Fat Quarter Friendly Projects · Dog Bone Bag Accessory Requirements: INSTRUCTIONS NOTE: Use a...

1 2 3 4 Fat Quarter Friendly Projects Dog Bone Bag Accessory INSTRUCTIONS NOTE: Use a 0.6cm (1/4”) seam allowence throughout project. Adjust neck band to ﬁt your dogs collar. CUT INSTRUCTIONS: Cut Four bones Hanging loop cut rectangle 10cm x 4cm. Xip tabs 2cm x 4cm Requirements: •Three fat quarters •Medium weight iron on interfacing •12cm zip •Snap hook •Matching Threads •Optional fabic glue pen •button- Optional Trace the box markings from template B on to two bone shapes (Front and Lining). Sew around the box shape on both front and lining. Cut inside the box see tempate B (red line). Fold back the cut raw edges to wrong side and press, revealing neat rectangle. Place zip tab wrong side up on zip ends, sew across zip teeth 1cm from end. Fold the tab round the end of the zip and sew the tab down to secure neatly. Repeat process on both zip ends. Place prepared zip behind front panel and position in the rectangle opening. Use a glue pen to hold the zip in place, place the lining behing the zip ensuring that fabric is facing right side up. Sew to secure down both edges of the zip. 5 Fold hanging loop lengthwise, fold raw edges to the middle then fold on crease line, edge stitc to secure. Feed through snap hook. Tuck the raw end between lining and back and sew to hold in place. 6 lay the front and back bones together, making sure the linings is right sides together and outer panel are right sides facing out. Sew around the edge of the bone using a decotative stitch. Your project is complete.

Upload
others
Category

Documents
view
1
download
0

Embed Size (px):

Transcript of Fat Quarter Friendly Projects · Dog Bone Bag Accessory Requirements: INSTRUCTIONS NOTE: Use a...

Fat Quarter Friendly Projects

Dog Bone Bag Accessory INSTRUCTIONS

NOTE:Use a 0.6cm (1/4”) seam allowence throughout project.Adjust neck band to fit your dogs collar. CUT INSTRUCTIONS:Cut Four bonesHanging loop cut rectangle 10cm x 4cm.Xip tabs 2cm x 4cm

Requirements:•Three fat quarters•Medium weight iron on interfacing•12cm zip•Snap hook•Matching Threads•Optional fabic glue pen•button- Optional

Trace the box markings from template B on to two bone shapes (Front and Lining).

Sew around the box shape on both front and lining. Cut inside the box see tempate B (red line). Fold back the cut raw edges to wrong side and press, revealing neat rectangle.

Place zip tab wrong side up on zip ends, sew across zip teeth 1cm from end. Fold the tab round the end of the zip and sew the tab down to secure neatly. Repeat process on both zip ends.

Place prepared zip behind front panel and position in the rectangle opening. Use a glue pen to hold the zip in place, place the lining behing the zip ensuring that fabric is facing right side up.Sew to secure down both edges of the zip.

5 Fold hanging loop lengthwise, fold raw edges to the middle then fold on crease line, edge stitcto secure. Feed through snap hook. Tuck the raw end between lining and back and sew to hold in place.

6 lay the front and back bones together, making sure the linings is right sides together and outerpanel are right sides facing out. Sew around the edge of the bone using a decotative stitch. Your project is complete.