Fasteners & Common Assembly Components
description
Transcript of Fasteners & Common Assembly Components
![Page 1: Fasteners & Common Assembly Components](https://reader036.fdocuments.in/reader036/viewer/2022081517/56816595550346895dd86877/html5/thumbnails/1.jpg)
Fasteners& Common Assembly Components
![Page 2: Fasteners & Common Assembly Components](https://reader036.fdocuments.in/reader036/viewer/2022081517/56816595550346895dd86877/html5/thumbnails/2.jpg)
Types of Fasteners
• Bolts/Screws• Washers• Nuts• Retaining Rings
![Page 3: Fasteners & Common Assembly Components](https://reader036.fdocuments.in/reader036/viewer/2022081517/56816595550346895dd86877/html5/thumbnails/3.jpg)
Types of Bolts for Fastening
Most of the above fasteners require a Clearance Hole and the underside of each fastener’s head sits flush with the surface that the hole is located in.
Socket Head Cap Screws can be used as described above or put in a Counterbored Hole to allow the head of the fastener to sit flush with the surface of the part
Flat Head Screws should be used in Countersunk holes to allow the head to sit flush
![Page 4: Fasteners & Common Assembly Components](https://reader036.fdocuments.in/reader036/viewer/2022081517/56816595550346895dd86877/html5/thumbnails/4.jpg)
Clearance Hole
![Page 5: Fasteners & Common Assembly Components](https://reader036.fdocuments.in/reader036/viewer/2022081517/56816595550346895dd86877/html5/thumbnails/5.jpg)
Counterbore
![Page 6: Fasteners & Common Assembly Components](https://reader036.fdocuments.in/reader036/viewer/2022081517/56816595550346895dd86877/html5/thumbnails/6.jpg)
Countersunk
![Page 7: Fasteners & Common Assembly Components](https://reader036.fdocuments.in/reader036/viewer/2022081517/56816595550346895dd86877/html5/thumbnails/7.jpg)
Bolt for Locating & Fastening
Precision Shoulder Bolt
Precisely ground diameter used for locating and rotational fastening
![Page 8: Fasteners & Common Assembly Components](https://reader036.fdocuments.in/reader036/viewer/2022081517/56816595550346895dd86877/html5/thumbnails/8.jpg)
Washers
![Page 9: Fasteners & Common Assembly Components](https://reader036.fdocuments.in/reader036/viewer/2022081517/56816595550346895dd86877/html5/thumbnails/9.jpg)
![Page 10: Fasteners & Common Assembly Components](https://reader036.fdocuments.in/reader036/viewer/2022081517/56816595550346895dd86877/html5/thumbnails/10.jpg)
Common Assembly Components
• Bushings• Bearings• Retaining Rings
![Page 11: Fasteners & Common Assembly Components](https://reader036.fdocuments.in/reader036/viewer/2022081517/56816595550346895dd86877/html5/thumbnails/11.jpg)
Bushings• Primary functions are to act as a
wear component and to reduce friction
• Usually used where two components are rotating (not constantly)
• Also used to locate other parts (wear item)
• Sleeve Type or Flanged Type as shown
• Common Material types: Bronze (oillite), Brass, Teflon, Plastics, etc.
![Page 12: Fasteners & Common Assembly Components](https://reader036.fdocuments.in/reader036/viewer/2022081517/56816595550346895dd86877/html5/thumbnails/12.jpg)
Bearings
• Each type is designed for different applications (Load Types)
• Ball Bearings are most common• Used when rotating objects are
consistently moving (wheel bearings)
• Each require specific fits outlines by the manufacturer based on the application
![Page 13: Fasteners & Common Assembly Components](https://reader036.fdocuments.in/reader036/viewer/2022081517/56816595550346895dd86877/html5/thumbnails/13.jpg)
Retaining Rings
• Used to secure location along the axis of a shaft
• Commonly used to secure bearings on shafts or in housings
• External or Internal designs, with varying means of insertion and removal
![Page 14: Fasteners & Common Assembly Components](https://reader036.fdocuments.in/reader036/viewer/2022081517/56816595550346895dd86877/html5/thumbnails/14.jpg)
Applying Fastener Knowledge to Manufacturing Class
• Understand the function of the component required; is it simply holding things together or are things locating/rotating around the fastener?
• Be aware of the relationships between fits and fasteners (Clearance holes vs locating/press fits)
• What fastener does the job the best and looks the best? Why have a hex head bolt sticking out when you can use a SHCS?