ Traktorenheft 2011:
tested tyres included the Michelin 710/75#R42 AxioBib IF with a 2.15-m diameter, which is approved by Fendt for standard tyres. Traction measurement with five percent slip revealed that the IF 710/75 R42 has a 20-percent higher traction value than the IF 710/70 R42 (2.05 m tyre diameter). A clear result. Fendt offers the 710/75 R42 tyres as standard for the 936 and 939 Vario
The Fendt 900 Vario in the field
Powerful lift capacityMore than 22 connections at the front and rear Powerful hydraulic system
PTOs with economy function
A push of a button for best quality of work
E" ective cooperation with di" erent partners
Axial piston hydraulic pump in intermediate
Heat exchanger for hydraulic oil cooling.
Front hydraulic connections (max. 2)
Front axle suspension
Drehadapter
(optional)
Steering servo
- Auxiliary control units
- Rear power lift
Multi-function joystickControls Valve 3 and 4, power lift automatic mode
Crossgate leverControls Valve 1 and 2
Power lift moduleControls rear linkage, comfort front linkage
Easy operation in VarioterminalThe hydraulics can be operated easily and intuitively in the Varioterminal. The submenu for the hydraulic valves can be accessed by touching the icon or using the button. Alternatively, the hydraulics can be operated with the navigation keys.
A number of connections are available at the rear:
Fendt 900 Vario connections at the front:
Hydraulic side support
60Get to your destination faster and haul more
the right thing for the new 900 Vario with a top speed of 60 km/h. To make sure you reach your destination safely, the 900 Vario is equipped with the latest safety features for tractors, such as ABS. You reach your destination faster and have transported more at the end of the day.
The Fendt 900 Vario for transport22 23
ABSinside
at reduced engine speed
suspension with locking function
braking system
The Fendt 900 Vario for transport
*in-house measurement
Maximum on-road and in-field driving safety Seven points for your comfort
Innovative combination of safety, speed and comfort
Without ABS and FSC
Speed sensor Wheel brake
Pressure limiting valve
ABS module
With ABS and FSC
Stability control (FSC)At speeds above 20#km/h, Fendt Stability Control (FSC) locks the compensation between the right and left sides and takes steering precision, driving stability and braking safety to a completely new level. When the driving speed drops below 15 km/h, compensation between the left and right side is possible again, which guarantees the best ground contact.
Wheels do not lockThe ABS module measures the speed on each individual wheel using four speed sensors. If the speed on one wheel is too slow, the ABS automatically opens the corresponding brake to prevent the wheel from locking. Since the wheels on tractors have a high inertia due to their size and weight, the ABS module also communicates with the tractor control unit. The control unit can then drive the affected wheel via the Vario transmission, if opening the brake is not enough to maintain the required speed. Both front wheels are controlled together to maintain the stability of the 900 Vario, even if there are different surfaces under each wheel. The rear wheels are controlled individually by the ABS module.
Self-levelling front axle suspensionThe hydropneumatic independent wheel suspension is equipped with a double wishbone axle, which optimises steering angle. The fully automatic level control ensures that suspension travel remains the same on both sides (up to eight tonnes of front axle load). Furthermore, the entire suspension travel can be run through manually, the joints and bearings are maintenance-free and have no lubri-cation points.
24
field of vision
around the tractor
lights
the!wheel arches
More information: www.fendt.com/900/details
Cutting-edge engine and transmission technology
360 degree illuminationMore visibility for more safetyt
Look forward and backward in all situations
Everything in view, even in the darkThe ingenious lighting concept on the 900 Vario doesn‘t leave you in the dark. Both the high and low beams provide a one-of-a-kind high level of illumination intensity. The work lights on the 900 Vario can be individually adjusted for up to 360 degrees of illumination. Xenon work lights are available as an option.
4 work lightsDriving light-brake and indicator
2 work lightsCorner lights Auxiliary lamps
Wide-angle mirror for a better overviewThe optional wide-angle mirror expands your field of vision, which provides significantly more safety. You have a better overview of things that are happening on the sides of the tractor. The hazard zone, which is usually located in the blind spot, is easier to see into and unforeseen situations can be avoided..
Additional areas visible with the wide-angle mirror
Areas visible without the wide-angle mirror
Indicator and position light
4 work lights on roof2 work lights on mudguard
Rear light, brake and indicator
Leading in all disciplinesWhether for classic agricultural applications or specialty operations for contracting, municipal or!forestry applications, the 900 Vario is highly qualified for all operations. To expand the operating spectrum even further, Fendt offers a factory-installed full-function reversing driver station. In this way you can perform a wide range of tasks with the 900 Vario and fully utilise your Fendt tractor for greater profitability..
Fendt versatility28
20
21
28
2722
17
23
8
9
10
1112
13
14
15
16
1819
1
2
4
7
35
25
26
24
6
1. Rugged cast frame 2. Front axle suspension (lockable and maintenance-free, 300 mm
suspension travel) with Fendt Stability Control
3. Suspension cylinder for front axle 4. Front linkage with external controls 5. Front PTO 6. 2 da hydraulic connections at the front 7. Planetary final drives 8. 7,8 l Deutz engine with 4 valves per cylinder 9. Cooler unit with viscous fan control 10. SCR catalytic converter 11. Continuously variable Vario transmission 12. Hydro motor 13. Hydraulic pump 14. Enclosed 4WD clutch 15. Turbocharger 16. Fuel tank with 600-l capacity 17. AdBlue tank 18. Planetary axle 19. 1,000 kg wheel weights for the rear wheels 20. X5-cab with integral automatic air-conditioning and 5.5 m2 glass
area
21. Pneumatic cab suspension 22. Armrest with Variocentre 23. Varioterminal with integral Fendt VarioGuide automatic steering
system
24. VarioGuide roof unit 25. Super Comfort Seat Fendt Evolution with
climate control and active suspension
26. Comfort passenger seat with automatic seat belt
27. Side view mirror, electrically adjustable, heated 28. External rear controls for linkage, PTO and one hydraulic control unit
Cutting-edge technology unitedIn the 900 Vario, start-of-the-art technology is optimally merged in a single vehicle, which gives professional farmers and business owners an economic edge.
The sum of the technical solutions create the technological lead
Technical Specifications
Fendt 924 927 930 933 936 939
EngineRated power (kW/hp) (ECE R24) 154 / 210 177 / 240 199 / 270 221 / 300 243 / 330 265 / 360Max. power (kW/hp) (ECE R24) 177 / 240 199 / 270 221 / 300 243 / 330 265 / 360 287 / 390Rated power (kW/hp) (EC 97/68) 3 183 / 249 194 / 264 217 / 295 238 / 324 261 / 356 276 / 376Max. power (kW/hp) (EC 97/68) 189 / 258 202 / 275 224 / 305 245 / 333 269 / 366 291 / 396No. of cylinders / cooling 6 / turbo / waterCylinder bore / stroke (mm) 110 / 136 110 / 136 110 / 136 110 / 136 110 / 136 110 / 136Cubic capacity (cm3) 7755 7755 7755 7755 7755 7755Rated engine speed (rpm) 2200 2200 2200 2200 2200 2200Engine speed at max. power (rpm) 1900 1900 1900 1900 1900 1900Max. torque (1450/rpm) 1049 1116 1234 1326 1498 1547Torque rise (%) 36 36 34 31 34 31Optim. fuel consumption (g/kWh) 195 195 195 195 195 195Fuel tank (l) 600 600 600 600 600 600AdBlue (l) 60 60 60 60 60 60Oil change interval (op. hrs.) 500 500 500 500 500 500
Transmission and PTOType continuously variable Vario transmission
0.02 bis 34 km/h / 0.02 bis 20 km/h Range II - road (forward / reverse) 0.02 bis 60 km/h / 0.02 bis 33 km/hMaximum speed (km/h)) 60 60 60 60 60 60Rear PTO (rpm) 540E / 1000 or 1000 / 1000EFront PTO (rpm) 1) 1000
Hydraulics and linkage160 or 216 160 or 216 160 or 216 160 or 216 160 or 216 160 or 216
Rear linkage control EPC EPC EPC EPC EPC EPC4 (3) el. valves
8 (4) el. valves / crossgate lever 8 (4) el. valves / crossgate lever
Max. lift capacity, rear power lift on the drawbar (kN/kp) 11800 11800 11800 11800 11800 11800Max. lift capacity, front linkage (daN) 5550 5550 5550 5550 5550 5550Implement weight / front linkage up to (kg) 4100 4100 4100 4100 4100 4100
Weights and dimensionsUnladen weight to DIN 70020 (kg) 10700 10760 10760 10760 10830 10830Perm. overall weight (kg)for 40 km/h / 50 km/h (single-circuit brake) 18000 /15000 18000 /15000 18000 /15000 18000 /15000 18000 /15000 18000 /15000for 40 km/h / 50 km/h (dual-circuit brake) 18000 18000 18000 18000 18000 18000for 60 km/h (dual-circuit brake) 16000 16000 16000 16000 16000 16000Maximum vertical hitch load with standard tyres at 60 km/h (kg)
2000 2000 2000 2000 2000 2000
Overall length (mm) 5655 5655 5655 5655 5655 5655Overall width (mm) 2750 2750 2750 2750 2750 2750Overall cab height (mm) 3322 3322 3322 3322 3322 3372Ground clearance (mm) 2) 480 480 480 480 480 480Wheelbase (mm) 3050 3050 3050 3050 3050 3050Track width front (mm) 2) 2100 2100 2100 2100 2100 2100Track width rear (mm) 2) 2050 2050 2050 2050 2050 2050Min. turning circle (m) 2) 6.08 6.45 6.45 6.45 6.58 6.58
Electrical equipmentStarter (kW) 4.7 4.7 4.7 4.7 4.7 4.7Battery (V/Ah) 12 / 170 12 / 170 12 / 170 12 / 170 12 / 170 12 / 170Alternator (V/A) 14 / 2x150 14 / 2x150 14 / 2x150 14 / 2x150 14 / 2x150 14 / 2x150
TyresStandard front Standard rear
540/65 R34 650/65 R42
600/65 R34 650/85 R38
600/65 R34 650/85 R38
600/65 R34 710/70 R42
600/70 R34 710/75 R42
600/70 R34710/75 R42
Optional front Optional rear
600/65 R34 710/70 R42
600/65 R34 710/70 R42
600/65 R34 710/70 R42
600/65 R34 800/70 R38
600/65 R34 800/70 R38
600/65 R34800/70 R38
Optional front Optional rear
600/70 R34 710/75 R42
600/70 R34 710/75 R42
600/70 R34 710/75 R42
600/70 R34 710/75 R42
710/60 R34 900/60 R42
710/60 R34900/60 R42
1) = optional, 2) = with standard tyres, 3) = definitive power specifications for registrationYour Fendt dealer will be pleased to inform you about further tyre options.
Standard and optional equipment Power Profi ProfiPlus
Chassis / safety featuresIndependent wheel suspension on front axle, 300 mm suspension travelDual circuit braking system, FSC Fendt-Stability-ControlSingle-circuit braking system, 1 pedal
ABS anti-lock braking system, pneumaticCompressed air systemAutomatic trailer steering axle lock
4WD / differential locksComfort engagement 4WD / differential lockRear / front differential with 100% disc locking
Power shift PTO
External rear PTO controls
Hydraulic systemLoad-sensing system with axial piston pump (160 l/min)Axial piston displacement pump 216 l/min delivery capa-cityElectrohydraulic power lift da (EPC), with external actuationElectrohydraulic linkage sa (EPC), with external actuationhydraulic lower link lateral stabilisationRadar anti-slip controlQC hydraulic top link Lower link hooks cat. 4 Hydraulic connection external (load-sensing)Hydraulic valve actuation crossgate lever, Multi-function joystickExternal controls for hydraulic control unit rearDouble connect-under-pressure lever couplings rearEasy ballast mounting for front weight 3) 3) 3)
Front linkage sa, with external actuationComfort front power lift da, with position control, external actuation
BodyManual hitchAuto. hitch with remote control, rearBall-type coupling, height adjustableBall-type coupling incl. frameForced steering (one or two-sided)Hitch couplingSwinging drawbarPiton fixCompressed air Duomatic couplingRotating beaconWide vehicle markersPivoting front mudguardsDual tyres rearDual tyres frontFront weights, various sizesWheel ballast weights rear wheelsDesign LineRemovable tool box1)= Operation with Varioterminal, 2) = including VarioGuide roof hatch, 3) = not possible with front lift
Standard and optional equipment Power Profi ProfiPlus
Vario controlsJoystick with cruise control and engine speed memoryMulti-function joystick with cruise control, engine speed memory, automated functions, controls for hydraulicsVarioterminal 7“ with both touchscreen and key controlVarioterminal 10.4“ with both touchscreen and key controlVariotronic implement control for ISOBUS 1)
Variotronic TI Headland Management SystemVario TMS - engine-transmission management systemVarioDoc - Documentiation systemVarioDoc Pro - Documentiation systemAutomated steering system ready kit 2) VarioGuide automated steering systemElectronic immobiliser
CabMechanical cab suspension, 3-pointPneumatic cab suspension, 3-point with integral levellingFendt Reaction steering systemReversing driver station for 2-way operationHeight and tilt-adjustable steering columnSuper comfort seat, air sprung, low frequency suspensionSuper comfort seat Evolution with climate controlSuper comfort seat Evolution with climate control and active suspensionPassenger seat with automatic seat beltComfort passenger seatRadio mounting kit with two stereo loudspeakersDual radio slot with four loudspeakersBlaupunkt Radio CD MP3 with sound systemRadio CD MP3 Blaupunkt with hands-free speaking system, sound systemTachographIntegral automatic air-conditioningToxic filter (aerosol)Rear window wash/wipeSide view mirror, electrically adjustable and heatedSide mirror mechanically adjustableWide angle mirrorInterior mirrorWork lights, 2x roof rear, 1x roof frontWork lights A-pillar, rear mudguardsWork light Xenon A-pillar, mudguard rear, roof frontLED rear lightsWork light LED A-pillar, mudguard rear Bracket for additional deviceAir-conditioned cool box
EngineAutomatic load limit controlFuel pre-filterHeated fuel prefilterPreheater package (engine, transmission, hydraulic oil)Exhaust brake
TransmissionShuttle function, Stop & Go functionAcoustic signal when reversing
Standard and optional equipment | = standard | = optional | = not available32 33
Makes business owners happy – investing right means savings in the long-termIt is clear that you get cutting-edge technology with a Fendt tractor. But there's much more to the overall cost picture of a Fendt Vario: from competent consultation, to comprehensive services up to the special value retention of a Fendt tractor.
Fendt overall profitability
The Fendt profitability
Efficiency: The recipe for successful economical operationsWe make no compromises when it comes to this subject matter, because our objective is to be the leader for cost-effectiveness per hectare and kilometre. Fendt engineers are constantly working on lowering fuel consumption, which makes up half of the total costs of a tractor. The very best technology is just
Vario drive train and the fuel-saving SCR technology in combination with TMS. These further increase the already first-class efficiency of the Vario and reduces the costs per hectare and kilometre.
Retention of value = future-proofing plus qualityEvery Fendt customer knows – things are settled at the end of the service life of a tractor. And this is a true joy for Fendt owners, because the resale value of
continually provides vital impulses and implements technology that continues to be in demand in the future. Add to that the high quality of Fendt tractors, which stands for operational reliability and a long lifetime. The total is a reten-tion of value that only Fendt can offer you. More freedom for investments – tailor-made financing through AGCO FINANCE and the ideal Service PackageA custom financing package with attractive conditions and flexible terms offers you an ideal opportunity to match your investment to the needs of your farm or business. AGCO FINANCE is your reliable partner for financing. With a Fendt Service Package, you have servicing and repair costs under control. When purchasing your tractor, you can already plan the prescribed service work based on attractive fixed prices or arrange for full cost control per operating hour – with the Service Package, or the comprehensive ProService Package.
34
www.fendt.com
Leaders drive Fendt
AGCO GmbH – Fendt-Marketing87616 Marktoberdorf, Germany
Fendt is a world wide Brand of AGCO. All data regarding delivery, appearance, performance, dimensions and weight, fuel consumption and running costs of the vehicles correspond with the latest information availa-ble at the time of going to press. Changes may be made befo-re the time of purchase. Your Fendt dealer will be pleased to supply you with up-to-date information.
939V/1.0-EN/09-12/8.0-E
