Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration...

28
Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA

Transcript of Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration...

Page 1: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

Maintenance "Personal Minimums"

Federal Aviation Administration

DOT/FAA

Page 2: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

2

Objective:

• Personal evaluation by the aviation maintenance technician before and after accomplishing a maintenance task.

Page 3: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

3

• The following areas should be considered before accomplishing the task to assure the task is completed to the highest level of safety.

BEFORE THE TASK

Page 4: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

4

Maintenance “Personal Minimums”

• Given a “Personal Checklist” with areas to be considered before and after the job task. The maintenance technician will be able to determine the task was completed to industry standards and self assessment.

Page 5: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

5

Do I have the knowledge to perform the task?• Formal Training• OJT Training• Self Study• Training specific to the task to be

accomplished.• Specialized Training• Recurrent Training

Page 6: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

6

Do I have the technical data to perform the task?• Manufacturer Maintenance Manuals• Aircraft Specifications/Type Data Sheets• Service Bulletins• Service Letters• Airworthiness Directives• Drawings/Blueprints• Supplemental Type Certificates

Page 7: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

7

Have I performed the task previously?• All the elements considered for the task.• Routine or complex operation.• Do I need training or supervision to complete

the task.• Regulation requires it.

Page 8: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

8

Do I have the proper tools and equipment to perform the task?• Calibrated tools• Test equipment• Specialized rigging tools• Special assembly and disassembly tools• Test Stands• Support Stands• Proper hoisting equipment

Page 9: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

9

Have I had the proper training to support the job task?• Aircraft or component type specific.• Specialized training .(Composites, NDT)• Complex skills needed• System specific• Human Factors training considerations

Page 10: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

10

Am I mentally prepared to perform the task?

• Stress from home or work situations.• Mental distractions-Thinking about other things.• Time-frames ( Pressures to get the job done )• Overload ( More work than you can handle )

Page 11: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

11

Am I physically prepared to perform the task?• Use of all our senses. ( Sight, hearing, smell,

touch, taste )• Rested• Environmental conditions• Healthy• Physical condition

Page 12: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

12

Have I taken the proper safety precautions?

• Protective clothing ( Gloves, goggles, etc.)• Personal safety equipment (ventilation

equipment, etc.)• Proper tools ( electric tools verses air tools )• Identification ( tagging, safety streamers, etc. )• Safety locks ( landing gear, etc. )

Page 13: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

13

Do I have the resources available to perform the task?• Money• Parts• Man Power• Facilities

Page 14: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

14

Have I researched the FAR’s to ensure compliance?• Current regulation review for the work be

accomplished.

• Am I able to determine that the regulation is applicable and appropriate for the task being performed?

• Review of Airworthiness Directives to assure I have completed all airworthiness requirements.

Page 15: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

15

• Review of all the areas that were affected to accomplish the task.

AFTER THE TASK

Page 16: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

16

Did I perform the task to the best of my abilities?• Self assessment to determine that the work

performed met all the methods, techniques and practices as prescribes by industry standards.

• Work was accomplished in a manner that was not less than what my performance was capable of.

Page 17: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

17

Was the job task performed to be equal to the original?

• Each person maintaining or altering, or performing preventative maintenance, shall do that work in such a manner and use materials of such a quality, that the condition of the airframe, aircraft engine, propeller or appliance worked on will be at least equal to its original or properly altered condition.

Page 18: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

18

Was the job task performed in accordance with appropriate data?• Each person performing maintenance.

alteration, or preventative maintenance shall use the methods, techniques, and practices prescribed in the manufactures maintenance manual or data acceptable to the administrator.

Page 19: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

19

Did I use all methods, techniques and practices acceptable to the industry?

• Each person performing maintenance, alterations, and preventative maintenance shall use the tools, equipment, and test apparatus necessary to assure completion of work in accordance with industry practices.

Page 20: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

20

Did I perform the job task without pressures, stress or distractions?

• Reevaluation of the job task may need to be considered if the job was accomplished under these conditions.

• As a reminder the aircraft must be in a condition for safe operation.

Page 21: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

21

Did I re-inspect my work or have someone inspect my work before return to service?

• Perform the inspection as to determine whether the aircraft or portions thereof under inspection, meets all applicable airworthiness requirements.

Page 22: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

22

Did I make the proper record entries for the work performed?

• Each person who maintains, performs preventive maintenance, rebuilds or alters an airframe, aircraft engine, propeller, appliance or component part shall make an entry in the maintenance record of that equipment.

• Major repairs and alterations shall be entered on a form ( FAA Form 337).

Page 23: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

23

Did I perform the operational checks after the work was completed?

• Must determine satisfactory performance in accordance with the manufacturers recommendations.

Page 24: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

24

Am I willing to sign the bottom line for the work performed?

• If the work performed on the aircraft, airframe, aircraft engine, propeller, appliance, or component part has been performed satisfactory, the signature, certificate number, and the kind of certificate held by the person approving the work.

• The signature constitutes the approval for return to service only for the work performed.

Page 25: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministration

25

Am I willing to fly in the aircraft once it is approved for return to service?

• The ultimate test for the work task accomplished.

• Assures confidence in the work performed.• Increases reliability. Decreases liability.• Maintains public trust.• Maintains integrity.

Page 26: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.
Page 27: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.
Page 28: Federal Aviation Administration Maintenance "Personal Minimums" Federal Aviation Administration DOT/FAA.

Federal AviationAdministrationMaintenance

“Personal Minimums” Checklist

Keep it close to your toolbox!