Features 106H Hot Water Dispenser Faucet 106H Hot Water ......Hot Water Dispenser Faucet shall have...
2
EAST LINEAR Hot Water Dispenser Faucet Other Specified Model Model Description Colors | Finishes 106H Hot Water Dispenser Faucet 5-036 Colors / Finishes 106H 15S 10B 26 15 Page 1 of 2 Spec_106H_d_6/15 Colors / Finishes • 10B: Oil Rubbed Bronze • 15: Polished Nickel • 15S: Satin Nickel • 26: Polished Chrome • Other: Refer to the Newport Brass catalog for additional color/finish options. t: 949.417.5207 l www.newportbrass.com ©2015 Brasstech, Inc. Product Specification: Add "Color / Finish" suffix to Model number, below. Features • Solid brass construction • Quarter-turn washerless ceramic disc valve cartridges • Spout assembly with integral supply hoses • Spring-loaded, normally closed lever handle • 6-1/4” (15.9 cm) spout height at outlet • 4” (10.2 cm) spout reach (c-c) • 1 gallon (3.6 liters) per minute maximum flow rate* • For single hole configurations Codes / Standards Compliance Meets or exceeds the following at date of manufacture: • ASME A112.18.1/CSA B125.1 • IAPMO/cUPC • IPC • NSF 61 • Energy Policy Act of 1992 • All applicable US Federal and State material regulations *A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system. Point-of-Use Water Heater (115V, 140° to 190° range) The Hot Water Dispenser Faucet shall be made of solid brass construction. Faucet shall incorporate a spout assembly with integral supply hoses and feature a quarter-turn washerless ceramic disc valve cartridge. Hot Water Dispenser Faucet shall have a 1 gallon (3.6 liters) per minute maximum flow rate and accommodate single hole configurations. Product shall incorporate a 6-1/4” (15.9 cm) spout height at outlet and a 4” (10.2 cm) spout reach (c-c). Hot Water Dispenser Faucet shall be Newport Brass Model 106H/____ . [Point-of-Use Water Heater shall be Newport Brass Model 5-036].
Transcript of Features 106H Hot Water Dispenser Faucet 106H Hot Water ......Hot Water Dispenser Faucet shall have...
page 1 of 2 spec_
Product Specification: Add "Color / Finish" suffix to Model number, below.
Colors / Finishes• 10B: Oil Rubbed Bronze• 15: Polished Nickel• 15S: Satin Nickel• 26: Polished Chrome
• Other: Refer to the Newport Brass catalog for additional color/finish options.
106H
Features Solid brass construction
Quarter-turn washerless ceramic disc valve cartridge
ADA compliant contemporary hot lever handle
Spout assembly with integral supply hoses
Spring-loaded, normally closed lever handle
6-1/4" (15.9 cm) spout height at outlet
4" (10.2 cm) spout reach (c-c)
1.5 gallons (5.7 liters) per minute maximum flow rate
For single hole configurations
Codes / Standards ComplianceMeets or exceeds the following at date of manufacture:
ASME A112.18.1/CSA B125.1
IAPMO/cUPC
IPC
NSF 61
ADA
Energy Policy Act of 1992
All applicable US Federal and State material regulations
Specified Model
Model Description Colors / Finishes106H Hot Water Dispenser Faucet 15 15S 26 10B Other
5-036 Point-of-Use Water Heater (115V, 140¡F to 190¡ range)
©2012 Brasstech, Inc.
t: 949.417.5207 | www.newportbrass.com
106H
EAST LINEARHot Water Dispenser Faucet
The Hot Water Dispenser Faucet shall be made of solid brass construction. Faucet shall incorporate a spout assembly with integral supply hoses and feature a quarter-turn washerless ceramic disc valve cartridge. Faucet shall incorporate anADA compliant contemporary hot lever handle. Hot Water Dispenser Faucet shall have a 1.5 gallons (5.7 liters) per minute maximum flow rate and accommodate single hole configurations. Product shall incorporate a 6-1/4" (15.9 cm) spout height at outlet and a 4" (10.2 cm) spout reach (c-c). Hot Water Dispenser Faucet shall be Newport Brass Model 106H/____ . [Point-of-Use Water Heater shall be Newport Brass Model 5-036].
EAST LINEAR
Codes / Standards ComplianceMeets or exceeds the following at date of manufacture:
• ASME A112.18.1/CSA B125.1
• IAPMO/cUPC
• IPC
• NSF 61
• Energy Policy Act of 1992
• All applicable US Federal and State material regulations
Hot Water Dispenser FaucetFeatures• Solid brass construction
• Quarter-turn washerless ceramic disc valve cartridge
• Spout assembly with integral supply hoses
• Spring-loaded, normally closed lever handle
• 6-1/4" (15.9 cm) spout height at outlet
• 4" (10.2 cm) spout reach (c-c)
• 1.5 gallons (5.7 liters) per minute maximum flow rate
• For single hole configurations
Page 1 of 2 Spec_106H_rev-b 08.13 t: 949.417.5207 l www.newportbrass.com ©2013 Brasstech, Inc.
Product Specification: Add "Color / Finish" suffix to Model number, below.
The Hot Water Dispenser Faucet shall be made of solid brass construction. Faucet shall incorporate a spout assembly with integral supplyhoses and feature a quarter-turn washerless ceramic disc valve cartridge. Hot Water Dispenser Faucet shall have a 1.5 gallons (5.7 liters) per minute maximum flow rate and accommodate single hole configurations. Product shall incorporate a 6-1/4" (15.9 cm) spout height at outlet and a 4" (10.2 cm) spout reach (c-c). Hot Water Dispenser Faucet shall be Newport Brass Model 106H/____ . [Point-of-Use Water Heater shall be Newport Brass Model 5-036].
15S10B 26 Other15
Specified ModelModel Description Colors | Finishes106H Hot Water Dispenser Faucet
5-036 Point-of-Use Water Heater (115V, 140¡F to 190¡ range)
Colors / Finishes
Colors / Finishes• 10B: Oil Rubbed Bronze• 15: Polished Nickel• 15S: Satin Nickel• 26: Polished Chrome
• Other: Refer to the Newport Brass catalog for additional color/finish options.
106H
15S10B 2615
Page 1 of 2 Spec_106H_d_6/15
Colors / Finishes• 10B: Oil Rubbed Bronze• 15: Polished Nickel• 15S: Satin Nickel• 26: Polished Chrome
• Other: Refer to the Newport Brass catalog for additional color/finish options.
t: 949.417.5207 l www.newportbrass.com ©2015 Brasstech, Inc.
page 1 of 2 spec_
Product Specification: Add "Color / Finish" suffix to Model number, below.
Colors / Finishes• 10B: Oil Rubbed Bronze• 15: Polished Nickel• 15S: Satin Nickel• 26: Polished Chrome
• Other: Refer to the Newport Brass catalog for additional color/finish options.
106H
Features Solid brass construction
Quarter-turn washerless ceramic disc valve cartridge
ADA compliant contemporary hot lever handle
Spout assembly with integral supply hoses
Spring-loaded, normally closed lever handle
6-1/4" (15.9 cm) spout height at outlet
4" (10.2 cm) spout reach (c-c)
1.5 gallons (5.7 liters) per minute maximum flow rate
For single hole configurations
Codes / Standards ComplianceMeets or exceeds the following at date of manufacture:
ASME A112.18.1/CSA B125.1
IAPMO/cUPC
IPC
NSF 61
ADA
Energy Policy Act of 1992
All applicable US Federal and State material regulations
Specified Model
Model Description Colors / Finishes106H Hot Water Dispenser Faucet 15 15S 26 10B Other
5-036 Point-of-Use Water Heater (115V, 140¡F to 190¡ range)
©2012 Brasstech, Inc.
t: 949.417.5207 | www.newportbrass.com
106H
EAST LINEARHot Water Dispenser Faucet
The Hot Water Dispenser Faucet shall be made of solid brass construction. Faucet shall incorporate a spout assembly with integral supply hoses and feature a quarter-turn washerless ceramic disc valve cartridge. Faucet shall incorporate anADA compliant contemporary hot lever handle. Hot Water Dispenser Faucet shall have a 1.5 gallons (5.7 liters) per minute maximum flow rate and accommodate single hole configurations. Product shall incorporate a 6-1/4" (15.9 cm) spout height at outlet and a 4" (10.2 cm) spout reach (c-c). Hot Water Dispenser Faucet shall be Newport Brass Model 106H/____ . [Point-of-Use Water Heater shall be Newport Brass Model 5-036].
EAST LINEAR
Codes / Standards ComplianceMeets or exceeds the following at date of manufacture:
• ASME A112.18.1/CSA B125.1
• IAPMO/cUPC
• IPC
• NSF 61
• Energy Policy Act of 1992
• All applicable US Federal and State material regulations
Hot Water Dispenser FaucetFeatures• Solid brass construction
• Quarter-turn washerless ceramic disc valve cartridge
• Spout assembly with integral supply hoses
• Spring-loaded, normally closed lever handle
• 6-1/4" (15.9 cm) spout height at outlet
• 4" (10.2 cm) spout reach (c-c)
• 1.5 gallons (5.7 liters) per minute maximum flow rate
• For single hole configurations
Page 1 of 2 Spec_106H_rev-b 08.13 t: 949.417.5207 l www.newportbrass.com ©2013 Brasstech, Inc.
Product Specification: Add "Color / Finish" suffix to Model number, below.
The Hot Water Dispenser Faucet shall be made of solid brass construction. Faucet shall incorporate a spout assembly with integral supplyhoses and feature a quarter-turn washerless ceramic disc valve cartridge. Hot Water Dispenser Faucet shall have a 1.5 gallons (5.7 liters) per minute maximum flow rate and accommodate single hole configurations. Product shall incorporate a 6-1/4" (15.9 cm) spout height at outlet and a 4" (10.2 cm) spout reach (c-c). Hot Water Dispenser Faucet shall be Newport Brass Model 106H/____ . [Point-of-Use Water Heater shall be Newport Brass Model 5-036].
15S10B 26 Other15
Specified ModelModel Description Colors | Finishes106H Hot Water Dispenser Faucet
5-036 Point-of-Use Water Heater (115V, 140¡F to 190¡ range)
Colors / Finishes
Colors / Finishes• 10B: Oil Rubbed Bronze• 15: Polished Nickel• 15S: Satin Nickel• 26: Polished Chrome
• Other: Refer to the Newport Brass catalog for additional color/finish options.
106HFeatures• Solid brass construction
• Quarter-turn washerless ceramic disc valve cartridges
• Spout assembly with integral supply hoses
• Spring-loaded, normally closed lever handle
• 6-1/4” (15.9 cm) spout height at outlet
• 4” (10.2 cm) spout reach (c-c)
• 1 gallon (3.6 liters) per minute maximum flow rate*
• For single hole configurations
page 1 of 2 spec_
Product Specification: Add "Color / Finish" suffix to Model number, below.
Colors / Finishes• 10B: Oil Rubbed Bronze• 15: Polished Nickel• 15S: Satin Nickel• 26: Polished Chrome
• Other: Refer to the Newport Brass catalog for additional color/finish options.
106H
Features Solid brass construction
Quarter-turn washerless ceramic disc valve cartridge
ADA compliant contemporary hot lever handle
Spout assembly with integral supply hoses
Spring-loaded, normally closed lever handle
6-1/4" (15.9 cm) spout height at outlet
4" (10.2 cm) spout reach (c-c)
1.5 gallons (5.7 liters) per minute maximum flow rate
For single hole configurations
Codes / Standards ComplianceMeets or exceeds the following at date of manufacture:
ASME A112.18.1/CSA B125.1
IAPMO/cUPC
IPC
NSF 61
ADA
Energy Policy Act of 1992
All applicable US Federal and State material regulations
Specified Model
Model Description Colors / Finishes106H Hot Water Dispenser Faucet 15 15S 26 10B Other
5-036 Point-of-Use Water Heater (115V, 140¡F to 190¡ range)
©2012 Brasstech, Inc.
t: 949.417.5207 | www.newportbrass.com
106H
EAST LINEARHot Water Dispenser Faucet
The Hot Water Dispenser Faucet shall be made of solid brass construction. Faucet shall incorporate a spout assembly with integral supply hoses and feature a quarter-turn washerless ceramic disc valve cartridge. Faucet shall incorporate anADA compliant contemporary hot lever handle. Hot Water Dispenser Faucet shall have a 1.5 gallons (5.7 liters) per minute maximum flow rate and accommodate single hole configurations. Product shall incorporate a 6-1/4" (15.9 cm) spout height at outlet and a 4" (10.2 cm) spout reach (c-c). Hot Water Dispenser Faucet shall be Newport Brass Model 106H/____ . [Point-of-Use Water Heater shall be Newport Brass Model 5-036].
EAST LINEAR
Codes / Standards ComplianceMeets or exceeds the following at date of manufacture:
• ASME A112.18.1/CSA B125.1
• IAPMO/cUPC
• IPC
• NSF 61
• Energy Policy Act of 1992
• All applicable US Federal and State material regulations
Hot Water Dispenser FaucetFeatures• Solid brass construction
• Quarter-turn washerless ceramic disc valve cartridge
• Spout assembly with integral supply hoses
• Spring-loaded, normally closed lever handle
• 6-1/4" (15.9 cm) spout height at outlet
• 4" (10.2 cm) spout reach (c-c)
• 1.5 gallons (5.7 liters) per minute maximum flow rate
• For single hole configurations
Page 1 of 2 Spec_106H_rev-b 08.13 t: 949.417.5207 l www.newportbrass.com ©2013 Brasstech, Inc.
Product Specification: Add "Color / Finish" suffix to Model number, below.
The Hot Water Dispenser Faucet shall be made of solid brass construction. Faucet shall incorporate a spout assembly with integral supplyhoses and feature a quarter-turn washerless ceramic disc valve cartridge. Hot Water Dispenser Faucet shall have a 1.5 gallons (5.7 liters) per minute maximum flow rate and accommodate single hole configurations. Product shall incorporate a 6-1/4" (15.9 cm) spout height at outlet and a 4" (10.2 cm) spout reach (c-c). Hot Water Dispenser Faucet shall be Newport Brass Model 106H/____ . [Point-of-Use Water Heater shall be Newport Brass Model 5-036].
15S10B 26 Other15
Specified ModelModel Description Colors | Finishes106H Hot Water Dispenser Faucet
5-036 Point-of-Use Water Heater (115V, 140¡F to 190¡ range)
Colors / Finishes
Colors / Finishes• 10B: Oil Rubbed Bronze• 15: Polished Nickel• 15S: Satin Nickel• 26: Polished Chrome
• Other: Refer to the Newport Brass catalog for additional color/finish options.
106H
*A Water Dispenser flow rate of approximately 1 gpm or less is typical but will vary depending on installation specific factors including in-line water pressure and water filtration system.
Point-of-Use Water Heater (115V, 140° to 190° range)
The Hot Water Dispenser Faucet shall be made of solid brass construction. Faucet shall incorporate a spout assembly with integral supply hoses and feature a quarter-turn washerless ceramic disc valve cartridge. Hot Water Dispenser Faucet shall have a 1 gallon (3.6 liters) per minute maximum flow rate and accommodate single hole configurations. Product shall incorporate a 6-1/4” (15.9 cm) spout height at outlet and a 4” (10.2 cm) spout reach (c-c). Hot Water Dispenser Faucet shall be Newport Brass Model 106H/____ . [Point-of-Use Water Heater shall be Newport Brass Model 5-036].
page 2 of 2 spec_
Product Dimensions (units are in inches)
©2012 Brasstech, Inc.
106H
106HEast Linear Hot Water Dispenser Faucet
t: 949.417.5207 | www.newportbrass.comPage 2 of 2 Spec_106H_rev-b 08.13 t: 949.417.5207 l www.newportbrass.com©2013 Brasstech, Inc.
106H
Page 2 of 2 Spec_106H_d_6/15 t: 949.417.5207 l www.newportbrass.com ©2015 Brasstech, Inc.
