Farooqi Mohammed Yousuf Saudi Arabia 17.00 Yrs[1]

5
([email protected]) Page 1 of 5 Dear Sir, Iam a Mechanical Engineer presently working with “Zuhair Fayez Partnership Consultants” as a "Senior Mechanical Engineer". Having a total experience of around 17years out of which 15years in Saudi Arabia in Design/Supervision of Mechanical Services like HVAC, Plumbing & Fire Protection Systems. I have very good experience dealing with projects like High Rise Buildings, Airports, Hospitals, Shopping Centers, Hotels, Universities, Mosques, and Residential Compounds etc. Presently looking for a change in carrier, given an opportunity I will prove best of my abilities to meet your requirements. I have a transferable Iqama Please find attached herewith my resume for your kind perusal Thanking you Farooqi Mohammed Yousuf [email protected] Contact: - 966 548574325 Farooqi Mohammed Yousuf Email: [email protected]

description

saudi cv

Transcript of Farooqi Mohammed Yousuf Saudi Arabia 17.00 Yrs[1]

  • ([email protected]) Page 1 of 5

    Dear Sir,

    Iam a Mechanical Engineer presently working with Zuhair Fayez Partnership Consultants as a "Senior Mechanical Engineer".

    Having a total experience of around 17years out of which 15years in Saudi Arabia in Design/Supervision of Mechanical Services like HVAC, Plumbing & Fire Protection Systems.

    I have very good experience dealing with projects like High Rise Buildings, Airports, Hospitals, Shopping Centers, Hotels, Universities, Mosques, and Residential Compounds etc.

    Presently looking for a change in carrier, given an opportunity I will prove best of my abilities to meet your requirements.

    I have a transferable Iqama

    Please find attached herewith my resume for your kind perusal

    Thanking you

    Farooqi Mohammed Yousuf

    [email protected]

    Contact: - 966 548574325

    Farooqi Mohammed Yousuf Email: [email protected]

  • ([email protected]) Page 2 of 5

    [email protected] Mobile No: 00966 - 548 574 325 ________________________________________________________________________________________ Perpetual Experience for over 17 years in the Mechanical Works Specialized in Air-Conditioning Industry, Presently working with Zuhair Fayez Partnership Consultants Jeddah, Saudi Arabia

    Employment History _____________________________________________________________________________________________________

    Present Employer:- Zuhair Fayez Partnership Consultants (Jeddah - K.S.A) June 08 - Till Date Zuhair Fayez Partnership Consultants are Architecture Engineering and Information System Consultants. Working as Senior Mechanical Engineer with ZFP performing following duties:

    Selection of appropriate and economical System for the project, meeting clients budget.

    Man Hours estimation for the Design & Engineering of projects. Preparation & Development of Conceptual Design, Schematic Design, & Final

    Design for the Mechanical system. Design & Calculations for HVAC, Fire Protection and Plumbing works. Calculation for Potable water, Sewage, Fire water Tanks. Pressure Drop calculations for Plumbing/ Chilled Water Piping. Selection of appropriate Equipment for Mechanical System using different

    programs and development of schedule of equipments in coordiantion with Equipments Suppliers.

    Design of Infrastructure Layout. Design of Smoke Management System, Ventilation System. Preparation of Ducting layout, Piping Layout. Coordination with other disciplines. Preparation of Control System Layout in coordination with Control System

    Suppliers. Pump Head Calculation, Static Pressure Calculations for Duct work Review of Drawings & Calculations for Quality Control. Guiding Junior Engineers and draftsman during various design stages.

    Some of Major Projects Completed in Zuhair Fayez partnership ____________________________________________________________________________

    New King Abdul Aziz International Airport at Jeddah.

    -Design of main PTB (Considering LEED Certification Requirements), and support facilities buildings for the New Airport for 35MAP and Design of infrastructure for Complete 80 MAP in three Phases.

    Various Community Facilities Projects of Royal Commission for Jubail & Yanbu. Al Manafea Commercial & residential Towers in Makkah. Detail Design of King Abdullah Bin Abdulaziz for Development of Security

    Facilities MOI (KAP-2) Information Technology and Communication Complex (ITCC) Phase 1 & 2

    At Riyadh.

    Previous Employers:- _____________________________________________________________________________________________________

  • ([email protected]) Page 3 of 5

    1 .Saudi Hotels & Resorts Co. (SHARACO) (Riyadh K.S.A) Sept 07 - May 08

    SHARACOs activities involve Construction, Acquisition and Management of Hotels, Restaurants, Entertainment Centers, Travel & Tourism Agencies and Variety of Beaches, all related Catering Services independently or through others.

    Worked as Senior Mechanical Engineer performed following duties:-

    Working as Client side Consultant involving from the Design stage, Site Execution till the final handing over of the Project to the Operation Team.

    Preparation & Development of conceptual Design for the Mechanical Activities like HVAC, Plumbing & Fire Fighting System.

    Review of Design Consultants Drawings/Specifications based on the SHARACO Requirements and providing necessary guidance for the proper Development of the Project Design.

    Review of Heat Load /Plumbing /Fire Fighting Calculations. Review of Pipe sizing calculations for Chilled Water/Plumbing/Fire Fighting

    System. Review of Shop Drawings/Material for the complete Mechanical Activities from

    the Contractor during the Execution of Projects. Site Supervision by maintaining the Utmost Quality Requirement based upon

    Various Standards (e.g., Marriott Standards for Hotels Project, ASHRAE, NFPA etc.)

    Some of Major Projects Completed with Saudi Hotels & Resorts Co. _____________________________________________________________________________

    Marriott Executive Apartments at Riyadh Diplomat Makarem Hotel at Riyadh Madinah Makarem Hotel Project at Madinah. Al Jazeerah Faisal Compound at Riyadh.

    2. VA TECH SIEMENS LTD. (Riyadh - K.S.A) Dec 05 Sept 07 . VA TECH SIEMENS is a SIEMENS Company engaged in High Voltage Power Transmission & Distribution work mainly dealing with SAUDI ELECTRICITY COMPANY, ARAMCO in Saudi Arabia. Worked as Mechanical Design Engineer performed following duties:-

    Preparation of design for HVAC system including base design Heat Load Calculation Design of Duct layout Selection of Equipment, Control system Base Design Preparation for Fire Protection System Design of Transformer Fire Protection System Hydraulic Calculation using computerized software Preparation of Shop drawings for Transformer Fire Protection System Coordination/Meetings with SEC during the submission & approval of Design. Coordination with Civil & Electrical Design work. Material Planning & Procurement in coordination with Procurement Department

    & Project Manager Co-ordination with Site Activities during the execution of site work etc. Preparation of Operation & Maintenance Manuals. Participation in Tendering.

    Some of Projects Completed with VA TECH SIEMENS LTD. _____________________________________________________________________________

    A no. of 132/13.8 KVA Substations kingdom wide

  • ([email protected]) Page 4 of 5

    3. SAUDI ENSAS CO.LTD (Riyadh - K.S.A.) March 00 Dec 05 SAUDI ENSAS is one of the overseas branches of VOLTAS International Ltd. (A group of TATA CO.) Engaged in Electro-Mechanical Contracting Specialized in HVAC system. Worked as Senior Project Engineer performed the followings duties:-

    Preparation of design for HVAC system, Fire Protection System, Plumbing Works.

    Heat load calculation using Carrier E-20, HAP/CHVAC ELITE Programs. Preparation of Ducting layout, chilled water system. Piping layout for Sprinkler system, Drainage & water supply system. Guiding site engineer in Execution of Site Work and Set-up. Guiding Draftsmen for preparation of Drawings, Working Drawings. Negotiation with the client, Modification of Design based on the actual site

    conditions/requirements, Execution of Design etc. Preparation of Submittals, negotiation with the suppliers, Material procurement

    etc. Pump Head Calculations. Static Pressure Calculations of Duct works for AHUs & Exhaust Fans. Preparation of Monthly Billing, Monthly Progress Reports. Planning Manpower and Material Requirements Preparation of Invoices, Cost Sheet etc. Testing and Commissioning of the HVAC, Fire Fighting, System, Plumbing

    Works List Some of Major Projects Completed with SAUDI ENSAS CO _____________________________________________________________________________________________________

    Ajyad Al Sud Hotel at Makkah. Shoaiba Power Plant Non Technical Building at Shoaiba. Sulieman Al-Rajhi Mosque at Riyadh. Haemodialysis Centre at King Abdul Aziz Medical City, National Guard Hospital at Riyadh. Business Oasis Center at Diplomatic Quarters at Riyadh. College of Medicine, King Faisal University, at Al-Ahsa.

    4. AL-REZAIZA TRAD & TECH. SECS. (Dammam K.S.A.) June 97 March 00 Al-REZAIZA is an Electro-mechanical Contracting firm engaged in Designing/Installation. Testing, Commissioning of HVAC, Fire Fighting, Fire Alarm, Industrial Chilled Water, Oil/Gas piping Systems etc., Worked as Mechanical Site Engineer following site activities of HVAC, & Fire Fighting

    Some of Major Projects Completed ______________________________________________

    Projects accomplished during the tenure in Saudi Arabia: ARAMCO Hospital at Al-Ahsa. Armed Forces Hospital at King Abdul Aziz Air Base, Dahran. Saudi Methanol Company (Ibn-Sina Sabic Group) at Al Jubail. Zamil Group of Industries at Dammam. Giant Stores at Al Jubail.

  • ([email protected]) Page 5 of 5

    5. HBC - Flextech (P) ltd. (Hyderabad, India) June 95 May 97 Worked as Mechanical Engineer in Computer Aided Design Department

    ________________________________________________________________________________________

    Academic Qualification _____________________________________________________________________________________________________

    A Bachelors Degree in Mechanical Engineering Completed in Year 1995 ________________________________________________________________________________________

    Computer Courses/Skills _____________________________________________________________________________________________________

    Office Environments: Very Good Command over Microsoft Operating System Xp/Vista MS-Office, Adobe PDF etc.

    Drafting Software: A Good Working knowledge of AUTO CAD, REVIT Software. Engineering Software: Carriers Hourly Analysis Program for HVAC Load Calculations Elites CHVAC for HVAC Load Calculations Various Manufacturers Equipment Selection Softwares like

    ________________________________________________________________________________________

    Personal Details ____________________________________________________________________________________________________

    Age : 40 Years Marital Status : Married Nationality : Indian Religion : Islam Visa Status (Iqama) : Transferable Driving License (KSA) : Validity until 2020