FEATURES & SPECIFICATIONS Type INTENDED USE · 2-1/2 4-1/8 7 All dimensions are inches...

4
DECORATIVE TRACK LIGHTING LTIHSPLT HEAD-LED-GEN2 Decorative Track Lighting LTIHSPLT SERIES Integrated LED Track Head FEATURES & SPECIFICATIONS INTENDED USE This fresh and innovative track head combines aesthetics with superior functionality for applications such as specialty retail, grocery, galleries, museums, hospitality, residential and educational environments. CONSTRUCTION Lamp holder: The “Spotlight” lamp holder with integral electronic driver is made of steel. Tilt: 60 degrees Pan: 350 degrees Note: Lithonia Decorative Track Lighting components are not compatible with Lithonia Commercial Track Lighting components. Installation of mixed components will result in risk of shock hazard or fire, damage of fixture, failure to illuminate, and it does not meet UL standards. Expected life: 35,000 hours - L70 lumens depreciation design criteria. Lumen output: 500 lumens, 40° beam angle. Color temperature (CCT): 2700 K CRI: 80 ELECTRICAL 120 VAC 60Hz, 8.6-watts LISTINGS C ETL US listed to UL1574 Track Lighting Standard. ENERGY STAR® certified. Dry location. WARRANTY 5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx. Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25°C. Specifications subject to change without notice. Specifications Width Length Maximum height 2-1/2 4-1/8 7 All dimensions are inches (centimeters) unless otherwise indicated. Series LED, Lumen output Color temperature Finish LTIHSPLT Integrated LED “Spotlight” track head LED 8.6W, 500 lumens 27K 2700 K ORB Oil-rubbed bronze ORDERING INFORMATION All configurations of this product are considered “standard” and have short lead times. Example: LTIHSPLT LED 27K ORB Catalog Number Notes Type L W H

Transcript of FEATURES & SPECIFICATIONS Type INTENDED USE · 2-1/2 4-1/8 7 All dimensions are inches...

DECORATIVE TRACK LIGHTING LTIHSPLT HEAD-LED-GEN2

Decorative Track Lighting

LTIHSPLT SERIESIntegrated LED Track Head

FEATURES & SPECIFICATIONSINTENDED USE

This fresh and innovative track head combines aesthetics with superior functionality for applications such as specialty retail, grocery, galleries, museums, hospitality, residential and educational environments.

CONSTRUCTION

Lamp holder: The “Spotlight” lamp holder with integral electronic driver is made of steel.

Tilt: 60 degrees

Pan: 350 degrees

Note: Lithonia Decorative Track Lighting components are not compatible with Lithonia Commercial Track Lighting components. Installation of mixed components will result in risk of shock hazard or fire, damage of fixture, failure to illuminate, and it does not meet UL standards.

Expected life: 35,000 hours - L70 lumens depreciation design criteria.

Lumen output: 500 lumens, 40° beam angle.

Color temperature (CCT): 2700 K

CRI: 80

ELECTRICAL

120 VAC 60Hz, 8.6-watts

LISTINGS

CETL

US listed to UL1574 Track Lighting Standard.

ENERGY STAR® certified.

Dry location.

WARRANTY

5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.

Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25°C. Specifications subject to change without notice.

Specifications

Width LengthMaximum

height2-1/2 4-1/8 7

All dimensions are inches (centimeters) unless otherwise indicated.

Series LED, Lumen output Color temperature Finish

LTIHSPLT Integrated LED “Spotlight” track head LED 8.6W, 500 lumens 27K 2700 K ORB Oil-rubbed bronze

ORDERING INFORMATION All configurations of this product are considered “standard” and have short lead times. Example: LTIHSPLT LED 27K ORB

Catalog Number

Notes

Type

L

W

H

LTIHSPLT HEAD-LED-GEN2

DECORATIVE TRACK LIGHTING: One Lithonia Way Conyers, GA 30012 Phone: 800-533-7728 Fax: 855-209-6364 www.lithonia.com © 2013-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/24/17

LTIHSPLT LED Integrated Track Head

PHOTOMETRICS

Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at 30” Above Floor for a Single Luminaire

LTIHSPLT ORB, 2700 K LEDs, input watts: 8.8, delivered lumens: 576, LM/W = 65, test no. LTL28687, tested in accordance with IESNA LM 79-80

0° 20°

40°

60°

80°

400

800

Ave Lumens05152535455565758590

10079596743801532692000

8718617395248200

Zone Lumens % Lamp0° - 30°0° - 40°0° - 60°0° - 90°

90° - 180°0° - 180°

446.1541.5573.8576.10.0

576.1

77.494.099.6100.00.0

*100.0*Efficiency

%02fppc 80% 70% 50%pw 50% 30% 10% 50% 30% 10% 50% 30% 10%012345678910

1191111049892868277737066

1191091009387817672686461

119107978983777268646157

1161091029691868177736966

116107999286807671686461

116105968882777268646057

111105999489847975726865

111103969084797571676461

111102948781767167646057

RC

R

50% beam -35.7°

10% beam -67.7°

MountingHeight

Inital FCCenterBeam Diameter FC Diameter FC

8.010.012.014.016.0

33.317.911.27.65.5

3.54.86.17.48.7

16.69.05.63.82.8

7.410.112.715.418.1

3.31.81.10.80.6

LED LAMP AND DIMMER COMPATIBILITYManufacturer Lutron Leviton Pass & Seymour Cooper Synergy/Leviton Insteon Sensorswitch

Model #

CTCL-153P-WH 6633-PA LS 603 PWV DLC03P-W Devine ISP 120 600 2477D nSP5 PCD 2W

DV-603P-LA 6615-P H703PNICCV4 ISD 1000 I 120 / IPI10 nSP5 PCD ELV 120

CT-603PR-WH IPSD6 ISD 400 ELV 120 / IPE04

DVELV-300P

S-600P

300P SELV

DV-600P

NTELV-300P

NLV-600

Note: Most Forward-phase dimmers have a minimum load requirement of 40-60 watts. A single 8W LED lamp on a 600W dimmer may flicker if the minimum load requirement is not met; consider a synthetic minimum load, LUTRON-LBX or other equivalent. This requires a 2-gang wall box and additional wiring to the dimmer.

Depending on the quantity of LED lamps on the dimming circuit, an approximate 10% to 100% dimming range may be obtainable. Most available dimmers were designed around older technology and resistive or incandescent lamp loads; therefore, performance can vary with LED load and is not guaranteed. Please see the manufacturer’s instructions on dimmers for use with LED lamps and do not exceed the 150W LED load for 600W rated dimmer.

LTIHSPLT HEAD-LED-GEN2

DECORATIVE TRACK LIGHTING: One Lithonia Way Conyers, GA 30012 Phone: 800-533-7728 Fax: 855-209-6364 www.lithonia.com © 2013-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/24/17

LTIHSPLT LED Integrated Track Head

ADDITIONAL DATA

LTIHSPLT HEAD-LED-GEN2

DECORATIVE TRACK LIGHTING: One Lithonia Way Conyers, GA 30012 Phone: 800-533-7728 Fax: 855-209-6364 www.lithonia.com © 2013-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/24/17

LTIHSPLT LED Integrated Track Head

TRACK ACCESSORIESLive End Conduit Floating Feed

Connects to the end of the linear track section supplying power from a conduit feed.

Permits track to be wired anywhere along track length.

Series Finish Series Finish

LTLECF (blank) Matte white connector with black cover

LTFC (blank) Matte white connector with black and white cover

L Connector Live End Junction Box Feed

Joins two track sections to make a 90° angle.

Connects to the end of the linear track section supplying power from a junction box.

Series Finish Series Finish

LTLDC (blank) Matte white connector with black cover

LTLLEDC (blank) Matte white connector with black cover

Straight Connector Live End Power Feed

Joins two track sections in a straight run.

Permits track to be connected to grounded outlet using a 15' cord with switch included.

Series Finish Series Finish

LTCV (blank) Matte white connector with black cover

LTLECS (blank) Matte white

T Connector Monopoint

Joins three sections at 90° angles.

Allows for a single linear track head to be installed into an existing junction box.

Series Finish Series Finish

LTTC (blank) Matte white connector with black cover

LTMPR (blank) Matte white

Track Stick

4-foot or 8-foot, 1-circuit track section with end caps.

Series Finish

LTS4 MW Matte white

LTS8 DBL Black