FEATURES & BENEFITS Product Guide Final.pdf · FEATURES & BENEFITS 98% Bromochloro dimethyhydantoin...

FEATURES & BENEFITS

Unique formula to produce higher chlorine efficiency

Contains less cyanuric acid than traditional chlorine tablets

Higher pH than traditional chlorine tablets

Continued use will make water gentle on swimmer’s eyes and skin

Does not cause cloudy water

Contains anti-scaling agents

For use in a chlorine feeder

1.0-1.5 ppm of Forever Clear Tabs can treat just as effectively as 2-3 ppm of traditional chlorine

APPLICATION

Adjust water balance and stabilizer levels

Initial Use: Adjust feeder to the highest possible setting that allows chlorine into the pool. After 1-2 days make any necessary adjustments to achieve a residual of 1.0-1.5 ppm.

Test chlorine levels frequently to ensure proper chlorine ppm

Tablets may be fed into skimmer, however the tablet may dissolve at a higher rate

Do not add other products to the skimmer while Forever Clear Tabs are in the skimmer

SIZES | 4 LB. | 10 LB. | 15 LB. | 25 LB. | 50 LB.



The ultimate compressed stabilized chlorine tablets!

1" CHLOR-GUARD TABS3" CHLOR-GUARD TABSCHLOR-GUARD STICKS

FEATURES & BENEFITS

99% Sodium trichloro-s-triazinetrione

90% available chlorine

Created without gummy binders

Slow dissolving, long lasting

Stabilized chlorine, protected from UV rays

Ideal for chlorinator and skimmer applications

Provides steady levels of chlorine into pool

APPLICATION

Adjust water balance and stabilizer levels

Add product to automatic feeder

Initial Use: Adjust feeder to the highest setting. After 1-2 days make adjustments to dispenser to achieve desired chlorine ppm

Chlorine levels should be maintained between 1-3 ppm . Test chlorine levels frequently to ensure proper ppm.

If feeding chlorine through the skimmer, do not add other products to the skimmer while product is in the skimmer. Avoid turning off pump to prevent bleaching of surfaces

Swimming pool water can be a breeding ground for many microorganisms. When microorganisms such as bacteria, fungus and algae thrive, pool water will begin to appear uninviting. More importantly, users of the water may become ill. We control and eliminate the growth of these types of microorganisms by adding a disinfectant to the pool water. Disinfectants in the Caribbean Blue line that accomplish this are referred to as Sanitizers.

All of the Caribbean Blue Sanitizing products, with the exception of Brominating Tabs, are forms of Stabilized Chlorine. Stabilized Chlorine is a type of chlorine that has been “pre-bonded” with a stabilizer (cyanuric

acid) to prevent the chlorine from depleting rapidly in the presence of ultra-violet (UV) light. Stabilized Chlorine is ideal for residential pools because it is convenient to use and long lasting. Although these types of chlorines are stabilized, in order to prevent any unnecessary chlorine loss it is recommended to increase cyanuric acid levels for freshly filled pools or pools with low cyanuric acid levels using Caribbean Blue Sunblock. Levels of stabilizer in residential chlorine pools, using Sunblock, should be maintained between 30-100 ppm. In certain states or counties, levels at commercial properties may need to be maintained at more precise levels.

High compression tablets using stabilized chlorine for continuous sanitizer introduction.

SIZES | 5 LB. | 16 LB. | 25 LB.

3" FOREVER CLEAR TABS

SANITIZER INTRODUCTION Impact of sunlight on chlorine residual

Hours

50-100 PPM CYA

25 PPM CYA

0 PPM CYA

100

90

80

70

60

50

30

20

10

0 3 4210

40

% C

hlo

rin

e R

emai

nin

g

SIZES | 4 LB. | 10 LB. | 25 LB.


SIZES | 4 LB. | 10 LB. | 25 LB.

SIZES | 5 LB. | 16 LB. | 25 LB.

2

FEATURES & BENEFITS

98% Bromochloro dimethyhydantoin

pH 4.0

Algaecidal proprieties

Lower odor than chlorinating compounds

Effective in various pH ranges

Less skin irritability than chlorine

Ideal for spas and indoor pools

APPLICATION

Adjust water balance to desired levels

Add product to automatic feeder.

Initial Use: Adjust feeder to the highest setting. After 1-2 days, make adjustments to dispenser to achieve desired bromine ppm.

Bromine levels should be maintained between 3-5 ppm. Test bromine levels frequently to ensure proper ppm.

If feeding bromine through the skimmer, do not add other products to the skimmer while product is in the skimmer. Avoid turning off pump to prevent bleaching of surfaces.

FEATURES & BENEFITS

Sodium dichloro-s-triazinetrione


pH is slightly lower than neutral

Stabilized chlorinating product

Fast acting

Granules are completely soluble

In moderate doses, will not affect pH

Ideal for small swimming pools

APPLICATION

Chlorine residual should be maintained between 1 to 3 ppm

Apply product when pool is not in use and with the pump running. Ideal application is after dusk.

Broadcast product over entire surface of the water. Brush any un-dissolved material off surfaces.

Initial Dose: Add 3 to 4 ounces per 10,000 gallons of water

Maintenance Dose: For most pools, add 1 to 2 ounces per 10,000 gallons daily

1" brominating tablets for continued sanitizer introduction to water. Contains BCDMH.

When a chlorine sanitizer enters the water it forms hypochlorous acid (HOCl), typically referred to as free available chlorine (FAC). This particular acid will kill or inactivate microorganisms in water. It is important to note that pH determines how active HOCl is in the pool water. The higher the pH the less active HOCl is. Conversely, the lower the pH the more active HOCl will be (see chart).

It would seem logical to keep pH low to keep HOCl active in the water. However, a consistently low pH will be harmful to the pool and the equipment! Additionally, low pH makes for uncomfortable swimming or bathing conditions. The ideal pH range in pools and spas is 7.2-7.6. Within this range HOCl peaks while maintaining a desirable pH.

Caribbean Blue Forever Clear Tabs are partially blended with a unique formula which allows chlorine to more efficiently kill and inactivate microorganisms in pool water.

When bromine is used as a sanitizer, it too forms an acid when it enters the water. This particular acid is called hypobromous acid (HOBr). Compared to HOCl, active HOBr is not as greatly impacted when pH levels are elevated. For this reason, bromine is a better sanitizer when pH in water rises constantly. Rising pH occurs often in hot tubs and pools with unique water features.

Use daily to maintain and as needed to increase sanitizer levels.

BROMINE AND STABILIZERCaribbean Blue Bromine Tabs CANNOT be stabilized from the affects of UV rays. Both unstablized chlorine and bromine will evacuate pool water at an equally rapid rate.

BROMINE TABS SIZES | 25 LB. | 50 LB.

CHLOR-GUARD GRANULES SIZES | 2 LB. | 4 LB. | 1O LB. | 25 LB.

pH

HOBr

HOCI

100

90

80

70

60

50

30

20

10

7.8 8 8.27.2 7.56.5 760

40

% o

f A

ctiv

e Sa

nit

izer

Impact of pHon Sanitizer Production

3

FEATURES & BENEFITS


Normal dosages will not affect pH

Ideal for vinyl liner pools

Rapid dissolving product

Leaves no residue

Does not affect water hardness levels

Does not cloud water

No pre-dissolving necessary

APPLICATION

Clean filter as needed and balance water



With heavy use or in warmer weather conditions, dose may need to be increased to 1 pound per 6,000 gallons

Use weekly or after heavy swimmer use, heavy rain or wind

FEATURES & BENEFITS

Reacts quickly to improve sparkle and help prevent pH bounce

Provides useful oxidation preventing the formation of combined chlorine

Compatible with pools using chlorine, bromine, copper-silver ionization and chlorine generators

Can be used in any pool, ideal for vinyl lined pools

Gently scented

Will not bleach or fade vinyl liners

APPLICATION

Clean filter as needed and adjust water balance


In most cases, 1 pound treats 10,000 gallons of pool water

Use weekly, before or after heavy swimmer use

Allows quick access to the pool within 15 minutes

Wait 1 day before testing for available chlorine (FAC)

FEATURES & BENEFITS

Contains our patented Calcibor® chemistry

Does not cause over stabilization; contains no cyanuric acid

Buffers pH and alkalinity

Closer to pH neutral than traditional calcium hypochlorite

Safer to use than traditional calcium hypochlorite

Helps maintain Caribbean Blue Forever Clear Advantage levels in water

Available in easy to use premeasured 1 pound bags

Less TDS than liquid chlorine

APPLICATION


Add when pool is not in use and with the pump running. Ideal application is after dusk.

For non bleachable surfaces, add product to pool by broadcasting over surface of the water

For all other surfaces, dissolve product into a clean pail of water, then disperse over pool water surface

In most cases use 1 pound per 10,000 gallons of water


Reentry to pool is permitted once chlorine levels are 3.0 ppm or less

The power of chlorine combined with pH buffers and added clarifiers.

Chlorine-free oxidizing shock with added clarifiers, buffers and stain preventatives.

Calcium hypochlorite blended with our borate technology effectively oxidizes pool water

COMPLETE OXIDIZING SHOCK

SIMPLY SHOCK & SWIM PLUS

FOREVER CLEAR SHOCK

SIZES | 1 LB. | 25 LB.

SIZE | 1 LB.


4

FEATURES & BENEFITS

Non-chlorine oxidizer will not raise chlorine levels

Provides useful oxidation preventing the formation of combined chlorine

Compatible with pools using chlorine, bromine, copper-silver ionization and chlorine generators

Can be used in any pool, ideal for vinyl lined pools

Restores sparkle and clarity to dull water

Will not bleach or fade vinyl liners

APPLICATION



In most cases, 1 pound treats 10,000 gallons of pool water

Use weekly, before or after heavy swimmer use

Allows quick access to the pool within 15 minutes

Wait 1 day before testing for available chlorine (FAC)

FEATURES & BENEFITS

Sodium dichloro-s-triazinetrione


pH is slightly lower than neutral

Fast acting

Granules are completely soluble

Ideal for small swimming pools

APPLICATION




For normal use, add 1 pound per 10,000 gallons of water with the pump running

With heavy use, dose may need to be increased to 1 pound per 8,000 gallons of water

Use weekly or after heavy swimmer use

Entry to pool is permitted once chlorine levels are 3 ppm or less

FEATURES & BENEFITS

70% Calcium Hypochlorite

pH 11

No pre-dissolving required*

Does not increase cyanuric acid levels

Compatible with all sanitizing systems except biguinide

APPLICATION


Apply product when pool is not in use and with the pump running. Ideal application is after dusk

Broadcast product over the entire deep end of the water. Brush or vacuum any un-dissolved material off surfaces.*

For normal use, add 1 pound per 15,000 gallons of water with the pump running


Reentry to pool is permitted once chlorine levels are below 4 ppm

Fast acting, non-chlorine oxidizing treatment for swimming pools. Blended with our borate technology.

Ideal for openings and closings

Concentrated un-stabilized chlorine granules for routine maintenance.

MICROFLOC SHOCK

QUICK SHOCK

TIDAL WAVE 73


SIZE | 1 LB.


5

FEATURES & BENEFITS

Polyethylene-dichloride

60% solution

Non-foaming and Non-staining

Effective against all types of algae

pH neutral

Works in a wide pH range

Not affected by high chlorine residual

Consistent use can reduce the amount of chlorine normally required

PREVENTION APPLICATION

The dosages below are for those pools opening for the season or those that wish to start an algaecide program. The weekly maintenance dose should be added more frequently if the pool is exposed to heavy rain or windy conditions.

ALGAE TREATMENT APPLICATION


If present, treat for metals or high calcium levels with appropriate stain and scale product

Add the appropriate amount of product using the chart below

For best results, when using this product in conjunction with a superchlorination treatment, circulate for several hours before proceeding with the superchlorination treatment

Ideal treatment for service professional. High chlorine levels will not affect product performance.

Initial treatment

per 10,000 gallons

6 - 11 oz.

Weekly maintenance dose after

initial treatmentper 10,000 gallons

2 - 4 oz.

Treatment dose for light to

moderate algae per 10,000 gallons

11 - 17 oz.

These products are compatible with chlorine, bromine, and mineral sanitizers. Different concentrations to suit your market needs.

ALGAE DEFENSE 60 SIZE | 1 QT.

FOREVER CLEAR ALGAECIDE SIZE | 1 QT.

Prevent is compatible with all sanitizing and maintenance systems. Effective for preventing and eliminating algae

Algae in swimming pool water is a concern for anyone who takes care of a pool. Millions of algae spores are carried by the wind daily and in addition, some source water may already have algae present in it. Fortunately, algae in pool water is typically not harmful to pool users. However, water with algae is not very inviting.

Algae types are categorized by color

• GREEN: This algae is the most common algae seen in pool water and typically the easiest to control and eliminate.

• YELLOW/BROWN: This algae, has a wispy appearance and is often referred to as Mustard algae. Chlorine alone typically does not rid a pool of yellow algae. Instead, a specialty algaecide must be used for successful removal.

• BLACK: Typically appearing as spots, black algae is one of the more difficult algae to remove. A coating forms over the algae to protect it from treatment products. Vigorous brushing of the trouble area must occur to help remove black algae.

It is easier and far less expensive to prevent algae than to treat the pool once algae is visible. Sanitizing, shocking pool water, and regular use of algaecides will prevent algae growth. To further combat algae, pool surfaces should be brushed weekly. Brushing prevents algae from settling and thriving on surfaces. Additionally, brushing will break up dead pockets of stagnant water in pools where algae thrives.

ALGAE IN POOLS

FEATURES & BENEFITS

50% quaternary ammonium chloride

Non-staining

Effective protection against all types of algae

Economical

pH neutral

Decreases maintenance time


Initial Dose: 32 ounces per 10,000 gallons of water

Maintenance Dose: 5 ounces per 10,000 gallons of water weekly


Clean filter as needed and adjust water balance.

If present, treat for metals or high calcium levels with Caribbean Blue Scale & Metal Solution

Add 32 ounces per 10,000 gallons of water

For best results, when using this product in conjunction with a superchlorination treatment, circulate for several hours before proceeding with the superchlorination treatment.

6

KILL & CLEAR

MUSTARD OUT

SIZE | 1 QT.

SIZE | 2 LB.

FEATURES & BENEFITS

Sodium bromide

Non-staining

Effective against all algae

EPA registered as an algae remover

Chlorine exciter

Small dosages needed

Highly effective in pools with mustard (yellow) algae


Clean filter as necessary

Balance pH between 7.4 and 7.6

Apply 4 ounces per 10,000 gallons of water in the problem areas of the pool

You may double the dose to 8 ounces per 10,000 gallons depending on severity of conditions

Avoid overdosing!

Brush areas affected with algae outbreaks

After adding Mustard & Black Magic immediately apply to the pool 1 pound of Quick Shock for every 10,000 gallons of water. Continuously circulate pool and filter until pool clears

FEATURES & BENEFITS

Polymer algaecide blended with copper complex

Destroys all resistant strains of algae

Non-foaming

pH neutral

Compatible with bromine or chlorine pools

Additional clarifiers added to speed pool recovery


Clean filter as necessary


Apply to pool 1 pound of Quick Shock per 10,000 gallons of water, wait 2 hours

To remove visible algae growth, add an initial dose of 18 to 24 fluid ounces per 10,000 gallons of water

Algae occurring in deep cracks or crevices may require additional scrubbing and vacuuming

Continuously circulate water during treatment


Initially, add 16 fl ounces per Poly Magic per 10,000 gallons Add 4 fl ounces per 10,000 gallnos weekly there after

FEATURES & BENEFITS

Liquid copper blend formulation

Concentrated algaecide

Heavily chelated copper

Compatible with bromine or chlorine pools

pH neutral

Non-foaming

Highly effective against all algae types

Continuously effective even after initial treatment



Best results occur when water temperature is above 60 degrees and when outdoor conditions are sunny

Apply to pool 1 pound of Quick Shock per 10,000 gallons of water, wait 2 hours

Dilute product in a pail of water to achieve greatest coverage in pool

For light algae outbreaks add 4 ounces per 10,000 gallons

For medium or heavy outbreaks add 12 ounces per 10,000 gallons

Continuously circulate water during treatment

After water clears and is free from algae, add Caribbean Blue Scale & Metal Solution

Our unique blend contains a 20% broad spectrum algaecide with the perfect amount of heavily chelated copper. Excellent prevention to all water.

Our dry algae terminator will easily remove green and yellow strands of algae in most bodies of water

KNOCK OUT SIZE | 1 QT.

The most effective algae treatment available. Destroys and prevents algae growth regardless of type.

7

SUNBLOCK SIZES | 4 LB. | 10 LB

FEATURES & BENEFITS

Contains: Cyanuric acid

Slow dissolving granular product

Reduces chlorine loss due to UV rays

For most pools a once a year water treatment

APPLICATION

Apply only as needed with the pump running.

Table shown indicates application rates

If pool is equipped with plastic piping UV Shield may be added to the skimmer VERY SLOWLY.

UV Shield can be broadcasted across the surface of the pool. Though safe for all surfaces, un-dissolved material should be brushed or SLOWLY vacuumed.

Continuously run pump for 24-48 hours. Avoid backwashing filters during this time.

OVERSTABILIZATION

In residential swimming pools, the ideal range of UV Shield is 30-70 ppm. When these levels exceed 100 ppm, the rate at which sanitizers and oxidizers perform their job in the water decreases rapidly. Water above 100 ppm can remain crystal clear; however those pools could be one pool party away or one bad storm away from a potential water issue that may not be able to be solved unless UV Shield levels are reduced. The only way to safely remove UV Shield from water is to partially drain water from the pool and replace with fresh new water.

Prevents loss of chlorine to the ultraviolet rays of the sun. Reduces pool operating costs.

FEATURES & BENEFITS

Contains: Calcium carbonate

Granular product

Eliminates a cause of pool components failing prematurely

APPLICATION

Apply as needed, with pump running, using the table below. When increasing hardness more than 30 ppm, divide the dosage into thirds and apply every two hours.

AQUA PREP 30

FEATURES & BENEFITS

Contains: Sodium hydrogen carbonate

pH 8.2

Powdered product

Prevents “pH bounce”

APPLICATION

Apply as needed, with pump running, using the table below. When increasing alkalinity more than 30 ppm, divide the dosage into thirds and apply every two hours.

AQUA PREP 10 SIZES | 5 LB. | 10 LB. | 25 LB.SIZES | 4 LB. | 10 LB. | 25 LB.

FEATURES & BENEFITS

Contains: Sodium carbonate

pH 11.4

Granular product

Prevents corrosion and protects surfaces

APPLICATION

If a pH base test cannot be performed, add this product using the table below.

AQUA PREP 20 SIZES | 2 LB. | 5 LB. | 10 LB.

FEATURES & BENEFITS

Contains: Sodium bisulfate

pH <1 (5% solution)

Granular product

Also known as “dry acid”

Prevents scaling

APPLICATION

If an acid demand test cannot be performed, add this product using the table below.

AQUA PREP 25 SIZES | 3 LB. | 14 LB.

pH LevelDosage per 10,000

gallons of water

7.8 - 8.0 12 oz.

8.0 + 1.5 lbs

pH LevelDosage per 10,000

gallons of water

6.8 - 7.1 1 lb

< 6.8 1.5 lbs

Calcium Level Increase

Dosage per 10,000 gallons

of water

10 ppm 1.2 lbs

30 ppm 3 lbs

50 ppm 6 lbs

Alkalinity Level Increase


of water

10 ppm 1.4 lbs

30 ppm 3.5 lbs

50 ppm 7.0 lbs

Increases the pH of pool water for proper balance. Protects metal fixtures and parts from corrosion. Ideal range 7.2-7.6

Lowers pH and alkalinity in pool water. Safer to use than liquid acid. Ideal range 7.2-7.6

Raises calcium hardness to prevent long term damage to the pool and its equipment. Ideal range 200-400 ppm.

Dry granular product to raise total alkalinity. Ideal range 80-120 ppm.

To Raise CYA Levels


of water

10 ppm 1 lb

30 ppm 2.5 lbs

50 ppm 4 lbs8

Having customers use the Caribbean Blue Forever Clear Advantage Program will result in great looking pool water and customers returning to your store

FEATURES & BENEFITS

Water is noticeably more comfortable to swimmers

Time balancing water is reduced

Inhibits scale from accumulating on surfaces and equipment

Reduces filter maintenance

Improves water clarity

Compatible with ALL sanitizers

Not affected by UV rays

Increased sanitizer efficiency

May help in reducing operating costs by 30-50%

APPLICATION


Apply product when pool is not in use and with pump running

DO NOT add product to the skimmer. Add directly to the pool by broadcasting product over the surface of the water.

To maintain all the benefits of Caribbean Blue Forever Clear Advantage, a residual should be maintained between 30-50 ppm.

Basic introduction of Caribbean Blue Forever Clear Advantage should be 2 pounds for every 1,000 gallons of water. For best and long lasting results add 3.4 pounds for every 1,000 gallons of water.

Calculate total amount needed to be added to the pool. Add ½ the total dose then adjust pH afterwards. Apply the remaining ½ dose at least 8 hours after the first application.

Brush or vacuum any un-dissolved material off the surface bottom.

Caribbean Blue Forever Clear Advantage will make pool water look and feel great. Great water will turn customers into returning customers.

Forever Clear Advantage Dosage ChartNumber of pounds to raise Forever Clear Advantage level by:

Gallons 10 ppm 20 ppm 30 ppm 40 ppm 50ppm

5,000 3.5 lbs 7 lbs 10 lbs 14 lbs 17 lbs

10,000 7 lbs 14 lbs 20 lbs 27 lbs 34 lbs




FOREVER CLEAR ADVANTAGE SIZES | 20 LB. | 45 LB.

TO MAINTAINSanitize DAILY with Forever Tabs or Chlor-Gaurd Tabs Everyday a chlorine (or bromine) product needs to be introduced to the pool. Chemical feeders make this job easy for the homeowner, especially if they are built into the equipment of the pool.

Shock WEEKLY with any shock Removing all the extra containments in swimming pool is a must. All of our products are packaged in convenient pre-measured 1 pound bags.

Clear pool WEEKLY with Micro Clean or Algae Desfense 60 Consistent additions will maintain sparkling clear water, while reducing the amount of sanitizer used.

TO START Add Caribbean Blue Forever Clear Advantage to your pool. This initial step will help ready the pool for the season and help make everything else added to the pool more effective. Additionally, Caribbean Blue Forever Clear Advantage, softens the water, and water balance becomes easier.

9

FOREVER CLEAN SIZE | 1 QT.

All natural and biodegradable water additive to speed up the digestion of material in water

FEATURE & BENEFITS

Broad-spectrum

Super concentrated

Speeds the digestion and removal of organic contaminants

Does not affect pH

Made from all natural ingredients

Biodegradable

Deprives bacteria of their primary food source

Improves water quality and clarity

Reduces filter maintenance

Product effectiveness increases as water temperature rises

Continued use creates a pool environment in which algae will struggle to thrive

MICRO CLEAN SIZE | 1 QT.

Brilliant sparkling water starts here

FEATURE & BENEFITS

Unique non-metallic, non-staining, and non-foaming clarifying formula

Not affected by shock treatments or high chlorine levels

Compatible with all sanitizing systems, pool surfaces, and filter types

Formulated pH neutral

Surrounds and coagulates microscopic particles as small as 2 microns allowing filter media to quickly remove them from water

Removes a variety of matter through filtration

Reduces sanitizer consumption

APPLICATION


Apply an initial treatment of 14 ounces per 10,000 gallons of pool water directly to the pool with the pump and filter running

Apply a maintenance treatment weekly by adding 4 ounces per 10,000 gallons of pool water

Swimming may resume 15 minutes after applying into the pool

biodegradable

FEATURE & BENEFITS

Prevents unpleasant odors

Fresh lemon scent

Removes grease, oil, and grime

Protects cover from deterioration and sticking together during storage

Prolongs useful life of cover

Suitable for:

• Solar Blankets

• Patio Furniture

• Safety Covers

• Decks

• Anything else around the pool

APPLICATION

Remove major debris and water from pool cover while cover is still on the pool

Remove cover and spread out on a smooth flat surface

Dilute 12 to 16 ounces of product with 2½ gallons of water and spread over entire cover

Brush the cover clean with a nylon brush

Rinse cover and clean other side

Lightly sprinkle solution on cover as it is being folded for storage

Sell the idea to your customers, “One for Clean, and one for storage.”

COVER CLEAN-N-STOW SIZE | 1 QT.

Cleaner and deodorizer for vinyl, solid, and mesh covers

APPLICATION

Apply product when pool is not in use and with pump running

Add 1 ounce for every 2,500 gallons of water. For best distribution apply to a 1 gallon pail of water and broadcast over the pool water’s surface.

Use as part of a weekly maintenance program

During periods of time where pool use is heavy, apply twice weekly

PRE-TREATMENT

For those having difficulties maintaining a sanitizer residual or having other uncommon pool issues, add 24-32 ounces per 10,000 gallons of pool water. This treatment may help to remove unwanted wastes that inhibit other water treatments from working effectively. Circulate pool water for 24 hours before proceeding with next superchlorination or other related treatment.

10

ALL-IN-1 FILTER CLEANER SIZE | 1 QT.

Hard working, deep penetrating cleaner, degreases all filters without harm to the media

FEATURE & BENEFITS

Contains strong cleaning compounds and releasing agents

Complex formula created with wetting agents and surfactants

Effective for use with all filters

Quickly loosens material buildup in filters

Increases filter efficiency

Extends the life of filter media

QUICK CLEAN FOR SAND FILTERS:

With pump running and filter in the backwash position add 6 to 16 ounces of this product into skimmer

Remove basket and other materials from skimmer before adding this product

OPTIONAL SAND FILTER CLEANING:

Add this product directly into the filter media, let soak for 4 hours or longer

After 4 to 8 hours, with the filter valve in the backwash position, start pump

Continue normal filter operation once discharge is clear

CARTRIDGE AND D.E. FILTER CLEANING:

Remove filter media from holding tank and rinse off any excess debris from filter pleats

Spray this product directly on to the filter pleats, start at the top and work down the filter

Allow cleaner to stand a minimum of 5 minutes before rinsing filter

OPTIONAL CARTRIDGE AND D.E. FILTER CLEANING:

In an appropriate sized pail, add 16 ounces of this product to 2½ gallons of fresh water

Allow filter media to soak for 30 minutes, afterwards remove and rinse

Do not soak filters in steel, aluminum, or metal containers

SURFACE CLEAN SIZE | 1 QT.

Thick, concentrated formula will cut through most surface stains

FEATURE & BENEFITS

Cleans stubborn stains and scale

Removes efflorescence from hard surfaces

Thicker than other cleaners, clings to surfaces for easy cleaning

May be used on plastic, vinyl, fiberglass, ceramic, and painted surfaces, and more

AVOID metallic surfaces

Compatible with all sanitizer types

APPLICATION

Apply to a damp sponge or brush and scrub pool surface at water level

Spot test on all surfaces in an inconspicuous area before proceeding

Rinse treated surfaces thoroughly

To remove heavy stains, allow cleaner to soak on stain for 5 to 10 minutes before scrubbing or rinsing

Only use soft bristle brush or sponge on vinyl surfaces

SAND ASSIST SIZE | 6 OZ.

Ideal for sand filters, this product will tighten up the filter media and allow it to pull more particulate from the water.

FEATURE & BENEFITS

Increases filter efficiency by penetrating the sand with a highly effective polymer formula

Restores water quality after heavy bather loads or heavy rains

Use as needed to remedy hazy water or weekly to add sparkle to the water

Very small doses required

Reduces sanitizer consumption

Product attracts all matter as small as 2 microns and captures it in the filter

APPLICATION

Remove skimmer basket and any other material in skimmer prior to addition

Apply to filter via skimmer after backwash cycle

For weekly maintenance slowly add 1 teaspoon into skimmer for every 5,000 gallons of water

Operate filter normally

Re-seal pouch after use. Store in a safe location away from other pool or household products.

11

4-STEP APPLICATION

Not sure if the stain on the pool surface is metallic or organic? Concerns about a long lasting stain or a stain the does not budge with other pool products? These steps were developed to answer these questions and provide a step-by-step solution for removal.

STEP 1 – PREPARE:Take a plastic bottle and fill it with sand or anything that is not buoyant. Replace the cap and attach a sponge with rubber bands to the bottle. The bottle must become submersible.

STEP 2 – TESTING:

With rubber gloves on to protect your hands, saturate the sponge with Caribbean Blue Scale & Metal Solution. Place the bottle with attached sponge and place it directly on the stain under the water. Keep the sponge on the stain for five minutes.

STEP 3 – RESULTS:

After five minutes, if the area near the sponge turns yellow, the stain is likely an organic stain. Organic stains typically can be removed with algae treatment products.

After five minutes, if the area near the sponge returns to the original color, the stain is likely a metallic stain. Proceed to Step 4.

After five minutes, if there is no change in the appearance of the stain where the saturated sponge was placed, the stain may be metallic with multiple layers. Retry Step 2, but instead of five minutes, proceed to let the saturated sponge sit on the stain for fifteen minutes. If there is no success Retry Step 2 for thirty minutes. If the pool or spa finish returns to the original color, refer to Step 4.

STEP 4 – TREATMENT:Raise the pool or spa water above the normal operational level of the pool.

Adjust pH of the pool water to 7.5 or higher. The pH of the pool, after the product application, will decrease slightly. Avoid adjusting pH for 24 hours.

Proceed to add the appropriate amount of Caribbean Blue Scale & Metal Solution based on the results of the test results from Step 3:

• Five Minutes: Add 1 Quart 10,000 gallons of water.

• Fifteen Minutes: Add 1 Quart per 5,000 gallons of water.

• Thirty Minutes: Add 1 Quart per 2,500 gallons of water.

Continue running the pump and filter for three days after applications. Frequently monitor the filter pressure and backwash or clean the filter media as necessary. The water may turn milky indicating the product is working, albeit faster than the filter. Continue filtering until the water clears, Caribbean Blue Sand Assist may help speed up the process.

Caribbean Blue Scale & Metal Solution is not affected by cyanuric acid levels. Scale & Metal Solution is safe to use on all pool or spa surfaces.

When excessive metals are present or Calcium Hardness is elevated, filters should be cleaned with Caribbean Blue Filter Magic.

METALS IN POOLS Metals can be a big headache for anyone operating a swimming pool or spa. The presence of metal in water can lead to water discoloration and staining of surfaces. Unfortunately, the addition of metals to pool water is often unavoidable. Some of the common culprits of metal introduction into pool water are:

• Source water. Especially those using a well water source.

• Water treatment products. Typically specialty algaecides.

• Accidental additions of chemicals used on lawns and landscaping

• Corroding equipment located in or attached to the pool or spa

The ideal color for pool water can be best described as whitish-blue. However, water can change quickly at anytime to red, blue, purple, black, brown or a combination of these colors due to metals in the water. Typically, when the pool water color changes, the clarity of the water does not. Do not let algae, out of balance water, or staining from leaves and other debris let you believe that someone may have a metal issue.

When metals are present in the water, the metal partials are usually completely soluble so most never see the metal present in the water. If metals become visible in the pool as a surface stain or from the water changing color, a variety of changes may have occurred:

• Rapid increase in pH or alkalinity

• Elevated total dissolved solids (TDS)

• Significant amount of cyanuric acid present

• Heavy use of oxidizers (shocks) and chlorine generators

Saves metal problems other products cannot touch.

FEATURES

Crystallizes metals in water allowing filter to remove them from pool water

Removes stains from all pool surfaces

Removes scale

Compatible with all filtration types

May help to decrease elevated levels of calcium hardness

Prevents staining and scaling

Protects plumbing and equipment

Can be used to solve existing water issues or prevent bad water from causing issues

APPLICATION

Clean filter and adjust pH to 7.5 or higher

Best results will occur when water temperature is above 60º and when sanitizer levels are 1ppm or less.

Apply with pump running. Avoid swimming for 8 hours.

TREATMENT:

Temporarily remove metal delivery systems (Nature 2™, Frog) and shut down salt generators. Add 1 quart per 10,000 gallons of water. Run pump continuously for 48 hours.

MAINTENANCE:

Add 3-6 ounces per 10,000 gallons weekly

SCALE & METAL SOLUTION SIZE | 1 QT.

12

STEP 1 Resolve any water problems in the pool, such as algae or cloudy water, before closing the pool.

STEP 2 Adjust the water balance factors to their appropriate ranges:pH 7.2 – 7.6 Total Alkalinity 80 – 120 ppm Calcium Hardness 200 – 400 ppm

STEP 3 Add 2 pounds of Caribbean Blue Quick Shock per 10,000 gallons of water.

STEP 4 Apply an initial dose of Caribbean Blue Microfloc Clarifier or Caribbean Blue Algae Defense 60 to keep pool clear all year.

STEP 5 If the pool is equipped with a sand filter, clean it with Caribbean Blue All-N-1 Filter Cleaner.

STEP 6 If applicable, lower the water level of your pool. See your local dealer.

STEP 7 If the pool is equipped with a cartridge or DE filter, clean the filter pleats or grids with Caribbean Blue All-N-1 Filter Cleaner.

STEP 8 Before placing the winter cover clean the pool surface with Caribbean Blue Surface Clean. Clean where the water line typically is present during the season.

ANYTIME STEPS

At any time during the opening process perform these two tasks: Introduce Caribbean Blue High Tech Tabs or Pure Tabs to your chemical feeder. Anytime is a good time to sanitize the pool water.

Brush, Vacuum, Clean. Do these at any time and your helping keep the pool tidy and making the products you are adding into the pool work better, faster, or both.

STEP 1 If needed, add water to get the pool to operational level. Once enough water has been added start circulating the pool water. Circulate pool water for 24 hours before the first test of the season.

STEP 2 Adjust the water balance factors and make any necessary adjustments to the Caribbean Blue UV Shield levels. Water balance factors are pH, Alkalinity, and Calcium Hardness

STEP 3 Add Caribbean Blue Forever Clear Shock or Caribbean Blue Quick Shock to oxidize the materials growing in the pool during the off-season along with any materials added with the new water introduced.

STEP 4 Apply an initial dose of Caribbean Blue Microfloc Clarifier or Caribbean Blue Algae Defense 60 to keep pool clear all year.

STEP 5 When high levels of metals or calcium are present add Caribbean Blue Scale & Metal Solution to prevent issues from forming.

STEP 6 Add Caribbean Blue Forever Clear Advantage Plus to the pool in at least two separate dosages. This step will make water care a breeze! Skip this step if the pool was closed with the Caribbean Blue Winter Kit.

POOL OPENING POOL CLOSING

SUPER DROP OUT SIZE | 1 QT.

Our fastest acting and most concentrated liquid flocculent for swimming pool water. Water clarifiers added to speed up the time between cloudy and clear.

FEATURES & BENEFITS

Concentrated flocking agent in liquid form

For use on all pool types and surfaces

Compatible with all sanitizers

For use with pools that can move water out of system entirely, typically called “waste”

Continuous suppression for up to 72 hours

Contains no alum

Fast acting

APPLICATION

Shake bottle thoroughly before applying to the pool

Adjust pH to 7.8 or greater

Add 16 ounces per 20,000 gallons of water evenly over the water surface. Add 32oz per 20,000 gallons for severely cloudy pools

Allow the pump to run for approximately one to four hours. Brush pool surfaces for best results. After the allotted amount of time, turn pump off and allow water to remain still.

Once there is separation between clear and cloudy water in the pool, SLOWLY vacuum the separated material directly out of the pool

Pools with extensive algae should have these levels reduced before using Superfloc.

13

SPA SOFT

SYSTEM RENEW

SIZES | 6 OZ. | 2 LB.

SIZE | 1 PT.

Create a more comfortable bathing experience while decreasing maintenance

FEATURE & BENEFITSContains several different types of borate mixtures

Moisturizers added for enhanced bather comfort

Fragranced

Improves water conditions

pH neutral

Does not contain any oils or additives that may clog filter

Reduces eye and skin irritation

Reduces sanitizer consumption, increases sanitizer activity

Improves water clarity

Helps maintain better water balance

Gives water a soft, silky feel

APPLICATION

Balance spa water prior to application

Broadcast over entire spa water surface with pump running

Initial treatment: Add 6 ounces per 200 gallons of spa or hot tub water

For spas that require frequent water additions, add 2 ounce per 200 gallons monthly

Cleans where you cannot see. Helps overall spa water quality.

THE IDEAL CARIBBEAN SPA WATER CARE SYSTEM: START: Add Spa Soft to help maintain water balance and make water softer Use Bromide Builder to initiate the Bromine Tabs Add Bromine Tabs to keep water sanitary Add Oxidizing Shock to shock the spa

CONTINUOUSLY: Add Bromine Tabs to keep water sanitary

WEEKLY: Add Natural Clean to eliminate waterline rings, extend filter life, and keep water crystal clear Add Oxidizing Shock to shock the spa

OFTEN: Check the water balance factors (pH, Alkalinity, Calcium) and make necessary adjustments. Add System Clean prior to emptying and refilling hot tub, normally every 3 months.

Get the complete Caribbean Spa Care Guide by going to www.cbpoolspa.com to learn more.

FEATURE & BENEFITS

No foaming

Restores plumbing in spa to original condition

APPLICATION

Apply only to spas and hot tubs that are currently are heated above 90°F (320°C).

With the spa jets turned off, apply entire contents (16 fluid ounces) of the product directly to the spa.

16 ounces will treat up to 750 gallons.

Turn on the spa jet motor on highest setting for 5 minutes.

For older spas that have never used this product before leave jets on for 10 minutes.

If applicable, as water is circulating turn spa diverters.

Allow spa to operate normally overnight. Do not use spa.

Afterwards turn on the jets on highest setting for 5 minutes.

Drain spa in the same manner you would do so normally. Clean spa surfaces.

Rinse and degrease spa filters using a cleaning agent for spa filters.

Spa may be immediately refilled afterwards; operate spa normally.

biodegradable

14

SPA BROMINE TABSSPA BROMIDE BUILDER

SIZES | 1.5 LB. | 4 LB.

SIZE | 1 PT.

The easiest solution for spa maintenance

BROMINE TABS FEATURE & BENEFITS

1-Bromo-3-chloro-5,5-dimethylhydantoin

pH 4.0

Sanitization efficiency is independent of pH

Applied through tablet floater or brominator

Lower odor than chlorine maintenance

Bromine continuously sanitizes the water regardless of conditions

BROMINE BUILDER FEATURE & BENEFITS

Liquid formulation

Often a onetime application to the spa

Instantly creates a bromide reserve in the water

BROMINE TABS APPLICATION

Fill bromine dispenser with Spa Brominating Tabs and adjust levels

Bromine level should range between 3-5 ppm

Add bromine tablets as needed. Frequency will be determined by bather usage and circulation.

BROMINE BUILDER APPLICATION


Add 2 ounces for every 100 gallons of water on new fills

Introduce Brominating Tabs into the spa

GRANULAR CHLORINE SIZES | 1 LB. | 2 LB. | 4 LB.

A chlorinating concentrate for spas and hot tubs

FEATURE & BENEFITS

99% dichloro-s-triazinetrione

pH 6.0

Quick dissolving and totally soluble

Small doses to sanitize

Larger doses to shock

Easy to use

Near neutral pH

APPLICATION

Balance water and perform any necessary filter maintenance before adding Di-Chlor

Initial treatment & Superchlorination: Add 1 ounce (1 tbs) per 250 gallons of water. Do not enter water until chlorine levels are at 5 ppm or lower.

Maintenance: Add ½ ounce (1 tsp) per 250 gallons of water. Maintain chlorine levels between 1-5 ppm.

Always add product to the spa with the water circulation system operating

BROMINE TABLET: A halogen sanitizer (similar to chlorine) sold in a tablet form. It consists mostly of bromine, but does contain a small amount of chlorine. When applied to the water it slowly dissolves and forms hypobromous acid.

HYPOBROMOUS ACID: The chemical that bromine produces that sanitizes and oxidizes water. In other words, hypobromous acid eliminates assorted microorganisms and other organic and inorganic material from the water.

BROMIDE: The used or spent version of hypobromous acid. Loosely, bromide can sometimes be referred to as combined bromine. Bromides have sanitizing potential, more so than chloramines. The concentration of bromide is sometimes referred to as a bromide bank.

BROMINE TERMINOLOGY

BATHERS: Considering how close in proximity everyone is in a spa, it would be wise to make sure that your sanitizer is always disinfecting the water. Brominating Tabs can continuously sanitize water more effectively compared to chlorine.

TEMPERATURE: The warmer the water, the larger the amount of materials such as skin, cosmetics, and body oils that detach from the body. Additionally, bacteria and other microorganisms grow, multiply, and thrive at increased rates the warmer the water gets. In water, bromine does not dissipate as quickly as chlorine.

BALANCE: Spas and hot tubs have aerators and jet pumps. These devises introduce air into the water. The introduction of air will cause the pH in the water to increase. Even though bromine may eventually contribute to pH issues, its sanitizing and oxidizing potential are not significantly inhibited by the pH of water.

Bromine is the ideal sanitizer for most spas for three reasons: bathers, temperature, and balance.

15

FEATURE & BENEFITS

Potassium Peroxy-Monopersulfate; a non-chlorine oxidizer

pH 2.3

Revitalizes chlorine or bromine sanitizers

Does not contain any chlorine

Quick dissolving treatment for spas and hot tubs

Destroys contaminants, organics, and other material in water

Cannot overdose

Spa may be used 15 minutes after application

APPLICATION

Balance water


With light to moderate use, add 1.5 ounces (2 tbs) for every 200 gallons of spa water weekly or when water begins to look dull

In some tests, false high total chlorine residual may be present for up to 48 hours

CHLORINE FREE SHOCK

COMPLETE OXIDIZING SPA SHOCK

SPA KIT

SIZES | 2.2 LB. | 5 LB.

SIZE | 2.2 LB.

Quickly removes contaminants and other build up in spa water. Restores dull cloudy water back to beautiful.

Chlorine-free oxidizing shock with added clarifiers, buffers and stain preventatives.

FEATURE & BENEFITS

Monopersulfate blended with additives to improve your spa's water

Revitalizes chlorine or bromine sanitizers

Quick dissolving treatment for spas and hot tubs

Destroys contaminants, organics, and other material in water

Cannot overdose

Spa may be used 15 minutes after application

Gently Scented

APPLICATION

Balance water


With light to moderate use, add 1.5 ounces (2 tbs) for every 200 gallons of spa water weekly or when water begins to look dull

In some tests, false high total chlorine residual may be present for up to 48 hours

Seven great products designed to get your spa running at its best. Simply choose your sanitizer, and relaxation awaits.

KIT CONTAINS

16 oz. Alkalinity Increaser

16 oz. pH Increaser

24 oz. pH Decreaser

2 lb. Spa Soft

1 pt. Stain & Scale

1 pt. Enzyme Plus

Water Sample Bottle

Test Strips

Spa Care Guide

16

FEATURES & BENEFITS

Contains: calcium chloride

Prevents corrosion caused by improper water balance

Eliminates etching of plaster surfaces

Promotes better water balance; Compatible with all sanitizers.

Helps maintain Calcium Hardness levels between 150-250 ppm

Makes spa or hot tub water comfortable and enjoyable for users

APPLICATION

Add product into spa or hot tub with circulation system running

To increase calcium hardness 10 ppm, add 1 ounce (2 tbs) per 500 gallons of spa water.

SPA CALCIUM INCREASER

FEATURES & BENEFITS

Contains: sodium hydrogen carbonate

Powdered product

Prevents corrosion in equipment and on spa surfaces

Helps control pH

When alkalinity is low, helps maintain alkalinity in proper range of 100-120 ppm

Enhances swimmer comfort

APPLICATION


Use ½ ounce (1 tbs) per 200 gallons of spa water to increase total alkalinity by 10 ppm

SPA ALKALINITY INCREASERSIZES | 1 LB. | 2 LB.SIZE | 1 LB.

FEATURES & BENEFITS

Contains: sodium carbonate

Granular product

Instantly raises pH in spa or hot tub

Allows immediate use after treatment

Compatible with ALL forms of sanitization

Provides comfort to users

Protects equipment

APPLICATION


If pH of water is between 6.8-7.2, add 1 ounce (2 tbs) for every 500 gallons of water

If the pH is below 6.8, Add 2 ounces (4 tbs) for every 500 gallons of water

Retest pH after 30 minutes, reapply if needed

SPA pH INCREASERSIZE | 1 LB.

FEATURES & BENEFITS

Contains: sodium bisulfate

Granular product

Lowers pH in spa and hot tub water

Balances water for bather comfort

Increases equipment life

Helps protect equipment from damage caused by scale

Can help to prevent cloudy water and poor smells

Safer than muriatic acid

APPLICATION


If pH is between 7.7-8.0, add 4 ounce (2 tsp) for every 500 gallons of water

If pH is above 8.0 then add 5 ounce (4 tsp) for every 500 gallons of water

Retest pH after 30 minutes, reapply if needed

SPA PH DECREASERSIZE | 1.5 LB.

Chlorine 1-3 ppmBromine 3-5 ppmpH 7.2 – 7.6

Total Alkalinity 100 – 120 ppmCalcium Hardness 150 – 250 ppmMetals 0 ppm

IDEAL LEVELS FOR SPASWATER BALANCE SUMMERY

17

SPA STAIN & SCALE SIZES | 1 PT. | 1 QT.

Concentrated formula developed to quickly remove metals from spa and hot tub water

FEATURE & BENEFITS

Unique formula that actually removes metals from spa or hot tub water through the filter

Removes iron, copper, silver and manganese

Prevents scale buildup especially around jets and inside equipment

Removes metallic stains and erodes some existing scale

Protects plumbing and equipment

APPLICATION

Maintain pH between 7.4-7.6

For the removal of fresh stains and scale add 2 to 3 ounces to every 100 gallons of water

For continued prevention of staining and to control scale add 1 ounce to every 100 gallons of water weekly

After application, water may haze if elevated hardness levels are present. Normal circulation and a clean filter will eliminate cloudiness shortly after applying. Spa Clarifier may help water clear quicker

SPA CLARIFIER

SPA FOAM FREE

SIZE | 1 PT.

SIZE | 1 PT.

Highly concentrated clarifier for exceptionally clean, clear water. Used to help make good looking water great. Can also be used to fix not so great water.

Concentrated foam eliminator immediately removes foam from water

FEATURES & BENEFITS

Quickly removes suspended particles

Works with filter to enhances water clarity

Does not affect water balance

Provides clear and clean water

Easy and safe to use

APPLICATION


When used as part of a maintenance program, add 2 ounces per 500 gallons weekly.

To aid in clearing hazy or cloudy water, add to the water 4 ounces per 500 gallons

FEATURES & BENEFITS

Removes and stops foam in spas, hot tubs and fountains

Compatible with ALL forms of sanitization

Prevents foam from starting and accumulating

Will not clog filters

Biodegradable ingredients

APPLICATION

Add 1 ounce near foaming areas to disperse foam with pump running

Use as needed

18

SPA FILTER CLEANER SIZE | 1 PT.

A spa filter removes a lot of stuff from your spa, most of which you cannot see. Caribbean Spa Filter Cleaner helps remove all the things that a spa filter grabs, such as body oil, dead skin, dirt, and grease. Regular cleaning of your filter will keep your water beautiful.

FEATURE & BENEFITS

Cleans oil and grease from filters of all types

Increases the life of the spa filter

Improves the filters performance

Improves circulation

Compatible with all sanitizing systems

Reduces maintenance costs

APPLICATION

Use Filter Clean to soak your filters clean or spray and rinse

Method 1) Mix 8-16 ounces to 2.5 gallons of water and submerge the filter. Soak filter for 30 minutes or longer, remove and rinse

Method 2) Spray Filter Cleaner into the pleats of the filter Allow cleaner to stand for 15 minutes and rinse

Typically Filter Clean should be used monthly. Sanitizing system, frequency of spa use, filter size, and other factors may require more or less frequent use

SPA ENZYME PLUS

SPA SURFACE CLEANER

SIZE | 1 PT.

SIZE | 1 PT.

Spa Natural Clean is an all natural biodegradable product that will aid in the digestion of all sorts of material that accumulates and lingers in spa water.

Scale? Metal stains? No problem. Oily or greasy deposits? No problem. Surface Clean is a simple to use cleaner that can tackle it all.

FEATURES & BENEFITS

All natural and biodegradable

Helps to break down oils and other organics

Unique enzyme formula works better in hot water

Eliminates and prevents waterline and scum rings

Reduces the amount of required filter maintenance

Naturally enhances the clarity of spa water

Increases the sanitizer efficiency

Keeps plumbing clean. No need to purge lines between drain and refill

Non foaming

APPLICATION

Apply while the spa is circulating at its lowest setting

Add 1 ounce per 500 gallons weekly

Avoid superchlorinating water for 24 hours after application to ensure maximum effectiveness

FEATURES & BENEFITS

Safe for use if the spa is full or empty

Application will not affect water balance

Safe for use on all surfaces

Easily removes unsightly issues from spa surfaces

Beat up the build-up you cannot see around the spa periodically between drain and refills

APPLICATION

Apply full strength to surfaces, sponge, or other non-abrasive cleaning pad

Wipe or rinse surfaces clean

biodegradable

19

Customer Service 800-333-0400 Customer Service Fax 616-361-7801421 Ann St N.W., Grand Rapids, MI 49504-2075

cbpoolspa.com CB06-0416

POOL PRODUCTS Chlorine Bromine Biguanide Ozone & UV Salt Generator Ionizer Mineral

CartridgesBromine Tabs NO YES NO YES NO NO NO

Forever Clear Tabs YES NO NO YES YES YES YES

1" Chlor-Guard Tabs YES NO NO YES YES YES YES

3" Chlor-Guard Tabs YES NO NO YES YES YES YES

Chlor-Guard Sticks YES NO NO YES YES YES YES

Chlor-Guard Granulars YES YES NO YES YES YES YES

Tidal Wave 73 YES YES NO YES YES YES YES

Forever Clear Shock YES YES NO YES YES YES YES

Quick Shock YES YES NO YES YES YES YES

Microfloc Shock YES YES NO YES YES YES YES

Simply Shock & Swim Plus YES YES NO YES YES YES YES

Complete Shock YES YES NO YES YES YES YES

Aqua Prep 10 YES YES YES YES YES YES YES




Forever Clean YES YES YES YES YES YES YES

Micro Clean YES YES YES YES YES YES YES

Forever Clear Advantage YES YES YES YES YES YES YES

SunBlock YES YES NO YES YES YES YES

All-In-1 Filter Cleaner YES YES YES YES YES YES YES

Cover Clean-N-Stow YES YES YES YES YES YES YES

Mustard Out YES YES NO YES YES YES YES

Kill & Clear YES YES NO YES NO YES NO

Algae Defense 60 YES YES * YES YES YES YES

Forever Clear Algaecide YES YES YES YES YES YES YES

Knock Out YES YES NO YES NO YES NO

Super Drop Out YES YES YES YES YES YES YES

Sand Filter Aid YES YES YES YES YES YES YES

Scale & Metal Solution YES YES YES YES ** ** **

Phos Out YES YES YES YES YES YES YES

SPA PRODUCTS Chlorine Bromine Biguanide Ozone & UV Salt Generator Ionizer Mineral

CartridgesBromine Tabs NO YES NO YES YES YES NO

Bromide Builder YES YES NO YES YES YES YES

Granular Chlorine YES YES NO YES YES YES YES

Chlorine Free Shock YES YES NO YES YES YES YES

Complete Shock YES YES NO YES YES YES YES

pH Decreaser YES YES YES YES YES YES YES

pH Increaser YES YES YES YES YES YES YES

Alkalinity Increaser YES YES YES YES YES YES YES

Calcium Increaser YES YES YES YES YES YES YES

Filter Cleaner YES YES YES YES YES YES YES

Enzyme Plus YES YES YES YES YES YES YES

Surface Cleaner YES YES YES YES YES YES YES

Stain & Scale YES YES YES YES ** ** **

Foam Free YES YES YES YES YES YES YES

Spa Soft YES YES YES YES YES YES YES

Clarifier YES YES YES YES YES YES YES

System Renew YES YES YES YES YES YES YES

PRODUCT COMPATIBILITY CHART

* Products will work well in biguinide system, however the products may cause false high biguinide sanitizer readings ** Turn off these devices before using Scale & Metal Solution and Stain & Scale.

FEATURES & BENEFITS Product Guide Final.pdf · FEATURES & BENEFITS 98% Bromochloro dimethyhydantoin...

Documents

Transcript of FEATURES & BENEFITS Product Guide Final.pdf · FEATURES & BENEFITS 98% Bromochloro dimethyhydantoin...