fallarrest catalogue, CosmoPetra, CMCO
-
Upload
safe-lifting-solutions -
Category
Documents
-
view
101 -
download
1
description
Transcript of fallarrest catalogue, CosmoPetra, CMCO
CosmoPetra
Safe Lifting Solutions
Cosmo Petra
Hisham El Banna Chairman Cairo : 127 Ramsis St. Tel : 002 02 5914286 Alex : 13 Edmon Fermon St. Tel : 002 03 4266445 Semouha fax : 002 03 4242563 Mob : +2 010 0033933 Hot line : +2 010 9122744 E-mail : [email protected] Web Site : www.cpworks-eg.com
– Personal Protective Equipment – PPE
Harness and Fallarrest Systems Rescue- and Descending Systems
Catalogue October 2012
Industrial Products GmbH
2
The brands
Yale is the leading brand for standard manual hoisting
equipment in Europe. As early as 1877, Yale produced
the first spur-geared hand chain hoist incorporating
the Weston screw-and-disc type load brake – a design
principle which is still used today. In 1936, hoist manu-
facture started in Velbert with the production of the world
renowned PUL-LIFT®.
The product range as well as all new and further develop-
ments of Yale in the individual product sectors constantly
raise the benchmark for quality,
reliablity and safety.
The comprehensive range of products
includes hoists, cranes, load hoisting
tackles and crane weighers, balancers,
textile lifting and lashing equipment
and personal protection equipment,
material handling equipment and
load moving systems, hydraulic tools,
bolting technology as well as workshop
equipment. The prominently yellow
products, which are delivered ready for
operation, are used world-wide for the
most varied industrial and commercial
applications.
Pfaff-silberblau – the name of this company with its long-
standing tradition and history of more than 140 years has
become the synonym for power, dynamics and safety.
Hoists, material handling equipment as well as rope
winches and rack and pinion jacks of the Pfaff-silberblau
brand are used wherever high loads need to be lifted,
turned or moved in an environment with demanding
safety requirements.
In logistics,
industrial production
or outdoor applica-
tions, the innova-
tive products and
application-specific
designs with their
unique silver blue
finish provide the
solution to
numerous lifting
applications.
3
The company
Industrial Products GmbH
Yale has already been a successful partner within the
international corporate network of Columbus McKinnon
Corporation (CMCO) for ten years.
Since 2008, Pfaff-silberblau has extended the portfolio of
products and services of the company.
Today, the two trademarks of Yale and Pfaff-silberblau
are combined under the name of Columbus McKinnon
Industrial Products GmbH. As partners, we present a
comprehensive range of products whereby each individual
product fulfills the wide variety of our customers’ require-
ments with regards to performance, quality and efficiency.
Experience, know-how and innovative strength combined
with a far-reaching understanding of user requirements is
the formula for success on which our portfolio of hoisting
and material handling equipment products has been
based for a long time. Our tradition of close customer
relationships and customer services as well as our con-
stant striving for optimisation provide the basis for all new
and further developments of the Yale and Pfaff-silberblau
brands.
As a premium supplier of two leading brands, we have set
ourselves the target of offering our customers world-wide
high-quality hoisting and material handling equipment that
is designed for moving, lifting, positioning and securing
heavy loads both ergonomically and safely.
Columbus McKinnon Industrial Products GmbH is a
subsidiary of Columbus McKinnon Corporation (CMCO),
Amherst/USA, one of the world’s leading providers of
material handling equipment. CMCO has more than
130 years experience in developing and producing
cranes, hoists and lifting tackles. Today, the company has
more than 2500 employees world-wide.
More information about Columbus McKinnon Industrial
Products as well as the brands Yale and Pfaff-silberblau is
available on the Internet at www.cmco.eu, www.yale.de
and www.pfaff-silberblau.com
Industrial Products GmbH
4
Training We offer many different training seminars in our training
centres in Velbert and Kissing. The centres offers not only
product training but also seminars providing up-to-date
insider information and a consolidated knowledge in the
usage of rope, lifting and lashing practices.
Modern communication technologies, hands-on experi-
ence and well designed training documentation guarantee
a quick and lasting training success.
As required all training seminars can also be held at other
locations. Seminars on special themes on request.
Certificate Mr. Max Mustermann World Industries Globe Street 4 - 8 54321 Velbert
On 30th of January 2012, with success Mr. Max Mustermann
has been participated on a course being a qualified person to
inspect PPE against fall from heights due to EN 365.
He was educated in:
• Fall arrest, restraint and rescue systems
• Compliance of using and installation instructions
• Anchoring systems and PPE against fall products
• EN standards, CE-certification, basics of rules and laws
• Accident prevention and emergency management
• Storage, maintenance and recognition of losses
• Operating instructions and government insurance
This training does not authorize the revision of closed retractable
height safety and rescue equipment.
Velbert, 30th of January 2012
COLUMBUS McKINNON Industrial Products GmbH
Manager PPE Training
Certificate Mr. Max Mustermann World Industries
Globe Street 4 - 8 54321 Velbert
has participated in
a technical expert training course
at the 30th of January 2011
Hoisting Equipment
He was trained according to BGV D8.
Velbert, 30th of January 2011
COLUMBUS McKINNON Industrial Products GmbH
Manager Training
Training • to become a “competent person“ for the inspection of
Yale and Pfaff-silberblau hoisting equipment according
to UVV BGV D8
• becoming a competent person due to EN 365 to
inspect ppe against fall from height yearly
• annually high rescue training and instruction in using
ppe against fall and rescue systems correctly
Target group
Members from all industrial areas
• who are entrusted with the inspection, service and
repair of hoisting equipment.
• who are entrusted with the use and inspection of PPE.
5
hs,
m
1 / 3
Our service for you: Qualified personnel as well as specialised dealers
provide competent know-how and service.
Columbus McKinnon logistics with worldwide distribution
allows short lead times and international availability.
Business hours: Monday - Thursday 08:00 a.m - 04:00 p.m
Friday 08:00 a.m - 03:00 p.m
Shipping:
Monday - Thursday 07:00 a.m - 12:00 a.m and
Product documentation Every unit is supplied with operating instructions,
CE declaration of conformity resp. manufactures works
test certificate, which confirms the perfect tested status
of the product.
Additional documentation, e.g. spare parts manuals or
maintenance and repair instructions are available on
request or at our homepage.
www.cmco.eu Electric Chain Hoist
Model CPV/F Capacity 250 kg - 2.000 kg
Translated Operating- and
Maintenance Manual
12:30 p.m - 04:00 p.m
Friday 07:00 a.m - 02:00 p.m
COLUMBUS McKINNON
Industrial Products GmbH
Postfach 10 13 24 •
D-42513 Velbert, Germany
Am Lindenkamp 31 • D-
42549 Velbert, Germany
Phone +49 (0) 20 51/600-0
• Fax +49 (0) 20 51/600-127
Ident.-No.:
09901000/04.2011
D Original Betriebsanleitung
(Gilt auch für
Sonderausführungen)
GB Translated Operating Instructions
(Also applicable for
special versions)
F Traduction de mode
d’emploi (Cela s‘applique aussi
aux autres versions)
Stirnradflaschenzug
Hand chain hoist
Palan à main
Mod.
Columbus McKinnon Industrial
Products GmbH Postfach 10 13 24
• D-42513 Velbert, Germany Am
Lindenkamp 31 • D-42549 Velbert,
Germany
+49 20 51/600-0 • Fax +49 20 51/600-127
Ident.-No.:
09901076/08.2011
Werksbescheinigung nach EN 10204 - 2.1
Certificate of compliance for EN 10204 - 2.1
Attestation de conformité selon EN 10204 - 2.1
Certificado de prueba según EN 10204 - 2.1
Fabrikanten verklaring volgens EN 10204 - 2.1
Certificato di conformitá con EN 10204 - 2.1
Försäkran i enlighet med EN 10204 - 2.1
Atest zgodnosci z EN 10204 - 2.1
CERTIFICATE
This is to certify that
Columbus McKinnon Industrial Products GmbH
Am Lindenkamp 31
42549
Velbert
Germany
DIN EN ISO 9001 Columbus McKinnon Industrial Products GmbH
with the organizational units/sites as listed in the annex
has implemented and maintains a Quality Management System.
Scope:
Design and development, manufacture and distribution of
hoisting equipment, pallet trucks & stackers, hydraulic
jacks & tools, load lifting attachments, crane weig round & flat
webbing slings, ratchet lashing systems and maintenance &
service
Through an audit, documented in a report, it was verified that the
management syste fulfills the requirements of the following
standard:
ISO 9001 : 2008
CERTIFICATE IQNet and
DQS GmbH Deutsche Gesellschaft zur Zertifizierung von
Managementsystemen hereby certify that the company
Columbus McKinnon Industrial Products GmbH
Am Lindenkamp 31
42549 Velbert, Germany
with the organizational units/sites as listed in the annex
has implemented and maintains a Quality Management System.
Scope:
manufactures world wide according to uniform, controlled
standards of DIN EN ISO 9001.
This is a guarantee for our business partners that given
standards in design and development, manufacturing,
Date of certification
2011-
07-27
Design and development, manufacture and distribution of hoisting equipment, pallet trucks & stackers,
hydraulic jacks & tools, load lifting attachments, crane weighs,
round & flat webbing slings, ratchet lashing systems and maintenance & service
fulfills the requirements of the following standard:
assembly and service are complied with.
Certificate registration no.
000151 QM08
Through an audit, documented in a report, it was verified that the management system
Valid until
DQS GmbH
2013-
09-01 ISO 9001 : 2008
Date of certification
2011-07-27 Valid until
2013-09-01
Registration Number: 000151 QM08
Michael
Drechsel
Managin
g
Director
Jan Böge
Managin
g
Director
Michael Drechsel Jan Böge
Accredited Body: DQS GmbH, August-
Schanz-Straße 21, 60433 Frankfurt am Main
President of IQNet Managing Director of DQS GmbH
IQNet Partners*:
AENOR Spain AFNOR Certification France AIB-Vinçotte
International Belgium ANCE Mexico APCER Portugal CCC
Cyprus CISQ Italy CQC China CQM China CQS Czech
Republic Cro Cert Croatia DQS Holding GmbH Germany DS
Denmark ELOT Greece FCAV Brazil FONDONORMA
Venezuela ICONTEC Colombia IMNC Mexico
Inspecta Certification Finland IRAM Argentina JQA Japan KFQ Korea MSZT Hungary Nemko AS Norway
NSAI Ireland
PCBC Poland Quality Austria Austria RR Russia SII Israel SIQ Slovenia SIRIM QAS International
Malaysia
SQS Switzerland SRAC Romania TEST St Petersburg Russia TSE Turkey YUQS Serbia
IQNet is represented in the USA by: AFNOR Certification, CISQ, DQS Holding GmbH and NSAI Inc.
* The list of IQNet partners is valid at the time of issue of this certificate. Updated information is available under www.iqnet-certification.com
Certified since November 1991
6
Personal Protective Equipment User information
This user information presents a general review re-
garding the application of personal protective equip-
ment and does not substitute the existing operating
instructions for specific products!
Personal protective equipment may be used by a
competent operator (trained in theory and practice)
only.
When operated correctly, our personal protective
equipment will offer the highest degree of safety in
line with long life expectancy and avoid damage to
products and people.
Limitations of application
Utilization period
The utilization period is dependent on the respective
conditions of use; observe the information given in the
operating instruction. Textile fabric straps and fasteners
are subject to a certain ageing process even without op-
erational demands which depend especially on ultraviolet
radiation as well as climatic and other environmental
influences. On account of this imponderability, specific
information cannot be given. However, the information
given in the manfucaturer’s operating instructions are to
be observed.
Temperature
Textile fabric must be protected from temperatures above
60 °C. Observe any melting on straps. In such cases, a
competent person should be consulted prior to next using
the equipment.
Application advices
Obligations of employees
• Utilisation of personal protective equipment
(personal responsibility).
• Prior to each use, the insured users should visually
check the equipment for perfect condition and proper
function.
• Do not perform any modifications to the equipment.
• Inspection of personal protective equipment for obvious
deficiencies, defective parts (open seams, fissures,
etc.).
Maintenance, cleaning and repair The contractor has to arrange that defective parts of
personal protective equipment are replaced only by
spares which correspond to the original parts. After the
end of the work, the fall arrest equipment should be
cleaned from dirt with warm water up to 30 °C and a mild
washing agent, dry in the shade. Lubricate moving parts
of the metal connections if necessary. Personal fall arrest
equipment must not be stored under influences, which
can negatively affect the safe condition. These are:
• Store in a dry, ventilated and not too warm place
• Do not dry in the vicinity of radiators
• Do not expose the harness to aggressive elements, e.g.
acids, alkaline, soldering water or oil.
• The equipment should be protected from direct light
effect and UV radiation.
7
Personal Protective Equipment User information
Inspections – 3-level-check • Prior to and after each use the personal protective
equipment should be inspected for obvious
deficiencies.
• The equipment has to be checked for obvious failures
during utilisation.
• Annual inspection and mandatory documentation of
the result.
Inspection of the general state of the PPE
regarding:
• Completeness
• Correct configuration
• Age
• Existing CE identification marking
• Identification of manufacturer
• ID number (serial number, charge number etc.)
• Contamination, staining
• Traces of detrimental chemical or thermal
influences
• Signs of manipulation
The contractor is responsible to have personal protective
equipment inspected according to the operating condi-
tions and internal requirements at least once per year by
a competent person in order to certify proper state and
function. Inspections have to be recorded and must be
available during the full period of utilisation.
Inspection after use
Personal protective equipment that has been used in a fall
must be first taken out of use and must then be inspected
by a competent person before further use. Repairs must
only be carried out by a competent person.
For detailed information on
training please see internet
www.yale.de
8
Personal Protective Equipment Harnesses
Pos. Model EAN-No. 4025092*
Weight kg
Product group
Cat. page
1 AFG-30 N *471077 1.0 370 264
2 AFG-30 HV *471206 1.0 370 264
3 AFG-30 HV+C *605847 1.0 370 264
Harness model AFG-10 Conform to EN 361
• Provided with rear D-attachment point and chest lock.
• Adjustment in the shoulder and chest area to provide easy and quick fit to the size of the user.
• Model AFG-10 F for women with front vest and click-closing.
• Model AFG-10 R with additional rescue anchor point.
Pos. Model EAN-No.
4025092* Weight
kg Product group
Cat. page
1 AFG-10 *164610 0.8 370 264
2 AFG-10 F *471138 1.0 370 264
3 AFG-10 R *164634 1.5 370 264
Model AFG-10 F Model AFG-10
Model AFG-10 R
Harness model AFG-20 Conform to EN 361, EN 358
• Provided with rear D-attachment point and chest lock.
• Two lateral D-rings for work positioning.
• Padded back for optimal wearing comfort.
• Adjustment in the shoulder and chest area to provide easy and quick fit to the size of the user.
Pos. Model EAN-No.
4025092* Weight
kg Product group
Cat. page
1 AFG-20 *164658 1.4 370 264
Harness model AFG-30 Conform to EN 361
• Attachment points in the back and in the chest area.
• Model AFG-30 N, black with special non flammable textile webbing.
• Model AFG-30 HV including yellow high visible vest and 0,4 m band extension at the back
• Model AFG-30 HV+C including yellow high visible vest, click-closing in the leg area and 0.4 m band extension at the back attachment.
• Adjustment in the shoulder and chest area to provide easy and quick fit to the size of the user.
Model AFG-30 HV+C
9
Personal Protective Equipment Harnesses
Pos. Model EAN-No. 4025092*
Weight kg
Product group
Cat. page
1 AFG-32 PRO *930277 1.4 370 265
2 AFG 22 PRO *381000 1.4 370 –
Pos. Model EAN-No. 4025092*
Weight kg
Product group
Cat. page
1 AFG-35 *164627 1.1 370 265
2 AFG-35 B04 *470971 1.3 370 265
3 AFG-40 A *470957 1.1 370 265
Pos. Model EAN-No. 4025092*
Weight kg
Product group
Cat. page
1 AFG-56 *164672 1.6 370 265
2 AFG-56 C *165297 1.6 370 265
Harness model AFG-32 PRO and model AFG 22 PRO Conform to EN 361
• Attachment points in the back and in the chest area.
• Click-closing in the leg and in the chest area.
• Fall indicator
• Inclusive comfortable padded leg and shoulder straps.
• Adjustment in the shoulder and chest area to provide easy and quick fit to the size of the user.
Model AFG 22 PRO
Model AFG-32 PRO
Harness model AFG-35 and model AFG-40 Conform to EN 361
• Attachment points in the back and in the chest area.
• Model AFG-35 B with 0.4 m band with loop fixed at the back attachment point.
• Model AFG-40 A with stainless steel fittings.
• Adjustment in the shoulder and chest area to provide easy and quick fit to the size of the user.
Model AFG-35
Model AFG-35 B04
Harness model AFG-56 Conform to EN 361, EN 358
• Attachment points in the back and in the chest area.
• Two lateral D-rings for work positioning.
• Padded back for optimal wearing comfort.
• Model AFG-56 C with click-closing at the waist belt and at the leg area.
• Adjustment in the shoulder and chest area to provide easy and quick fit to the size of the user.
Model AFG-56
Model AFG-56 C
Personal Protective Equipment Harnesses
10
Pos. Model EAN-No. 4025092*
Weight kg
Product group
Cat. page
1 AFG-70 *164733 1.7 370 266
2 AFG-70 C *946933 1.7 370 266
3 AFG-71 C *634526 1.7 370 266
4 AFG-80 *626712 1.7 370 266
5 AFG-81-C *381017 1.7 370 –
Harness model
AFG-70,
model AFG-70 C,
model AFG-71 C and
model AFG-80/81-C Conform to EN 361, EN 358, EN 813
• Attachment points in the back and in the chest area.
• Two lateral D-rings for work positioning.
• Additional ventral descending point at the waist.
• Padded back and legs for optimal wearing comfort.
• Model AFG-70 C, model AFG-71 C and model AFG-80/81-C with click-closing at the leg area.
• Adjustment in the shoulder and chest area to provide easy and quick fit to the size of the user.
Model AFG-70
Model AFG-71 C
Model AFG-81-C
Model AFG-80
Accessories for sit harness
Pos. Model EAN-No. 4025092*
Weight kg
Product group
Cat. page
1 Sit board *932806 0.5 370 266
2 Wooden sit board with padded back *932837 1.0 370 266
Sit board
Sit harness model SG-30 Conform to EN 358
• With sliding-D in front at the leg area with optimal motion comfort for tree working.
• Click-closing at the legs for easy taking on and off.
Wooden sit board with padded back
Pos. Model EAN-No.
4025092* Weight
kg Product group
Cat. page
1 SG-30 *470896 1.8 370 266
11
Personal Protective Equipment Harnesses & door anchor
Special harnesses for
mobile-, wind- and energy industries Conform to EN 361, 358
• Attachment points in the back and in the chest area.
• Two lateral D-rings for work positioning.
• Padded back for optimal wearing comfort with additional equipment loops.
• Adjustment in the shoulder and chest area to provide easy and quick fit to the size of the user.
• Model AFG-85-C with complete click-closing for rapid taking on and off.
• Model AFG-110 with a complete clasp type buckle closing at the waist belt and the legs.
• Model AFG-EDS-C with click-closing at the legs and a clasp type buckle closing at the waist belt.
• Model AFG-51-JS with insulated side fittings and 2 attachment loops in the chest area; without climbing D-rings.
Model AFG-110
Model AFG-85-C
Pos. Model EAN-No. 4025092*
Weight kg
Product group
Cat. page
1 AFG-85-C *470933 1.6 370 267
2 AFG-110 *280693 1.7 370 267
3 AFG-EDS-C *625043 1.6 370 267
4 AFG-51-JS *645997 1.5 370 –
Model AFG-EDS-C
Door anchor model TTV Conform to EN 795 class B
• Model TTV-1 steel anchor beam.
• Model TTV-2 aluminium anchor beam incl. carrying bag.
• AP-062 Alu-set including a special adapter to install it in roof windows together with model TTV-2 and incl. a carrying bag.
Model TTV-1
Pos. Model EAN-No.
4025092* Weight
kg Adjustment range
mm Dimensions
mm Product group
Cat. page
1 TTV-1 *165174 6.9 350 - 1240 1415 x 150 x 100 370 267
2 TTV-2 *288491 3.2 300 - 1270 1450 x 122 x 100 370 267
3 AP-062 Alu-set *288675 6.7 – 1450 x 300 x 200 370 –
12
Personal Protective Equipment Lanyards
Restraint rope lanyard, non-adjustable, model VBM-K Conform to EN 354
• Universal safety lanyard without energy absorber.
• Kernmantle - rope diameter 12 mm
• End connections: 1 x screw gate snap hook, opening 18 mm, 1 x standard snap hook, opening 18 mm.
Pos. Model EAN-No.
4025092* Length
m Weight
kg
Product group
Cat. page
1 VBM-K *165310 2.0 0,5 370 268
Restraint rope lanyard, non-adjustable, model VBM-R Conform to EN 354
• Universal safety lanyard without energy absorber.
• Kernmantle-rope diameter 12 mm
• End connections: 1 x scaffold hook, opening 60 mm, 1 x standard snap hook, opening 18 mm.
Pos. Model EAN-No.
4025092* Length
m Weight
kg
Product group
Cat. page
1 VBM-R *164948 2.0 0,7 370 268
Restraint rope lanyard, non-adjustable, model VBM-R-BS Conform to EN 354
• Universal safety lanyard without energy absorber.
• Kernmantle-rope diameter 12 mm
• End connections: 1 x screw gate snap hook, opening 18 mm, 1 x scaffold hook, opening 60 mm.
Pos. Model EAN-No.
4025092* Length
m Weight
kg
Product group
Cat. page
1 VBM-R-BS *931113 2.0 0,4 370 268
Restraint rope lanyard, non-adjustable, model VBM-KV Conform to EN 354
• Universal safety lanyard without energy absorber, with buckle.
• Kernmantle-rope diameter 12 mm
• End connections: 2 x standard snap hook, opening 18 mm.
Pos. Model EAN-No.
4025092* Length
m Weight
kg
Product group
Cat. page
1 VBM-KV *280792 1.5 0,4 370 268
Restraint rope lanyard, non-adjustable, model VBM-W Conform to EN 354
• Universal safety wire rope lanyard without energy absorber.
• Wire - rope diameter 8 mm, mantled, can be used as an anchoring lanyard
• End connections: wire rope with two eyes at the end.
Pos. Model EAN-No.
4025092* Length
m Weight
kg
Product group
Cat. page
1 VBM-W *932769 2.0 0,6 370 268
13
Personal Protective Equipment Lanyards
Webbing slings model AVM-G and model AVM-G 45 Conform to EN 354
Webbing slings to be used as an anchor point.
• Model AVM-G 45 is equipped with 45 mm width special reinforced webbing and synthetic rubber.
Pos. Model EAN-No.
4025092* Length
m Weight
kg
Product group
Cat. page
1 AVM-G 060 *165242 0.6 0,1 370 268
2 AVM-G 120 *930932 1.2 0,2 370 268
3 AVM-G 150 *240956 1.5 0,2 370 268
4 AVM-G 45-90 *932967 0.9 0,6 370 268
5 AVM-G 45-140 *288736 1.4 0,8 370 268
Shock-absorbing lanyard model BFD-K Conform to EN 355
• Abrasion proof webbing with energy absorber.
• Width 30 mm
• End connections: 1 x screw gate snap hook, opening 18 mm, 1 x standard snap hook, opening 18 mm.
Pos. Model EAN-No.
4025092* Length
m Weight
kg
Product group
Cat. page
1 BFD-K 1,5 *188494 1.5 0,8 370 268
2 BFD-K 2,0 *165327 2.0 0,9 370 268
Shock-absorbing lanyard model BFD-R Conform to EN 355
• Abrasion-proof webbing with energy absorber.
• Width 30 mm
• End connections: 1 x standard snap hook, opening 18 mm, 1 x scaffold hook, opening 60 mm.
Pos. Model EAN-No.
4025092* Length
m Weight
kg
Product group
Cat. page
1 BFD-R 1,5 *188500 1.5 1,0 370 –
2 BFD-R 2,0 *165341 2.0 1,1 370 –
14
Personal Protective Equipment Lanyards
Fall arrest lanyard model FD-M Conform to EN 355
• Very light and integrated absorbing lanyard.
• Mantled for improved abrasion protection.
• End connections: 1 x twistlock-carabiner, 1 x alu overhead-line hook (model FD-M-FR), opening 110 mm or aluminium scaffolding hook (model FD-M-R), opening 60 mm.
Pos. Model EAN-No.
4025092* Length
m Weight
kg
Product group
Cat. page
1 FD-M-R 1,6 *471718 1.6 0,9 370 269
2 FD-M-FR 1,6 *471695 1.6 1,4 370 269
Shock-absorbing lanyard model BFD-E Conform to EN 355
• Single stranded elastic and stretchable absorbing lanyard for increased wearing comfort.
• End connections: 1 x twistlock-carabiner, 1 x aluminium scaffolding hook, opening 60 mm (model BFD-E-R) 1 x alu overhead-line hook, opening 110 mm (model BFD-E-FR).
Pos. Model EAN-No.
4025092* Length
m Weight
kg
Product group
Cat. page
1 BFD-E-R 2,0 *471633 2.0 1,5 370 269
2 BFD-E-FR 2,0 *471619 2.0 2,0 370 269
Shock absorbing lanyard model BFD-12KM-R Conform to EN 355
• 12 mm kernmantle rope.
• End connections: 1 x twistlock-carabiner 1 x aluminium scaffolding hook, opening 60 mm
Pos. Model EAN-No.
4025092* Length
m Weight
kg
Product group
Cat. page
1 BFD-12KM-R 1,5 *354578 1.5 1,4 370 269
2 BFD-12KM-R 2,0 *354608 2.0 1,6 370 269
15
Personal Protective Equipment Lanyards
Pos. Model EAN-No. 4025092*
Length m
Weight
kg
Product group
Cat. page
1 BFD-T *165334 2.0 1,4 370 270
Pos. Model EAN-No. 4025092*
Length m
Weight
kg
Product group
Cat. page
1 BFD-FF-TR 1,5 *280921 1.5 1,4 370 270
2 BFD-FF-TR 2,0 *471732 2.0 1,6 370 270
Twin tail shock-absorbing lanyard model BFD-T Conform to EN 355
• Webbing with abrasion resistant.
• Width 30 mm
• End connections: 1 x standard snap hook, opening 18 mm, 2 x scaffolding hook, opening 60 mm.
Twin tail shock-absorbing lanyard model BFD-E Conform to EN 355
• With elastic and stretchable absorbing lanyard.
• End connections: 1 x twistlock-carabiner 2 x scaffolding hook, opening 60 mm (model BFD-E-TR) 2 x alu overhead-line hook, opening 110 mm (model BFD-E-TFR).
Model BFD-E-TR Pos. Model EAN-No.
4025092* Length
m Weight kg
Product group
Cat. page
1 BFD-E-TR 2,0 *471671 2.0 1,4 370 270
2 BFD-E-TFR 2,0 *471657 2.0 2,6 370 270
3 BFD-E-TRI-TFR 2,0 *930314 2.0 2,6 370 270
4 BFD-E-TR-ST 2,0 *327442 2.0 1,6 370 270
Model BFD-E-TFR
Twin tail shock-absorbing lanyard model BFD-FF-TR Conform to EN 355
• With 11 mm non flammable kernmantle special aramid rope.
• End connections: 1 x twistlock-carabiner, opening 23 mm, 2 x scaffolding hook, opening 60 mm.
Twin tail shock-absorbing lanyard model BFD-12KM-TR Conform to EN 355
• With 12 mm kernmantle absorbing rope lanyard.
• End connections: 1 x twistlock-carabiner, opening 23 mm, 2 x scaffolding hook, opening 60 mm.
Other lengths, other diameters for kernmantle
ropes or carabiners on request!
Pos. Model EAN-No.
4025092* Length
m Weight
kg
Product group
Cat. page
1 BFD-12KM-TR 1,5 *354851 1.5 1,4 370 –
2 BFD-12KM-TR 2,0 *354929 2.0 1,6 370 –
16
Personal Protective Equipment Work positioning devices & Fall arrest blocks
Work positioning devices model PHS-K and model PHS-KS Conform to EN 358
• Protective sleeve for protection of the rope against abrasion and dirt.
• With rope shortener to adjust the length of the rope with srew steel carabiner.
• Kernmantle rope diameter 14 mm (model PHS-K) or 16 mm (model PHS-KS).
• Model PHS-KS with kernmantle rope and integrated steel core.
• End connections: 1 x screw gate snap hook, opening 18 mm, 1 x standard snap hook, opening 18 mm.
Model PHS-K
Pos. Model EAN-No. 4025092*
Length m
Weight
kg
Product group
Cat. page
1 PHS-K 1,5 *280983 1.5 0,9 370 270
2 PHS-K 2,0 *165358 2.0 1,0 370 270
3 PHS-KS 3,0 *470872 3.0 1,9 370 270
4 PHS-KS 4,0 *470858 4.0 2,3 370 270
Model PHS-KS
Retractable fall arrest block model HSG-G-6 Conform to EN 360
• Plastic housing
• Fall indicator with swivel twistlock carabiner
• Webbing band
• Rope length 6 m
• Suitable up to 120 kg
Pos. Model EAN-No.
4025092* Length
m Weight
kg
Product group
Cat. page
1 HSG-G-6 *470728 6.0 1,7 370 271
17
Personal Protective Equipment Fall arrest blocks
Retractable fall arrest block model HSG-S Conform to EN 360
• Plastic housing
• Fall indicator
• Galvanized steel wire rope
• End connection: swivel twist lock carabiner AXK 10 S I, opening 23 mm
• Suitable up to 120 kg
Pos. Model EAN-No.
4025092* Length
m Weight
kg
Product group
Cat. page
1 HSG-S-6 *165006 6.0 5,1 370 271
2 HSG-S-10 *165013 10.0 5,3 370 271
3 HSG-S-15 *165020 15.0 6,1 370 271
4 HSG-S-20 *165037 20.0 11,0 370 271
5 HSG-S-25 *165044 25.0 11,4 370 271
6 HSG-S-28 *165068 28.0 11,7 370 271
Retractable fall arrest block model HSG-G Conform to EN 360
• Plastic housing
• Fall indicator
• Abrasion resistant 45 mm webbing with coming out forces under 3 kN.
• End connections: 1 x screw gate snap hook, opening 18 mm, 1 x carabiner AXK 10 S, opening 22 mm.
• Suitable up to 120 kg
Pos. Model EAN-No.
4025092* Length
m Weight
kg
Product group
Cat. page
1 HSG-G *165075 2.25 1,1 370 271
Retractable fall arrest block model HSG-G-ACB Conform to EN 360
• Aluminium housing
• Abrasion resistant 30 mm webbing with coming out forces under 3 kN.
• End connections: 1 x screw gate snap hook, opening 18 mm, 1 x carabiner AXK 10 S, opening 22 mm.
• Suitable up to 120 kg
Pos. Model EAN-No.
4025092* Length
m Weight
kg
Product group
Cat. page
1 HSG-G-ACB *289832 1.8 0,9 370 271
18
Personal Protective Equipment Accessories
Storage
Pos. Model EAN-No.
4025092* Dimensions
mm Weight
kg
Product group
Cat. page
1 Backpack small *165211 380 x 300 x 140 0,2 370 272
2 Large plastic box *530538 580 x 290 x 280 1,9 370 272
3 Medium-sized plastic box *165228 310 x 410 x 180 1,4 370 272
4 Aluminium box for max. 120 m safety rope *281669 394 x 298 x 345 2,7 370 272
5 Aluminium box with up to 120 m safety rope *281768 582 x 382 x 415 4,2 370 272
6 Equipment bag medium *530644 600 x 450 x 450 0,5 370 272
7 Equipment bag small *282529 300 x 400 0,4 370 272
Accessories for rescue Offshore vest Edge protection Rescue clamp 8-13 mm Rescue triangle RT1
Pos. Model EAN-No.
4025092* Description Weight
kg
Product group
Cat. page
1 RT1 *930253 rescue triangle with loops, adjustable 0,7 370 272
2 Traumastrap *530590 1,1m length, against hanging trauma 0,2 370 272
3 Rescue stick *281461 for platform/roof rescue w safetyline+carabiner to push the rope away 0,3 370 272
4 Edge protection *281652 for platform/roof rescue incl. safetyline with carabiner 0,5 370 272
5 U-edge protection *281560 special U-edge protection f.e. Nordex windmills 0,7 370 272
6 Rescue clamp *281621 for 12-16 mm safety ropes 0,8 370 272
7 Offshore life vest *281867 especially for harnesses 0,9 370 272
8 Rescue clamp *282888 for 8-13 mm safety ropes 0,1 370 272
9 Running pulley *282468 for cable cabin rescue, to fit on wire ropes with max 60 mm diameter 0,8 370 272
Other accessories for PPE against fall from heights
Attaching help Climbing irons GFD casing shockabsorber for HSG
Pos. Model EAN-No.
4025092* Description Weight
kg
Product group
Cat. page
1 Small tool-bloc HSG *281881 to attach material at a harness 0,3 370 272
2 Climbing irons *281911 for wooden masts with 200 mm, 3 dorns 3,0 370 272
3 Climbing irons *932783 for wooden masts with 275 mm, 3 dorns 3,2 370 272
4 Pulley with automatic stop *281942 for material transport with 20 m rope 2,2 370 272
5 Mobile tanking platform *530675 framework with casters, detectable, working high 2.9 - 4.4 m 370 272
6 Attaching help *932899 max. 140 mm ., type barbecue tong, steel 0,4 370 272
7 GFD casing shockabsorber *472210 8 mm wire rope, 1.8 m length, with two steel loops, for CMCO HSG 1,2 370 272
19
Personal Protective Equipment Descending and hoisting devices
Pos. Model EAN-No. 4025092*
Description Weight
kg
Product group
Cat. page
1 Descending rope 9 mm *549486 for Yalerescue descending devices, per meter 0,05 376 273
2
Vacuum
*288460 vacuumized package with integrated humidity indicator for offshore or marine environment
376
273
3 Yalerescue d *549516 descending system with clamp for a rapid evacuation 1,2 376 273
4 Yalerescue lb *282413 descending system with a lever brake at the side 1,3 376 273
5 Yalerescue up sw *549530 with small hand wheel for hoisting applications 1,3 376 273
6 Yalerescue up a *549554 with big hand wheel for hoisting applications 1,5 376 273
7
Yalerescue up 1sa
*549578 with big hand wheel and one spread adapter for increased stabilization
1,6
376
273
8
Yalerescue up 2sa
*549622 with big hand wheel and two spread adapter for increased stabilization
1,8
376
273
9
Yalerescue up 2sar
*549646 with big hand wheel and two spread round adapter for increased stabilization
1,8
376
273
10 Special wire rope *933919 for Yalerescue w, per meter 0,1 376 273
11
Yalerescue w
*933889 with wire rope, can be used for rapid evacuation from oil- and gas platforms
1,3
376
273
12 Special wire rope brake *933957 for Yalerescue w 3,0 376 273
13 Y-lanyard *933933 for special wire rope brake, attachment lanyard 0,5 376 273
Carabiner Conform to EN 362
Pos. Model EAN-No.
4025092* Carabiner Opening
mm Material Weight
kg
Product group
Cat. page
1 BS-011 *240925 Screw 18 Steel 0,2 329 272
2 BTS-25 *530569 Twistlock 25 Steel 0,2 329 272
3 BTA-25 *530583 Twistlock 25 Alu 0,1 329 272
4 BTRIA-23 *282505 Trilock 23 Alu 0,1 329 272
Alu scaffolding hooks
Pos. Model EAN-No. 4025092*
Scaffolding hooks Opening mm
Weight
kg
Product group
Cat. page
1 R *240932 Alu scaffolding hook (R) 0.5 kg 60 0,4 329 272
2 FR *281195 Alu overhead-line hook (FR) 0.9 kg 110 0,9 329 272
Descending and hoisting devices
model Yalerescue Conform to EN 341 and EN 1496 class A
• With integrated centrifugal force brake for a constant descending speed.
• Colour selection of yellow or blue is made possible by the manufacturer.
• Approved for use by two people.
• Both sides with stitched end terminations and two carabiners.
• Special Yalerescue type w for offshore, oil- and gas industry, with wire rope approved for use by one person.
• Yalerescue lb with lever brake at the side casing.
Model Yalerescue w
Model Yalerescue d
Model Yalerescue up sw
Model Yalerescue up 2sa
Vacuumized package
Wire rope brake
Personal Protective Equipment Tripod, Five leg anchor point & Rescue winches
20
Pos. Model EAN-No. 4025092*
Description Weight
kg
Product group
Cat. page
1 Descending rope 9 mm* *288354 For pulley system model P-Roll, per meter 0,05 376 273
2 R-ST-300 *288316 Standard with 1 to 2 integrated reduced pulleys 1,9 376 273
3 R-ES-300 *288408 Entry with 1 to 3 integrated reduced pulleys 1,9 376 273
*per meter
Pos. Model EAN-No. 4025092*
Height mm
Height, closed/m
Weight
kg
Product group
Cat. page
1 DRB-9 für REW-K *165136 1300 - 2300 1.75 14,3 370 274
2 DRB-11 für REW-11 *281249 1200 - 2950 1.60 19,0 370 274
3 UR 101 pulley *472340 – – 0,4 370 274
Pulley system model P-Roll Conform to EN 341 and EN 1496
• The descent and ascent take place via rope friction.
• The pulley is equipped with one sided free-running to assist the ascent.
• Including a handclamp with carabiner.
Tripod model DRB Conform to EN 795
• With securing device
• Capacity: 500 kg
• Breaking force: 22 kN
• Weight: 14.3 kg (model DRB-9) or 19.0 kg (model DRB-11)
Model UR 101
Model DRB-9
Five leg anchor point model F-DRB
Conform to EN 795
• Including a beam of 2.3 m length
• Including the tripod and two additional legs and accessories
• Total weight 72 kg for tripod, beam and additional legs
• The tripod can be used separately.
Depicted rescue winch optionally available.
Pos. Model EAN-No.
4025092* Height
mm Height,
closed/m Weight
kg
Product group
Cat. page
1 F-DRB-5 *288699 1390 - 2210 1.75 72,0 370 274
Rescue winch model REW-K and model REW-11 Conform to EN 1496 class B
• With integrated automatic brake c/w mounting bracket
• Capacity: 140 kg
• Breaking force: 18 kN
• Galvanized steel rope (diameter: 6.3 mm)
• Incl. mounting bracket for tripod model DRB-9 or model DRB-11.
Hook and pulley included.
Model REW-K
Pos. Model EAN-No.
4025092* Length
m Weight
kg Product group
Cat. page
1 REW-K 20 for DRB-9 *165150 20 13 370 274
2 REW-K 25 for DRB-9 *165167 25 14 370 274
3 REW-11-25 for DRB-11 *281256 25 22.5 370 274
4 REW-11-35 for DRB-11 *281270 35 24.0 370 274
5 REW-11-45 for DRB-11 *281317 45 25.0 370 274
6 REW-11-50 for DRB-11 *281379 50 25.5 370 274
Personal Protective Equipment Rope access
21
Pos. Model EAN-No. 4025092*
Weight
kg
Product group
Cat. page
1 MLA-AC 80 *471800 0,2 370 275
Pos. Model EAN-No. 4025092*
Length m
Weight
kg
Product group
Cat. page
1 KMS-AC 80-10 *471756 10 0,9 370 275
2 KMS-AC 80-20 *471824 20 1,8 370 275
3 KMS-AC 80-30 *471862 30 2,7 370 275
4 KMS-AC 80-40 *471886 40 3,6 370 275
5 KMS-AC 80-50 *472180 50 4,5 370 275
Descending system
model AG-SR Conform to EN 341 class C
• Rope friction system with rope lever
• To use with our 11 mm working rope
• Max. 200 m descending height with 2 persons
• Rope is not removable
Pos. Model EAN-No.
4025092* Description Weight
kg
Product group
Cat. page
1 AG-SR 40 *470780 kit incl. 40 m rope, carabiners, knife, lanyard and bag 4,6 370 275
2 AG-SR 70 *470803 kit incl. 70 m rope, carabiners, knife, lanyard and bag 6,9 370 275
3 AG-SR 100 *470766 kit incl. 100 m rope, carabiners, knife, lanyard and bag 9,4 370 275
5 Forklift rescue *355032 kit with AG-SR, 15 m rope, harness, bag and carabiner 2,6 370 275
Model BSK 202r
Accessories for rope access
Model HSK 212r Helmet Pulley
Gloves
Pos. Model EAN-No.
4025092* Description Weight
kg
Product group
Cat. page
1 Double pulley *281959 closed, to be used on ropes with max. 13 mm diameter 0,25 370 275
2 BSK 202r *472401 chest clamp 0,2 370 275
3 HSK 212r *530514 hand clamp 0,3 370 275
4 Helmet *282949 EN 397, type mountaineering, with skin closing 0,4 370 275
5 Gloves *282925 type climbing with kevlar protection on the inside 0,1 370 275
6 Pulley *282444 openable, to be used on rope max. 14 mm diameter, 0,3 370 275
Fall arrest system
model MLA-AC 80 Conform to EN 353-2
• Openable, self running system
• Max. working height 50 m
• With integrated positioning locking device
Model MLA-AC 80
Kernmantle rope
model KMS-AC 80 Conform to EN 353-2
• To be used with fall arrest system MLA-AC 80
• Diameter 12 mm
• End connection: with a loop at both ends.
Only in combination with Polyamide-Kernmantle rope model KMS-AC 12 mm.
22
Personal Protective Equipment Anchor points
Anchor points Conform to EN 795
Model AP-M-AC 25
Model AP-M 10
Model AP-M 20
Secu rope
Pos. Model EAN-No.
4025092* Description Weight
kg
Product group
Cat. page
1 AP-M-AC 25 *472173 aluminium beam clamp for 95-400 mm flanges 1,4 370 276
2 AP-M-AC 34 *472241 permanent stainless steel clamp, for horizontal use 2,5 370 276
3 AP-M 20 *472272 permanent steel clamp, for 80-180 mm flanges 4,0 370 276
4 AP-M 10 *472296 anchor beam trolley for 65-120 mm flanges 5,2 370 276
5 AP-M-M 1 *472319 roof cross with anchoring material, 12 x 18,5 kg 260,0 370 276
6 MMP-150 *549660 David arm, aluminium round profile, traversable 12,0 370 276
7 KB-150 *549684 ground sleeve for david arm MMP-150, galvanized steel 13,1 370 276
8 KW-150 *549714 wall sleeve for david arm MMP-150, galvanized steel 5,5 370 276
9 AP Cambium Saver *932875 special webbing 1.2 m length, with different sized eyes 0,5 370 276
10 HL-M-AE 10 m *932943 mobile horizontale life line with ratchet 3,2 370 276
11 HL-M-AE 20 m *288590 mobile horizontale life line with ratchet 4,2 370 276
12 AP-E-150 *288576 permanent anchor point for one person, 0.3 kg, yellow 0,3 370 276
13
Secu rope 14 m
*287272 kernmantle rope 14 mm, with rope shortener and 1 additonal carabiner
2,3
370
276
14
Secu rope 21 m
*288712 kernmantle rope 14 mm, with rope shortener and 2 additonal carabiner
2,7
370
276
Further information and pictures on request.
Special anchor points
for roof, walls and bricks Conform to EN 795
Model AP-Top
Model AP VA detachable socket pin
Model AP VA for seam roofs
Model AP VA for sheet metal roofs
Pos. Model EAN-No.
4025092* Description Weight
kg
Product group
Cat. page
1
AP-Top, no roof penetration required, licensed for 3 persons
*926904 for welding on bitumen, with 2 m cross braces incl. installation material
10,0
370
276
2 AP VA trapezoidal sheet, licensed for 3 persons *918824 including ground plate 290 x 200 mm 2,6 370 276
3 AP VA sandwich roof sheet, licensed for 3 persons *918909 including ground plate 372 x 200 mm 4,0 370 276
4 AP VA trapezoidal sheet, licensed for 3 persons *918930 including ground plate 290 x 200 mm 2,8 370 276
5 AP VA wood, licensed for 3 persons *918947 including ground plate 200 x 200 mm 3,1 370 276
6 AP VA solar, licensed for 1 person *918978 for profiles 50 x 50 mm 1,4 370 276
7 AP VA wall and hollow profiles, licensed for 3 persons *918985 incl. support tube and installation material 6,0 370 276
8
AP VA stainless steel roof safety hook, licensed for 3 persons
*919005 incl. installation material, rafter installation done by screwing through the roof
1,3
370
276
9
AP VA for seam roofs, licensed for 1 person
*919104 no roof penetration required, suitable for Kalzip, Interfalz, Bemo or similar systems
0,4
370
276
10 AP VA for rounded edge seam roofs, licensed for 1 person *919135 with a seam interval of 300 - 660 mm 3,8 370 276
11 AP VA for standing seam roofs, licensed for 1 person *919227 with a seam interval of 300 - 660 mm 2,8 370 276
12 AP VA for copper standing seam roofs, licensed for 1 person *919241 with a seam interval of 300 - 660 mm 2,8 370 276
13
AP VA for standing seams, licensed for 3 persons
*919272 standing seam, suitable for all rafter intervals, stainless steel, brass clamp
0,7
370
276
14
AP VA for rounded edge seam profiles, licensed for 3 persons
*919388 for Kalzip, Bemo, Interfalz, roofs, stainless steel, alu clamp
1,9
370
276
15
AP VA for copper standing seam roofs, licensed for 3 persons
*919449 for copper standing seam roofs, stainless steel, brass clamp
0,8
370
276
16 AP VA detachable stainless steel socket pin 120 x 50 mm *919500 detactable, 0.2 kg, stainless steel 0,24 370 276
17 AP VA stainless steel socket 100 mm for detachable socket pin *919630 for concrete (also cracked concrete), steel and wood 0,2 370 276
18 AP VA stainless steel socket *919708 with M 22 counter nut 0,13 370 276
19 AP VA for concrete or masonry *919982 thread 100 mm M12 0,25 370 276
20 AP VA for steel *920001 thread 100 mm M12 0,27 370 276
21 AP VA designed for sheet metal roofs *920025 up from 0.88 mm thickness, 100 x 40 mm 0,14 370 276
23
Personal Protective Equipment Fall arrester with rope grab
Pos. Model EAN-No. 4025092*
Description Weight
kg
Product group
Cat. page
1 AFG 5 sw *933988 system glider with swivel and carabiner 1,2 370 277
2 Hike 8 *281010 system glider with energy absorber 1,1 370 277
Fall arrest system on a flexible
anchorage line model MLA-F Conform to EN 353-2
• Self running device with integrated energy absorber.
• Kernmantle - rope diameter Ø 12 mm
• End connection: standard snap hook, opening 18 mm.
Pos. Model EAN-No.
4025092* Rope length
m Weight
kg
Product group
Cat. page
1 MLA-F-5 *928472 5 1,3 370 277
2 MLA-F-10 *928489 10 1,8 370 277
3 MLA-F-15 *928496 15 2,3 370 277
4 MLA-F-20 *928502 20 2,8 370 277
Fall arrest system on a flexible
anchorage line model MLA-K Conform to EN 353-2
• Self running device with integrated energy absorber.
• To be used with CMCO safety rope model KMS-K, Ø 14 mm kernmantle rope.
• End connection: standard snap hook, opening 18 mm.
Pos. Model EAN-No.
4025092* Weight
kg
Product group
Cat. page
1 MLA-K *165204 2,0 370 277
Kernmantle rope model KMS-K Conform to EN 353-2
• To be used with fall arrest system MLA-K.
• Rope diameter Ø 14 mm
• End connection: screw gate snap hook, opening 18 mm.
Pos. Model EAN-No.
4025092* Length
m Weight
kg
Product group
Cat. page
1 KMS-K 10 *240833 10 1,3 370 277
2 KMS-K 20 *165266 20 2,3 370 277
Climbing protection vertical wire rope system Conform to EN 351-1 and prEN 353-1
Available as complete system or for anchoring points up from 15 Kn only with our wire rope, designed to be attached to ladders, including on request.
• Upper anchor point (galvanized or stainless steel)
• 8 mm wire rope (galvanized or stainless steel)
• Bottom anchor point (galvanized or stainless steel) including installation material
• Intermediate bracket
• Labelling and markings
Both systems comply with the lastest European rules of technology EN353-1.
In addition system AFG 5 also complies with the rules of ANSI and the CSA Norm.
Model AFG 5 sw
24
Personal Protective Equipment Height safety kits
Pos. Model EAN-No. 4025092*
Weight
kg
Product group
Cat. page
1 Restraint kit *164764 1,5 370 278
Pos. Model EAN-No. 4025092*
Weight
kg
Product group
Cat. page
1 Basic kit *164771 1,6 370 278
Pos. Model EAN-No. 4025092*
Weight
kg
Product group
Cat. page
1 Scaffolders kit *164788 1,8 370 279
Restraint kit • Single point harness AFG-10
• Restraint rope lanyard, not adjustable, VBM-K
• Kit bag
Basic kit • Single point harness AFG-10
• Shock-absorbing lanyard BFD-K, length: 2.0 m
• Kit bag
Scaffolders kit • Single point harness AFG-10
• Shock-absorbing lanyard BFD-R, length: 2.0 m
• Kit bag
Construction kit • Two point harness AFG-35
• Fall arrest block HSG-G
• Webbing sling AVM-G, length: 0.6 m
• Kit bag
For restraint purposes only! Not to be used for fall arrest!
Pos. Model EAN-No.
4025092* Weight
kg
Product group
Cat. page
1 Construction kit *164795 2,6 370 279
25
Personal Protective Equipment Height safety kits
Construction kit 2 • Single point harness AFG-35
• Fall arrest block HSG-S, length: 10.0 m
• Webbing sling AVM-G, length: 0.6 m
• Carrying case
Pos. Model EAN-No.
4025092* Weight
kg
Product group
Cat. page
1 Construction kit 2 *164818 8,1 370 280
Crane maintenance kit • Single point harness AFG-35
• Shock-absorbing lanyard BFD-T
• Kit bag
Pos. Model EAN-No.
4025092* Weight
kg
Product group
Cat. page
1 Crane maintenance kit *164856 2,8 370 280
Roofers kit • Single point harness AFG-35
• Fall arrester with rope grab MLA-K
• Polyamide kernmantle rope, length: 20.0 m (Rope diameter: 14 mm)
• Webbing sling AVM-G, length: 0.6 m
• Carrying case
Pos. Model EAN-No.
4025092* Weight
kg
Product group
Cat. page
1 Roofers kit *164863 6,2 370 281
Work positioning kit • Single point harness AFG-56
• Fall arrest block HSG-G
• Work positioning device PHS-K, length: 2.0 m
• Kit bag
Pos. Model EAN-No.
4025092* Weight
kg
Product group
Cat. page
1 Work positioning kit *164887 3,9 370 281
26
Industrial Products GmbH
Delivery and payment
Delivery terms are: a) all units except cranes, spreader beams, C-hooks, Material Handling Equipment, scissor elevating platforms, workshop presses and special design in accordance with agreed terms.
b) spare parts, cranes, spreader beams, C-hooks, Material Handling Equipment and special design - always Ex works excluding packing.
The goods remain our property until full payment has been received.
27
Cosmo Petra Safe Lifting Solutions
Hisham El Banna Chairman
Cairo : 127 Ramsis St. Tel : 002 02 5914286 Alex : 13 Edmon Fermon St. Tel : 002 03 4266445 Semouha fax : 002 03 4242563 Mob : +2 010 0033933 Hot line : +2 010 9122744 E-mail : [email protected] Web Site : www.cpworks-eg.com
Partner:
COLUMBUS McKINNON Industrial Products GmbH
Am Lindenkamp 31
D-42549 Velbert
Web Site: www.cmco.eu, www.yale.de
e-mail: [email protected]
Subject to engineering changes and improvements.
No warranty for printing errors or mistakes.
Effective October 2012.
Reproduction or reprinting of this price list can
only be carried out with written permission from
COLUMBUS McKINNON Industrial Products GmbH.
28
Industrial Products GmbH
Products
Hoisting Equipment
Ratchet lever hoists
Hand chain hoists
Corrosion & Explosion protection
Trolleys & Trolley clamps
Electric & Pneumatic chain hoists
Chains & Accessories
Manual winches
Cable puller & Accessories
Electric & Pneumatic winches
Rack & Pinion jacks
Crane systems
Wall-mounted jib crane
Floor-mounted jib crane
Moveable gantry crane
Light crane system
Power supply
Tigrip® Load Hoisting Tackle
Grabs & Clamps
Permanent load lifting magnets
Lifting lugs & C-hooks
Barrel grabs & Crate grabs
Load hoisting tackle for underground
construction
Clamps & Tine hooks
Spreader beams
Crane forks
Tigrip® Crane Weighers
Crane weighers
Load indicator
Textile Lifting Slings
Round slings
Round sling assembly
Webbing slings
Accessories
Lashing Systems
Lashings
Special lashings
Accessories
Personal Protective Equipment
Harnesses
Lanyards
Work positioning devices
Fall arrest blocks
Accessories
Descending and hoisting devices
Tripod & five leg anchor point
Rescue winches
Rope access
Anchor points
Fall arrester with rope grab
Height safety kits
29
Hydraulic Jacks & Tools
Hydraulic cylinders, single-acting
Hydraulic cylinders, double-acting
Hydraulic pumps 700 bar & up to 2000 bar
Foot pump 700 bar
Electric & Pneumatic motorpumps
Electric hydraulic power packs
Hydraulic valves & Accessories
Hydraulic puller & Jacks
Hydraulic tools
Test rig for hoisting equipment
Workshop presses
Workshop Equipment
Jacks
Workshop presses
Service jack
Supporting stand
Repair sets
Workshop cranes
Bolting Technology
Hydraulic torque wrenches
Pneumatic torque wrenches
Hydraulic nut splitters
Flange spreaders
Hydraulic lifting & spreading wedges
Torque multipliers
Torque wrenches
Hydraulic bolt tensioners
Impact sockets
Spring Balancers
Spring tensioners
Spring balancers
Material Handling Equipment
Hand pallet trucks
Hand pallet trucks with weighing system
Scissor pallet trucks
Pallet lift trucks
Manual drive stackers
Electric pedestrian stackers
Elevating platforms
Load Moving Systems
CMCO PL PSA Ex E 09.2012