FB Maschinenbau | Institut für Produktionsmanagement, Technologie und Werkzeugmaschinen | Prof....
-
Upload
muriel-thompson -
Category
Documents
-
view
214 -
download
2
Transcript of FB Maschinenbau | Institut für Produktionsmanagement, Technologie und Werkzeugmaschinen | Prof....
FB Maschinenbau | Institut für Produktionsmanagement, Technologie und Werkzeugmaschinen | Prof. Dr.-Ing. E. Abele | 21XXXXKÜ1 | 1
Our Partners (in excerts)
Our Offers to the industry
Optimization of the Tool Geometry and the Machining Parameters to Increase Tool Life and to Enhance the Surface Quality of the Components
Centrifugal Force Tests for HSC-Tools and Rotating Components
Analysis of the Force and Vibration Ratios in High Speed Machining to Predict Process Stability
Our Competences
Development of Optimized Tools (e.g. Cutting Materials, Coating) used for the Field of High Speed Cutting of Sheet Metal
Determination of the Maximum Operating Speed of fast Rotating tools by Destructive and Non-Destructive Testing
Research Topic High Speed MachiningContact person: Jia Tian | [email protected] | 06151-16-3456
FB Maschinenbau | Institut für Produktionsmanagement, Technologie und Werkzeugmaschinen | Prof. Dr.-Ing. E. Abele | 21XXXXKÜ1 | 2
Research Topic Titanium MachiningContact person: Roland Hölscher I [email protected] | 06151-16-3456
Current Research Topics
Tool Life while Machining different Titanium alloys
Research of different Cool and Lubrication Medium(Waterbased Emulsion, Ester-Oil, CO2-Cooling, MQL)
Influence and Performance of Coatings on Tool Life
Development and Evaluation of High Feed Tools (HFC)
Influence of Machine Oscillations and Stability on the Cutting Process
Examinations of the Usage of the HSC-Effect
New Strategies for Economic Titanium-Machining
Our Offers to the Industry
Analysis of Machining Parts and Tools
• Process Forces• Vibration Behaviour• Part Quality• Tool Wear, eg.
Our Partners (in excerpts)
FB Maschinenbau | Institut für Produktionsmanagement, Technologie und Werkzeugmaschinen | Prof. Dr.-Ing. E. Abele | 21XXXXKÜ1 | 3
Research topic Powertrain MachiningContact persons: Patrick Pfeiffer | [email protected] | 06151-16-6624
Our Partners (in excerpts)
Our Competences
Holistic Increase in Productivity for Machining Processes within the Automobile Powertrain
Implementation of Innovative Cooling and Lubricating Strategies
Designing of High Performance Cutting ToolsOur Offers to the Industry
Analysis and Designing of Turning, Milling and Cylinder Boring Processes Concerning
- Tool Life and Wear Mechanisms- Process Forces- Part Quality
Optimization of Tool Geometry for High Performance Cutting Tools (Carbide, Ceramic, cBN, PCD) to Improve the Operational Behavior
Mapal
FB Maschinenbau | Institut für Produktionsmanagement, Technologie und Werkzeugmaschinen | Prof. Dr.-Ing. E. Abele | 21XXXXKÜ1 | 4
Research topic Drilling and ReamingContact persons: Thomas Hauer | [email protected] | 06151-16-6621
Our Partners (in excerts)
Our Competences
Tool Optimization for High Performance in Drilling and Reaming Simulation of Drilling and Reaming Operations Control of Uncertainties in the Process Chain Drilling-Reaming
Our Offers to the industry
Analysis of Tools for Drilling and Reaming Concerning
- Process Forces- Vibration Behaviour- Part Quality- Tool Wear
Optimization of Tool Geometry for an Improvement in Operational Behaviour