FBN EN 05-2013 - Van Moppes · 2013-06-14 · Improves wheel life and surface finish. Titanium and...
Transcript of FBN EN 05-2013 - Van Moppes · 2013-06-14 · Improves wheel life and surface finish. Titanium and...
![Page 1: FBN EN 05-2013 - Van Moppes · 2013-06-14 · Improves wheel life and surface finish. Titanium and nickel coating at 60% of total FBN particle weight. Recommended where better particle](https://reader030.fdocuments.in/reader030/viewer/2022040309/5f0c57e87e708231d434ee75/html5/thumbnails/1.jpg)
L.M. Van Moppes & Sons SA P.O.Box 1550 1211 Geneva 26 SwitzerlandT.+41 22 342 34 50 F. +41 22 342 34 51 [email protected]
www.idf-superabrasives.comwww.vanmoppes.ch
FBN Coatings
Nickel coating at 60% of
total particle weight.
Recommended for phenolic
resin bonds and polyimide
bonds, for improved
mechanical retention of the
CBN particles in the bond.
Improves wheel life and
surface finish.
Titanium and nickel coating at 60% of
total FBN particle weight.
Recommended where better particle
retention is required in resin and
polyimide bonds. Enhances the
chemical bond between CBN particles
and their coating, for improved wheel
life and performance consistency.
Titanium coating at 2% of total
particle weight, specially designed
for bonds containing cobalt, iron and
bronze. The thin titanium layer is
applied chemically by the CVD
method and forms a bridge between
the CBN particles and the metal
bond.
N60
TN60
T2
05.2
013