Fci Connector Catalog

FFC / FPC / CICConnectors

September 2001

Exit Introduction Contents catalogue

Technical Support / Drawings / Specifications : www.fciconnect.com

2 The most flexible solution

FFC / FPC / CIC Connectors

Introduction

FCI, Framatome Connectors International, is the world’s second largest manufacturer of connectors and the only European company amongst the top ten.

FCI is operating more than 60 production plants in 29 countries, and has its headquarters inParis, France. FCI employs more than 21,000 people in Europe, Asia and the Americas.

FCI’s global product range is wider than most of its competitors. Combining the strengths ofits operating subsidiaries, FCI occupies a leadership position in the communications, data, consumer, industrial & instrumentation, military and aerospace, energy and automotive mar-kets.

Its expertise in interconnection technologies, its industrial competence, a continuous invest-ment in R&D together with a coordinated global sales and distribution network makes FCI thefirst choice as a partner for every type of industry.

H

CICFFCFPC

1

2 3

Cable lock

Upside contact

Downside contact

Tin Alloy plating

Contact pressure

Conductor

Contact

Gas tight high pressure contact area

Tin or solder plating

ContactsConnector

Cable

Circuitry and cableFlexible Printed Circuit (FPC)Flexible Flat Cable (FFC)Conductive Ink Circuitry (CIC)

Cable Lock alignment systemEnsures proper alignment duringmating and prevents unintentionalcable release

Low profile body heightsPermit low PCB clearance

Gas Tight High pressure (GTH)contact systemProvides highly-reliable contactperformance

Upper or lowercontact orientationProvides design flexibility

Low Insertion Force (LIF)Special contact arrangementprovides reliable and easymating operation

Zero Insertion Force (ZIF) Allows easy cable insertion(cable is pre-held by slider)for a reliable connection

Embossed Tape-and-ReelpackagingSupports automated PCBassembly process

Selection Innovation Reliability Economy

Exit Contents Series at a glance

3

Technical Support / Drawings / Specifications / www.fciconnect.com

The most flexible solution

Contents


0.30 mm spacing page

62789 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

0.50 mm spacing

62674 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .862684 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10SFV Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

1.00 mm spacing

SFW Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14HFW Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16SLW Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18HLW Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

2.54 mm spacing

DUFLEX Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22CLINCHER Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

GENERAL

Product chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5Circuitry lay-outs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-31Performance characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32Series at a glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Exit Introduction Series at a glance FCI Offices


6

62789 series - ZIF / SMT


Available in 27, 33, 39, 45, 51, 57 positions Right angle Excellent cable retention with

small size slider

Features

Benefits

0.30 mm Spacing for FPC

Low profile of 2.00 mm Flip-Top cover rotates back 100 degrees for easy cable positioning. Staggered PCB layout enables space savings and easy soldering. The Zero Insertion Force (ZIF) connection allows an increased number

of mating cycles with minimal wear. The ZIF pre-holding process provides a stable and reliable mating operation.

Technical Data

MaterialHousing : Thermoplastic Resin, White

Slider : Thermoplastic Resin, Black

Contact : Phosphor Bronze, Tin alloy plated

PC Board pattern (component side)

DimensionsB = 0.30 x total number of positions - 0.30C = 0.30 x total number of positions - 0.90

Exit Contents More

7

Dimensions in mmTechnical Support / Drawings / Specifications / www.fciconnect.com




Number of contacts 27, 33, 39, 45, 51, 57(for other number of positions, please contact FCI)

Ordering Data

Series 62789 - Positions 1100

Dimensions

Circuitry Type For Recommended Circuitry type see page 27

Packaging Tape and reel : 3000 pcs.

DimensionsA = 0.30 x total number of positions + 2.10B = 0.30 x total number of positions - 0.30C = 0.30 x total number of positions - 0.90

Exit Contents Back Next


8



Features

Benefits

0.50 mm Spacing for FFC / FPC

Available in 12, 20, 24, 25, 30 positions Vertical Excellent cable retention with

small size slider Cable lock option

The Gas-Tight, High pressure (GTH) contact system ensures a low cost connection with reliability equal to gold plating.

The Zero Insertion Force (ZIF) connection allows an increased number of mating cycles with minimal wear.

The ZIF pre-holding process provides a stable and reliable mating operation. The slider ensures maximum cable retention with a minimum size. Fork shaped contacts mean stable and low contact resistance. The cable lock option provides cable strain relief as well as full retention of cable.

Technical Data

MaterialHousing : Resin, glass reinforced, UL94V-0, Black

Slider : Resin, glass reinforced, UL94V-0, Brown

(with cable-lock : Black)



DimensionsC = 0.50 x total number of positions - 0.50

Exit Contents More

9




0.50 mm Spacing for FFC / FPCOrdering Data

Dimensions


Series 62674 - Positions 11 2 1

Number of contacts 12, 20, 24, 25, 30(for other number of positions, please contact FCI)

Cable lock 2 = without cable lock3 = with cable lock


without cable lock with cable lock

DimensionsA = 0.50 x total number of positions + 4.50 ±0.20B = 0.50 x total number of positions + 3.90 ±0.20C = 0.50 x total number of positions - 0.50 ±0.10 D (with cable lock) = 0.50 x total number of positions - 0.40 ±0.10D (without cable lock) = 0.50 x total number of positions + 0.70±0.10

Exit Contents Next Back


10



Features

Benefits

0.50 mm Spacing for FPC / FPC

Available in 32, 34, 40, 45, 50 positions Right angle Excellent cable retention with

small size slider



The ZIF pre-holding process provides a stable and reliable mating operation. The slider ensures maximum cable retention with a minimum size. Fork shaped contacts mean stable and low contact resistance.

Technical Data

MaterialHousing : Glass filled thermoplastic, UL94V-0, Beige

Slider : Glass filled thermoplastic, UL94V-0, Black



Exit Contents More

11




0.50 mm Spacing for FPC / FPCOrdering Data

Dimensions




Terminal type 1 = downside contact2 = upside contact


DimensionsA = 0.50 x total number of positions - 0.50 B = 0.50 x total number of positions + 0.65C = 0.50 x total number of positions + 4.30 D = 0.50 x total number of positions + 5.50

upside contact downside contact



12

SFV series - ZIF / SMT


Features

Benefits


Available in 4 to 35 positions Right angle Cable lock option Top and bottom contacts Excellent cable retention with

small size slider



The ZIF pre-holding process provides a stable and reliable mating operation. The slider ensures maximum cable retention with a minimum size. The cable lock option provides cable strain relief as well as full retention of cable. Fork shaped contacts mean stable and low contact resistance. Product variations cover a broad range of applications.

Technical Data

MaterialHousing : Polyamide Resin, glass reinforced, UL94V-0,Black

Slider : PPS Resin, glass reinforced, UL94V-0, Brown




Exit Contents More

13





Dimensions

Circuitry Type For Recommended Circuitry type see page 28 and 29

Number of contacts 4 to 35

Terminal type R = side entry

Cable type 1 = FPC/FFC downside contact2 = FPC/FFC upside contact3 = FPC (with cable-lock) downside contact4 = FPC (with cable-lock) upside contact

Series SFV 20 R - 1 ST E1

Packaging E1 = tape-and-reel :3000 pcs.E3 = tape-and-reel :200 pcs.

PCB mounting ST = SMT type

0,5 x total no. of pos +5.5 +_0.20

0,5 x total no. of pos +5.5 +_0.20

0,5 x total no. of pos +3.9 +_0.20

0,5 x total no. of pos +0.7 +_0.10

0,5 x total no. of pos -0.4 +_0.10

0,5 x total no. of pos -0.5

0,5 x total no. of pos +5.5 +_0.20

0,5 x total no. of pos +5.5 +_0.20

0,5 x total no. of pos +3.9 +_0.20

0,5 x total no. of pos +0.7 +_0.10

0,5 x total no. of pos -0.4 +_0.10


without cable lock

with cable lock

downside contact upside contact

without cable lock

with cable lock



14

SFW series - ZIF / SMT


Features

Benefits

1.00 mm Spacing for FFC / FPC / CIC

Available in 4 to 30 positions (right angle) and 4 to 32 positions (straight)

Top and Bbottom contacts Cable lock option Optional mounting devices ( straight) Excellent cable retention with

small size slider



The ZIF pre-holding process provides a stable and reliable mating operation. The slider ensures maximum cable retention with a minimum size. The cable lock option provides cable strain relief as well as full retention of cable. Fork shaped contacts mean stable and low contact resistance. Product variations cover a broad range of application. Optional mounting devices provide PCB hold-down and strain relief for SMT tails,

highly desirable for lower positions.

Technical Data

MaterialHousing :

For Right angle version:

PPS, glass reinforced, UL94V-0

For FPC / FCC :

housing color: Brown (with cable-lock: Black)

slider color : Black (with cable-lock: Brown)

For CIC :



For Vertical version:

Heat-resisting Resin, glass reinforced, UL94V-0

housing color: Brown; slider color : Black



Straight Right angle

Exit Contents More

PackagingRight angle E1 = tape-and-reel 2000 pcs

E3 = tape-and-reel 200 pcsStraight E1 = tape-and-reel 1000 pcs

PCB mountingST = SMT typeSTM = SMT with mounting device (top entry only)

15




1.00 mm Spacing for FFC / FPC / CICOrdering Data

Dimensions



Terminal type R = Right angleS = Straight

Cable type 1 = FPC/FFC downside contact2 = FPC/FFC upside contact3 = FPC (with cable-lock) downside contact4 = FPC (with cable-lock) upside contact(cable types 1, 3, 4, 5, 7, 8 for side entry only)

Series SFW 20 R - 1 ST E1

5 = CIC downside contact6 = CIC upside contact7 = CIC (with cable-lock) downside contact8 = CIC (with cable-lock) upside contact

1 x total no. of pos +5.8 +_0.20


1 x total no. of pos -1.0 +_0.20


1 x total no. of pos -1.24 +_0.20


1 x total no. of pos +1.3 +_0.10 1 x total no. of pos +1.3 +_0.10

1 x total no. of pos -0.08 +_0.10 1 x total no. of pos -0.08 +_0.10





without cable lock


without cable lock

with cable lock with cable lock

Right angle Straight



16

HFW series - LIF / SMT


Features

Benefits


Available in 4 to 30 positions (right angle) and 4 to 33 positions ( straight)

Top and bottom contacts Optional mounting devices ( straight)


The Low Insertion Force (LIF) contacts positioning provides a reliable and easy mating operation.

Fork shaped contacts mean stable and low contact resistance. Optional mounting devices provide PCB hold-down and strain relief for SMT tails,


Technical Data

MaterialHousing :

Polyamide 6T,

glass reinforced, UL94V-0, Black

Contact :

Phosphor Bronze, Tin alloy plated



Exit Contents More

Packaging Right angle E1 = tape-and-reel 2000 pcs E3 = tape-and-reel 200 pcs

Straight E1 = tape-and-reel 1000 pcs


17





Dimensions


No of contacts 4 to 33 (Straight)4 to 30 (Right angle)


Cable type 2 = FPC/FFC (Straight) 6 = CIC (Straight)1 = FPC/FFC downside contact (Right angle)2 = FPC/FFC upside contact (Right angle)

Series HFW 20 R - 1 ST E1


1 x total no. of pos +1.14 +_0.20

1 x total no. of pos +1.14 +_0.20


1 x total no. of pos -1,0 +_0.20







Features

Benefits


Available in 4 to 30 positions Right angle or vertical type Excellent cable retention with

small size slider Kinked solder tails available


The Zero Insertion Force connection allows an increased number of mating cycles with minimal wear.

The ZIF pre-holding process provides a stable and reliable mating operation. The slider ensures maximum cable retention with a minimum size. Fork shaped contacts mean stable and low contact resistance. Kinked solder tails provide added PCB retention. Product variations cover a broad range of applications.

Technical Data

MaterialHousing :

Nylon, glass reinforced, UL94V-0, Black

Slider :


(For CIC : Milky-White)

Contact :



SLW series - ZIF / Through holeExit Contents More

19


SLW series - ZIF / Through hole



Dimensions


No of contacts 4 to 30


Cable type 1 = FPC/FFC 5 = CIC

Series SLW 25 S - 1 C7

Variation C7 = for 0.8 mm dia. through-hole

1 x total no. of pos +6.2 +_0.301 x total no. of pos +6.2 +_0.30



Tray packaging




20

HLW series - LIF / Through hole


Features

Benefits


Available in 4 to 32 positions Right angle and vertical type Kinked solder tails available



Fork shaped contacts mean stable and low contact resistance. Kinked solder tails provide added PCB retention.

Technical Data

MaterialHousing : PBT, glass reinforced, UL94V-0, Black



Exit Contents More

21





Dimensions





Series HLW 10 R - 2 C 7

Variation A7 = non-kinked terminalC7 = kinked terminal


1 x total no. of pos +1.12 +_0.10



1 x total no. of pos +1.12 +_0.10


Tray packaging


non-kinked terminalkinked terminal kinked terminal non-kinked terminal



22

DUFLEX series


Features

Benefits


Available in 2 to 36 positions per row Single or double row Gold or tin plated option Gas tight Highly reliable Insulation Displacement

Contact (IDC) termination technique Low-cost connection system Versatility Long-life contacts Mates with 0.62 mm square or round

pins as short as 5 mm Dedicated application equipment

Ideal for large-volume users. Mass-termination reduces overall applied costs and time. Contacts fitting all housing styles ensures versatility and minimizes stock values.

Technical Data

MaterialHousing : Thermoplastic Polyester, glass reinforced, UL94V-0, Blue

Contact : Phosphor Bronze, Gold-duplex or Tin alloy plated

Cable specification

Specification: IPC Standard FC-220C. Cables type A or BThickness: 0.305 ±0.025 mm(0.012±0.0001 inch) incl. insulationInsulation material: Mylar, Kapton or Nomex (polyester/polyamide)Conductor Thickness: 0.076 ±0.013 mm (0.003±0.0005 inch), 305 gr/m2

0.127 ±0.013 mm (0.005±0.0005 inch), 610 gr/m2

Conductor width: 1.57 ± 0.07 mm (0.062±0.003 inch)Conductor pitch: 2.54 ±0.05 mm (0.100±0.002 inch)Thickness for non standard cable: 0.11 - 0.35 mm (0.004 - 0.013 inch)Mating pin: 0.64 mm square (0.025 inch), min. 5.00 mm(0.196 inch) length

Cable specification and application data sheet TA 338 and TA 333 on request

Exit Contents More

23


DUFLEX series



Dimensions

67013 = single row housing 66987 = double row housing

Housing 5 digit partnumber - 0 02

Number of contacts per row = 02 to 36

Plating 3 = 0.75µm gold contact area, tin-lead cable area, 0.30N min./0.60N max. insertion force 4 = 5.00µm tin-lead contact area, tin-lead cable area, 0.30N min./0.60N max. insertion force

Contact 76785 - 3 01 Packaging 01 = 15000 per cardboard reel 11 = 3000 per cardboard reel

Contact

Housing Single row Double row



24

CLINCHER series


Features

Benefits


Available in 2 to 32 positions Gas-Tight, High pressure (GTH) Gold and tin plated option Pre-assembled Snap-shut Long-life contacts Mates with 0.62 mm square or round

pins Dedicated application equipment

Pre-assembled connectors reduce overall applied costs and ensure full contact protection.

Snap-shut allows a single connection operation and therefore increases assembly speed.

Technical Data

MaterialHousing : Polypropylene, glass reinforced, UL94V-0, Blue

Contact : brass, Gold or Tin alloy plated

Cable specification


0.127 ±0.013 mm (0.005±0.0005 inch), 610 gr/m2


Cable specification and application data sheet TA 264, TA 371 and TA 372 on request

Exit Contents More

25


CLINCHER series



Dimensions

65801 = receptacle assembly 66226 = pin assembly

Series 5 digit partnumber - 0 02

Number of positions see table

Receptacle assembly Pin assembly

0 = standard version1 = for Thin film circuits ( 0.15 mm max. thickness) Female Receptacle only

Gold platedcode positions

63 = 2 pos.62 = 3 pos.33 = 4 pos.34 = 5 pos.35 = 6 pos.36 = 7 pos.37 = 8 pos.38 = 9 pos.39 = 10 pos.40 = 11 pos.41 = 12 pos.42 = 13 pos.43 = 14 pos.44 = 15 pos.45 = 16 pos.46 = 17 pos.47 = 18 pos.48 = 19 pos.49 = 20 pos.50 = 21 pos.51 = 22 pos.52 = 23 pos.53 = 24 pos.54 = 25 pos.55 = 26 pos.56 = 27 pos.57 = 28 pos.58 = 29 pos.59 = 30 pos.60 = 31 pos.61 = 32 pos.66 = 34 pos.

Tin platedcode positions



34 = 2 pos.35 = 3 pos.36 = 4 pos.37 = 5 pos.38 = 6 pos.39 = 7 pos.40 = 8 pos.41 = 9 pos.42 = 10 pos.43 = 11 pos.44 = 12 pos.45 = 13 pos.46 = 14 pos.47 = 15 pos.48 = 16 pos.49 = 17 pos.50 = 18 pos.51 = 19 pos.52 = 20 pos.53 = 21 pos.54 = 22 pos.55 = 23 pos.56 = 24 pos.57 = 25 pos.58 = 26 pos.59 = 27 pos.60 = 28 pos.61 = 29 pos.62 = 30 pos.63 = 31 pos.64 = 32 pos.




Technical Support / Drawings / Specifications: www.fciconnect.com


Circuitry lay-outs

Bill of Material

Flexible Printed Circuit (FPC)

Number Description Material

1 Base Film Polyamide or Polyester or Equivalent

2 Conductor Copper Foil (Solder Plated 1 µm min.)

3 Overlay Polyamide or Polyester or Equivalent

4 Supporting Tape Polyamide or Polyester or Equivalent

Flexible Flexible Cable (FFC)


1 Insulation Flame Resistant Polyester or Equivalent

2 Conductor Copper Foil (Tin or Solder Plated 1 µm min.)

3 Supporting Tape Flame Resistant Polyester or Equivalent

Conductive Ink Circuit (CIC)


1 Base Film Polyester or Equivalent

2 Conductor Carbon Paste over Silver Paste



GeneralExit Contents Next

27

Dimensions in mmTechnical Support / Drawings / Specifications: www.fciconnect.com


Circuitry lay-outs

no.of pos.

FPC for 62789 Series FPC for 62674 Series

FPC cable lock for 62674 Series FFC for 62674 Series

General

= for circled number description, please see page 26


28



Circuitry lay-outs

FFC for 62684 Series FPC for 62684 Series

FFC for SFV Series FPC for SFV Series

General



29



Circuitry lay-outs

FFC for SFW Series

FFC cable lock for SFW Series FPC for SFW Series

General

FPC cable lock for SFV Series



30



Circuitry lay-outs

FFC for HFW straight Series

FPC for HFW straight Series FPC for HFW RA Series

General

FPC cable lock for SFW Series



31

FFC for SLW Series



Circuitry lay-outs

FPC for SLW Series

FFC for HLW Series FPC for HLW Series

General



32



General

Performance characteristics

Spacing 0.30 mm 0.50 mm 1.00 mm 2.54 mm

Circuitry FPC FFC / FPC FFC / FPC / CIC

Series 62789 62674 62684 SFV SFW HFW SLW HLW DUFLEX CLINCHER

Electrical

Current Rating 0.5A 0.5A 1A 2A

Rated Voltage (AC/DC) 50V 50V 100V 500V

Contact Resistance (initial) 30mΩ max. 30mΩ max. 30mΩ max. 30mΩ max.

Insulation Resistance 100MΩ min. 100MΩ min. 500MΩ min. 5000MΩ min.

Dielectic withstanding Voltage AC 200VAC 200V AC 500V AC 1000V

Mechanical

Durability Contact resistance : 50mΩ max.

Cycle 20 20 20 30 20 30 30

Vibration per JIS C 0040 No discontinuity greater than 1µ second

Environmental

Salt Spray per JIS C 0023 Contact Resistance 50mΩ max.

Damp Heat per JIS C 0022 Contact Resistance 50mΩ max.

(steady state) Insulation Resistance 100mΩ min.

Change of Temperature per JIS C 0025 Contact Resistance 50mΩ max.

Operating temperature Range -55°C to +85°C


33



Series at a glance

General

Series Pitch Cable Type ZIF / LIF Soldering Number of Positions

62789 0.30 mm FPC ZIF SMT 27,33,39,45,51,57

62674 0.50 mm FFC/FPC ZIF SMT 12,20,24,25,30

62684 0.50 mm FFC/FPC ZIF SMT 32,34,40,45,50

SFV 0.50 mm FFC/FPC ZIF SMT 4 to 35

SFR 0.80 mm FFC/FPC/CIC ZIF SMT 4 to 30

HFR 0.80 mm FFC/FPC/CIC LIF SMT 4 to 30

SFW 1.00 mm FFC/FPC/CIC ZIF SMT 4 to 30

HFW 1.00 mm FFC/FPC/CIC LIF SMT 4 to 30

SLW 1.00 mm FFC/FPC/CIC ZIF DIP 4 to 30

HLW 1.00 mm FFC/FPC/CIC LIF DIP 4 to 32

SFD 1.25 mm FFC/FPC/CIC ZIF SMT 4,6,21,26

SLD 1.25 mm FFC/FPC/CIC ZIF DIP 4 to 40

SLP 1.25 mm FFC/FPC/CIC ZIF DIP 4 to 20

SLEM 1.25 mm FFC/FPC ZIF DIP 4 to 30

HLEM 1.25 mm FFC/FPC/CIC LIF DIP 3 to 40

Clincher 2.54 mm FFC/FPC/CIC - - 2 to 32

Duflex 2.54 mm FFC/FPC/CIC - - 2 to 72


NL

FFC

FP

C 0

9 01

E©

Cop

yrig

ht F

ram

atom

eCon

nect

ors

Inte

rnat

iona

l, S

.A.

All

right

s re

serv

ed.

BELGIUMFCI Belgium48 A rue StroobantsB-1140 BrusselsTel.: +32 – 2 247 99 00Fax: +32 – 2 247 99 99E-mail: [email protected]

FRANCEFCI France145 rue Yves le Coz78035 VERSAILLES CedexTel.: +33 – 1 39 49 21 83Fax: +33 – 1 39 49 20 00E-mail: [email protected]

GERMANYFCI Deutschland GmbHAm Kronberger Hang 565824 SchwalbachGermanyTel: +49 – 6196 9520 0Fax: +49 – 6196 9520 111E-mail: [email protected]

GREAT BRITAINFramatome Connectors UKConnector HouseEyncourt Road – Woodside EstateDUNSTABLE Beds. LU5 4TSTel.: +44 – 1 582 814 800Fax: +44 – 1 582 814 814E-mail: [email protected]

ITALYFramatome Connectors ItaliaStrada del Francese 13710156 TORINOTel.: +39 – 011 451 9611Fax: +39 – 011 470 2266E-mail: [email protected]

NETHERLANDSFCI NederlandEssebaan 72908 LJ CAPELLE A/D IJSSELTel.: +31 – 10 264 3333Fax: +31 – 10 264 3399E-mail:[email protected]

SPAINFCI Connectors EspañaPoligono Industrial08781 St. Esteve SesroviresTel.: +34 – 93 771 4012Fax: +34 – 93 771 3197E-mail: [email protected]

SWEDENFCI Connectors SwedenSjöviksbacken 12Box 47084 100 74 StockholmTel.: +46 – 8 685 5300Fax: +46 – 8 685 5355E-mail: [email protected]

SWITZERLANDFCI SchweizSihlbruggstrasse 1446340 BAARTel.: +41 – 41 760 1434Fax: +41 – 41 761 0647

Europe:

FCI USA825 Old Trail RoadEtters, Pennsylvania 17319Tel. : 1-800 237 2374Fax : 1-717 938 7604E-mail : [email protected]

Americas:

www.fciconnect.com

Exit Contents

mailto:[email protected]









http://www.fciconnect.com

© C

opyr

ight

200

0 Fr

amat

ome

Con

nect

ors

Inte

rnat

iona

l, S

.A. A

ll rig

hts

rese

rved

.

U.S.A. Tel.: (800) 237-2374; 717-938-7200Canada Tel.: 905-826-9810

Europe Tel.: 33-1-39-49-21-83Asia/Pacific Tel.: 65-549-6666

http://www.fciconnect.com950567-004 08/01

FFC / FPC / CICConnectors

September 2001

Exit Introduction Contents catalogue




Introduction

FCI, Framatome Connectors International, is the world’s second largest manufacturer of connectors and the only European company amongst the top ten.

FCI is operating more than 60 production plants in 29 countries, and has its headquarters inParis, France. FCI employs more than 21,000 people in Europe, Asia and the Americas.

FCI’s global product range is wider than most of its competitors. Combining the strengths ofits operating subsidiaries, FCI occupies a leadership position in the communications, data, consumer, industrial & instrumentation, military and aerospace, energy and automotive mar-kets.

Its expertise in interconnection technologies, its industrial competence, a continuous invest-ment in R&D together with a coordinated global sales and distribution network makes FCI thefirst choice as a partner for every type of industry.

H

CICFFCFPC

1

2 3

Cable lock

Upside contact

Downside contact

Tin Alloy plating

Contact pressure

Conductor

Contact

Gas tight high pressure contact area

Tin or solder plating

ContactsConnector

Cable

Circuitry and cableFlexible Printed Circuit (FPC)Flexible Flat Cable (FFC)Conductive Ink Circuitry (CIC)

Cable Lock alignment systemEnsures proper alignment duringmating and prevents unintentionalcable release

Low profile body heightsPermit low PCB clearance

Gas Tight High pressure (GTH)contact systemProvides highly-reliable contactperformance

Upper or lowercontact orientationProvides design flexibility

Low Insertion Force (LIF)Special contact arrangementprovides reliable and easymating operation

Zero Insertion Force (ZIF) Allows easy cable insertion(cable is pre-held by slider)for a reliable connection

Embossed Tape-and-ReelpackagingSupports automated PCBassembly process

Selection Innovation Reliability Economy

Exit Contents Series at a glance

3

Technical Support / Drawings / Specifications / www.fciconnect.com


Contents


0.30 mm spacing page

62789 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

0.50 mm spacing

62674 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .862684 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10SFV Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

1.00 mm spacing

SFW Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14HFW Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16SLW Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18HLW Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

2.54 mm spacing

DUFLEX Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22CLINCHER Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

GENERAL

Product chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5Circuitry lay-outs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-31Performance characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32Series at a glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Exit Introduction Series at a glance FCI Offices


6



Available in 27, 33, 39, 45, 51, 57 positions Right angle Excellent cable retention with

small size slider

Features

Benefits


Low profile of 2.00 mm Flip-Top cover rotates back 100 degrees for easy cable positioning. Staggered PCB layout enables space savings and easy soldering. The Zero Insertion Force (ZIF) connection allows an increased number

of mating cycles with minimal wear. The ZIF pre-holding process provides a stable and reliable mating operation.

Technical Data

MaterialHousing : Thermoplastic Resin, White

Slider : Thermoplastic Resin, Black



DimensionsB = 0.30 x total number of positions - 0.30C = 0.30 x total number of positions - 0.90

Exit Contents More

7





Number of contacts 27, 33, 39, 45, 51, 57(for other number of positions, please contact FCI)

Ordering Data

Series 62789 - Positions 1100

Dimensions



DimensionsA = 0.30 x total number of positions + 2.10B = 0.30 x total number of positions - 0.30C = 0.30 x total number of positions - 0.90

Exit Contents Back Next


8



Features

Benefits


Available in 12, 20, 24, 25, 30 positions Vertical Excellent cable retention with

small size slider Cable lock option



The ZIF pre-holding process provides a stable and reliable mating operation. The slider ensures maximum cable retention with a minimum size. Fork shaped contacts mean stable and low contact resistance. The cable lock option provides cable strain relief as well as full retention of cable.

Technical Data

MaterialHousing : Resin, glass reinforced, UL94V-0, Black

Slider : Resin, glass reinforced, UL94V-0, Brown




DimensionsC = 0.50 x total number of positions - 0.50

Exit Contents More

9





Dimensions




Cable lock 2 = without cable lock3 = with cable lock


without cable lock with cable lock

DimensionsA = 0.50 x total number of positions + 4.50 ±0.20B = 0.50 x total number of positions + 3.90 ±0.20C = 0.50 x total number of positions - 0.50 ±0.10 D (with cable lock) = 0.50 x total number of positions - 0.40 ±0.10D (without cable lock) = 0.50 x total number of positions + 0.70±0.10



10



Features

Benefits

0.50 mm Spacing for FPC / FPC

Available in 32, 34, 40, 45, 50 positions Right angle Excellent cable retention with

small size slider



The ZIF pre-holding process provides a stable and reliable mating operation. The slider ensures maximum cable retention with a minimum size. Fork shaped contacts mean stable and low contact resistance.

Technical Data

MaterialHousing : Glass filled thermoplastic, UL94V-0, Beige

Slider : Glass filled thermoplastic, UL94V-0, Black



Exit Contents More

11




0.50 mm Spacing for FPC / FPCOrdering Data

Dimensions




Terminal type 1 = downside contact2 = upside contact


DimensionsA = 0.50 x total number of positions - 0.50 B = 0.50 x total number of positions + 0.65C = 0.50 x total number of positions + 4.30 D = 0.50 x total number of positions + 5.50

upside contact downside contact



12



Features

Benefits


Available in 4 to 35 positions Right angle Cable lock option Top and bottom contacts Excellent cable retention with

small size slider



The ZIF pre-holding process provides a stable and reliable mating operation. The slider ensures maximum cable retention with a minimum size. The cable lock option provides cable strain relief as well as full retention of cable. Fork shaped contacts mean stable and low contact resistance. Product variations cover a broad range of applications.

Technical Data

MaterialHousing : Polyamide Resin, glass reinforced, UL94V-0,Black

Slider : PPS Resin, glass reinforced, UL94V-0, Brown




Exit Contents More

13





Dimensions



Terminal type R = side entry

Cable type 1 = FPC/FFC downside contact2 = FPC/FFC upside contact3 = FPC (with cable-lock) downside contact4 = FPC (with cable-lock) upside contact

Series SFV 20 R - 1 ST E1

Packaging E1 = tape-and-reel :3000 pcs.E3 = tape-and-reel :200 pcs.


0,5 x total no. of pos +5.5 +_0.20

0,5 x total no. of pos +5.5 +_0.20

0,5 x total no. of pos +3.9 +_0.20

0,5 x total no. of pos +0.7 +_0.10

0,5 x total no. of pos -0.4 +_0.10


0,5 x total no. of pos +5.5 +_0.20

0,5 x total no. of pos +5.5 +_0.20

0,5 x total no. of pos +3.9 +_0.20

0,5 x total no. of pos +0.7 +_0.10

0,5 x total no. of pos -0.4 +_0.10


without cable lock

with cable lock


without cable lock

with cable lock



14



Features

Benefits


Available in 4 to 30 positions (right angle) and 4 to 32 positions (straight)

Top and Bbottom contacts Cable lock option Optional mounting devices ( straight) Excellent cable retention with

small size slider



The ZIF pre-holding process provides a stable and reliable mating operation. The slider ensures maximum cable retention with a minimum size. The cable lock option provides cable strain relief as well as full retention of cable. Fork shaped contacts mean stable and low contact resistance. Product variations cover a broad range of application. Optional mounting devices provide PCB hold-down and strain relief for SMT tails,


Technical Data

MaterialHousing :

For Right angle version:

PPS, glass reinforced, UL94V-0

For FPC / FCC :



For CIC :



For Vertical version:

Heat-resisting Resin, glass reinforced, UL94V-0

housing color: Brown; slider color : Black




Exit Contents More

PackagingRight angle E1 = tape-and-reel 2000 pcs

E3 = tape-and-reel 200 pcsStraight E1 = tape-and-reel 1000 pcs

PCB mountingST = SMT typeSTM = SMT with mounting device (top entry only)

15





Dimensions




Cable type 1 = FPC/FFC downside contact2 = FPC/FFC upside contact3 = FPC (with cable-lock) downside contact4 = FPC (with cable-lock) upside contact(cable types 1, 3, 4, 5, 7, 8 for side entry only)

Series SFW 20 R - 1 ST E1

5 = CIC downside contact6 = CIC upside contact7 = CIC (with cable-lock) downside contact8 = CIC (with cable-lock) upside contact





1 x total no. of pos -1.24 +_0.20



1 x total no. of pos -0.08 +_0.10 1 x total no. of pos -0.08 +_0.10





without cable lock


without cable lock

with cable lock with cable lock




16



Features

Benefits


Available in 4 to 30 positions (right angle) and 4 to 33 positions ( straight)

Top and bottom contacts Optional mounting devices ( straight)



Fork shaped contacts mean stable and low contact resistance. Optional mounting devices provide PCB hold-down and strain relief for SMT tails,


Technical Data

MaterialHousing :

Polyamide 6T,

glass reinforced, UL94V-0, Black

Contact :




Exit Contents More

Packaging Right angle E1 = tape-and-reel 2000 pcs E3 = tape-and-reel 200 pcs

Straight E1 = tape-and-reel 1000 pcs


17





Dimensions


No of contacts 4 to 33 (Straight)4 to 30 (Right angle)


Cable type 2 = FPC/FFC (Straight) 6 = CIC (Straight)1 = FPC/FFC downside contact (Right angle)2 = FPC/FFC upside contact (Right angle)

Series HFW 20 R - 1 ST E1


1 x total no. of pos +1.14 +_0.20

1 x total no. of pos +1.14 +_0.20









Features

Benefits


Available in 4 to 30 positions Right angle or vertical type Excellent cable retention with

small size slider Kinked solder tails available


The Zero Insertion Force connection allows an increased number of mating cycles with minimal wear.

The ZIF pre-holding process provides a stable and reliable mating operation. The slider ensures maximum cable retention with a minimum size. Fork shaped contacts mean stable and low contact resistance. Kinked solder tails provide added PCB retention. Product variations cover a broad range of applications.

Technical Data

MaterialHousing :


Slider :


(For CIC : Milky-White)

Contact :



SLW series - ZIF / Through holeExit Contents More

19


SLW series - ZIF / Through hole



Dimensions





Series SLW 25 S - 1 C7

Variation C7 = for 0.8 mm dia. through-hole

1 x total no. of pos +6.2 +_0.301 x total no. of pos +6.2 +_0.30



Tray packaging




20



Features

Benefits


Available in 4 to 32 positions Right angle and vertical type Kinked solder tails available



Fork shaped contacts mean stable and low contact resistance. Kinked solder tails provide added PCB retention.

Technical Data

MaterialHousing : PBT, glass reinforced, UL94V-0, Black



Exit Contents More

21





Dimensions





Series HLW 10 R - 2 C 7

Variation A7 = non-kinked terminalC7 = kinked terminal


1 x total no. of pos +1.12 +_0.10



1 x total no. of pos +1.12 +_0.10


Tray packaging


non-kinked terminalkinked terminal kinked terminal non-kinked terminal



22

DUFLEX series


Features

Benefits


Available in 2 to 36 positions per row Single or double row Gold or tin plated option Gas tight Highly reliable Insulation Displacement

Contact (IDC) termination technique Low-cost connection system Versatility Long-life contacts Mates with 0.62 mm square or round

pins as short as 5 mm Dedicated application equipment

Ideal for large-volume users. Mass-termination reduces overall applied costs and time. Contacts fitting all housing styles ensures versatility and minimizes stock values.

Technical Data

MaterialHousing : Thermoplastic Polyester, glass reinforced, UL94V-0, Blue

Contact : Phosphor Bronze, Gold-duplex or Tin alloy plated

Cable specification


0.127 ±0.013 mm (0.005±0.0005 inch), 610 gr/m2


Cable specification and application data sheet TA 338 and TA 333 on request

Exit Contents More

23


DUFLEX series



Dimensions

67013 = single row housing 66987 = double row housing

Housing 5 digit partnumber - 0 02

Number of contacts per row = 02 to 36

Plating 3 = 0.75µm gold contact area, tin-lead cable area, 0.30N min./0.60N max. insertion force 4 = 5.00µm tin-lead contact area, tin-lead cable area, 0.30N min./0.60N max. insertion force

Contact 76785 - 3 01 Packaging 01 = 15000 per cardboard reel 11 = 3000 per cardboard reel

Contact

Housing Single row Double row



24

CLINCHER series


Features

Benefits


Available in 2 to 32 positions Gas-Tight, High pressure (GTH) Gold and tin plated option Pre-assembled Snap-shut Long-life contacts Mates with 0.62 mm square or round

pins Dedicated application equipment

Pre-assembled connectors reduce overall applied costs and ensure full contact protection.

Snap-shut allows a single connection operation and therefore increases assembly speed.

Technical Data

MaterialHousing : Polypropylene, glass reinforced, UL94V-0, Blue

Contact : brass, Gold or Tin alloy plated

Cable specification


0.127 ±0.013 mm (0.005±0.0005 inch), 610 gr/m2


Cable specification and application data sheet TA 264, TA 371 and TA 372 on request

Exit Contents More

25


CLINCHER series



Dimensions

65801 = receptacle assembly 66226 = pin assembly

Series 5 digit partnumber - 0 02

Number of positions see table

Receptacle assembly Pin assembly

0 = standard version1 = for Thin film circuits ( 0.15 mm max. thickness) Female Receptacle only












Circuitry lay-outs

Bill of Material

Flexible Printed Circuit (FPC)


1 Base Film Polyamide or Polyester or Equivalent

2 Conductor Copper Foil (Solder Plated 1 µm min.)



Flexible Flexible Cable (FFC)


1 Insulation Flame Resistant Polyester or Equivalent

2 Conductor Copper Foil (Tin or Solder Plated 1 µm min.)

3 Supporting Tape Flame Resistant Polyester or Equivalent

Conductive Ink Circuit (CIC)


1 Base Film Polyester or Equivalent

2 Conductor Carbon Paste over Silver Paste



GeneralExit Contents Next

27



Circuitry lay-outs

no.of pos.

FPC for 62789 Series FPC for 62674 Series

FPC cable lock for 62674 Series FFC for 62674 Series

General



28



Circuitry lay-outs

FFC for 62684 Series FPC for 62684 Series

FFC for SFV Series FPC for SFV Series

General



29



Circuitry lay-outs

FFC for SFW Series

FFC cable lock for SFW Series FPC for SFW Series

General

FPC cable lock for SFV Series



30



Circuitry lay-outs

FFC for HFW straight Series

FPC for HFW straight Series FPC for HFW RA Series

General

FPC cable lock for SFW Series



31

FFC for SLW Series



Circuitry lay-outs

FPC for SLW Series

FFC for HLW Series FPC for HLW Series

General



32



General

Performance characteristics

Spacing 0.30 mm 0.50 mm 1.00 mm 2.54 mm

Circuitry FPC FFC / FPC FFC / FPC / CIC

Series 62789 62674 62684 SFV SFW HFW SLW HLW DUFLEX CLINCHER

Electrical

Current Rating 0.5A 0.5A 1A 2A

Rated Voltage (AC/DC) 50V 50V 100V 500V

Contact Resistance (initial) 30mΩ max. 30mΩ max. 30mΩ max. 30mΩ max.

Insulation Resistance 100MΩ min. 100MΩ min. 500MΩ min. 5000MΩ min.

Dielectic withstanding Voltage AC 200VAC 200V AC 500V AC 1000V

Mechanical

Durability Contact resistance : 50mΩ max.

Cycle 20 20 20 30 20 30 30

Vibration per JIS C 0040 No discontinuity greater than 1µ second

Environmental

Salt Spray per JIS C 0023 Contact Resistance 50mΩ max.

Damp Heat per JIS C 0022 Contact Resistance 50mΩ max.

(steady state) Insulation Resistance 100mΩ min.

Change of Temperature per JIS C 0025 Contact Resistance 50mΩ max.

Operating temperature Range -55°C to +85°C


33



Series at a glance

General

Series Pitch Cable Type ZIF / LIF Soldering Number of Positions

62789 0.30 mm FPC ZIF SMT 27,33,39,45,51,57

62674 0.50 mm FFC/FPC ZIF SMT 12,20,24,25,30

62684 0.50 mm FFC/FPC ZIF SMT 32,34,40,45,50

SFV 0.50 mm FFC/FPC ZIF SMT 4 to 35

SFR 0.80 mm FFC/FPC/CIC ZIF SMT 4 to 30

HFR 0.80 mm FFC/FPC/CIC LIF SMT 4 to 30

SFW 1.00 mm FFC/FPC/CIC ZIF SMT 4 to 30

HFW 1.00 mm FFC/FPC/CIC LIF SMT 4 to 30

SLW 1.00 mm FFC/FPC/CIC ZIF DIP 4 to 30

HLW 1.00 mm FFC/FPC/CIC LIF DIP 4 to 32

SFD 1.25 mm FFC/FPC/CIC ZIF SMT 4,6,21,26

SLD 1.25 mm FFC/FPC/CIC ZIF DIP 4 to 40

SLP 1.25 mm FFC/FPC/CIC ZIF DIP 4 to 20

SLEM 1.25 mm FFC/FPC ZIF DIP 4 to 30

HLEM 1.25 mm FFC/FPC/CIC LIF DIP 3 to 40

Clincher 2.54 mm FFC/FPC/CIC - - 2 to 32

Duflex 2.54 mm FFC/FPC/CIC - - 2 to 72


NL

FFC

FP

C 0

9 01

E©

Cop

yrig

ht F

ram

atom

eCon

nect

ors

Inte

rnat

iona

l, S

.A.

All

right

s re

serv

ed.

BELGIUMFCI Belgium48 A rue StroobantsB-1140 BrusselsTel.: +32 – 2 247 99 00Fax: +32 – 2 247 99 99E-mail: [email protected]

FRANCEFCI France145 rue Yves le Coz78035 VERSAILLES CedexTel.: +33 – 1 39 49 21 83Fax: +33 – 1 39 49 20 00E-mail: [email protected]

GERMANYFCI Deutschland GmbHAm Kronberger Hang 565824 SchwalbachGermanyTel: +49 – 6196 9520 0Fax: +49 – 6196 9520 111E-mail: [email protected]

GREAT BRITAINFramatome Connectors UKConnector HouseEyncourt Road – Woodside EstateDUNSTABLE Beds. LU5 4TSTel.: +44 – 1 582 814 800Fax: +44 – 1 582 814 814E-mail: [email protected]

ITALYFramatome Connectors ItaliaStrada del Francese 13710156 TORINOTel.: +39 – 011 451 9611Fax: +39 – 011 470 2266E-mail: [email protected]

NETHERLANDSFCI NederlandEssebaan 72908 LJ CAPELLE A/D IJSSELTel.: +31 – 10 264 3333Fax: +31 – 10 264 3399E-mail:[email protected]

SPAINFCI Connectors EspañaPoligono Industrial08781 St. Esteve SesroviresTel.: +34 – 93 771 4012Fax: +34 – 93 771 3197E-mail: [email protected]

SWEDENFCI Connectors SwedenSjöviksbacken 12Box 47084 100 74 StockholmTel.: +46 – 8 685 5300Fax: +46 – 8 685 5355E-mail: [email protected]

SWITZERLANDFCI SchweizSihlbruggstrasse 1446340 BAARTel.: +41 – 41 760 1434Fax: +41 – 41 761 0647

Europe:

FCI USA825 Old Trail RoadEtters, Pennsylvania 17319Tel. : 1-800 237 2374Fax : 1-717 938 7604E-mail : [email protected]

Americas:

www.fciconnect.com

Exit Contents











Millipacs® 8 Row Type FR

Description

A new module type has been added to our product offering for the 8+2 row family, the FR module.

The new FR module is designed to compliment the existing F module in applications where a Type F module is used on the front side of the backpanel and a mirror image of this same module (thus called the F Reversed or FR module) is required on the rear side of the board in order to make a complete midplane system.

The 25mm type F module offers 88 signals with an asymmetrical guide feature (at one end of the connector body), the new type FR module hasthe same guide feature, but it is located on the opposite side of the body.

The Millipacs® 2 mm Hard Metric Interconnection System consists of 5+2and 8+2 row Connector families compliant with the IEC specifications.


Americas Tel . : 800 237 2374

717 938 7200

Europe Tel . : 33 1 39 49 21 83

Asia/Pac i f ic Tel . : 65 549 6666

Interconnection System Features & Benefits

• Header and Receptacle moduleswith Press-fit terminations

• Shroud Modules provide excellentterminal positioning support

• Header Modules offer Short or Plug-Up terminations

• One-piece rigid receptacle housing design

• Integrated shielding (optional)• Customized loading patterns• All 8 row Receptacle Modules have

a reduced tail grid in transversaldirection (1.5 mm) – that meansalmost 40% more contacts in lessthan 20% more space than 5 row

Target Markets

• Telecom• Datacom• Test equipment & industrial

instrumentation

Target Applications

• Test equipment: IC test equipment• Datacom: Routers, hubs, core

switches, modems• Telecom: Switches• Applications with auxiliary

cards (Clock, option, etc.)• cPCI designs requiring higher

density of signals

Millipacs® 8 Row Type FR

Specifications

• Products fully in accordance with IEC 61076-4-101, but not yet included in the specification as of this date

Part Numbers


Americas Tel . : 800 237 2374

717 938 7200

Europe Tel . : 33 1 39 49 21 83


Technical Features Mechanical Performance

9505

68-0

05

7/02

© 2

002

Cop

yrig

ht F

CI,

S.A

.All

righ

ts r

eser

ved

Rep

co G

raph

ics

+1-

314-

426-

1800

Materials

• Housings: Glass filled, high temperature LCPfor receptacle housings and PBT for headerhousings

• Contacts: Phosphor bronze

• Plating: Selective gold over nickel all over,tin-lead on press fit areas

• Mating force: 0.75 N max. per contact pair

• Withdrawal force: 0.15 N min. per contact pair

• Normal force: 0.75 N min. (EOL)

Electrical Performance

• Operating temperature: -55°C to +125°C

• Current rating: 1.5 A at 20°C, 1.0 A at 70°C

• Contact resistance: 20mΩ max.

• Insulation resistance: 104 MΩ min.

Approvals & Certifications

• Recognized per UL/CSA

• Qualified per Bellcore specifications

Description Part Number Insertion ToolingFR Receptacle with location pegs, Unshielded HM2R82PA8100N9 Flat RockFR Receptacle with location pegs, Shielded and 2pc Lower Shield Compatible HM2R82PA8101N9 Flat RockFR Receptacle with location pegs,Top shielded and 1pc Lower Shield Compatible HM2R82PA8108N9 Flat RockFR 1 piece lower shield HM2LS11A8* Flat RockFR Receptacle without location pegs, Unshielded HM2R90PA8100N9 Flat RockFR Receptacle without location pegs, Shielded and 2pc Lower Shield Compatible HM2R90PA8101N9 Flat RockFR Receptacle without location pegs,Top shielded and 1pc Lower Shield Compatible HM2R90PA8108N9 Flat RockFR 1 piece lower shield HM2LS11A8* Flat RockFR Header, Unshielded stub contacts HM2P82PD8110N9 PAY245A14FR Header, Shielded stub contacts HM2P82PD8111N9 PAY245A14FR Header, Unshielded RPU contacts HM2P82PK8110GF PAY245A14FR Header, Shielded RPU contacts HM2P82PK8111GF PAY245A14FR Shroud for RPU Tails - See detail below for FR Shroud standoff variations HM2H82P1__ PAY245A102* Availability Q3 2002

Part Number L1 L2HM2H82P1 3.0 13.45 AvailableHM2H82P109 3.9 14.35 AvailableHM2H82P115 4.5 14.95 AvailableHM2H82P117 4.7 15.15 AvailableHM2H82P119 4.9 15.35 AvailableHM2H82P122 5.2 15.65 Not Available YetHM2H82P130 6.0 16.45 Not Available Yet

Millipacs® Hard Metric - 5 RowMale Right Angle Modules

Description

FCI introduces 5+1 row Male Right Angle series in the standard signal modulesA, B & C and also B19 & B22 sizes for CompactPCI compatibility. The topshield row is optional.

Pin layout configurations are available to support cPCI modules for standardform factors.

This system is designed for applications requiring co-planar board-to-boardconnection within the normal Hard Metric Millipacs environment. When usedin conjunction with Right Angle Receptacles, this system is suitable forExtender or Test Card designs.

In addition to co-planar design, these Right Angle Headers can also be used inapplications that require an indestructible BackPlane (i.e. where any risk ofBackPlane Pin damage is unacceptable). Vertical receptacles can be used inplace of Vertical Headers on the the BackPlane and Right Angle Headers areused on the Daughter Cards (requires a slight PCB dimensional adjustment).

The standard Millipacs® 2 mm Hard Metric Interconnection System consists of5+2 and 8+2 row connector families compliant with the IEC specifications.


Americas Tel . : 800 237 2374

717 938 7200

Europe Tel . : 33 1 39 49 21 83



• cPCI compatible• Press fit terminations• Integrated top shield options• Customized loading patterns• Flat Rock tooling insertion process

Target Markets

• cPCI users requiring Reverse Gender

• Telecom• Datacom• Test equipment & Industrial

Instrumentation• Medical

Target Applications

• Extender Cards• Test Cards• Reverse Gender Backplanes

Millipacs® Hard Metric - 5 RowMale Right Angle Modules





Part Numbers


Americas Tel . : 800 237 2374

717 938 7200

Europe Tel . : 33 1 39 49 21 83



9505

68-0

10

8/02

© 2

002

Cop

yrig

ht F

CI,

S.A

.All

righ

ts r

eser

ved

Rep

co G

raph

ics

+1-

314-

426-

1800

Materials

• Housings: Glass filled, high temperature LCP






Specifications

• Products fully in accordance with IEC61076-4-101, but not included in thespecification as of this date

• Drop-in replacement for similar competitors’ products


• UL and CSA approval pending

Description Right Angle module Toolingtype A non shielded HM2J07PE5110N9 Flat rocktype A top shielded HM2J07PE5118N9 Flat rocktype B non shielded HM2J08PE5110N9 Flat rocktype B top shielded HM2J08PE5118N9 Flat rocktype B22 non shielded HM2J70PE5110N9 Flat rocktype B22 top shielded HM2J70PE5118N9 Flat rocktype B19 non shielded HM2J71PE5110N9 Flat rocktype B19 top shielded HM2J71PE5118N9 Flat rocktype C non shielded HM2J09PE5110N9 Flat rocktype C top shielded HM2J09PE5118N9 Flat rock

* customized loading patterns on request, check with marketing for availability.

Description cPCI stub header cPCI Right Angle module Remarktype A HM2P07PDG1A1N9 HM2J07PEG1A8N9 P1, P4 module type B22 HM2P70PDE121N9 HM2J70PEE128N9 P2, P5 moduletype B19 HM2P71PDE121N9 HM2J71PEE128N9 P3 module

Millipacs® reverse gender modules

cPCI reverse gender modules

Millipacs® Hard Metric 5+2 Row Vertical Receptacle Modules

Description

FCI introduces a new line of 5+2 row Vertical Receptacles that are available in the standard signal modules A, B & C and also B19 & B22 sizes forCompactPCI compatibility. The two shield rows are optional. All modules are available with Standard Tail or Rear Plug-Up Tails (for use with a HeaderShroud on the Rear side of the PCB BackPlane).

This system is designed for applications requiring a parallel board-to-boardconnection within the normal Hard Metric Millipacs® environment. These vertical receptacle modules, when mated to a standard straight header aresuitable for both parallel and mezzanine board-to-board applications

In addition to parallel and mezzanine designs – these Vertical Receptacles canalso be used in applications that require an indestructible BackPlane (i.e.whereany risk of BackPlane pin damage is not acceptable). Vertical Receptacles canbe used in the place of Vertical Headers on the BackPlane, and Right AngleHeaders are used on the Daughter Cards (requires a slight PCB dimensionaladjustment).

The Millipacs® 2 mm Hard Metric Interconnection System consists of 5+2 and8+2 row Connector families compliant with the IEC 1076-4-101 specifications.


Americas Tel . : 800 237 2374

717 938 7200

Europe Tel . : 33 1 39 49 21 83



• cPCI compatible• Press fit terminations• Resilient one-piece receptacle

housing design• Integrated shield options• Customized loading patterns• Short tail and rear plug up

terminations• Flat rock tooling insertion process

for unshielded versions

Target Markets

• cPCI users requiring reverse gender• Telecom• Datacom• Test equipment & industrial

instrumentation• Medical

Target Applications

• Parallel board-to-board applications• Mezzanine packaging• Baby board applications• Reverse gender cPCI systems when

used with right angle headers

Millipacs® Hard Metric 5+2 Row Vertical Receptacle Modules




• Contact resistance: 20mΩ max.


Part Numbers


Americas Tel . : 800 237 2374

717 938 7200

Europe Tel . : 33 1 39 49 21 83



9505

68-0

04

8/02

© 2

002

Cop

yrig

ht F

CI,

S.A

.All

righ

ts r

eser

ved

Rep

co G

raph

ics

+1-

314-

426-

1800

Materials

• Housings: Glass filled, high temperature LCP






Specifications

• Products fully in accordance with IEC61076-4-101, but not included in thespecification as of this date

• Fully intermatable with other comparable competitive hard metricproducts


• UL and CSA approval pending

* Standard insert tooling, othertooling (push blades or anvils)may be required dependingon your requirements andthe press being used, pleasecall technical services formore information

Description FCI Part Number Insertion Tooling*Type A Receptacle (cPCI), Unshielded HM2S10PE5100N9 Flat RockType A Receptacle (cPCI), Shielded HM2S10PE5101N9 PAY245A17Type A Receptacle (cPCI), Unshielded, with RPU Tails HM2S10PK5100GF Flat RockType A Receptacle (cPCI), Shielded, with RPU Tails HM2S10PK5101GF PAY245A17

Type B Receptacle, Unshielded HM2S02PE5100N9 Flat RockType B Receptacle, Shielded HM2S02PE5101N9 PAY245A18Type B Receptacle, Unshielded, with RPU Tails HM2S02PK5100GF Flat RockType B Receptacle, Shielded, with RPU Tails HM2S02PK5101GF PAY245A18

Type C Receptacle, Unshielded HM2S30PE5100N9 Flat RockType C Receptacle, Shielded, HM2S30PE5101N9 PAY245A19Type C Receptacle, Unshielded, with RPU Tails HM2S30PK5100GF Flat RockType C Receptacle, Shielded, with RPU Tails HM2S30PK5101GF PAY245A19

Type B19 (cPCI) Receptacle, Unshielded, HM2S71PE5100N9 Flat RockType B19 (cPCI) Receptacle, Shielded, HM2S71PE5101N9 PAY245A77Type B19 (cPCI) Receptacle, Unshielded, with RPU Tails HM2S71PK5100GF Flat RockType B19 (cPCI) Receptacle, Shielded, with RPU Tails HM2S71PK5101GF PAY245A77

Type B22 (cPCI) Receptacle, UnShielded, HM2S70PE5100N9 Flat RockType B22 (cPCI) Receptacle, Shielded, HM2S70PE5101N9 PAY245A76Type B22 (cPCI) Receptacle, Unshielded, with RPU Tails HM2S70PK5100GF Flat RockType B22 (cPCI) Receptacle, Shielded, with RPU Tails HM2S70PK5101GF PAY245A76

Fci Connector Catalog

Documents

Transcript of Fci Connector Catalog