FD960 Density Meter
-
Upload
saidrahmansyah4750 -
Category
Documents
-
view
225 -
download
0
Transcript of FD960 Density Meter
-
7/27/2019 FD960 Density Meter
1/2ISSUE: FD960/MAY2001/UK
continuous on-line density measurement
accuracy to 0.0001g/cm3 reading
straight through flow
hazardous area applications
insensitive to plant / pipeline vibration
wide operating temperature span
low pressure drop
intrinsically safe and compact design
high flow rate capability
no on-site calibration required
secondary containment
Sarasota
Fiscal Density Meter
FD960
Features
The Sarasota FD960 density meter is designed for highaccuracy measurement of high value process liquids andslurries.
Dimensional drawing
Applications batch control multi-product pipeline metering
product interface detection custody transfer
Detailed specification and ordering information: see overleafThermo Measurement reserves the right to alter specifications without notice.
89mm
206.5mm
530mm
198mm
128mm
271mm
-
7/27/2019 FD960 Density Meter
2/2
Specification
Thermo Electron CorporationKings Worthy
Winchester, HampshireSO23 7QA, United Kingdom
Tel: +44 (0) 1962 625000Fax: +44 (0) 1962 885530email: [email protected]
Thermo Electron Corporation9303 W. Sam Houston Parkway South
HoustonTexas77099 5298 USA
Tel: +1 (713) 272 0404Fax: +1 (713) 272 2273
Ordering Information
Transducer:
Operating range: 0 to 2.1g/cm3
Factory calibration range: 0.65 to 1.6g/cm3
Accuracy: 0.0001g/cm3
Repeatability: 0.00002g/cm3
Temperature effect:
(corrected) see Note 1 0.000005g/cm3/C
Process temperature: -50 to +110C
Pressure effect:
(corrected) see Note 1 0.000003g/cm3/bar
Operating pressure: As flange rating
Materials of construction: Sensor Ni-Span-C
Other wetted materials 316L
stainless steel
Case 316L stainless steel
Electronics housing copper free
aluminium grey epoxy finish
Temperature measurement: High accuracy 13 DIN
Integral 4 wire PT100General:
Environmental protection: IP65Hazardous area certification: FD960F EEx ia IIC T6
EEx d IIC T4/T3
Weight: Nett 11kg max
Shipping 20kg max
Installation: Vertical as standard
Optionally horizontal
Flow range: 0-300 l/min
5-300 l/min when installed horizontally
Electrical:
Output: Frequency related to density on 2 wire
current modulated loop 6mA to 18mA
4 wire PT100
Power supply: 16-28 VDC 10mA average (peak 18mA)
Connections: Screw terminals
Cable entry: 2 x 34 NPT
Operating temperature
(ambient): -20 to +70C
Note: Where an X option is chosenthe option must be described fully,in writing. Please contact salesoffice for pricing.
Example: FD960-F-1-F-A0-S
FD960 fiscal density meter with frequency output, 0.0001g/cm3, standardtemperature range, 1 ANSI Class 600 RF flanges for use in non-hazardous areas.
Density meter model code format
FD960 Sarasota Fiscal Density Meter
Signal output
F Frequency output
Transducer accuracy1 0.0001g/cm3
Temperature range
F -50 to +110C
Process connections
B0 1 ANSI B16.5 Class 150 RF flanges
B1 1 ANSI B16.5 Class 150 DUPLEX flanges
F0 1 ANSI B16.5 Class 300 RF flanges
F1 1 ANSI B16.5 Class 300 DUPLEX flanges
A0 1 ANSI B16.5 Class 600 RF flanges
A1 1 ANSI B16.5 Class 600 DUPLEX flanges
D BS4504 PN40 DN25 RF flanges (form D)
X Other flange type (see note)
Certification
S Non-hazardous / safe area application
I Intrinsically safe EEx ia IIC T6
D Flameproof EEx d IIC T4/T3
Options
M Wetted parts material certificates (DIN 50049 BS EN 10204 3.1b)
T Traceable calibration certificate
Note 1 - Corrected temperature and pressure effects after applying
correction coefficients
HART is a registered trademark of the Hart Foundation