February 20, 2008 Objective: To understand heat transfer and the causes of phase changes Check-in...
-
Upload
ashton-sparks -
Category
Documents
-
view
215 -
download
3
Transcript of February 20, 2008 Objective: To understand heat transfer and the causes of phase changes Check-in...
February 20, 2008
• Objective: To understand heat transfer and the causes of phase changes
• Check-in Frayer Models• CW - Chapter 10 Notes• HW - Study for a super short Conduction
vs. Convection vs. Radiation Quiz Monday!
1
Ch 10 Heat Transfer & Change of Phase
These notes are available on the Moodle!
10.1 Conduction
Conduction- transfer of heat E by the collisions between particles in a substance. ( especially solids!)
Conductor- solids whose electrons can move freely.
Insulator- molecules that do not have mobile electrons. POOR CONDUCTOR.
EXAMPLES
GOOD CONDUCTORS
(Poor insulator)
Silver
Copper
Aluminum
Iron
INSULATORS
(Poor conductor)
Wood
Wool
Paper
Cork
Plastic
Air
10.2 Convection
Convection- transfer of heat E by the motion of fluids.
Fluid – any substance with molecules/atoms that are free to flow past each other.
Both gases and liquids are fluids!
Convection
Liquid- • molecules at bottom move faster,• spread apart & less dense.• Buoyed up, denser liquid moves to bottom.
Gases-• Warm air expands, rises, and then cools.• Stirs the atmosphere = windAIR heats up as compressed
10.3 Radiation
Transfer of Heat by means of electromagnetic radiation.
*** DO NOT CONFUSE W/ RADIATION INVOLVING ATOMIC NUCLEI***
Similar to when you drop a stone in a pond, or shake the end of a rope Electromagnetic radiation is caused by a vibrating charge (electron(s) in atoms on the sun).
Ex:radio wavesInfrared waves light waves (light bulb)
8
Wavelenth (λ) of radiation related to frequency &
Temperature
LONG WAVE = low frequency = cool
SHORT WAVE = high frequency = hot
Emission of Radiant EAll objects greater than 0 K emit some
radiant energy.• Frequency relative to temperature f ~ T
Ex: sun ,fireplace, lamp ↑ frequency, ↓ λ , ↑ temp
you feel high freq infrared waves as heat
Absorption of radiant energy
Objects emit & absorb radiant energy• Good emitters are good absorbers• Poor emitters are poor absorbers
Dark objects absorb & emit more radiant Energy
Ex: black vs white container of water in sun
Black warms faster & cools faster.
Temperature vs. Intermolecular Forces
Intermolecular Forces – attractive forces that exist between atoms/molecules of a substance.
Different strengths for different substances.
Determines what phase the substance will be at certain temperatures.Example: solids at 25°C have stronger IMF
that liquids, than gases do.http://www.pbs.org/wgbh/nova/zero/matter.ht
ml
10.5 Evaporation
A change of phase from liquid to gas.• Liquid – molecules constantly in
random motion & gain KE. as high E molecules break free of
surface, lower KE left in liquid (TEMP ↓).EVAPORATION IS A COOLING
PROCESS.Ex: sweat. evaporation cools skin.
Boiling Point: Part 1
Boiling is evaporation within a liquid• Evaporation occurs beneath surface of
liquid when boiling.• Bubbles (vapor) forms in liquid closest
to the heat source• Bubbles only form when pressure
equal to the pressure of the surroundings (atmosphere).
Boiling Point: Part 2
Boiling is evaporation at the surface of a liquid• Evaporation is always occurring at the
surface of a liquid, regardless of temperature.
• The vapor phase that exists above a liquid exerts a pressure called Vapor Pressure.
• When vapor molecules have enough KE to exert a pressure equal to that of the atmosphere then the substance is said to be boiling.
BP vs. Atmospheric Pressure
• ↑ atmospheric pressure requires a ↑ temp to boil.
Vapor molecules require more energy so that they can exert a pressure = to that of the atmosphere
• ↑altitudes = ↓ pressure
So in Denver, CO WATER BOILS AT LOWER TEMP. (95C) … takes longer to cook.
10.6 Condensation
A change of phase from a gas to a liquid.• Molecules at liquid’s surface do not
have enough KE to overcome IMF and are “attracted to liquid”
• Collisions with the surface transfer KE.• KE is absorbed by the liquid.
CONDENSATION IS A WARMING PROCESS
9.8 Thermal Expansion
• Molecules jiggle and move farther apart when heated.
• Most substances expand when heated & contract when cooled.
• i.e. solids are more dense then liquids, then gases for most substances.
• Exception: Water contracts until 4 C , then forms crystalline structure w/ open spaces and expands.
Expansion of H2O
• Ice :Hexagonal , open structure
• Ex: Melt ice cube, H2O less volume
10.8 Melting & freezing- opposite directions in phases changes.
Melting – substance changes from solid → liquid.
When heated, molecules gain KE, vibrate more and attractive force between molecules is overcome.
SOLID MELTS
Freezing - liquid changes to solid
As E is removed from liquid, molecular motion slows. IMF take over & molecules bind together and vibrate in fixed positions.
H2O w/o impurities - freezes at 0C.
w/ impurities - < 0C• foreign molecules change the vapor
pressure to less than that of pure water.
SUBLIMATION
Molecules of a solid are transformed directly into gas phase.
BP for a substance describes when the vapor molecules exert a pressure equal to that of the atmosphere.
Sublimation occurs when vapor molecules at the surface of a solid exert a pressure greater than that of the atmosphere at room temperature.
Phase Diagrams
• Under different conditions of temperature and pressure substances will exist at either solid, liquid or a gas.
Phase changes
• TRANSFER OF HEAT occurs whenever matter changes phases.
solid→liquid→gas→plasmaGaining thermal energy
Plasma→gas→liquid→solidLosing thermal energy
10.9 Energy & Phase Change
1st Law defines parameters for heat transfer under conditions of constant pressure (our atmosphere).
– Specifically, the gain or loss of thermal energy equals the amount of heat transferred.
Enthalpy (H) – the term used to describe heat absorbed or released under constant pressure.
Energy is needed for a change of phase
ΔH system = ΔH surrounding or…
Energy lost by the system must equal energy gained by the surroundings.
Energy may cause an increase in Temp OR a phase change!
Changing Phase
Melting PointBoiling Point
Changes in state require energy!Add KE and TemprisesAt BP/MP temp stopsrising and E used to break IMF
Heat of fusion
• Amount of E needed to change
Solid ↔ liquid.
Heat of fusion of H2O = 335 J/ g H2O
Heat of vaporization
• Amount of E required to change a substance from liquid ↔ gas
heat of vaporization of H2O = 2255 J/g H2O
• End of chapters 9 & 10