FC EXPO 2020 - tatsuno-corporation.com › wp-content › uploads › 2020 › 02 › F… ·...
Transcript of FC EXPO 2020 - tatsuno-corporation.com › wp-content › uploads › 2020 › 02 › F… ·...
FC EXPO 2020Int'l Hydrogen & Fuel Cell Expo (FC EXPO 2020)
Reference exhibition model ready for self-fueling of hydrogen
LF Self
H70H70
High-pressure Hydrogen Dispensers for Fuel Cell Vehicles7070MPaMPa
H70H70
LF & LS
M
【 ETL Intertek Certi�ed 】
H70H70
High-class model with highest installation number in Japan
● Choice of nozzle position - front & side.
● Designed for the good visibility of the surroundings.
Dispenser for movable hydrogen stations
● Compact design for easy storing on a truck trailer.
● Designed for easy daily maintenance.
● Easy fueling without climbing the trailer.
Simultaneous fueling with two nozzle is here
● Double nozzle dispenser for the North American market.
● Simultaneous fueling on both side for
increased fueling ef�ciency.
● Design with emphasis on safe self-fueling.
87.5 MPa (max)Fill Pressure±1.5 % Measuring Accuracy0.25~5.0 Kg/minMeasuring Range
■ Supports 82 MPa high-pressure fueling■ Compact and stylish design with large displays■ Usable with both on-site and off-site production■ Compatible with the latest international fueling protocols■ Compatible with pre-cooling to -40°C■ Connectable to existing POS terminals
■ Supports 82 MPa high-pressure fueling■ Compact and stylish design with large displays■ Usable with both on-site and off-site production■ Compatible with the latest international fueling protocols■ Compatible with pre-cooling to -40°C■ Connectable to existing POS terminals
● One-side �lling
● Both-side �lling
H35H35
High-pressure Hydrogen Dispensers for Fuel Cell Forklifts3535MPaMPa
H35H35
FN-1027
FS
F
Hydrogen Nozzle for H70
● Equipped with Tatsuno-made IR Interface
for data transfer.
● Construction with a low risk of leakage.
● Light weight of 1.6 kg, compact size with excellent
usability and durability.
● Completed life-cycle test & durability test.
● Explosion-proof certi�cations. (ATEX, IECEx, NEPSI)
【 ETL Intertek Certi�ed 】IR Receiver / Control box
Design suitable for limited spaces
● Displays and operation buttons on both sides.
● Usable with remote management systems for real-time monitoring.
● Connectable to existing POS terminals.
Simple design for an easy operation
● Basic model without display.
● Internal parts installed outside the dispenser for a compact design.
● Equipped with a �ame detector.
■ Designed for 35 MPa■ Compact design for installation in limited spaces 35.0 MPa (max)Fill Pressure
±1.5 % Measuring Accuracy0.25~3.0 Kg/minMeasuring Range
■ Designed for 35 MPa■ Compact design for installation in limited spaces
Made byTATSUNOMade by
TATSUNO
■ Coriolis Mass Flowmeter for Hydrogen (120MPa Class)
Coriolis Mass FlowmeterCoriolis Mass Flowmeter
Model
Features
Pressure
Accuracy
Ex.-proof
Output
BA-1025
Separated model
Max. 120 MPa
±0.5% (10 to 360kg/h)
Ex d ia ⅡB+H2, Ex(Japan), ATEX, IECEx, NEPSI(China), KOSHA(Korea)
Pulse 2ch, 4-20mA 2ch, LCD Display
Fluid Temp. -50℃ to +85℃
Model
Features
Pressure
Accuracy
Ex.-proof
Output
FM-1135
New Integrated model
Max. 120 MPa
±0.5% (10 to 360kg/h)
Ex d ib ⅡCT4 Gb, Ex(Japan), ATEX, IECEx, NEPSI(China), KOSHA(Korea)
Pulse 2ch, Modbus, Bluetooth
Fluid Temp. -50℃ to +85℃
Certi�cations ETL (Intertek)
Separate Model
Integrated 2-in-1 Model
■ Coriolis Mass Flowmeters for CNG/LNG
ER-1308-C/AConverter for LNG/CNG
FM-1031-BDetector for Boil off Gas(Small Bore)Extra cold resistantMaximum �ow 20 kg/minMass Flow Accuracy ±0.5%
FM-1031-ADetector for LNG(Large Bore)Extra cold resistantMaximum �ow 200 kg/minMass Flow Accuracy ±0.5%
FM-1026Detector for CNG
High pressure resistant (Max 31.4MPa)Maximum �ow 6000 kg/minMass Flow Accuracy ±0.3%
2020.02 (2000VS) FZ01cA_EN
● Best for ultra-high pressure measurement
● High accuracy ±0.5% & Low pressure loss
● High Number of Installations
http://www.tatsuno.co.jp/english/