Omni-Bus Lighting Solutions

Control CFL, LED, Incandescent, Electronic Low Voltage, Halogen, Pumps, Shades, and More.

leviton.com/omni-bus

Save wiring and installation time with the flexible modular solution

Leviton’s Omni-Bus controls lights, shades, fans, shutters, pumps, and more. Utilizing the worldwide DIN rail standard for mounting, this bus and controller based management family controls CFL, LED, electronic low voltage, Halogen, and incandescent lighting. Each hard-wired or wireless device works in 110-120VAC/220-240VAC 50-60Hz markets unless otherwise noted. Modular Omni-Bus components can be located where needed to save wiring and installation costs.

Why is Omni-Bus Better? Elegant, multi-button programmable wall switches eliminate the expense of in-wall high voltage wiring to multi-way switches. Whereas competing central lighting systems require home runs to a single central cabinet, Omni-Bus power wiring is minimized as controllers can be localized to switches and switches can be programmed to perform a number of actions.

How Does Omni-Bus Work? All modules in an Omni-Bus system are connected together using a low voltage Cat5 UTP bus. Buttons on wired or wireless wall stations can be configured to operate any Omni-Bus load or scene.

Flexible Architecture Omni-Bus architecture includes low cost splitters and T-connections for ease of installation and expandability. The network can be star, hub and spoke, daisy chain or a combination. Splitters allow for a free topology architecture. Versatility that’s perfect for small businesses, featuring the benefits of central lighting control with the flexibility of distributed control systems.

leviton.com/omni-bus

Features and Benefitsn Control lighting (CFL, LED, incandescent, halogen, electronic low voltage), shades, fans, shutters, pumps,

and more

n Easy to install! Modular components use Cat 5/Cat 6 and can be located where needed to save installation time and costs

n Competing systems require home runs to a single central cabinet

n Eco-Friendly, uses less resources like copper

n Flexible open architecture works with any momentary switch interface with low voltage LED’s

n Elegant, multi-button programmable wall switches eliminate the expense of in-wall high voltage wiring to multi-way switches

n Use Omni-Bus stand-alone or integrate with Leviton automation system for apps/touchscreens and advanced programming.

leviton.com/omni-bus

leviton.com/omni-bus

Omni-Bus features free setup software available online. Appropriate modules are CE, C-Tick, SASO, FCC, RETILAP, NOM, and UL (ETL) approved.

Use Any Momentary Contact Switch The Omni-Bus network allows for utilization of Leviton wired and wireless wall stations as well as many third party momentary contact switches. Simply connect the Universal Switch Interface Module (part number 114A00-1) to connect up to six third-party switches. Six LED outputs control two-lead bi-color or single color LED indicators for each switch.

DIN Rail Modules Explained Omni-Bus Lighting Control Modules can control lights, shades, fans, shutters, pumps, and more. Diagnostic LED’s on the devices help with installation of nodes on the network. Standard UTP data cable is used between the devices and features up to 1000m Omni-Bus cable length.

Omni-Bus components assure properly terminated data cable for high speed data bus – no jumpers to set. The Omni-Bus network is powered by a low supply voltage (24VDC) power supply. Each module is optically isolated from the mains supply side, making modules safer for users and installers. Leviton’s modules are resistant to electrical surges and lightning.

Connect to Automation Systems For remote access, scheduling abilities, and complete automation, consider Leviton’s Omni security & automation systems for total control over a home or building.

Cat. No. Description

110A00-1 Dimmer DIN Rail Module

110A00-2 Universal Dimmer DIN Rail Module

111A00-1 Power Switch DIN Rail Module

112A00-1 Relay DIN Rail Module

113A00-1 1-Button, Hardwired Switch

113A00-2 1-Button, Wireless Switch

113A00-3 2-Button, Hardwired Switch

113A00-4 2-Button, Wireless Switch

113A00-5 3-Button, Hardwired Switch

113A00-6 3-Button, Hardwired, Brushed Stainless Switch

113A00-7 3-Button, Wireless Switch

113A00-8 6-Button, Hardwired Switch

113A00-9 6-Button, Hardwired, Brushed Stainless Switch

114A00-1 6-Channel Universal Switch Interface Module

114A01-1 Cable Assemblies (12)

115A00-1 RF Transceiver DIN Rail Module

116A00-1 USB Programming Interface Unit

117A00-1 Interface Translator DIN Rail Module

118A00-1 DALI Gateway DIN Rail Module

Cat. No. Description

119A00-1 3-Way Splitter

120A00-1 8-Way Splitter DIN Rail Module

121A00-1 Jumper Plugs

122A00-1 Termination Plug

123A00-1 Power Supply 2.5A DIN Rail Module

124A00-1 Power Supply Interface 2A DIN Rail Module

125A00-1 Keyfob Remote Control, 6-Channel

125A00-2 Keyfob Remote Control, 16-Channel

126A00-1 Scene Control DIN Rail Module

95A20-1 Single-Gang Switch Box w/Cover, Metal

RDGSW-1DW NEMA Omni-Bus 1-button wall station

RDGSW-2DI NEMA Omni-Bus 2-button wall station

RDGSW-4DW NEMA Omni-Bus 4-button wall station

Ordering Information

Leviton Manufacturing Co., Inc. 201 North Service Road, Melville, NY 11747-3138 Telephone: 1-800-323-8920 • Fax: 1-800-832-9538 • Tech Line: (8:30AM-7:00PM E.T. Monday-Friday): 1-800-824-3005

Leviton Security & Automation 4330 Michoud Blvd., New Orleans, Louisiana, 70129 • Telephone: 1-504-736-9810 • Fax: 1-504-253-2954

Visit our website at www.leviton.com/omni-bus © 2015 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice. SA-10006