Features and benefits - Komachine
Transcript of Features and benefits - Komachine
Parallel slide gate valve are ideal for high temperature and pressure line to prevent thermal binding.
Features and benefits
SPRING
BLEED HOLE
FLOW
Parallel slide construction can be furnished for high differential pressure services or where thermal expansion may cause sticking of a wedge type.
The parallel slide gate assembly consists of two interchangeable spring loaded discs, a fully guided disc holder, and retaining pins.
Springs are fitted between discs to provide initial sealing force only, and do not maintain the sealing force.
Discs are interchangeable which simplifies in-line maintenance and eliminates the need to custom fit the seats to the discs.
Position seating eliminates stress and potential binding due to thermal expansion of the stem.
No additional torque required to achieve a positive seal once disc are in position.
Lower seating torque to reduce actuator size and cost
Hardfaced seating surfaces provide high cycle capability in very high differential pressure services
By-pass valve are used to reduce the traversing differential pressure across the valve seat.It reduces the size of the operating gear and also provide a convenient means for the initial warming through of pipe lines
Equalizing devices are used to relieve the fluid trapped between the seat forces, and to provide an outlet for the fluid displaced by the valve stem traversing to the shut position.
PARALLEL SLIDE GATE VALVE
PK_46PK_58
øD1
L(RF), L1(BW)
H 1
HW (HAND WHEEL OPERATED)
H (O
PEN
)øD
NO. PART NAME MATERIAL123456789
101112131415161718192021222324252627282930
A216 - WCBA216 - WCBA216 - WCB+STLA479 - 410A53A576 - 1020+STLA479 - 410
A105A193 - B7A194 - 2HA576 - 1020+CrA193 - B7A194 - 2HA216 - WCBA479 - 410A283 - DA576 - 1020A194 - 2HA283 - DINCONEL X - 750A576 - 1020A576 - 1020+ZnDUCTILEA53A576 - 1020A439 - D2CA47 - 32510+ZnSTEEL
A217 - WC6A217 - WC6A217 - WC6+STLA479 - 410A53A182 - F11+STLA479 - 410
A105A193 - B7A194 - 2HA479 - 410A193 - B16A194 - 4A217 - WC6A479 - 410A283 - DA576 - 1020A194 - 2HA283 - DINCONEL X - 750A576 - 1020A576 - 1045+ZnDUCTILEA53A576 - 1020A439 - D2CA47 - 32510+ZnSTEEL
A217 - C12AA217 - C12AA217 - C12A+STLA479 - 410A53A182 - F91+STLA479 - 410
A105A193 - B7A194 - 2HA479 - 410A193 - B16A194 - 4A217 - C12AA479 - 410A283 - DA576 - 1020A194 - 2HA283 - DINCONEL X - 750A576 - 1020A576 - 1045+ZnDUCTILEA53A576 - 1020A439 - D2CA47 - 32510+ZnSTEEL
BODYBONNET DISCSTEMHAND WHEELBODY SEAT RINGBACK SEAT RINGGASKETPACKINGGLAND FLANGEGLAND BOLTGLAND NUTPACKING GLANDBONNET BOLTBONNET NUTDISC GUIDEPACKING BUSHYOKEYOKE BARYOKE NUTSTOPPERCOIL SPRINGSTOP BARSPRING WASHERGEAR BOXSTEM PROTECTORYOKE CAPYOKE SLEEVEHINGE NUTNIPPLE
GRAPHITE+GRAPHITE WITH INCONEL WIRESPIRAL WOUND / GRAPHITE+304+304
STANDARD MATERIAL SPECIFICATIONS
BOLTED BONNET TYPE
PK_48
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
END CONNECTION
PK_60
DIMENSION AND WEIGHTCLASS 150 UNIT : mm
SIZEL
L1D
D1H
H1WEIGHT(Kg)
2177.8215.9200
-490
-16
3203.2282.4224
-590
-29
4228.6304.8250
-740
-43
6266.7403.4315
-1001
-72
8292.1419.1355
-1252
-116
10330.2457.2400
-1410
-173
12355.6501.7450
-1605
-263
CLASS 300 UNIT : mm
SIZEL
L1D
D1H
H1WEIGHT(Kg)
2215.9215.9200
-460
-22
3282.4282.4224
-565
-41
4304.8304.8250
-674
-59
6403.4403.4355
-958
-119
8419.1419.1400
-1146
-193
10457.2457.2450
-1406
-291
14762.0762.0
-500
-2071687
16838.2838.2
-500
-2203876
18914.4914.4
-630
-25301201
241143.01143.0
-710
-32202258
CLASS 600 UNIT : mm
SIZEL
L1D
D1H
H1WEIGHT(Kg)
2292.1292.1200
-549
-35
3355.6355.6250
-650
-64
4431.8431.8355
-773
-110
6558.8558.8450
-1130
-222
8660.4660.4500
-1258
-405
10787.4787.4630500
15761727626
12838.2838.2
-630
-1921878
16990.6990.6
-710
-24551490
14889.0889.0
-630
-22191165
181092.21092.2
-710
-25781836
201193.81193.8
-800
-28552410
PK_49PK_61
øD1
L(RF), L1(BW)
H 1
HW (HAND WHEEL OPERATED)
H (O
PEN
)
øD
NO. PART NAME MATERIAL123456789
101112131415161718192021232425262728293031323334
A216 - WCBA216 - WCBA216 - WCB+STLA479 - 410A53A576 - 1020+STLA216 - WCBGRAPHITE
A283 - DA193 - B7A194 - 2HA283 - DA576 - 1020+CrA193 - B7A194 - 2HDUCTILE IRONA193 - B7A576 - 1045+ZnA576 - 1020A194 - 2HA576 - 1045+CrA576 - 1045+CrA216 - WCBINCONEL X - 750A283 - DA576 - 1045A576 - 1020A53A576 - 1020A439 - D2CA47 - 32510+ZnSTEEL
A217 - WC6A217 - WC6A217 - WC6+STLA479 - 410A53A182 - F11+STLA217 - WC6+STLGRAPHITE
A283 - DA193 - B7A194 - 2HA283 - DA479 - 410A193 - B16A194 - 4DUCTILE IRONA193 - B7A576 - 1045+ZnA576 - 1020A194 - 2HA240 - 304A240 - 304A217 - WC6INCONEL X - 750A283 - DA576 - 1045A576 - 1020A53A576 - 1020A439 - D2CA47 - 32510+ZnSTEEL
A217 - C12AA217 - C12AA217 - C12A+STLA479 - 410A53A182 - F91+STLA217 - C12A+STLGRAPHITE
A283 - DA193 - B7A194 - 2HA283 - DA479 - 410A193 - B16A194 - 4DUCTILE IRONA193 - B7A576 - 1045+ZnA576 - 1020A194 - 2HA240 - 304A240 - 304A217 - C12AINCONEL X - 750A283 - DA576 - 1045A576 - 1020A53A576 - 1020A439 - D2CA47 - 32510+ZnSTEEL
BODYBONNET DISCSTEMHAND WHEELBODY SEAT RINGBACK SEAT RINGGASKETPACKINGGLAND FLANGEGLAND BOLTGLAND NUTYOKEPACKING GLANDBONNET BOLTBONNET NUTGEAR BOXBOLTSPRING WASHERYOKE BARYOKE NUTRETAINERADAPTER RINGDISC GUIDEDISC SPRINGSTOPPERBONNET CLAMPSTOP BARSTEM COVERYOKE CAPYOKE SLEEVEHINGE NUTNIPPLE
GRAPHITE+GRAPHITE WITH INCONEL WIRE
STANDARD MATERIAL SPECIFICATIONS
PRESSURE SEAL BONNET TYPE
PK_50
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
END CONNECTION
PK_62
DIMENSION AND WEIGHTCLASS 600 UNIT : mm
SIZEL
L1D
D1H
H1WEIGHT(Kg)
2292.1177.8200
-586
-29
3355.6254.0250
-705
-52
4431.8304.8355
-872
-121
6558.8457.2450355
10891300189
8660.4584.2500500
12741490339
10787.4711.2630500
15201720497
30-
1651.0-
710-
40107033
CLASS 900 UNIT : mm
SIZEL
L1D
D1H
H1WEIGHT(Kg)
2368.3215.9315
-658
-33
3381.0304.8355
-773
-59
4457.2355.6355
-896
-110
6609.6508.0
-500
-1287227
8736.6660.4
-500
-1495349
161130.31092.2
-500
-25421638
241549.41549.4
-710
-36464338
CLASS 1500 UNIT : mm
SIZEL
L1D
D1H
H1WEIGHT(Kg)
2368.3215.9315
-658
-40
3469.9304.8355
-832
-66
4546.1406.4400
-963
-121
6704.9558.8630500
11781316312
8831.9711.2
-630
-1497458
10990.5863.6
-710
-18431121
121130.3990.6
-710
-21051344
141257.31066.8
-800
-23071658
161384.31193.8
-900
-26552064
181536.71346.2
-710
-29262883
26-
1473.2-
800-
35157015
201663.71473.2
-710
-30415678
CLASS 2500 UNIT : mm
SIZEL
L1D
D1H
H1WEIGHT(Kg)
3577.9368.3355
-750
-75
6914.4609.6630
-1010
-379
PK_51PK_63