TMC5130

Trinamic

Motor Controland Driver

A monthly selection of the latest products from EEWeb

FEATURED PRODUCTSApril 2015S U P P L E M E N T

eeweb.com/register

Join Today

MYLINK

4

Multi-Output Fault Tolerant LED DriverHere is a look back of Allegro MicroSystems’ A8521 released since 2013. The A8521 is a highly efficient fault tolerant white LED driver providing multiple output, features wide input voltage range, and is intended for small-size LCD backlighting. This device incorporates a current-mode boost converter with internal power switch and four current sinks. The boost converter can drive up to 48 LEDs, 12 LEDs per string, at 80 mA. The LED sinks can be paralleled together to achieve even higher LED currents, up to 320 mA...Read More

Single Phase EMI Power Line FilterThe RPM7050 is a series of Military/Commercial-off-the-shelf (MIL/COTS) EMI power line filters from Radius Power, that have operating voltage of 300 VAC. These devices have hipot rating of 1800 VDC, ensuring safety on applications involving high voltages. The filters have rated current range of 5 – 30 A, operating effectively on locations with ambient temperature range of -40ºC to +70ºC...Read More

MiniPOD™ 12x10G Receiver ModuleThe Avago AFBR-821vx3Z is a 12-channel pluggable, parallel fiber optics receiver module device that supports 12×10G bandwidth with OM3 link distance up to 300 meters. The AFBR-811vx3Z and AFBR-821vx3Z are a Tx/Rx module pair optimized for short-range parallel multi-lane data communication and interconnect applications. It is also designed to operate over multimode fiber systems using a nominal wavelength of 850 nm...Read More

NTSC/PAL Digital Video EncodersThe CS4954/55 is a digital video encoder featuring multi-standard support for NTSC-M, NTSC-JAPAN and PAL. It offers multi-standard teletext and wide-screen signaling support, as well as an on-chip voltage reference generator and host interface configurable for parallel or I2C operation...Read More

FEATURED PRODUCTS SUPPLEMENT

5

SMT Mini Wideband RF TransformersThe JA4220-AL is a surface mount RF transformer featuring wide 3-dB bandwidth and a maximum current rating of 250 mA. It complies with the RoHS standard, with tin-silver-copper over silver-platinum-glass frit terminations...Read More

Digi-Key Rounds Out LED PortfolioPhilip Lumileds signed a global distribution agreement with Digi-Key Corporation to its LED products. This move expands Digi-Key’s LED portfolio and strengthens their position as one of the largest distributors of LED products and suppliers. All of the Philips Lumileds quality LED products are now available at Digi-Key website...Read More

Adjustable, 1.6 MHz Boost RegulatorThe FAN5333A is a pulse-width modulated (PWM) current-mode boost converter that is capable to improve the performance of battery powered equipment by significantly minimizing the spectral distribution of noise at the input caused by the switching action of the regulator. In order to facilitate effective noise filtering, the switching frequency was chosen to be high, 1.5 MHz...Read More

MB86M31 Chip for Real-time 4K Video EncodingSocionext Inc. has started sampling the world’s first HEVC/H.265 - compatible encoder IC, the MB86M31, along with an evaluation board, the MB86M31-EVB, and the software development kit for drivers and applications. The new device is capable of real-time encoding of 4K/60p video with the latest video compression technology. HEVC achieves the transmission of realistic 4K video at half the cost of the preceding AVC/H.264 technology without a loss of quality. This new format is being adopted rapidly worldwide, as 4K video is becoming more and more popular. Real-time encoding of 4K video used to require parallel processing using multiple CPUs...Read More

6

Precision DPM with Serial InterfaceThe ISL28022 is a part of Intersil’s Operational Amplifier and Buffers portfolio. The device is a bidirectional high-side and low-side digital current sense and voltage monitor with serial interface. The device provides the current and voltage results digitally along with calculated power...Read More

Matrix Driver with Boost ConverterThe LDS8720 is a matrix LED driver featuring high efficiency boost converter operating at an input voltage range from 2.7 to 5.5 V. It does not require an external Schottky diode, and offers protection against overvoltage, under-voltage, over-current and over-temperature...Read More

High Temperature Hermetic Half BridgeThe MSK4105 is a high temperature 600 V/10 A hermetic half bridge that features Silicon Carbide (SiC) MOSFETSs and diodes. This device operates in a wide temperature range of -55 ºC to +190 ºC, making it ideal for applications that requires a +175 ºC. SiC (Silicon Carbide) technology has superior switching performance compared to Si-based modules. This product is capable of delivering 20 amps of continuous current at room temperature. At full rated temperature of +190 °C, the MSK4105 can deliver an impressive 10 amps of continuous current ...Read More

Aluminum Filled Epoxy AdhesiveThe EP22 is a room temperature curing, aluminum filled epoxy adhesive that has a simple one to one mix ratio by weight or volume. It offers durable high strength and tough bonds with excellent adhesion to metals, especially steel and aluminum. This bond has outstanding thermal cycling resistance and can endure chemicals such as water, oil nad most organic solvents...Read More

FEATURED PRODUCTS SUPPLEMENT

7

DPST Miniature Power RelayThe AZ733W is a series of Dual-Pole Single-Throw (DPST) switch power relays from American Zettler that are offered in miniature sizes, best suited for applications that requires lesser board space. The devices’ coil power reaches up to 450 mW and its resistive load maximum switching power is 300 W. Enclosed in a P.B.T. polyester, the products’ terminals are made from tinned copper alloy...Read More

Highly Integrated IO-Link® Temp SensorThe new MAXREFDES42# is a highly accurate IO-Link temperature sensor reference design for use with a 2-wire, 3-wire, or 4-wire PT100 RTD over a wide temperature range. The design makes use of Maxim Integrated’s highly integrated MAX31865 RTD-to-digital converter which is built in an industrial form factor. Designers can save power, cost, and space with this IO-Link temperature sensor reference design (RD) that definitely increases uptime for industrial control and automation ...Read More

Triaxis®- Innovative Magnetic Sensor TechnologyMelexis Triaxis® is trademarked term to describe an innovative magnetic sensor technology. It features an on-chip signal processing for robust position sensing with enhanced self-diagnostics features and assembly misalignment tolerant typically used in automotive and non-automotive applications...Read More

5 GHz RF Power Amplifier ModuleMicrochip Technology launched the SST11CP22, a 5 GHz power amplifier module (PAM) for the IEEE 802.11ac ultra high data rate Wi-Fi® standard. This PAM delivers 19 dBm linear output power at 1.8% dynamic EVM (Error Vector Magnitude) with MCS9 80 MHz bandwidth modulation. Additionally, the SST11CP22 delivers 20 dBm linear power at 3% EVM for 802.11a/n applications, is spectrum mask compliant up to 24 dBm for 802.11a communication, and has less than – 45 dBm/MHz RF harmonic output at this output power, making it easier for the system board to meet FCC regulations ...Read More

8

Right-Angle AK-2 Cable AssembliesThe Molex Squib Right-Angle cable assemblies are connectors developed by Molex that achieves fail-safe connections in automotive safety-restraint-system. It features AK-2 interface with unique CPA design and welded-cable connection that maintains low and stable contact resistance under severe temperature and vibration conditions...Read More

5 Amp Input LED-Display AC AmmetersMurata’s ACA5-20PC Series AC Ammeters are capable of digitally displaying 5 A output current transformers. ACA5-20PC meters are either ac (120/220 Vac @ 50/60 Hz) or dc (+5 – 40 V) powered. Each meter is housed in a subminiature, 1.38” x 0.88”, epoxy-encapsulated package whose behind-the-panel installation depth is 2 inches...Read More

High Speed Inverter with XSON6 PackageThe 74AHC1G04GM is an inverter composed of high speed Si-gate CMOS. It serves as an inverting buffer to a wide variety of applicatons. It features symmetrical output impedance, high noise immunity, low power dissipation, balanced propagation delays, and ESD protection. It uses an XSON6 package and is operational to a temperature range from -40 ºC to +125 ºC. The 74AHC1G04GM has CMOS input switching levels and supply voltage range 2 V to 5.5 V...Read More

Eight-Port Ethernet SwitchOnlinecomponents.com, an authorized dealer of Phoenix Contact products, introduces an addition to the industrial ethernet switches, the FL Switch SF 7TX/FX, with part number 2832726. The switch is IEEE 802.3 standard compliant that functions basically as an unmanaged switch or auto negotiation with 10/100 Mbps transmission speed...Read More

FEATURED PRODUCTS SUPPLEMENT

9

High Performance 150 V DiodesPower Integrations expands its Qspeed™ 150 V diodes with the addition of LQA150 series. This series features excellent softness for low EMI. Based on the company’s Qspeed merged-PIN technology, the diodes have the lowest junction capacitance (CJ) and lowest reverse recovery charge (QRR) in the market— respectively 60% and 40% lower than trench Schottky devices ...Read More

Practical Tips for the UserRECOM´s DC/DC Book of Knowledge is a detailed introduction to the various DC/DC converter topologies, feedback loops (analogue and digital), test and measurement, protection, filtering, safety, reliability, constant current drivers and DC/DC applications. The level is necessarily technical, but readable for engineers, designers and students...Read More

High Performance PLL Clock GeneratorThe RD151TS502US is a high-performance, phase-locked loop clock generator featuring low jitters that enables high-density mounting in a small-size package. It has an input frequency of 27 MHz with supply voltages at 2.7 to 3.6 V...Read More

User-Friendly Arbitrary Waveform GeneratorThe DG5102 is a high precision and user friendly arbitrary waveform generator from RIGOL. It is equipped with various advanced functions like, IQ modulation, frequency hopping, IQ mapping selection and IQ mapping edit, which provide better user experience and higher level of accuracy in measurement. With a sample rate of 1 GSa/s and waveform length of up to 128 million points, the instrument is guaranteed to meet the high demands of today’s applications...Read More

10

Pushbutton Transmitter ModuleThe PTM 21x from EnOcean is a pushbutton transmitter module that enables wireless remote controls without using batteries. These devices have a built-in electro-dynamic power generator. These radio module family comes in three types; the PTM 210, PTM 210U, and PTM 215 in 868 MHz, 902 MHz, and 868 MHz respectively ...Read More

80 V N-Channel NexFET Power MOSFETThe CSD19506KCS is a N-channel NexFET™ power MOSFET with an output voltage of 80 V and a 2.0 mΩ drain-to-source on resistance. This device is intended to reduce losses in power conversion applications. It is maufactured with a TO-220 package...Read More

20 V Chipscale MOSFET for Ultraportable Apps Vishay Intertechnology, Inc. announced its new TrenchFET® 20 V chipscale MOSFET featuring decreased power consumption, and extended battery usage for ultraportable devices. The product provides the industry’s lowest on-resistance for any 20 V device in a compact 1 mm square footprint...Read More

PWM Controller IC for Networking AppsZMDI introduces an addition to the ZSPM15xx series, the ZSPM1509, a true-digital PWM controller IC designed for applications in networking, communications, and industrial applications. The device is capable of supporting loads of up to 10 A and is pre-configured for a power stage output of 5 V. Moreover, the device provides, with low noise and ripple, a highly accurate and efficient power conversion which makes it ideal for many FPGAs or SOCs...Read More

MYLINK

The TMC5130 from Trinamic is a stepper motor controller and driver IC with serial communication interfaces. This driver utilizes Trinamic’s stealthChop driver technology, which provides a unique waveform shape that ensures noiseless motor operation. The TMC5130 comes with an impressive evaluation kit that helps reduce the learning curve for engineers eager to implement this technology.

Demo Eval Kit

Motor Control and Driver

Trinamic

The TMC5130 from Trinamic is a stepper motor controller and driver IC with serial communication interfaces. This driver utilizes Trinamic’s stealthChop driver technology, which provides a unique waveform shape that ensures noiseless motor operation. The TMC5130 comes with an impressive evaluation kit that helps reduce the learning curve for engineers eager to implement this technology.

Demo Eval Kit

Motor Control and Driver

Trinamic

Specs

Watch VideoTo watch an overview of the TMC5130, click the image below:

Hardware

The TMC5130 eval kit comes with a very powerful and easy-to-use computer interface. This interface allows users to directly control the motor by programming the microsteps per second the direction the motor should go. Due to its high precision microstepping and quiet operation, the TMC5130 has a wide variety of possible applications, such as factory automation, CCTV, pumps, point-of-sale or ATMs, and any medical or lab applications requiring accurate motor control. The Trinamic eval kit for the TMC5130 is an impressive kit that shows how this controller and driver can make your motors quieter, more efficient, yet just as powerful.

Startrampe Interface Board

Eselsbrücke Bridge Board

TMC5130 Controller and Driver

Power Input

Stepper Motor Output

Driver Board

12 3

5

4

3

CLICK HERE

Specs

Watch VideoTo watch an overview of the TMC5130, click the image below:

Hardware

The TMC5130 eval kit comes with a very powerful and easy-to-use computer interface. This interface allows users to directly control the motor by programming the microsteps per second the direction the motor should go. Due to its high precision microstepping and quiet operation, the TMC5130 has a wide variety of possible applications, such as factory automation, CCTV, pumps, point-of-sale or ATMs, and any medical or lab applications requiring accurate motor control. The Trinamic eval kit for the TMC5130 is an impressive kit that shows how this controller and driver can make your motors quieter, more efficient, yet just as powerful.

Startrampe Interface Board

Eselsbrücke Bridge Board

TMC5130 Controller and Driver

Power Input

Stepper Motor Output

Driver Board

12 3

5

4

3

Sierra Circuits:A Complete PCB Resource

PLUS: The Ground ” Myth in PrintedCircuits

“

PCB Resin Reactor+

Ken BahlCEO of Sierra Circuits

Let There Be

How Cree reinvented the light bulb

LIGHT

David ElienVP of Marketing & Business

Development, Cree, Inc.

New LED Filament Tower

Cutting Edge Flatscreen Technologies

+

+

M o v i n g T o w a r d s

a Clean Energy

FUTURE— Hugo van Nispen, COO of DNV KEMA

MCU Wars 32-bit MCU Comparison

Cutting Edge

SPICEModeling

Freescale and TI Embedded

Modules

ARMCortex

Programming

From Concept to

Reality Wolfgang Heinz-Fischer

Head of Marketing & PR, TQ-Group

Low-Power Design Techniques

TQ-Group’s Comprehensive Design Process

+

+

PowerDeveloper

Octobe r 20 13

Designing forDurability

View more EEWeb magazines— Click Here