Fans - literature.puertoricosupplier.comliterature.puertoricosupplier.com/001/MA371.pdf · The...

A

B

C

13/4 in.

*

G CONDENSED PERFORMANCE &DIMENSIONAL DATA

UL/cUL 705 E40001 - G

MODEL A B C*ROOF

OPENINGDAMPER

SIZEIN STOCK SIZES (■)

MIN/MAX RPM

SONES @ 0 in.

PERFORMANCE IN INCHES WG0 .125 .25 .5 .75 1

G-060 17 193/8 121/8 10½ x 10½

8 x 8

■1050 1.7 138 731550 4.2 203 166 120

G-065 17 193/8 121/8 10½ x 10½ ■1050 2.2 187 1101550 4.9 276 232 176

G-070 17 193/8 121/8 10½ x 10½ ■1050 2.7 254 1791550 5.6 374 327 274

G-075 17 193/8 121/8 10½ x 10½ ■1050 3.6 296 2001550 6.1 438 377 310

G-080 17 21¾ 145/8 12½ x 12½

10 x 10

■1050 3.8 335 249 1341550 7.3 495 439 379 238

G-085 17 21¾ 145/8 12½ x 12½ ■1050 4.0 399 307 1791550 7.6 588 529 464 308

G-090 17 21¾ 145/8 12½ x 12½ ■1050 4.0 520 420 2921550 7.6 768 700 633 472

G-095 17 21¾ 145/8 12½ x 12½ ■1050 5.4 717 569 3891550 9.6 1059 969 863 623

G-101 19 245/8 20 14½ x 14½ 12 x 12

■860 4.3 766 588 239

1725 12.1 1536 1454 1374 1181 974

G-121 19 245/8 20 14½ x 14½ ■860 5.6 922 723 449

1725 14.1 1849 1753 1659 1453 1223

G-131 22 287/8 20 18½ x 18½

16 x 16

■860 6.5 1193 1011 771

1725 19.2 2393 2310 2222 2030 1820 1555

G-141 22 287/8 20 18½ x 18½ ■860 6.8 1376 1160 919

1140 10.4 1824 1667 1498 1112

G-150 26 35½ 211/8 18½ x 18½ ■860 7.9 1772 1552 1305

1140 11.7 2348 2184 2016 1629 1115

G-160 30 35½ 215/8 20½ x 20½

18 x 18

■860 8.0 2008 1783 1535 552

1140 13.6 2662 2489 2319 1932 1411

G-170 30 35½ 215/8 20½ x 20½ 860 9.7 2572 2329 2077 1417

1140 16.3 3409 3226 3042 2647 2182 1458

G-180 30 35½ 22¾ 20½ x 20½ 860 12.1 3240 3002 2733 1978

1140 19.5 4295 4122 3933 3509 2971 2247

FansRoof Exhaust Direct Drive - G

Model G Centrifugal Roof Exhaust fans are direct drive. These fans are specifically designed for roof mounted applications

exhausting relatively clean air. Fan wheels are centrifugal, backward inclined, and constructed of aluminum.

PERFORMANCE

Performance capabilities

range from 73 cfm to

4,295 cfm and up to 1 in.

wg of static pressure.

For complete product information refer to catalog Model G and GB, or contact your local representative.

Greenheck Fan Corporation certifies that the G models shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.

■ Performance for available IN STOCK SIZES is shown on page 5

*May be greater depending on motor. All dimensions in inches.Dimension A - given is the inside dimensions of the curb cap. The roof curb should be 1½ in. less than the curb cap to allow for roofing and flashing. Performance certified is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings include the effects of a birdscreen. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: Free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

4 F A N S

F A N S

A

B

C*

13/4 in.

For complete product information refer to catalog Model G and GB, or contact your local representative.

Greenheck Fan Corporation certifies that the GB models shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.

*May be greater depending on motor. All dimensions in inches. Dimension A - given is the inside dimensions of the curb cap.The roof curb should be 1½ in. less than the curb cap to allow for roofing and flashing. Performance certified is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings include the effects of a birdscreen. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: Free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

GB CONDENSED PERFORMANCE RANGES & DIMENSIONAL DATA ■ Performance for available IN STOCK SIZES is shown on pages 8 & 9

UL/cUL 705E40001 - GB

MODEL A B C*ROOF

OPENINGDAMPER

SIZEIN STOCK SIZES (■)

MIN/MAX RPM

SONES @ 0 in.

PERFORMANCE IN INCHES WG0 .25 .5 .75 1 1.25 1.5 1.75 2.0

GB-071 19 243/8 23¾ 14½ x 14½

12 x 12

■ 600 1.2 131 681710 11.1 372 334 292 245 198

GB-081 19 243/8 23¾ 14½ x 14½ ■600 2.2 301 1751710 12.5 856 784 710 629 480

GB-091 19 243/8 23¾ 14½ x 14½ ■600 2.7 455 2711710 13.4 1295 1179 1061 934 785

GB-101 19 243/8 23¾ 14½ x 14½ ■700 3.7 593 4551800 13.2 1525 1418 1320 1208 1064 793

GB-121 19 243/8 23¾ 14½ x 14½ ■595 3.3 7211725 17.4 2093 1984 1871 1743 1600 1426

GB-131 19 283/8 23¾ 14½ x 14½ ■595 4.5 844 6551685 16.9 2391 2278 2157 2020 1857 1654

GB-141 22 283/8 23¾ 18½ x 18½ 16 x 16

■525 4.4 974 7091705 20 3163 3020 2883 2739 2574 2370

GB-161 22 283/8 23¾ 18½ x 18½ ■478 4.7 1412 10301375 21 4062 3815 3571 3304 3007 2609 2073

GB-180 30 35½ 28 20½ x 20½ 18 x 18

■495 4.3 1924 11501460 26 5677 5514 5335 5155 4938 4698 4426 4123 3765

GB-200 30 35½ 28 20½ x 20½ ■440 6.5 24341200 24 6640 6336 5968 5650 5274 4828 4177 3077

GB-220 34 42¾ 31½ 26½ x 26½ 24 x 24

330 6.6 2507985 23 7484 7212 6898 6568 6106 5547 4883

GB-240 34 42¾ 31½ 26½ x 26½ ■425 5.9 3902 3422 2691910 24 8355 7916 7467 6932 6240 5388 3707

GB-260 40 50 36 32½ x 32½ 30 x 30

270 7.7 3487835 23 10784 10292 9794 9225 8606 7932 7157 6024 4294

GB-300 40 50 36 32½ x 32½ ■300 9.3 4859 3976890 28 14416 13897 13335 12716 12072 11379 10536 9568 7963

GB-330 46 58¾ 38½ 38½ x 38½ 36 x 36

255 5.2 6159700 28 16908 16185 15408 14564 13624 12640 11538 10184

GB-360 46 58¾ 38½ 38½ x 38½ 215 4.8 5750685 30 18321 17560 16711 15773 14710 13534 12119

GB-420 52 65¼ 44 44½ x 44½ 42 x 42180 2.5 7417600 30 24724 23765 22709 21620 20103 18584 16590

GB-480 58 73¾ 47¼ 50½ x 50½ 48 x 48150 5.6 9015485 31 29148 27622 26016 24290 22106 19516

GB-500 64 83 50¾ 56½ x 56½ 54 x 54

160 5.9 12893460 33 37068 34991 32805 30342 27917 25310

GB-540 64 83 50¾ 56½ x 56½ 160 6.3 14160505 40 44694 43221 41157 38813 36503 33869 31293 26758

Roof Exhaust Belt Drive - GB

Model GB Centrifugal Roof Exhaust fans are belt drive. These fans are specifically designed for roof mounted applications

exhausting relatively clean air. Fan wheels are centrifugal, backward inclined, and constructed of aluminum. Adjustable motor

pulleys allow for final system balancing.

PERFORMANCE



44,690 cfm and up to 2.0

in. wg of static pressure.

6

F A N S

Performance certified is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings include the effects of a birdscreen. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: Free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

MODEL HP RPM TSSONES @

0 IN.MAX BHP

PERFORMANCE IN INCHES WG

0 .125 .25 .375 .5 .625 .75 1

GB-071-4X-QD-R2873-1256 RPM

1/4 HP, 115/60/1 ODP

GB-071-4X-QD-R31221-1710 RPM

1/4 HP, 115/60/1 ODP

¼

600 1757 1.2 0.006 131 68

939 2750 3.4 0.021 205 169 127

1247 3652 6.5 0.05 272 246 217 185 154 109

1556 4558 9.3 0.098 339 319 296 274 248 223 197 120

1710 5009 11.1 0.13 373 353 335 312 292 269 246 198

GB-081-4X-QD-R2873-1256 RPM

1/4 HP, 115/60/1 ODP

GB-081-4X-QD-R31221-1710 RPM

1/4 HP, 115/60/1 ODP

¼

600 1757 2.2 0.008 301 175

939 2750 4.7 0.031 470 404 330

1247 3652 7.6 0.073 625 575 525 470 403 284

1556 4558 10.8 0.14 779 740 700 660 615 571 517

1710 5009 12.5 0.19 856 821 785 748 710 669 630 511

GB-091-4X-QD-R2863-1256 RPM

1/4 HP, 115/60/1 ODP

GB-091-4X-QD-R31221-1710 RPM

1/4 HP, 115/60/1 ODP

¼

600 1757 2.7 0.011 455 271

939 2750 5.7 0.042 711 606 490 263

1247 3652 9.2 0.098 945 866 785 698 604 454

1556 4558 11.8 0.19 1179 1116 1052 988 919 848 772 504

1710 5009 13.4 0.25 1296 1238 1180 1122 1062 999 934 785

GB-101-4X-QD-R31056-1400 RPM

1/4 HP, 115/60/1 ODP

GB-101-4X-QD-R41324-1688 RPM

1/4 HP, 115/60/1 ODP

GB-101-LMDX-QD588-1800 RPM

¼

700 2039 3.7 0.020 593 455

1165 3393 6.8 0.091 987 905 830 731 578

1400 4077 8.9 0.16 1186 1117 1051 989 909 810 633

1635 4761 11.1 0.25 1385 1325 1269 1214 1161 1094 1019 792

1/3 1800 5242 13.2 0.33 1525 1471 1418 1367 1320 1270 1208 1064

GB-121-4X-QD980-1395 RPM

1/4 HP, 115/60/1 ODP


¼

595 2035 3.3 0.021 722 542

820 2804 5.2 0.054 995 877 728

1045 3574 7.3 0.111 1268 1177 1078 962 805

1395 4770 12.5 0.25 1692 1625 1557 1484 1404 1315 1214 907

1/3 1550 5300 14.6 0.33 1880 1820 1759 1696 1629 1555 1475 1289

½ 1725 5899 17.4 0.50 2093 2038 1984 1928 1871 1810 1743 1600

GB-131-4X-QD942-1315 RPM

1/4 HP, 115/60/1 ODP

GB-131-5X-QD1299-1685 RPM

1/2 HP, 115/208-230/60/1

ODP


¼

595 2044 4.5 0.024 844 655

720 2474 5.4 0.043 1022 879 650

960 3299 7.6 0.103 1362 1262 1144 990

1315 4518 13.2 0.26 1866 1794 1718 1637 1545 1435 1305

1/3 1440 4948 15.0 0.35 2044 1978 1911 1838 1759 1674 1571 1299

½ 1685 5790 16.9 0.56 2391 2335 2279 2219 2158 2093 2020 1857

GB-141-4X-QD614-865 RPM

1/4 HP, 115/60/1 ODP

GB-141-3X-QD906-1170 RPM

1/3 HP, 115/60/1 ODP

GB-141-5X-QD1049-1360 RPM

1/2 HP115/208-230/60/1

ODP


¼

525 2010 4.4 0.030 974 709

710 2718 5.7 0.074 1317 1147 908

920 3522 7.7 0.16 1706 1576 1439 1258 961

1075 4115 10.0 0.26 1994 1881 1771 1646 1489 1265

1/3 1170 4479 11.4 0.34 2170 2066 1966 1858 1733 1574 1355

½ 1360 5207 14.6 0.53 2522 2433 2346 2258 2166 2062 1942 1602

¾ 1545 5915 17.6 0.78 2866 2787 2709 2634 2556 2475 2384 2176

1 1705 6528 20 1.03 3163 3091 3020 2952 2883 2811 2739 2574

GB Performance Data - In Stock

Stock Model GB fans include galvanized birdscreen, disconnect switch, UL/cUL 705 Electrical.

Order s tock p roduc ts on l i ne a tw w w . g r e e n h e c k . c o m / q d☞

8

Performance certified is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings include the effects of a birdscreen. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: Free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

MODEL HP RPM TSSONES @ 0 IN.

MAX BHP


0 .125 .25 .375 .5 .625 .75 1 1.5 2

GB-161-4X-QD634-865 RPM

1/4 HP115/60/1 ODP

GB-161-5X-QD852-1100 RPM

1/2 HP115/208-230/60/1 ODP


¼

478 2080 4.7 0.044 1412 1030

625 2720 6.4 0.097 1846 1574 1221

865 3764 10.6 0.26 2555 2359 2162 1932 1624

1/3 945 4113 12.6 0.34 2791 2612 2433 2236 2009 1692

½ 1100 4787 15.3 0.53 3249 3094 2943 2786 2614 2428 2197

¾ 1250 5440 17.9 0.79 3692 3556 3421 3288 3149 2997 2838 2443

1 1375 5984 21 1.05 4062 3938 3815 3694 3571 3444 3304 3007 2073

GB-180-5X-QD676-940 RPM

1/2 HP115/208-230/60/1 ODP


¼ 495 2397 4.3 0.078 1924 1645 1150

730 3535 7.4 0.26 2838 2667 2469 2212 1882

1/3 810 3923 8.8 0.35 3149 2997 2832 2623 2375 2052

½ 940 4552 12.7 0.55 3655 3526 3387 3234 3052 2843 2600

¾ 1055 5109 16.2 0.77 4102 3989 3866 3741 3596 3432 3251 2811

1 1185 5739 19.0 1.1 4607 4507 4400 4290 4179 4045 3900 3575

1½ 1335 6465 22 1.54 5191 5102 5010 4912 4814 4715 4599 4343

2 1460 7071 26 1.97 5677 5595 5514 5424 5335 5245 5155 4938 4426 3765


¼ 440 2462 6.5 0.103 2434 1975

600 3357 8.5 0.26 3320 2984 2637 2088

1/3 665 3721 9.6 0.35 3679 3378 3084 2705 2087

½ 770 4308 12.1 0.55 4260 4013 3744 3477 3140 2643

¾ 860 4812 14.1 0.77 4759 4548 4289 4068 3810 3504 3085

1 965 5400 16.7 1.09 5340 5157 4927 4719 4519 4285 4015 3239

1½ 1090 6099 20 1.57 6031 5870 5681 5473 5301 5123 4924 4449

2 1200 6715 24 2.09 6640 6493 6336 6144 5968 5812 5650 5274 4177


¼ 425 2726 5.9 0.21 3902 3422 2691

460 2950 6.7 0.26 4223 3784 3188 2036

1/3 505 3239 7.8 0.35 4636 4241 3760 3059

½ 585 3752 10.3 0.55 5371 5030 4665 4194 3562 2112

¾ 660 4233 13.1 0.79 6059 5756 5449 5093 4636 4073 3217

1 730 4682 15.8 1.06 6702 6427 6157 5861 5506 5076 4567

1½ 825 5291 19.7 1.54 7574 7331 7091 6844 6573 6261 5901 5002

2 910 5836 24 2.06 8355 8134 7916 7699 7467 7214 6932 6240 3707


1/3300 2395 9.3 0.19 4859 3976

365 2914 9.2 0.35 5912 5222 4339

½ 420 3353 9.6 0.53 6803 6221 5536 4640

¾ 475 3792 11.4 0.77 7694 7197 6615 5954 5094

1 530 4231 13.4 1.07 8584 8149 7639 7094 6455 5667 4194

1 ½ 600 4790 15.9 1.55 9718 9334 8906 8445 7951 7387 6721

2 665 5309 18.8 2.12 10771 10424 10059 9648 9228 8772 8268 7025

3 760 6068 23 3.15 12310 12007 11703 11357 10996 10629 10241 9369

5 890 7106 28 5.05 14416 14157 13897 13638 13335 13027 12716 12072 10536 7963

Order s tock p roduc ts on l i ne a tw w w . g r e e n h e c k . c o m / q d☞

GB Performance Data - In Stock

Stock Model GB fans include galvanized birdscreen, disconnect switch, UL/cUL 705 Electrical.

9F A N S

H-GPF or SDCurb

B

A1.75 in.

A

C

D

A

B

A

D

1.75 in.

B

13F A N S

All dimensions in inches. Dimension A - given is the inside dimensions of the curb cap. The roof curb should be 11/2 in. less than the curb cap to allow for roofing and flashing. Performance certified is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings include the effects of a birdscreen. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: Free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

LBP BELT DRIVE CONDENSEDPERFORMANCE RANGES & DIMENSIONAL DATA

1.75 in.

E

A

C

D

A

B

MODEL LB

AC

B

A

D

1.75 in.

MODEL LBP

MODEL A B C D EROOF

OPENINGDAMPER

SIZEMIN/MAX

RPMSONES @ 0 in.

PERFORMANCE IN INCHES WG0 .125 .25 .5 .75 1

LB-10 22 x 22 28 39 17 3¼ 14½ x 14½ 12 x 12600 3.0 539 351

1767 13.5 1587 1533 1480 1385 1254 1112

LB-14 26 x 26 35 39 18 4 18½ x 18½ 16 x 16480 4.1 903 614

1343 14.4 2525 2456 2372 2199 1979 1692

LB-18 30 x 30 40 39 21 4½ 20½ x 20½ 18 x 18

465 2.7 1753 14221460 24 5505 5417 5328 5138 4936 4714

LB-21 30 x 30 43 51½ 23 6 20½ x 20½ 465 6.6 2820 2420 1732

1165 25 7066 6940 6815 6474 6124 5678

LB-24 34 x 34 45½ 51¼ 23½ 6¾ 26½ x 26½ 24 x 24355 5.8 3419 2806910 27 8763 8549 8333 7889 7377 6713

LB-30 40 x 40 50 62½ 265/8 8½ 32½ x 32½ 30 x 30230 8.0 3910 2576835 27 14194 13914 13635 13062 12432 11728

LB-36 46 x 46 60 62½ 325/8 9¾ 38½ x 38½ 36 x 36220 5.2 6204 4803678 25 19121 18770 18419 17621 16683 15636

LB-42 52 x 52 705/8 74½ 373/8 11½ 44½ x 44½ 42 x 42190 6.1 8328 6455515 24 22574 22037 21500 20214 18651 16871

LB-48 58 x 58 703/8 67 41½ 115/8 50½ x 50½ 48 x 48150 5.4 9666 6546420 23 27065 26278 25383 23363 21159 18029

LB-54 64 x 64 79½ 86½ 453/8 12½ 56½ x 56½ 54 x 54130 4.6 12159401 29 37506 36544 35583 33500 30332 26018

MODEL A B C DROOF

OPENINGDAMPER

SIZEMIN/MAX

RPMSONES @

0 in.PERFORMANCE IN INCHES WG

0 .125 .25 .5 .75 1

LBP-10 22 x 325/8 39 28 15½ 14½ x 14½ 12 x 12600 3.0 539 351

1767 13.5 1587 1533 1480 1385 1254 1112

LBP-14 26 x 26 40 32 15½ 18½ x 18½ 16 x 16480 4.1 903 614

1343 14.4 2525 2456 2372 2199 1979 1692

LBP-18 30 x 30 46 353/8 24¼ 20½ x 20½ 18 x 18

465 2.7 1753 14221460 24 5505 5417 5328 5138 4936 4714

LBP-21 30 x 30 46 36 24½ 20½ x 20½ 465 6.6 2820 2420 1732

1165 25 7066 6940 6815 6474 6124 5678

LBP-24 34 x 34 49½ 40 23½ 26½ x 26½ 24 x 24355 5.8 3419 2806910 27 8763 8549 8333 7889 7377 6713

LBP-30 40 x 40 58 46 26½ 32½ x 32½ 30 x 30230 8.0 3910 2576835 27 14194 13914 13635 13062 12432 11728

LBP-36 46 x 46 63 513/4 343/8 38½ x 38½ 36 x 36220 5.2 6204 4803678 25 19121 18770 18419 17621 16683 15636

LBP-42 52 x 52 70½ 58 38¼ 44½ x 44½ 42 x 42190 6.1 8328 6455515 24 22574 22037 21500 20214 18651 16871

LBP-48 58 x 58 76½ 64 403/8 50½ x 50½ 48 x 48150 5.4 9666 6546420 23 27065 26278 25383 23363 21159 18029

LBP-54 64 x 64 83½ 70 435/8 56½ x 56½ 54 x 54130 4.6 12159401 29 37506 36544 35583 33500 30332 26018

Low Silhouette Roof Exhaust - LB/LBP

STANDARD CONSTRUCTION FEATURES• Aluminum housing with hinged hood• Non-overloading backward inclined aluminum wheel• Curb cap with prepunched mounting holes• Motor and drives isolated on shock mounts• Birdscreen mounted to the discharge perimeter• Ball bearing motors• Adjustable motor pulley• Adjustable motor plate• Fan shaft mounted in ball bearing pillow blocks• Static free belts• Corrosion resistant fasteners• Nema-1 disconnect

OPTIONS AND ACCESSORIES • Galvanized housing• Performance baffle (Direct drive models)• Gravity and motorized dampers• Galvanized and aluminum roof curbs

(See pages 114-115)• Curb seal• Curb adaptors• Aluminum birdscreen• Speed control (Direct drive models)• Relubricatable bearings• UL/cUL 705 Electrical• Dual Drives• NEMA 3R and EXP disconnect switches• Greenheck coatings (See coatings page 117)

LB BELT DRIVE CONDENSEDPERFORMANCE RANGES & DIMENSIONAL DATA

14 F A N S

B

C*

A

13/4

"D

in.

Greenheck Fan Corporation certifies that the CUE models shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.

*May be greater depending on motor. All dimensions in inches.^Dampers should not be used in grease applications.Dimension A - given is the inside dimensions of the curb cap.The roof curb should be 11/2 in. less than the curb cap to allow for roofing and flashing.Performance certified is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: Free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.


UL/cUL 705UL/cUL 762 (size 98 and up)E40001 - CUE

MODEL A B C* DROOF

OPENINGDAMPER

SIZE ^IN STOCK SIZES (■)

MIN/MAX RPM

SONES @ 0 in.

PERFORMANCE IN INCHES WG0 .125 .25 .5 .75 1.5

CUE-060 17 183/8 13½ 113/8 10½ x 10½

8 x 8

1050 1.7 133 811550 4.2 197 164 128

CUE-065 17 183/8 13½ 113/8 10½ x 10½ 1050 2.2 180 1091550 4.7 266 222 172

CUE-070 17 183/8 13½ 113/8 10½ x 10½ 1050 2.6 250 1711550 5.5 369 325 269

CUE-075 17 183/8 13½ 113/8 10½ x 10½ 1050 3.4 287 1881550 6.0 424 359 291

CUE-080 19 21 133/8 11½ 12½ x 12½

10 x 10

1050 3.8 325 247 1331550 7.3 480 431 376 235

CUE-085 19 21 133/8 11½ 12½ x 12½ 1050 4.0 389 305 1821550 7.5 574 520 461 312

CUE-090 19 21 133/8 11½ 12½ x 12½ 1050 4.1 549 451 3061550 7.8 811 744 677 501

CUE-095 19 21 15¼ 137/16 12½ x 12½ 1050 5.3 711 570 3811550 9.6 1049 964 861 616

CUE-098 19 247/8 28¼ 173/8 14½ x 14½

12 x 12

860 8.4 588 4091725 13.8 1180 1094 1017 824 586

CUE-101 19 247/8 28¼ 173/8 14½ x 14½ ■860 4.6 732 625 481

1725 13.3 1468 1422 1373 1255 1129

CUE-121 19 247/8 28¼ 173/8 14½ x 14½ ■860 5.3 1015 905 781

1725 15.6 2037 1979 1923 1816 1710 1176

CUE-131 19 247/8 28¼ 173/8 14½ x 14½ 860 8.5 1180 1057 914

1725 18.8 2366 2305 2244 2122 1994

CUE-141 22 287/8 29¾ 193/8 18½ x 18½ 16 x 16

860 7.3 1558 1427 12641725 26 3125 3066 3005 2865 2711 2085

CUE-161 22 287/8 29¾ 193/8 18½ x 18½ ■860 10.7 2472 2315 2126 1680

1140 15.7 3277 3161 3035 2745 2421

CUE-180 30 233/8 285/8 21 20½ x 20½ 18 x 18

860 12.3 3249 3074 2922 24741140 17.6 4307 4173 4045 3822 3470

CUE-200 30 233/8 285/8 21 20½ x 20½ 860 15.7 4837 4587 4346 3815 3084

1140 24 6412 6224 6036 5674 5283 3445

Upblast Roof Exhaust Direct Drive - CUE/CUE-HP

Model CUE Centrifugal Roof Exhaust fans are direct drive. These fans are specifically designed for roof mounted applications.

Exhaust air is discharged directly upward, away from the roof surface. Fan wheels are centrifugal, backward inclined and

constructed of aluminum.

PERFORMANCE



6,410 cfm and up to 1.5


CUE CONDENSED PERFORMANCE RANGES & DIMENSIONAL DATA

For complete product information refer to catalog Series C, or contact your local representative.

16 F A N S

For complete product information refer to catalog Series C, or contact your local representative.

B

C*D

A

13/4 in.

Greenheck Fan Corporation certifies that the CUBE models shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.

*May be greater depending on motor. All dimensions in inches.^Dampers should not be used in grease applications.Dimension A - given is the inside dimensions of the curb cap.The roof curb should be 11/2 in. less than the curb cap to allow for roofing and flashing.Performance certified is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: Free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

CUBE CONDENSED PERFORMANCE RANGES & DIMENSIONAL DATA

■ Performance for available IN STOCK SIZES is shown on pages 18 & 19

UL/cUL 705UL/cUL 762MH 11745-CUBE

MODEL A B C* DROOF

OPENINGDAMPER

SIZE^IN STOCK SIZES (■)

MIN/MAX RPM

SONES @ 0 IN.


0 .25 .5 .75 1 2

CUBE-098 19 247/8 28¼ 173/8 14½ x 14½

12 x 12

■650 8.1 445

1725 13.8 1180 1017 824 586

CUBE-101 19 247/8 28¼ 173/8 14½ x 14½ ■860 4.6 732 625 481

1820 14.3 1549 1459 1350 1234 1106

CUBE-121 19 247/8 28¼ 173/8 14½ x 14½ ■685 4.4 809

1725 15.6 2037 1923 1816 1710 1571

CUBE-131 19 247/8 28¼ 173/8 14½ x 14½ 650 6.2 892

1645 17.9 2256 2128 2001 1864 1684

CUBE-141 22 29¾ 24¾ 193/8 18½ x 18½

16 x 16

■590 5.0 1069

1725 26 3125 3005 2865 2711 2539

CUBE-161 22 29¾ 24¾ 193/8 18½ x 18½ ■730 8.1 2098 1669

1390 22 3996 3806 3584 3340 3078

CUBE-180 30 353/8 285/8 21 20½ x 20½

18 x 18

■630 7.1 2380 1861

1495 28 5648 5443 5254 5082 4921 3564

CUBE-200 30 353/8 285/8 21 20½ x 20½ ■500 6.2 2812 1822

1210 25 6806 6451 6108 5748 5350

CUBE-220 34 4225/32 337/8 25½ 26½ x 26½

24 x 24

450 7.3 3585 2624

955 25 7607 7202 6799 6347 5844

CUBE-240 34 4225/32 337/8 25½ 26½ x 26½ ■410 6.4 3717 2471

930 24 8431 7985 7536 6953 6375

CUBE-300 40 50 36 29 32½ x 32½ 30 x 30 ■355 6.9 5777 4227

905 32 14727 14266 13788 13223 12614 9178

CUBE-360 46 5611/16 391/8 293/8 38½ x 38½ 36 x 36300 6.9 8092 6023

690 30 18611 17884 17115 16236 15243

CUBE-420 52 653/16 44¾ 35¼ 44½ x 44½ 42 x 42220 6.5 9353 5075

600 29 25508 24604 23451 22295 21023

CUBE-480 58 743/16 481/8 36 50½ x 50½ 48 x 48180 5.5 11016

490 24 29988 28697 27291 25704 23674

Upblast Roof Exhaust Belt Drive - CUBE

Model CUBE Centrifugal Roof Exhaust fans are belt drive. These fans are specifically designed for roof mounted

applications. Exhaust air is discharged directly upward, away from the roof surface. Fan wheels are centrifugal, backward

inclined, and constructed of aluminum. Adjustable motor pulleys allow for final system balancing.

PERFORMANCE



30,000 cfm and up to 5


Order s tock p roduc ts on l i ne a tw w w . g r e e n h e c k . c o m / q d


0 in.MAXBHP


0 .125 .25 .375 .5 .625 .75 1

CUBE-098-4G-QD1259-1725 RPM

1/4 HP, 115/60/1 ODP¼

1160 3302 9.2 0.006 793 672 522

1330 3786 10.7 0.09 909 804 689 361

1550 4412 13.0 0.14 1060 966 878 644 502

CUBE-101-4G-QD1191-1660 RPM

1/4 HP, 115/60/1 ODP

CUBE-101-3G-QD1408-1820 RPM

1/3 HP, 115/208-230/60/1 ODP

CUBE-101-LMDG-QD960-1820 RPM

¼

860 2505 4.6 0.04 732 625 481

1205 3509 7.7 0.100 1025 957 873 782 662

1660 4834 12.7 0.26 1413 1364 1313 1251 1189 1125 1056 861

1/3 1820 5300 14.3 0.35 1549 1505 1458 1406 1350 1293 1234 1106

CUBE-121-3G-QD1068-1545 RPM

1/3 HP, 115/230/60/1 ODP


¼

685 2342 4.4 0.029 808 669

845 2889 5.3 0.056 997 885 757

1045 3573 6.5 0.105 1233 1141 1053 944 798

1410 4821 11.1 0.26 1664 1594 1528 1463 1398 1315 1224 965

1/3 1545 5283 12.8 0.34 1824 1760 1698 1639 1580 1518 1441 1262

CUBE-141-5G-QD951-1400 RPM

1/2 HP, 115/208-230/60/1 ODP

CUBE-141-7G-QD1215-1595 RPM

3/4 HP, 115/208-230/60/1 ODP


¼

590 2259 5.0 0.040 1068 851

1105 4230 10.9 0.26 2001 1905 1792 1667 1515 1318 998

1/3 1210 4632 12.2 0.34 2191 2106 2006 1896 1772 1628 1442

½ 1390 5322 14.9 0.52 2517 2445 2361 2271 2173 2068 1949 1642

¾ 1595 6106 20 0.79 2889 2825 2757 2683 2601 2517 2429 2225

CUBE-161-7G-QD935-1265 RPM

3/4 HP, 115/208-230/60/1 ODP


¼ 730 3177 8.1 0.15 2098 1904 1669 1389

875 3808 11.0 0.26 2515 2361 2177 1974 1743 1364

1/3 965 4200 12.4 0.35 2774 2637 2476 2300 2109 1893 1583

½ 1110 4831 15.0 0.54 3190 3072 2940 2796 2640 2475 2297 1770

¾ 1265 5505 18.5 0.79 3636 3532 3425 3301 3172 3035 2893 2582

1 1390 6049 22 1.05 3995 3900 3806 3698 3584 3464 3340 3078


¼ 630 3051 7.1 0.16 2380 2154 1861 1403

745 3608 9.2 0.26 2814 2616 2448 2143 1763

1/3 820 3971 11.2 0.34 3097 2915 2759 2525 2257 1866

½ 940 4552 13.8 0.52 3551 3388 3243 3115 2879 2654 2363

¾ 1075 5206 16.5 0.78 4061 3919 3786 3666 3554 3344 3141 2652

1 1185 5739 18.5 1.04 4476 4347 4223 4108 4005 3903 3702 3336

1½ 1360 6586 23 1.58 5137 5025 4913 4811 4710 4620 4531 4232

2 1495 7240 28 2.10 5647 5545 5443 5345 5253 5162 5082 4921


¼ 500 2797 6.2 0.15 2812 2386 1821

605 3385 8.1 0.26 3402 3054 2674 2144

1/3 665 3721 9.4 0.35 3740 3421 3095 2699 2072

½ 760 4252 12.1 0.52 4274 3993 3718 3413 3048 2517

¾ 875 4896 16.3 0.79 4921 4676 4438 4192 3922 3626 3240

1 960 5372 18.7 1.04 5399 5175 4957 4742 4508 4253 3985 3168

1½ 1100 6155 23 1.57 6187 5991 5798 5610 5420 5216 5006 4528

2 1210 6771 25 2.09 6805 6628 6450 6279 6108 5932 5747 5349

CUBE Performance Data - In Stock

Stock Model CUBE fans include disconnect switch, UL/cUL 762 label and heat baffle.

Performance certified is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: Free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

☞

F A N S18

19F A N S

Performance certified is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: Free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.


0 in.MAX BHP


0 .125 .25 .375 .5 .625 .75 1

CUBE-240-LMDG-QD 410-930 RPM

¼ 410 2629 6.4 0.18 3716 3169 2471

465 2982 7.6 0.26 4215 3767 3187 2162

1/3 510 3271 8.9 0.34 4623 4242 3716 3134

½ 585 3752 11.5 0.51 5303 4960 4539 4093 3565

¾ 670 4297 14.3 0.79 6073 5762 5460 5052 4059 4202 3524

1 735 4714 16.6 1.04 6663 6370 6133 5764 5409 5037 4618

1½ 845 5419 19.6 1.58 7660 7399 7183 6947 6615 6304 6002 5282

2 930 5965 24 2.10 8431 8194 7985 7798 7536 7233 6953 6375


1/3355 2834 6.9 0.31 5777 5131 4226

365 2914 7.2 0.34 5939 5316 4463

½ 420 3353 9.0 0.52 6834 6314 5659 4820

¾ 480 3832 11.0 0.77 7811 7376 6844 6231 5440

1 530 4231 13.3 1.05 8624 8231 7771 7245 6636 5879

1½ 605 4830 17.0 1.56 9845 9500 9127 8705 8226 7707 7083

2 665 5309 20 2.07 10821 10508 10192 9410 8967 8495 7270

3 765 6108 24 3.15 12449 12176 11903 11607 11273 10938 10553 9743

5 905 7226 32 5.19 14727 14496 14266 14036 13788 13505 13203 12614

☞Order s tock p roduc ts on l i ne a tw w w . g r e e n h e c k . c o m / q d


.5 IN.MAXBHP


.5 .75 1 1.25 1.5 1.75 2 2.25 2.5

CUBE-141HP-LMDG-QD895-2110 RPM

¼

895 3426 6.1 0.055 330

1465 5609 14.2 0.26 1015 920 797 642

1/3 1605 6145 15.2 0.34 1146 1062 965 845 703

½ 1845 7064 17.0 0.52 1363 1292 1218 1136 1041 923 800

¾ 2110 8078 19.8 0.78 1592 1535 1472 1408 1341 1261 1178 1073 965


¼ 795 3850 8.3 0.22 1570

1/3 925 4480 10.8 0.35 2104 1687

½ 1065 5158 13.8 0.53 2581 2323 1932

¾ 1215 5884 15.0 0.79 3062 2867 2626 2286 1853

1 1335 6465 18.7 1.04 3440 3260 3075 2839 2523 2155

1½ 1530 7410 24 1.57 4034 3884 3728 3574 3375 3134 2859 2533

2 1685 8160 27 2.09 4495 4369 4225 4085 3945 3767 3574 3324 3061


½ 675 4329 9.4 0.52 3405 2606

¾ 775 4970 13.1 0.78 4232 3704 2940

1 850 5451 14.5 1.04 4811 4367 3845 3024

1½ 975 6253 18.4 1.56 5736 5386 4988 4538 4005

2 1070 6863 22 2.08 6404 6112 5774 5407 4990 4549 3624

3 1230 7889 26 3.16 7513 7279 7016 6729 6409 6090 5709 5325 4721

CUBE Performance Data - In Stock

Stock Model CUBE fans include disconnect switch, UL/cUL 762 label and heat baffle.

CUBE-HP Performance Data - In Stock

Stock Model CUBE-HP fans include disconnect switch, UL/cUL 762 label and heat baffle.

B

C*D

A

13/4 in.

23F A N S

For complete product information refer to catalog Series C, or

contact your local representative.

C

*

A

B**

Wall O

pen

ing

5 in.

Greenheck Fan Corporation certifies that the CW and CWB models shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.

*Note: 2 inches minimum. 5 inches when motorized damper is required.

CW CONDENSED PERFORMANCE & DIMENSIONAL DATA


**May be greater depending on motor. All dimensions in inches.Performance certified is for installation type A: Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.^Dampers should not be used in grease applications.

UL/cUL 705UL/cUL 762 (size 98 and up)MH11745 - CW/CWB

IN STOCK SIZES not available for High Pressure

CW HIGH PRESSURE CONDENSED PERFORMANCE & DIMENSIONAL DATA

MODEL A B** CWALL

OPENINGDAMPER

SIZE^IN STOCK SIZES (■)

MIN/MAX RPM

SONES @ 0 in.

PERFORMANCE IN INCHES WG0 .125 .25 .5 .75 1.5

CW-060 183/8 13½ 14¾ 8½ x 8½

8 x 8

1050 1.7 133 811550 4.2 197 164 128

CW-065 183/8 13½ 14¾ 8½ x 8½ ■1050 2.2 180 1091550 4.7 266 222 172

CW-070 183/8 13½ 14¾ 8½ x 8½ ■1050 2.6 250 1711550 5.5 369 325 269

CW-075 183/8 13½ 14¾ 8½ x 8½ ■1050 3.4 287 1881550 6.0 424 359 291

CW-080 21 133/8 177/8 10½ x 10½

10 x 10

■1050 3.8 325 247 1331550 7.3 480 431 376 235

CW-085 21 133/8 177/8 10½ x 10½ ■1050 4.0 389 305 1821550 7.5 574 520 461 312

CW-090 21 133/8 177/8 10½ x 10½ ■1050 4.1 549 451 3061550 7.8 811 744 677 501

CW-095 21 15¼ 177/8 10½ x 10½ ■1050 5.3 711 570 3811550 9.6 1049 964 861 616

CW-098 247/8 28¼ 19¾ 12½ x 12½

12 x 12

860 8.4 588 4091725 13.8 1180 1094 1017 824 586

CW-101 247/8 28¼ 19¾ 12½ x 12½ ■860 4.6 732 625 481

1725 13.3 1468 1422 1373 1255 1129

CW-121 247/8 28¼ 19¾ 12½ x 12½ ■860 5.3 1015 905 781

1725 15.6 2037 1979 1923 1816 1710 1176

CW-131 247/8 28¼ 19¾ 12½ x 12½ 860 8.5 1180 1057 914

1725 18.8 2366 2305 2244 2122 1994

CW-141 287/8 29¾ 221/8 15½ x 15½ 15 x 15

■860 7.3 1558 1427 1264

1725 26 3125 3066 3005 2865 2711 2085

CW-161 287/8 29¾ 221/8 15½ x 15½ 860 10.7 2472 2315 2126 1680

1140 15.7 3277 3161 3035 2745 2421

CW-180 353/8 285/8 27¾ 17½ x 17½ 17 x 17

860 12.3 3249 3074 2922 24741140 17.6 4307 4173 4045 3822 3470

CW-200 353/8 285/8 27¾ 17½ x 17½ 860 15.7 4837 4587 4346 3815 3084

1140 24 6412 6224 6036 5674 5283 3445

MODEL A B** CWALL

OPENINGDAMPER

SIZE^MIN/MAX

RPMSONES @ .5 in.


.5 .75 1 1.25 1.5 1.75 2

CW-161HP 287/8 29¾ 221/8 15½ x 15½ 15 x 151140 12.5 1645 1444 1175

1725 22 2787 2680 2560 2439 2310 2167 2003

CW-180HP 353/8 285/8 273/4 17½ x 17½ 17 x 17 1725 28 4613 4493 4353 4215 4078 3914 4340

Sidewall Exhaust - CW/CW-HP/CWB/CWB HPThese fans are ideal for exhausting contaminated air out and away from buildings. Fan wheels are centrifugal, backward inclined, and constructed of aluminum.

Model CW Sidewall Exhaust fans are the centrifugal direct drive type.

Model CWB Sidewall Exhaust fans are the centrifugal belt drive type. Adjustable motor pulleys allow for final system balancing.

PERFORMANCECW performance capabilities range from 70 cfm to 3,277 cfm and up to 1.5 in. wg of static pressure.

CWB performance capabilities range from 258 cfm to 12,449 cfm and up to 2.75 in. wg of static pressure.

CWB PERFORMANCE DATA - IN STOCK

Order s tock p roduc ts on l i ne a tw w w . g r e e n h e c k . c o m / q d

Stock model CWB fans include birdscreen, disconnect switch, UL/cUL762 and heat baffle.

Stock Model CW fans include birdscreen, disconnect switch, UL/cUL 705 label.☞

MODEL RPM TSSONES @

0 in.MAXBHP


0 .125 .25 .375 .5 .625 .75

CW-065-DGEX-QD1/30 HP3 Speed

E 1050 2234 2.2 .009 180 109

G 1300 2765 3.2 .017 223 170 97

D 1550 3297 4.8 .028 266 222 172 95


E 1050 2234 2.5 .008 250 172

G 1300 2765 4.1 .015 309 255 152

D 1550 3297 5.6 .026 369 325 269 160


E 1050 2234 3.3 .012 287 188

G 1300 2765 4.4 .024 356 279 185

D 1550 3297 6.1 .039 424 359 291 204


E 1050 2990 3.8 .016 325 248 133

G 1300 3701 5.4 .031 403 343 272 173

D 1550 4413 7.3 .054 480 431 376 315 236


E 1050 2990 3.6 .018 389 305 182

G 1300 3701 5.4 .035 482 416 340 235

D 1550 4413 7.5 .061 574 520 462 395 313 161


E 1050 2990 3.8 .027 550 450 306

G 1300 3701 5.4 .052 680 600 516 391

D 1550 4413 7.5 .088 811 744 677 603 501 347

CW-095-DGEX-QD1/8 HP

3 Speed

E 1050 2990 4.9 .037 711 569 381

G 1300 3701 7.4 .072 880 773 641 484 200

D 1550 4413 9.6 .121 1049 964 861 746 616 443

CW-101-BX-QD1/6 HP

B 1140 3320 7.2 0.09 970 896 806 707

CW-121-BX-QD1/6 HP

B 1140 3898 7.4 0.14 1346 1260 1179 1091 980 833

CW-141-BX-QD1/4 HP

B 1140 4364 11.3 0.29 2064 1972 1864 1744 1604 1429 1166


0 inMAX BHP


0 .125 .25 .375 .5 .75 1 1.25 1.5 1.75

CWB-141-LMDG-QD590-1590 RPM

¼ 590 2259 7.3 0.04 1069 851

1090 4173 10.7 0.25 1975 1877 1763 1633 1476

1/3 1200 4594 12.1 0.34 2174 2088 1987 1875 1749 1410

½ 1400 5360 15.2 0.53 2537 2465 2382 2292 2196 1974 1675

¾ 1590 6087 19.9 0.78 2881 2817 2748 2674 2592 2420 2213 1952

1 1725 6605 26 1.0 3125 3066 3005 2936 2865 2711 2539 2339 2085 1704

CWB-180-LMDG-QD545-1480 RPM

¼ 740 3584 9.1 0.25 2795 2596 2422 2115 1723

1/3 830 4019 11.4 0.36 3135 2954 2799 2575 2315

½ 960 4649 14.2 0.55 3626 3466 3323 3197 2981 2487

¾ 1070 5182 16.4 0.77 4042 3898 3765 3645 3533 3113 2613

1 1200 5811 18.8 1.08 4533 4405 4281 4168 4066 3778 3411 2948

1½ 1360 6586 22 1.58 5137 5024 4911 4809 4710 4531 4229 3909

2 1480 7168 26 2.03 5591 5487 5383 5284 5193 5021 4845 4517

CW PERFORMANCE DATA - IN STOCK

25F A N S

Performance certified is for installation type A: Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

Sidewall Exhaust - CW/CW-HP/CWB/CWB HP

Performance certified is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

26 F A N S

For complete product information refer to catalog Model RSF & RSFP, or contact your local representative.

Greenheck Fan Corporation certifies that the RSF/RSFP models shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program.

RSF STANDARD CONDENSED PERFORMANCE & DIMENSIONAL DATA

B

C

2A 1/2 in.

RSF

BL

CL

2A

1/2 in.

RSFP

UL/cUL 705

E40001 - RSF

MODEL A (Sq.) B (Sq.) CRECOMMENDED ROOF OPENING

DAMPER SIZE

CFMPERFORMANCE IN INCHES WG

.125 .25 .5 1 1.5 2

RSF-90 26 351/8 25¼ 15 x 15 12 x 12

650 435 569

1530 707 783 924 1172 1385

2300 994 1048

RSF-100 30 411/8 25¼ 17 x 17 14 x 14

700 377 505

2500 796 852 957 1146 1314 1468

3400 1052 1089

RSF-120 34 471/8 27¼ 21 x 21 18 x 18

1150 330 430

3220 615 664 760 930 1079 1213

4600 844 877

RSF-150 40 531/8 31¼ 23 x 23 20 x 20

1625 274 363

4730 516 588 641 784 913 1030

6800 708 739

RSF-180 46 611/8 34¼ 29 x 29 26 x 26

2450 241 317

7220 478 516 581 691 799 901

10400 665 687

RSF-200 52 731/8 39¼ 33 x 33 30 x 30

2900 200 266

11260 488 509 553 639 719 794

14300 609 626

Roof Supply Fans - RSF/RSFP

Models RSF and RSFP are roof mounted, filtered supply fans designed to provide efficient and economical make-up air.

Galvanized steel housings are designed for maximum airflow and weather protection.

PERFORMANCE


range from 650 to 14,300

cfm and up to 2 in. wg of

static pressure.

All dimensions in inches. Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (BHP/kW) does not include transmission losses. Performance ratings include the effects of 1 in. aluminum filters.

B

A D

C

E

29F A N S

Supply Air Fan - SAF

STANDARD CONSTRUCTION FEATURES• Heavy gauge galvanized steel housing

• Double width, double inlet forward curved wheel

• Removable cover allows complete accessibility to blower assembly• 1 inch washable aluminum filters, easily removable for cleaning• Vibration isolation for entire blower assembly• AMCA Certified Ratings Seal for Sound and Air Performance• Mounted and wired Nema-1 disconnect switch• Lifting lugs• Energy efficient motor• UL/cUL 705 Electrical

OPTIONS AND ACCESSORIES • Duct adaptors (In Stock)• Curb adaptors• Gravity and motorized dampers (In stock)• High velocity supply dampers• Galvanized roof curbs (In stock)• Aluminum roof curbs (See pages 114-115)• Curb extensions• Replacement filter sets• Curb seal• Curb adapter/reducer

SAF PERFORMANCE DATA - IN STOCK IN STOCK SIZES are galvanized steel construction and include washable aluminum filters. UL/cUL 705.

MODEL CFM OVMAXBHP

PRESSURE IN INCHES WG

.125 .25 .5 1 1.5 2 2.5 3

SAF-110-LMDX-QD

820 877 0.08 RPM 432 549

1180 1263 0.22 RPM 525 616 780

1540 1658 0.55 RPM 632 707 844 1082

1900 2033 1.02 RPM 745 809 927 1140 1328

2260 2418 1.05 RPM 859 920 1023 1210

2620 2803 0.97 RPM 977 1032

SAF-112-LMDX-QD

1250 1850 0.11 RPM 390 483

1750 2590 0.31 RPM 459 549 682

2250 3330 0.49 RPM 549 615 745

2750 4070 1.04 RPM 647 698 810 990

3250 4810 1.45 RPM 748 790 880 1063

3750 5550 1.5 RPM 849 888 962

SAF-115-LMDX-QD

1300 2717 0.23 RPM 316 407 546

2000 4180 1.05 RPM 387 463 586 781 934

2700 5643 1.89 RPM 479 534 642 821 970 1098

3400 7106 1.91 RPM 577 621 712 870 1011

4100 8569 2.04 RPM 677 717 785 935

4800 10032 1.96 RPM 780 815

SAF-118-LMDX-QD

2500 7400 0.37 RPM 294 359 466

3700 10952 1.67 RPM 376 426 516 664 800

4900 14504 4.46 RPM 466 508 582 713 828 932 1034 1127

6100 18056 4.73 RPM 563 594 661 775 878 973 1059

7300 21608 4.63 RPM 662 688 744 846 939

8500 25160 4.64 RPM 760 786 831

Performance certified is for Model SAF exhaust for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings include the effects of filters in the airstream.

The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free fi eld calculated per AMCA Standard 301. Values shown are for installation type A: Free inlet fan sone levels.

☞Order s tock p roduc ts on l i ne a tw w w . g r e e n h e c k . c o m / q d

31F A N S

KSFD and KSFB - Arr. DB3

B

A

10 ft.min.

B

A

A

B

10 FT. HORIZONTAL SEPARATION COMBINATION PACKAGE - EXTENDED WEATHERHOOD

3 FT. VERTICAL SEPARATION COMBINATION PACKAGE - STANDARD WEATHERHOOD

A

B 3 ft.min.

STAND ALONE - EXTENDED WEATHERHOOD

All dimensions are in inches.*Maximum dimensions (dependent on CUBE fan).

KSFD and KSFB - Arr. DBC

Dimensions are in inches and include mixing box and standard weatherhood. For roof opening dimensions and locations refer to factory submittal.

Consult your representative for dimensional data when the evaporative cooling option is selected.

Housing Size A B Width

H05 172 15 20

H08 166 15 37

H15 146 23 32

H25 153 30 41

KSFD and KSFB - Arr. DB

Housing Size A* B* Width*

H05 71 50 25

H08 83 53 36

H15 132 55 43

H25 165 67 59

Housing Size A* B* Width*

H05 201 50 25

H08 208 53 36

H15 197 55 43

H25 218 67 59

All dimensions are in inches.


H05 41 15 20

H08 41 15 37

H15 81 23 32

H25 100 30 41


H05 32 19 20

H08 32 19 37

H15 72 26 32

H25 82 34 41

KSFD and KSFB - Arr. Hz

KSFD and KSFB - Arr. DBB

A

DBHz.

STAND ALONE - STANDARD WEATHERHOOD

Make-Up Air Systems - KSFD & KSFB

All dimensions are in inches.*Maximum dimensions (dependent on CUBE fan).

All dimensions are in inches.

Fans - literature.puertoricosupplier.comliterature.puertoricosupplier.com/001/MA371.pdf · The...

Documents

Transcript of Fans - literature.puertoricosupplier.comliterature.puertoricosupplier.com/001/MA371.pdf · The...