FASTENERS HangerMate Threaded Rod Anchoring SystemHangerMate® Threaded Rod Anchoring System...
Transcript of FASTENERS HangerMate Threaded Rod Anchoring SystemHangerMate® Threaded Rod Anchoring System...
IndustrialSAMSON Industrial
“Quality products...Excellent service” www.samsonindustrialonline.com
Tel:(800)716-9620 * Fax:(212)202-3600
FASTENERS
D-34
ELC EZG160 1/4-20 .060"-.250" 1/4"-20 x 1" #3 50
ELC EZG450 3/8-16 .060 -.125" 1/4"-20 x 1" #2 50
ELC EZG470 3/8-16 .060"-.250" 1/4"-20 x 1" #3 50
ELC EZG471* 3/8-16 .060"-.250" 1/4"-20 x 1" #3 50
ELC EZG490 3/8-16 .060"-.250" 1/4"-20 x 1-1/2" #3 50
ELC EZG491* 3/8-16 .060"-.250" 1/4"-20 x 1-1/2" #3 50
ELC EZG530 3/8-16 .060"-.250" 1/4"-20 x 2" #3 50
ELC EZG540 3/8-16 .060"-.250" 1/4"-20 x 3" #3 50
ELC EZG510 3/8-16 .187” - .500" 1/4"-20 x 1-1/2" #5 50
ELC EZG511* 3/8-16 .060"-.500" 1/4"-20 x 1-1/2" #5 50
ELC EZG550 3/8-16 .060"-.250" 5/16"-24 x 1-1/8" #3 50
ELC EZH155 1/4-20 .060"-.250" 1/4"-20 x 1" #3 50
ELC EZH455 3/8-16 .060"-.125" 1/4"-20 x 1" #2 50
ELC EZH475 3/8-16 .060"-.250" 1/4"-20 x 1" #3 50
ELC EZH476* 3/8-16 .060"-.250" 1/4"-20 x 1" #3 50
ELC EZH495 3/8-16 .060"-.250" 1/4"-20 x 1-1/2" #3 50
ELC EZH496* 3/8-16 .060"-.250" 1/4"-20 x 1-1/2" #3 50
ELC EZH515 3/8-16 .187 - .500" 1/4"-20 x 1-1/2" #5 50
ELC EZH516* 3/8-16 .060"-.500" 1/4"-20 x 1-1/2" #5 50
ELCEZH535 3/8-16 .060"-.250" 1/4"-20 x 2" #3 50
The HangerMate
Product Description Product Selection Guide For Steel ApplicationsVertical Mount: End Drilled Head
PRODUCT ITEM FOR ROD STEEL SIZE POINT BOXCODE SIZE THICKNESS SIZE QTY.
HangerMate® Threaded Rod Anchoring System
Horizontal Mount: Cross Drilled Head
• * Includes backing nuts, which greatly improve pull-out values in thin material.• All above self-drilling points and self-tapping threads.• All anchors are available in master cartons of 300 pcs.
Advantages• Entire system requires only one driver.• Easy to install with contractor grade
power tools.• Self-drilling points for steel up to .500”
thick.• In wood applications, no pre-drilling is
typically required.• Many styles UL listed and/or FM
approved.• Solid, one piece cold formed part,
the head cannot spin off or unscrewfrom body.
Applications• Piping System to Bar Joist, Concrete,
Wood, Z-purlin.• Eye Rod for Cable/Coaxial/Electrical
to Concrete.• Cable Tray to Steel Channel.• Speed Installation of HVAC, General
Piping, Strut Channels, SuspendedCeiling Grids, Refrigeration, FireSprinkler, and Electrical/Lighting
• * Includes backing nuts, which greatly improve pull-out values in thinmaterial. • All anchors are available in master cartons of 300 pcs
® threadedrod anchoring systemincludes end-drilled headsfor ceiling/vertical mountapplications and cross-drilled heads for wall/horizontal mountapplications. Heads are drilled and tappedto accept 1/4"-20 and3/8"-16 threaded rod.
Point and thread styles aredesigned to ease installationinto specific materials. Forsteel applications, a wide variety of pointsizes and shank lengths are available.Use the Product Selection Guide to find theoptimal fastener for your application.
Need a Domestic Fastener Supplier?
Certification Letter of Origin Provided
IndustrialSAMSON Industrial
“Quality products...Excellent service” www.samsonindustrialonline.com
Tel:(800)716-9620 * Fax:(212)202-3600
FASTENERS
D-35
ELC EZG315 1/4-20 5/16"-14 x 2-1/4" 50
ELC EZG650 3/8-16 5/16"-14 x 2-1/4" 50
ELC EZG670 3/8-16 5/16"-14 x 3” 50
Product Selection Guide For Wood ApplicationsVertical Mount: End Drilled HeadPRODUCT ITEM FOR ROD SIZE BOX
CODE SIZE QTY.
Horizontal Mount: Cross Drilled Head
• Waxed high-low thread and Type 17 point with shank slot; typically, no pre- drilling is required
ELC EZG365 1/4-20 5/16"-14 x 2-1/4" 50
ELC EZG730 3/8-16 5/16"-14 x 2-1/4" 50
Product Selection Guide For Concrete/Masonry ApplicationsVertical Mount: End Drilled HeadPRODUCT ITEM FOR ROD SIZE BOX
CODE SIZE QTY.
Horizontal Mount: Cross Drilled Head
• High-low thread and gimlet point
ELC EZH320 1/4-20 5/16"-14 x 2-1/4" 50
ELC EZH665 3/8-16 5/16"-14 x 2-1/4" 50
ELC EZH370 1/4-20 5/16"-14 x 2-1/4" 50
ELC EZH735 3/8-16 5/16"-14 x 2-1/4" 50
ELC EZG910 1/4-20 1/4”-10 x 2 50
ELC EZG930 3/8-16 1/4”-10 x 2 50
ELC EZH935
ITEM DESCRIPTION QTY. CODEInstallation Tools
HangerMate®Threaded Rod Anchoring
• Self-Drilling Point
Installation into Concrete/Masonry ApplicationsInsert tanged bit (ELC EZE340) in bit holder (ELC EZE240),or use SDS bit (ELC EZE350. Drill hole, then slide concretedrive socket (ELE EZE220) over bit and onto hex. Insertanchor into socket andinstall. Parts can beinstalled in concreteusing standard 1/4"masonry bit to drillhole and use ELCEZE215 drive socket toset anchor.
Product Selection Guide HangerMate® LGLight Gauge and/or Blind Applications
PRODUCT ITEM FOR ROD MAX. PIPE MIN. STEEL SIZE BOXCODE SIZE DIAMETER THICKNESS QTY.
ELC EZG580 3/8"-16 2.5" 22Gauge 1/4"-20x1" w/insert 25
ELC EZG590 3/8"-16 3.5" 18 Gauge 1/4"-20x1" w/insert 25
ELC EZG600 3/8"-16 4" 16 Gauge 1/4"-20x1" w/insert 25
ELC EZG610 Collapsing Insert with internal 1/4"-20 threads 25• ELC EZG580, EZG590 and EZG600 are shipped with 25 inserts and 25 collapsing inserts per box.• Also available in master cartons of 150 inserts per box.
PRODUCT ITEM FOR ROD SIZE BOXCODE SIZE QTY.
HangerMate ® MP For Wood, Steel or Concrete
ELC EZE215 Drive Socket 1For Concrete Applications
ELC EZE220 Drive Sleeve 1
ELC EZE240 Drill bit Adaptor Kit 1
ELC EZE340 ANSI 1/4” Tanged Drill Bit forHammer Drills 5
ELC EZE350 ANSI 1/4” SDS Drill Bit for Rotary Hammer Drills 5
ELC EZE290 Tool to install EZG610 1
Need a Domestic Fastener Supplier?
Certification Letter of Origin Provided