Fasti-Koch ERD Micro
1
Drying hygroscopic resin with factory-made compressed air is the economic alternative compared to conventional drying systems. Pre-dried compressed air from the customers air system is expanded to atmospheric pressure. Thus the dew point of the process air sinks to a low level. Subsequently the process air is heated to the required drying temperature and released into the drying hopper (ERD-Compressed Air Technology). The ERD-Technology guarantees perfect drying results, low operating costs and a virtually maintenance free production. With hopper sizes up to 3 liters, the ERD Micro+ has been developed especially for the production of very small parts and components (micro injection molding). It combines the advantages of approved technology and compact modular design. Results: A small plastic-dryer with continuous drying performance, maximum reliability, easy handling and less space requirements. Benefits of the dryer: • Approved ERD Compressed Air Technology • Compact modular design (Pilot-Design) • Sizes of drying-containers: ½, 1, 2, 3 liters • Drying container made of double-wall-glass • Low maintenance and energy demands • Applicable for all plastic materials • Suitable for high performance plastic up to 160 °C (320 °F) • If required, dew point up to -65°C (-85 °F) • Easy installation („plug & play“) • Integration on all standard types of machines • Installation as top mounted dryer with optional separation of container and module • AirJet conveying system optional • Wide range of system accessories Drying process control with touch panel: • Control of drying time with and without temperature decrease • Integrated weekly timer program • Data bank for up to 99 materials • Adapted regulation of power quantity and air volume to the flow of material • Control for conveying / emptying • Mode for charge drying • Dew point display with dew point sensor as an option • Optional interfaces: USB, Ethernet Drying of smallest quantities of resin © Fasti-Koch GmbH, Industriestr. 3, D-75228 Ispringen, Tel.: +49 7231 8009-800, [email protected] , 3102 Airjet conveying system ERD-Compressed Air Technology Touch Panel Control Modern and space-saving Pilot-Design FASTI – A KOCH GROUP COMPANY EN NEW www.fasti-koch.com
-
Upload
koch-technik -
Category
Documents
-
view
331 -
download
2
description
The Fasti Koch ERD Micro is a compressed air dryer for resin. The unit will be top mounted onto the processing machines how injection moulding machines. The ERD Micro works with the approved ERD Compressed Air Technology developed by Fast-Koch. The manufacturer Fasti-Koch is a company under the umbrella of Koch-Technik, Germany.
Transcript of Fasti-Koch ERD Micro
Drying hygroscopic resin with factory-made compressed air is the economic alternative compared to conventional drying systems. Pre-dried compressed air from the customers air system is expanded to atmospheric pressure. Thus the dew point of the process air sinks to a low level. Subsequently the process air is heated to the required drying temperature and released into the drying hopper (ERD-Compressed Air Technology).
The ERD-Technology guarantees perfect drying results, low operating costs and a virtually maintenance free production. With hopper sizes up to 3 liters, the ERD Micro+ has been developed especially for the production of very small parts and components (micro injection molding). It combines the advantages of approved technology and compact modular design.
Results: A small plastic-dryer with continuous drying performance, maximum reliability, easy handling and less space requirements.
Benefits of the dryer:
• Approved ERD Compressed Air Technology• Compact modular design (Pilot-Design)• Sizes of drying-containers: ½, 1, 2, 3 liters• Drying container made of double-wall-glass• Low maintenance and energy demands • Applicable for all plastic materials• Suitable for high performance plastic
up to 160 °C (320 °F)• If required, dew point up to -65°C (-85 °F)• Easy installation („plug & play“)• Integration on all standard types of machines • Installation as top mounted dryer with
optional separation of container and module• AirJet conveying system optional• Wide range of system accessories
Drying process control with touch panel:
• Control of drying time with and without temperature decrease
• Integrated weekly timer program• Data bank for up to 99 materials• Adapted regulation of power quantity and
air volume to the flow of material• Control for conveying / emptying• Mode for charge drying• Dew point display with dew point sensor
as an option• Optional interfaces: USB, Ethernet
Drying of smallest quantities of resin
© F
asti-
Koc
h G
mbH
, Ind
ustr
iest
r. 3,
D-7
5228
Ispr
inge
n, T
el.:
+49
723
1 80
09-8
00, i
nfo@
fast
i-koc
h.co
m ,
3102
Airjet conveying system
ERD-Compressed Air Technology
Touch Panel ControlModern and space-saving Pilot-Design
FAsti – A KoCh GRoup CompAnyEN
nEW
www.fasti-koch.com
