fd analog 1-48e 1..10V LED dimmer - feno · Combinable with the following feno products . fd analog...
Transcript of fd analog 1-48e 1..10V LED dimmer - feno · Combinable with the following feno products . fd analog...
fd analog 1-48e 1..10V LED dimmer
1/2 © feno GmbH / Stand Datum
fd analog 3-48e
fd booster 3-48e
LED dimmer with 9A constant voltage output for smooth control especially in lower dimming
range.
Properties
• Robust constant voltage dimmer with high current
capacity
• Protected against short-circuit and overtemperature
• Smooth dimming control even in the lowest range
• Dimming curve matched to eye sensitivity
• Control with potentiometer or 1..10V control devices
• Plastic housing construction with cable grip
Ordering Information
Product name
Item number
fd analog 1-48e
0000 4023
Available Versions
Combinable with the following feno products
fd analog 1-48e 1..10V LED dimmer
2/2 © feno GmbH / Stand Datum
Supply voltage 10..48 V DC (SELV)
Power consumption 9,2 A max.
Control inputs 1
Control signal 1..10 V
Operating mode Constant voltage
Outputs 1
Dimming frequency / internal
resolution
240 Hz/16 Bit
Output voltage 10..48 V DC
Output load 1 x 9 A
Outputs short circuit proof yes
Ambient temperature -20..45 °C
Wiring Diagram
Technical Details
Zusatzinfo
• ZusatzinfoInhalt
Normen
NormenInhalt
fd analog 3-48e RGB 1..10V LED dimmer
1/2 © feno GmbH / Issue: 19.10.2015
fd analog 1-48e
fd booster 3-48e
RGB LED dimmer with three 3A constant voltage outputs for smooth control, especially in lower
dimming range.
Properties
• Robust constant voltage dimmer with high current
capacity
• Protected against short-circuit and overtemperature
• Smooth dimming control even in the lowest range
• Dimming curve matched to eye sensitivity
• Control with potentiometer or 1..10V control devices
• Plastic housing construction with cable grip
Ordering Information
Product name
Item number
fd analog 3-48e
0000 4025
Available Versions
Combinable with the following feno products
fd analog 3-48e RGB 1..10V LED dimmer
2/2 © feno GmbH / Issue: 19.10.2015
Supply voltage 10..48 V DC (SELV)
Power consumption 9,2 A max.
Control inputs 3
Control signal 1..10 V
Operating mode Constant voltage
Outputs 3
Dimming frequency / internal
resolution
240 Hz/16 Bit
Output voltage 10..48 V DC
Output load 3 x 3 A
Outputs short circuit proof yes
Ambient temperature -20..45 °C
Dimensions (L/W/H) 167 x 42 x 31 mm
Weight 90 g
Wiring Diagram
Technical Details Additional Information
• Controllable with potentiometer (100k lin.)
Standards
EN 61347-1
EN 61347-2-11
EN 61347-2-13
EN 55015
EN 61547
EN 61000-3-2
EN 61000-3-3
fd sequencer 3-48e RGB LED sequencer
1/2 © feno GmbH / Issue: 16.10.2015
fd s.sequencer 6-48d
fd booster 3-48e
RGB PWM sequencer with three 3A constant voltage outputs and pre-programmable colour
changer with adjustable brightness and speed.
Properties
• Robust constant voltage sequencer with high current
capacity
• Protected against short-circuit and overtemperature
• Smooth, progressive colour change
• Adjustable brightness and speed
• Control with potentiometer or 1..10V control devices
• Plastic housing construction with cable grip
Ordering Information
Product name
Item number
fd sequencer 3-48e
0000 4081
Available Versions
Combinable with the following feno products
fd sequencer 3-48e RGB LED sequencer
2/2 © feno GmbH / Issue: 16.10.2015
Supply voltage 10..48 V DC (SELV)
Power consumption 9,2 A max.
Control inputs 2
Control signal 1..10 V
Operating mode Constant voltage
Programmed sequences 1 (pre-programmed)
Outputs 3
Dimming frequency / internal
resolution
240 Hz/16 Bit
Output voltage 10..48 V DC
Output load 3 x 3 A
Outputs short circuit proof yes
Ambient temperature -20..45 °C
Dimensions (L/W/H) 167 x 42 x 31 mm
Weight 90 g
Wiring Diagram
Technical Details Standards
EN 61347-1
EN 61347-2-11
EN 61347-2-13
EN 55015
EN 61547
EN 61000-3-2
EN 61000-3-3
fd booster 3-48e RGB PWM booster
1/2 © feno GmbH / Issue: 19.11.2014
fd sequencer 3-48e fd analog 3-48e
fd dali 3-48e fd dmx 3-48e
RGB PWM dimmer amplifier with three 3A constant voltage output for galvanically separated
power amplification of RGB LED dimmers.
Properties
• Robust constant voltage amplifier with high current
capacity
• Protected against short-circuit and overtemperature
• Allows different supply voltages within a dimming
range
• Plastic housing construction with cable grip
• Wider input frequency range, 100-1000 Hz
• Can also be used as a 1-channel device with 9 A by
connecting the inputs and outputs in parallel
Ordering Information
Product name
Item number
fd booster 3-48e
0000 4029
Combinable with the following feno products
fd booster 3-48e RGB PWM booster
2/2 © feno GmbH / Issue: 19.11.2014
Supply voltage 10..48 V DC (SELV)
Power consumption 9,2 A max.
Control inputs 3
Control signal PWM 10..48 V DC/15mA
Operating mode Constant voltage
Outputs 3
Dimming frequency / internal
resolution
240 Hz/16 Bit
Output voltage 10..48 V DC
Output load 3 x 3 A
Galvanic isolation yes
Outputs short circuit proof yes
Ambient temperature -20..45 °C
Dimensions (L/W/H) 167 x 42 x 31 mm
Weight 90 g
Wiring Diagram
Technical Details Standards
EN 61347-1
EN 61347-2-11
EN 61347-2-13
EN 55015
EN 61547
EN 61000-3-2
EN 61000-3-3
fd dali 1-48e
DALI LED dimmer
1/2© feno GmbH / Issue: 31.08.2015
fd dali 3-24e
fd booster 1-24e fc s.multi 4d
fi dmx-dali 1e
Digital LED dimmer with 9A constant voltage output for smooth control, especially in lower
dimming range.
Properties
� Robust constant voltage dimmer with high current
capacity
� Protected against short-circuit and overtemperature
� Smooth dimming control even in the lowest range
� Dimming curve matched to eye sensitivity
� Digital control with DALI control devices
� Plastic housing construction with cable grip
Ordering Information
Product name
Item number
fd dali 1-48e
0000 4020
Available Versions
Combinable with the following feno products
fd dali 1-48e
DALI LED dimmer
2/2© feno GmbH / Issue: 31.08.2015
Supply voltage 10..48 V DC (SELV)
Power consumption 9,2 A max.
Control inputs 1
Control signal DALI
Operating mode Constant voltage
Outputs 1
Dimming frequency / internal 240 Hz/16 Bit
Output voltage 10..48 V DC
Output load 1 x 9 A
Galvanic isolation yes
Outputs short circuit proof yes
Ambient temperature -20..45 °C
Dimensions (L/W/H) 167 x 42 x 31 mm
Weight 90 g
Wiring Diagram
Technical Details Additional Information
� Not for use in EIB/KNX-Gateways
Standards
EN 61347-1
EN 61347-2-11
EN 61347-2-13
EN 55015
EN 61547
EN 61000-3-2
EN 61000-3-3
fd dali 3-48e RGB DALI LED dimmer
1/2 © feno GmbH / Issue: 22.06.2015
fd dali 1-48e
fd booster 3-48e fc s.multi 4d
fi dmx-dali 1e
Digital RGB LED dimmer with three 3A constant voltage outputs for smooth control, especially
in lower dimming range.
Properties
• Robust constant voltage dimmer with high current
capacity
• Protected against short-circuit and overtemperature
• Smooth dimming control even in the lowest range
• Dimming curve matched to eye sensitivity
• Digital control with DALI control devices
• Plastic housing construction with cable grip
Ordering Information
Product name
Item number
fd dali 3-48e
0000 4027
Available Versions
Combinable with the following feno products
fd dali 3-48e RGB DALI LED dimmer
2/2 © feno GmbH / Issue: 22.06.2015
Supply voltage 10..48 V DC (SELV)
Power consumption 9,2 A max.
Control inputs 1
Control signal DALI
Operating mode Constant voltage
Outputs 3
Dimming frequency / internal
resolution
240 Hz/16 Bit
Output voltage 10..48 V DC
Output load 3 x 3 A
Galvanic isolation yes
Outputs short circuit proof yes
Ambient temperature -20..45 °C
Dimensions (L/W/H) 167 x 42 x 31 mm
Weight 90 g
Wiring Diagram
Technical Details Additional Information
• Not for use in EIB/KNX-Gateways
Standards
EN 61347-1
EN 61347-2-11
EN 61347-2-13
EN 55015
EN 61547
EN 61000-3-2
EN 61000-3-3
fd dsi 1-48e DSI LED dimmer
1/2 © feno GmbH / Issue: 25.03.2014
fd booster 1-24e fc s.multi 4d
fi dmx-dsi 1e
Digital LED dimmer with 9A constant voltage output for smooth control, especially in lower
dimming range.
Properties
• Robust constant voltage dimmer with high current
capacity
• Protected against short-circuit and overtemperature
• Smooth dimming control even in the lowest range
• Dimming curve matched to eye sensitivity
• Digital control with DSI control devices
• Plastic housing construction with cable grip
Ordering Information
Product name
Item number
fd dsi 1-48e
0000 4021
Combinable with the following feno products
fd dsi 1-48e DSI LED dimmer
2/2 © feno GmbH / Issue: 25.03.2014
Supply voltage 10..48 V DC (SELV)
Power consumption 9,2 A max.
Control inputs 1
Control signal DSI
Operating mode Constant voltage
Outputs 1
Dimming frequency / internal
resolution
240 Hz/16 Bit
Output voltage 10..48 V DC
Output load 1 x 9 A
Galvanic isolation yes
Outputs short circuit proof yes
Ambient temperature -20..45 °C
Dimensions (L/W/H) 167 x 42 x 31 mm
Weight 90 g
Wiring Diagram
Technical Details Standards
EN 61347-1
EN 61347-2-11
EN 61347-2-13
EN 55015
EN 61547
EN 61000-3-2
EN 61000-3-3
fd touch 1-48e Touch LED dimmer
1/2 © feno GmbH / Issue: 17.06.2015
fd dali 1-48e fd dmx 1-48e
fd analog 1-48e
Digital LED dimmer with a 9A constant voltage output for smooth control, especially in lower
dimming range.
Properties
• Robust constant voltage dimmer with high current
capacity
• Protected against short-circuit and overtemperature
• Smooth dimming control even in the lowest range
• Dimming curve matched to eye sensitivity
• Plastic housing construction with cable grip
• Touch-Dim function via pushbutton
• Galvanic isolation
Ordering Information
Product name
Item number
fd touch 1-48e
0000 4221
Available Versions
fd touch 1-48e Touch LED dimmer
2/2 © feno GmbH / Issue: 17.06.2015
Supply voltage 12..48 V DC (SELV)
Power consumption 9 A max.
Control inputs 1
Control signal Pushbutton signal (Touch)
Operating mode Constant voltage
Outputs 1
Dimming frequency / internal
resolution
240 Hz/16 Bit
Output load 1 x 9 A
Galvanic isolation yes
Outputs short circuit proof yes
Ambient temperature -20..45 °C
Dimensions (L/W/H) 167 x 42 x 31 mm
Weight 90 g
Wiring Diagram
Technical Details Standards
EN 61347-1
EN 61347-2-11
EN 61347-2-13
EN 55015
EN 61547
EN 61000-3-2
EN 61000-3-3
fd dmx 1-48e DMX LED dimmer
1/2 © feno GmbH / Issue: 01.10.2014
fd dmx 3-48e
fc s.dmx 48d fc s.dmx 144d
fc dmx 512u
Digital LED dimmer with 9A constant voltage output for smooth control, especially in lower
dimming range.
Properties
• Robust constant voltage dimmer with high current
capacity
• Protected against short-circuit and overtemperature
• Smooth dimming control even in the lowest range
• Dimming curve matched to eye sensitivity
• Digital control with DMX control devices
• Start channel easily adjustable via rotary switch
• Plastic housing construction with cable grip
Ordering Information
Product name
Item number
fd dmx 1-48e
0000 4022
Available Versions
Combinable with the following feno products
fd dmx 1-48e DMX LED dimmer
2/2 © feno GmbH / Issue: 01.10.2014
Supply voltage 10..48 V DC (SELV)
Power consumption 9,2 A max.
Control inputs 1
Control signal DMX
Operating mode Constant voltage
Outputs 1
Dimming frequency / internal
resolution
240 Hz/16 Bit
Output voltage 10..48 V DC
Output load 1 x 9 A
Outputs short circuit proof yes
Ambient temperature -20..45 °C
Dimensions (L/W/H) 167 x 42 x 31 mm
Weight 90 g
Wiring Diagram
Technical Details Standards
EN 61347-1
EN 61347-2-11
EN 61347-2-13
EN 55015
EN 61547
EN 61000-3-2
EN 61000-3-3
fd dmx 3-48e RGB DMX LED dimmer
1/2 © feno GmbH / Issue: 19.11.2014
fd dmx 1-24e
fc s.dmx 48d fc s.dmx 144d
fc dmx 512u
Digital RGB LED dimmer with three 3A constant voltage outputs for smooth control, especially
in lower dimming range.
Properties
• Robust constant voltage dimmer with high current
capacity
• Protected against short-circuit and overtemperature
• Smooth dimming control even in the lowest range
• Dimming curve matched to eye sensitivity
• Digital control with DMX control devices
• Start channel easily adjustable via rotary switch
• Plastic housing construction with cable grip
Ordering Information
Product name
Item number
fd dmx 3-48e
0000 4083
Available Versions
Combinable with the following feno products
fd dmx 3-48e RGB DMX LED dimmer
2/2 © feno GmbH / Issue: 19.11.2014
Supply voltage 10..48 V DC (SELV)
Power consumption 9,2 A max.
Control inputs 1
Control signal DMX
Operating mode Constant voltage
Outputs 3
Dimming frequency / internal
resolution
240 Hz/16 Bit
Output voltage 10..48 V DC
Output load 3 x 3 A
Outputs short circuit proof yes
Ambient temperature -20..45 °C
Dimensions (L/W/H) 167 x 42 x 31 mm
Weight 90 g
Wiring Diagram
Technical Details Standards
EN 61347-1
EN 61347-2-11
EN 61347-2-13
EN 55015
EN 61547
EN 61000-3-2
EN 61000-3-3
fd dmx 4-48 RGBW DMX LED dimmer
1/2 © feno GmbH / Issue: 18.12.2015
fc s.dmx 48d fc s.dmx 144d
fc dmx 512u
Digital RGBW LED dimmer with four 2A-constant voltage outputs for smooth control, especially
in lower dimming range.
Properties
• Robust constant voltage dimmer with high current
capacity
• Protected against short-circuit and overtemperature
• Smooth dimming control even in the lowest range
• Dimming curve matched to eye sensitivity
• Digital control with DMX control devices
• Start channel easily adjustable via rotary switch
• PCB construction for integration in lighting systems
Ordering Information
Product name
Item number
fd dmx 4-48
0000 4498
Combinable with the following feno products
fd dmx 4-48 RGBW DMX LED dimmer
2/2 © feno GmbH / Issue: 18.12.2015
Supply voltage 10..48 V DC (SELV)
Power consumption 8,2 A max.
Control inputs 1
Control signal DMX
Operating mode Constant voltage
Outputs 4
Dimming frequency / internal
resolution
240 Hz/16 bit
Output voltage 10..48 V DC
Output load 4 x 2 A
Outputs short circuit proof yes
Ambient temperature -20..45 °C
Dimensions (L/W/H) 145 x 30 x 15 mm
Weight 50 g
Wiring Diagram
Technical Details Additional Information
• Simple assembling due to premounted self-adhesive
thermoconductive tape
Standards
EN 61347-1
EN 61347-2-11
EN 61347-2-13
EN 55015
EN 61547
EN 61000-3-2
EN 61000-3-3
fd dmx 12-48d 12 channel DMX LED dimmer
1/2 © feno GmbH / Issue: 14.10.2015
fc s.dmx 48d fc s.dmx 144d
fc dmx 512u
Four-way RGB LED dimmer with separate power supply inputs and 12 x 3A constant voltage
outputs.
Properties
• Robust constant voltage dimmer with high current
capacity
• Protected against short-circuit and overtemperature
• Smooth dimming control even in the lowest range
• Dimming curve matched to eye sensitivity
• Digital control with DMX control devices
• Start channel easily adjustable via digital display
• Aluminium housing construction
• DIN rail mounting
• Low-cost DMX cabling via RJ45
Ordering Information
Product name
Item number
fd dmx 12-48d
0000 3866
Combinable with the following feno products
fd dmx 12-48d 12 channel DMX LED dimmer
2/2 © feno GmbH / Issue: 14.10.2015
Supply voltage 12..48 V DC (SELV)
Power consumption 4 x 9 A max.
Control inputs 1
Control signal DMX
Operating mode Constant voltage
Outputs 12
Dimming frequency / internal
resolution
240 Hz/16 Bit
Output load 12 x 3 A
Galvanic isolation yes
Outputs short circuit proof yes
Ambient temperature -20..45 °C
Dimensions (L/W/H) 200 x 105 x 40 mm
Weight 500 g
Wiring Diagram
Technical Details Additional Information
• In order to operate the device, at least the power
supply must be connected to Out 1
Standards
EN 61347-1
EN 61347-2-11
EN 61347-2-13
EN 55015
EN 61547
EN 61000-3-2
EN 61000-3-3
fd dmx 1-24 700 c 700mA DMX LED current dimmer
1/2 © feno GmbH / Issue: 16.06.2015
fd dmx 4-24 700 c fd dmx 3-24e 700 c
fi assist display-45 fc s.dmx 48d
fc s.dmx 144d fc dmx 512u
Digital 1-channel LED current dimmer with four 700mA-outputs. For flickerfree footage even
with HD-capable cameras.
Properties
• Current dimmer without pulse width modulation for
flickerfree footage even with HD-capable cameras
• Protected against short-circuit and overtemperature
• Dimming curve matched to eye sensitivity
• Digital control with DMX control devices
• PCB construction for integration in lighting systems
• Start channel easily adjustable via optional digital
display
Ordering Information
Product name
Item number
fd dmx 1-24 700 c
0000 3498
Available Versions
Combinable with the following feno products
fd dmx 1-24 700 c 700mA DMX LED current dimmer
2/2 © feno GmbH / Issue: 16.06.2015
Supply voltage 24 V DC (SELV)
Power consumption 2 A max.
Control inputs 1
Control signal DMX
Operating mode Current dimmer
Outputs 4
Dimming frequency / internal
resolution
12 Bit
Output voltage 10..15 V DC
Output load 4 x 700 mA
Outputs short circuit proof yes
Ambient temperature -20..45 °C
Dimensions (L/W/H) 157,5 x 47 x 15 mm
Weight 50 g
Wiring Diagram
Technical Details Additional Information
• Different supply and output voltage possible on
demand
• Additional fi assist display-45/90 can be ordered
separately
Standards
EN 61347-1
EN 61347-2-11
EN 61347-2-13
EN 55015
EN 61547
EN 61000-3-2
EN 61000-3-3
fd dmx 3-24e 700 c RGB DMX LED current dimmer
1/2 © feno GmbH / Issue: 01.02.2013
fd dmx 4-24 700 c fd dmx 1-24 700 c
fc s.dmx 48d fc s.dmx 144d
fc dmx 512u
Digital RGB LED current dimmer with three 700mA-outputs. For flickerfree footage even with
HD-capable cameras.
Properties
• Current dimmer without pulse width modulation for
flickerfree footage even with HD-capable cameras
• Protected against short-circuit and overtemperature
• 3 channels for RGB LED modules
• Dimming curve matched to eye sensitivity
• Digital control with DMX control devices
• Plastic housing construction with cable grip
• Start channel easily adjustable via rotary switch
Ordering Information
Product name
Item number
fd dmx 3-24e 700 c
0000 3373
Available Versions
Combinable with the following feno products
fd dmx 3-24e 700 c RGB DMX LED current dimmer
2/2 © feno GmbH / Issue: 01.02.2013
Supply voltage 24 V DC (SELV)
Power consumption 2,5 A max.
Control inputs 1
Control signal DMX
Operating mode Current dimmer
Outputs 3
Dimming frequency / internal
resolution
12 Bit
Output voltage 6..22 V DC
Output load 3 x 700 mA
Outputs short circuit proof yes
Ambient temperature -20..45 °C
Dimensions (L/W/H) 167 x 42 x 31 mm
Weight 90 g
Wiring Diagram
Technical Details Additional Information
• Different supply and output voltage possible on
demand
Standards
EN 61347-1
EN 61347-2-11
EN 61347-2-13
EN 55015
EN 61547
EN 61000-3-2
EN 61000-3-3
fd dmx 4-24 700 c RGBW DMX LED current dimmer
1/2 © feno GmbH / Issue: 16.06.2015
fd dmx 3-24e 700 c fd dmx 1-24 700 c
fi assist display-45 fc s.dmx 48d
fc s.dmx 144d fc dmx 512u
Digital RGBW LED current dimmer with four 700mA-outputs. For flickerfree footage even with
HD-capable cameras.
Properties
• Current dimmer without pulse width modulation for
flickerfree footage even with HD-capable cameras
• Protected against short-circuit and overtemperature
• 4 channels for RGBW LED modules
• Dimming curve matched to eye sensitivity
• Digital control with DMX control devices
• PCB construction for integration in lighting systems
• Start channel easily adjustable via optional digital
display
Ordering Information
Product name
Item number
fd dmx 4-24 700 c
0000 3235
Available Versions
Combinable with the following feno products
fd dmx 4-24 700 c RGBW DMX LED current dimmer
2/2 © feno GmbH / Issue: 16.06.2015
Supply voltage 24 V DC (SELV)
Power consumption 2 A max.
Control inputs 1
Control signal DMX
Operating mode Current dimmer
Outputs 4
Dimming frequency / internal
resolution
12 Bit
Output voltage 10..15 V DC
Output load 4 x 700 mA
Outputs short circuit proof yes
Ambient temperature -20..45 °C
Dimensions (L/W/H) 157,5 x 47 x 15 mm
Weight 50 g
Wiring Diagram
Technical Details Additional Information
• Different supply and output voltage possible on
demand
• Additional fi assist display-45/90 can be ordered
separately
Standards
EN 61347-1
EN 61347-2-11
EN 61347-2-13
EN 55015
EN 61547
EN 61000-3-2
EN 61000-3-3
fd mains 1e 500 LED supply/phase dimmable
1/2 © feno GmbH / Issue: 30.03.2012
fe spot 1610 w fe spot 1620 w
fe spot 1630 w
LED controller for AC voltage with a 500mA constant current output for smooth dimming
control especially in the lower dimming range.
Properties
• Robust constant voltage dimmer for LED modules
without own current limiter
• Protected against short-circuit and overtemperature
• Smooth dimming control even in the lowest range
• Dimming curve matched to eye sensitivity
• Dimmable with leading edge and trailing edge
dimmers
• Plastic housing construction with cable grip
Ordering Information
Product name
Item number
fd mains 1e 500
0000 2271
Combinable with the following feno products
fd mains 1e 500 LED supply/phase dimmable
2/2 © feno GmbH / Issue: 30.03.2012
Supply voltage 230 V, 50/60 Hz
Power consumption 0,2 A max.
Control inputs 1
Control signal Dimmed phase
Operating mode Constant current
Outputs 1
Dimming frequency / internal
resolution
240 Hz/16 Bit
Output voltage 28 V DC max.
Output load 1 x 500 mA
Galvanic isolation yes
Outputs short circuit proof yes
Ambient temperature -20..45 °C
Dimensions (L/W/H) 167 x 42 x 31 mm
Weight 90 g
Wiring Diagram
Technical Details