Featured Products of 2015
-
Upload
barrie-midler -
Category
Documents
-
view
79 -
download
2
Transcript of Featured Products of 2015
ARCHITECTURAL
Featured Products of 2015Ol ivar i , Bonait i , Fr itsJurgens & CEAM
The latest in European design and innovation100% made in Italy
2 Bellevue Architectural | +61 3 9571 5666 | [email protected] | www.bellevuearch.com.au
FritsJurgens by Bellevue - Smart Architectural Products
For over 30 years, the name Bellevue Architectural (formerly Bellevue Imports) has always been synonymous with providing the latest in designer fittings from the European marketplace that create visual attraction and differentiation without compromising quality, design or affordability. Bellevue’s products have been used all over Australia and New Zealand from small projects through to large (project pricing available). Bellevue’s products are designed and manufactured by people from within the design industry; people who truly believe that design and quality are an integral part of creating something special and unique.
Today Bellevue is proud to present the FritsJurgen range of concealed pivots. 100% Made in Holland, they are used in a variety of applications both commercial and residential. The FritsJurgen concealed pivots are ideal for doors that need to blend into a wall and provide a clean look and feel.
Aesthetically pleasing to the eye as they disappear once the door is closed; the FritsJurgen pivot system has won the prestigious German “Red Dot” design award. Used in residential, commercial and industrial environments, FritsJurgen pivots are ideal for front entry doors, office doors and partition doors, just to name a few.
Located in Holland, FritsJurgen is considered a world leader in innovation, design & quality. No other concealed pivot of this type can compete with FritsJurgen’s technical product strengths, durability, longevity and cost.
0°
90°
-90°
FritsJurgens Concealed Pivot- System1, 3 & 4Fully embedded in the door, no ugly floor plate
3Bellevue Architectural | +61 3 9571 5666 | [email protected] | www.bellevuearch.com.au
FritsJurgens by Bellevue - Smart Architectural Products
4 Bellevue Architectural | +61 3 9571 5666 | [email protected] | www.bellevuearch.com.au
FritsJurgens by Bellevue - Smart Architectural Products
FritsJurgens System4 stands out from other systems by virtue of the unique way in which the door closes. This pivot door system with infinitely variable closing force is suitable for doors up to 200kg. The system has a hold position at 90° and -90° degrees.
System4 comes with a 2 year manufactures guarantee
Adjustable closing force
Damped closure
Nothing to rebate inthe floor or ceiling
Very high bearing capacity
Maintenance free system
Simple, fast fitting
Brilliantly designed, the FritsJurgens fully concealed pivot systems are unlike traditional floor pivots due to being fully embedded in the door. There’s no visible pivot hardware at the top or bottom of the door, and an added benefit there’s nothing to rebate into the floor or ceiling; saving significant time and money on installation. This kind of installation makes the interface with the wall, floor and ceiling subtle and stylish. No imposing floor plate to diminish the visual attraction of the door.
This key aesthetic and design element is unique to the FritsJurgens systems and is no accident. All the FritsJurgens pivot systems have been designed with this key feature in mind.
Common Fuctions between the three different modelsRated to carry a door up to 500kg in weight, minimum pivot point from edge of door is 91mm, all three models completely concealed when door is closed. Nothing to rebate into the ceiling or floor, maintenance free for 136 years.
Specific to System 1.Designed as a free swinging pivot, movement from 0 to a full 360 degrees.
Specific to System3Traditional spring pivots require you to push the door to nearly, if not, 90° before the hold open activates. System3 only requires the door to go beyond 45° for activation. By letting go at that point; System3 will automatically move the door into the hold open position by itself. Movement: full 360 degrees.
The Self Close function works in reverse. By letting go before the door reaches 45°, the door will self-close; it will move by itself back to its original position.
Specific to System4
FritsJurgens Concealed Pivot- System1, 3 & 4Fully embedded in the door, no ugly floor plate
bottom pivot
Product Code
max door weight (kg)
maximum door weight at guaranteed closing force (kg)
maximum door width (mm)
FJS42SK 500 up to 200 4000 (2000 from pivot point)
Swing: 90° to -90° (180) Hold Open 90°, 0°, -90°
Soft close with variable closing speedSelf close - let go before 88°, within each 90° quadrant
Hold open - push the door past 88°, within each 90° quadrant
In Depth Profile: FritsJurgens System4
Ideal for hydronic heated floors
Minimum pivot point: 91mm from door edge
top pivot
ceiling plate
floor plate
Note: Consult with your builder and or door manufacture as to required door thickness before door is ordered. Recommended minimum door thickness is 50mm if factory fitted, thicker if done by hand.
The System4 pivot has been designed to provide 0° to 90° for single swing doors, or 0° to 180° movement for double action doors. In either case the door will always stay open with the built in Hold Open function set at 90° and -90°.
System4 incorporates an adjustable closing force feature, this feature allows you to increase and decrease the closing force / strength of the pivot, thus the speed of the door. If the door is moving too fast, simply increase the brake and it will slow down.
5Bellevue Architectural | +61 3 9571 5666 | [email protected] | www.bellevuearch.com.au
Olivari by Bellevue - Italian Architectural Handles
Nothing to rebate inthe floor or ceiling
Very high bearing capacity
Maintenance free system
All too many times we see door hardware (including 316 marine grade stainless steel), commercial and domestic, whose finish is t-stained and tarnished, or the handle surface has pitted - even the lustre of the handle starts to dissipate due to exposure to sea air. Environmental conditions such as salt air can erode and even destroy a handle and its finish. The revolutionary SuperInox Satin & SuperInox Brass; by Olivari of Italy, will maintain the look and feel of your investment, and is guaranteed to do so for 30 years. It will not T-stain, tarnish or loose its luster even if fully exposed to the strong-est of sea-air environments. This is why SuperInox is considered to be stronger than 316 marine grade stainless steel. SuperInox finished handles are ideal for all ocean front projects; large or small. Ideal for high traffic areas like front doors, bedroom doors, as well as offices and hotels, and importantly coastal environments.
The newest addition to the SuperInox family, Olivari’s new SuperInox Anthracite has a dark, grey / black finish. It also will not rust, tarnish, pitt, t-stain or lose its lustre, even if fully exposed to the strongest of sea-air environments; and it’s guaranteed not to do so for 10 years.
SUPERINOX SATIN SUPERINOX ANTHRACITE
Olivari of Italy - SuperInox FinishesA finish range guaranteed not to tanish in sea air enviroments
Bonaiti by Bellevue - Smart Architectural Products
6 Bellevue Architectural | +61 3 9571 5666 | [email protected] | www.bellevuearch.com.au
no visible striker plate = clean & simple lines
Lever Set: Olivari Total M207S2IS
7Bellevue Architectural | +61 3 9571 5666 | [email protected] | www.bellevuearch.com.au
Bonaiti by Bellevue - Smart Architectural Products
In 2008, Bellevue Architectural released Bonaiti of Italy’s range of magnetic locks and latches into the Australian & New Zealand markets with incredible success,;which we still enjoy today. We are proud to say, we created the magnetic locks and latch industry.
An ideal solution for any project where clean simple design & quality is fundamental.
NO VISIBLE STRIKER PLATE, NO PROTRUDING LATCH TONGUE.
CLEAN & SIMPLE LINES.100% MADE IN ITALY.
Quick Facts
Compatibility Standard Australian, European door hardware
Reliability Tested to over 400,000 cycles
Spindle Size 8mm or 7.65mm
Back Set Hub 60mm
Visible Striker Plate No
Visible Latch Tongue No
Tongue Action Noise Silent
Place of Manufacture Italy
Guarantee 2 years
Massive worldwide install base including Australia and New Zealand.
Now new finishes including Black & White
ØR5
,5
21
25,5
41,2
57,4
12,75
16.5
1.5
17.5
19.6
ØR2
,5
25,5
41,2
14
57,4
A 60mm
B 90mm
11
14
1,6
3,1
1,5
20 23,4
14,5
23,5
15,3
22,7
R2,5
5
57,4
41,2
Ø 5
25,5
AB
Bonaiti Magnetic - Passage Tube LatchDesigned to provide a seamless door to wall environment
BL001 Overview: The BL001 magnetic tubular passage latch represents the next leap forward in door latching hardware. Specifically designed to provide a clean look between the door and its’ jamb; by not using a visible striker plate. An added feature is when the door is open there is no protruding latch tongue when the door is open. The BL001 is a real and cost effective alternative to traditional tubular latching mechanisms. It is the ideal latch for any project where design and quality is fundamental.
Aesthetics: There is no visible striker plate when the door is closed; as a result you have a clean door & jamb. When the door is open, there is no unsightly latch tongue protruding from the edge of the door to catch your clothes on - a clean look.
Functionality: It works in the same way that any standard swinging door latch would; pull down on the lever and pull or push the door. Its incredibly quiet as well.
No Protrusion: There is no chance of catching clothes or arms on protruding latch tongues & striker plates, as they do not exist with the BL001.
Wide Door Jambs: No need to custom make a visible unsightly, costly striker plate for wide door jambs. The BL001 latch only engages when the door is in the closed position.
Reliability: Massive Australian & New Zealand install base. Tested to over 400,000 cycles - totally reliable. Over 10 years of in market product experience built into every unit. Made 100% in Italy.
Finish: A wide range of finishe’s available including satin chrome, bright chrome, polished brass, bronze, black and white.
Rebated Doors & Steel Frames: Using the BL003 rebate kit allows you to use the magnetic latch on standard timber rebated doors. For steel frame jambs, you can now use the BL003A Steel frame receiver cup.
Tie Through Handle Compatibility: The BL001 has been specifically designed to cater for all industry standard bolt through door furniture. Holes exist to the left and right of the hub for the tie through bolts.
30o Turn Version: Use the BL001T range if your lever sets
requires the latch to turn no more than 30o due to its spring
construction, if you want a short throw.
Magnetic Latch specification Codes
BL001 finish - Magnetic Tube Latch 60mm Back SetBL001T finish - 30
o Turn Magnetic Tube Latch 60mm Back Set
Finish Guide:SC= Satin Chrome, CR = Bright Chrome, PB = Polished Brass, BZ = Bronze, BL = Matt Black and WH = White.
OptionsBL003SC - Rebate Kit for BL001, BL001T & BL002CL003ASC - Metal jamb Receiver cup BL001, BL001T & BL002
8 Bellevue Architectural | +61 3 9571 5666 | [email protected] | www.bellevuearch.com.au
Ceam by Bellevue - Smart Architectural Products
Made 100% in Italy by CEAM - 2D Y & Z Adjustable: Max 60kg Glass DoorBAC1080Quick ReleaseBAC1080
Specifically designed to butt glass doors up against a wall or jamb, the BAC1080 2D fully adjustable concealed patch plate hinge is rated to hold a 8-10mm thick 60kg glass door. It’s revolutionary in it’s’ design, by combining a patch plate and invisible hinge together.
Not only can you adjust the position of the glass door in 2 dimensions (up down & left, right) but you can also take the door down without having to remove the hinge from its rebated housing in the jamb or wall.
Patch plate to wall… clean and sophisticated
Rated to carry an 8-10mm thick 60kg glass door to 90°, or 180° opening, the hinge is extremely versatile and reliable. Tested to
150,000 opening and closing cycles. Cost effective and highly functional, it is a real and effective alternative to traditional and unsightly glass door hinges and pivot systems.
Quick release: Ceam’s quick release system is revolutionary - once installed, you never need touch the door or jamb again.
The hinge sits within a cup; the cup is rebated into jamb or directly into the wall, the hinge is then fastened to the cup. As a result, if the door needs to come down, all you do is unscrew the locking bolts and remove the hinge from the cup.
The door can be removed and reinstalled for painting and adjustmenting without
damaging the walls render, timber or paint work, saving time and money.Door movement: over time, this can be an expensive problem to fix. Not with the BAC1080 2D fully adjustable hinge; it specifically caters for door movement.
Once movement occurs, a door may not close properly or rub the paintwork. To fix; the door needs to come down and the door and/or jamb needs to be planed and repainted; a costly and time consuming effort.
Using the BAC1080; simply adjust the position of the door via the settings within the hinge. This adjustment is done without removing the door.
BAC1080 Quick FactsMin. glass thickness 8 -10mmMax. door weight 60kgNarrow rebate 21.5mmGap when closed 3mmWorking aperture 180°
Manufacturing location 100% Made in ItalyReliability Certified to over 150,000 cyclesAdjustable Full 2D adjustment on 2 (Y, Z) axesQuick Release Ceam quick release system, never
need to touch the jamb again
BAC1080 Order CodesBAC1080CR ChromeBAC1080SC Satin ChromeBAC1080PC Powder CoatBACJIG-BACT1080 Jig and hinge template (rent or buy)
up to 60kg
-1 mm+2 mm
-2,5 mm+2,5 mm
BAC1080PCBAC1080SCBAC1080CR
New Model for Glass Doors
Ceam 2D Invisible Hinge - BAC1080 GlassDesigned to provide a seamless Glass door to wall environment